Web Audio API

Web audio concepts and usage

The Web Audio API involves handling audio operations inside an audio context, and has been designed to allow modular routing. Basic audio operations are performed with audio nodes, which are linked together to form an audio routing graph. Several sources — with different types of channel layout — are supported even within a single context. This modular design provides the flexibility to create complex audio functions with dynamic effects.

Audio nodes are linked into chains and simple webs by their inputs and outputs. They typically start with one or more sources. Sources provide arrays of sound intensities (samples) at very small timeslices, often tens of thousands of them per second. These could be either computed mathematically (such as OscillatorNode), or they can be recordings from sound/video files (like AudioBufferSourceNode and MediaElementAudioSourceNode) and audio streams (MediaStreamAudioSourceNode). In fact, sound files are just recordings of sound intensities themselves, which come in from microphones or electric instruments, and get mixed down into a single, complicated wave.

Outputs of these nodes could be linked to inputs of others, which mix or modify these streams of sound samples into different streams. A common modification is multiplying the samples by a value to make them louder or quieter (as is the case with GainNode). Once the sound has been sufficiently processed for the intended effect, it can be linked to the input of a destination (AudioContext.destination), which sends the sound to the speakers or headphones. This last connection is only necessary if the user is supposed to hear the audio.

A simple, typical workflow for web audio would look something like this:

1. Create audio context
2. Inside the context, create sources — such as <audio>, oscillator, stream
3. Create effects nodes, such as reverb, biquad filter, panner, compressor
4. Choose final destination of audio, for example your system speakers
5. Connect the sources up to the effects, and the effects to the destination.

Timing is controlled with high precision and low latency, allowing developers to write code that responds accurately to events and is able to target specific samples, even at a high sample rate. So applications such as drum machines and sequencers are well within reach.

The Web Audio API also allows us to control how audio is spatialized. Using a system based on a source-listener model, it allows control of the panning model and deals with distance-induced attenuation or doppler shift induced by a moving source (or moving listener).

Web Audio API Interfaces

The Web Audio API has a number of interfaces and associated events, which we have split up into nine categories of functionality.

General audio graph definition

General containers and definitions that shape audio graphs in Web Audio API usage.

AudioContext

The AudioContext interface represents an audio-processing graph built from audio modules linked together, each represented by an AudioNode. An audio context controls the creation of the nodes it contains and the execution of the audio processing, or decoding. You need to create an AudioContext before you do anything else, as everything happens inside a context.

AudioNode

The AudioNode interface represents an audio-processing module like an audio source (e.g. an HTML <audio> or <video> element), audio destination, intermediate processing module (e.g. a filter like BiquadFilterNode, or volume control like GainNode).

AudioParam

The AudioParam interface represents an audio-related parameter, like one of an AudioNode. It can be set to a specific value or a change in value, and can be scheduled to happen at a specific time and following a specific pattern.

The ended event

The ended event is fired when playback has stopped because the end of the media was reached.

Defining audio sources

Interfaces that define audio sources for use in the Web Audio API.

OscillatorNode

The OscillatorNode interface represents a periodic waveform, such as a sine or triangle wave. It is an AudioNode audio-processing module that causes a given frequency of wave to be created.

AudioBuffer

The AudioBuffer interface represents a short audio asset residing in memory, created from an audio file using the AudioContext.decodeAudioData() method, or created with raw data using AudioContext.createBuffer(). Once decoded into this form, the audio can then be put into an AudioBufferSourceNode.

AudioBufferSourceNode

The AudioBufferSourceNode interface represents an audio source consisting of in-memory audio data, stored in an AudioBuffer. It is an AudioNode that acts as an audio source.

MediaElementAudioSourceNode

The MediaElementAudioSourceNode interface represents an audio source consisting of an HTML5 <audio> or <video> element. It is an AudioNode that acts as an audio source.

MediaStreamAudioSourceNode

The MediaStreamAudioSourceNode interface represents an audio source consisting of a WebRTC MediaStream (such as a webcam, microphone, or a stream being sent from a remote computer). It is an AudioNode that acts as an audio source.

Defining audio effects filters

Interfaces for defining effects that you want to apply to your audio sources.

BiquadFilterNode

The BiquadFilterNode interface represents a simple low-order filter. It is an AudioNode that can represent different kinds of filters, tone control devices, or graphic equalizers. A BiquadFilterNode always has exactly one input and one output.

ConvolverNode

The ConvolverNode interface is an AudioNode that performs a Linear Convolution on a given AudioBuffer, and is often used to achieve a reverb effect.

DelayNode

The DelayNode interface represents a delay-line; an AudioNode audio-processing module that causes a delay between the arrival of an input data and its propagation to the output.

DynamicsCompressorNode

The DynamicsCompressorNode interface provides a compression effect, which lowers the volume of the loudest parts of the signal in order to help prevent clipping and distortion that can occur when multiple sounds are played and multiplexed together at once.

GainNode

The GainNode interface represents a change in volume. It is an AudioNode audio-processing module that causes a given gain to be applied to the input data before its propagation to the output.

StereoPannerNode

The StereoPannerNode interface represents a simple stereo panner node  that can be used to pan an audio stream left or right.

WaveShaperNode

The WaveShaperNode interface represents a non-linear distorter. It is an AudioNode that use a curve to apply a waveshaping distortion to the signal. Beside obvious distortion effects, it is often used to add a warm feeling to the signal.

PeriodicWave

Describes a periodic waveform that can be used to shape the output of an OscillatorNode.

Defining audio destinations

Once you are done processing your audio, these interfaces define where to output it.

AudioDestinationNode

The AudioDestinationNode interface represents the end destination of an audio source in a given context — usually the speakers of your device.

MediaStreamAudioDestinationNode

The MediaStreamAudioDestinationNode interface represents an audio destination consisting of a WebRTC MediaStream with a single AudioMediaStreamTrack, which can be used in a similar way to a MediaStream obtained from getUserMedia(). It is an AudioNode that acts as an audio destination.

Data analysis and visualization

If you want to extract time, frequency, and other data from your audio, the AnalyserNode is what you need.

AnalyserNode

The AnalyserNode interface represents a node able to provide real-time frequency and time-domain analysis information, for the purposes of data analysis and visualization.

Splitting and merging audio channels

To split and merge audio channels, you'll use these interfaces.

ChannelSplitterNode

The ChannelSplitterNode interface separates the different channels of an audio source out into a set of mono outputs.

ChannelMergerNode

The ChannelMergerNode interface reunites different mono inputs into a single output. Each input will be used to fill a channel of the output.

Audio spatialization

These interfaces allow you to add audio spatialization panning effects to your audio sources.

AudioListener

The AudioListener interface represents the position and orientation of the unique person listening to the audio scene used in audio spatialization.

PannerNode

The PannerNode interface represents the behavior of a signal in space. It is an AudioNode audio-processing module describing its position with right-hand Cartesian coordinates, its movement using a velocity vector and its directionality using a directionality cone.

Audio processing in JavaScript

You can write JavaScript code to process audio data. To do so, you use the interfaces and events listed below.

ScriptProcessorNode

The ScriptProcessorNode interface allows the generation, processing, or analyzing of audio using JavaScript. It is an AudioNode audio-processing module that is linked to two buffers, one containing the current input, one containing the output. An event, implementing the AudioProcessingEvent interface, is sent to the object each time the input buffer contains new data, and the event handler terminates when it has filled the output buffer with data.

audioprocess (event)

The audioprocess event is fired when an input buffer of a Web Audio API ScriptProcessorNode is ready to be processed.

AudioProcessingEvent

The Web Audio API AudioProcessingEvent represents events that occur when a ScriptProcessorNode input buffer is ready to be processed.

Offline/background audio processing

It is possible to process/render an audio graph very quickly in the background — rendering it to an AudioBuffer rather than to the device's speakers — with the following.

OfflineAudioContext

The OfflineAudioContext interface is an AudioContext interface representing an audio-processing graph built from linked together AudioNodes. In contrast with a standard AudioContext, an OfflineAudioContext doesn't really render the audio but rather generates it, as fast as it can, in a buffer.

complete (event)

The complete event is fired when the rendering of an OfflineAudioContext is terminated.

OfflineAudioCompletionEvent

The OfflineAudioCompletionEvent represents events that occur when the processing of an OfflineAudioContext is terminated. The complete event implements this interface.

Audio Workers

Audio workers provide the ability for direct scripted audio processing to be done inside a web worker context, and are defined by a couple of interfaces (new as of 29th August 2014). These are not implemented in any browsers yet. When implemented, they will replace ScriptProcessorNode, and the other features discussed in the Audio processing in JavaScript section above.

AudioWorkerNode

The AudioWorkerNode interface represents an AudioNode that interacts with a worker thread to generate, process, or analyse audio directly.

AudioWorkerGlobalScope

The AudioWorkerGlobalScope interface is a DedicatedWorkerGlobalScope-derived object representing a worker context in which an audio processing script is run; it is designed to enable the generation, processing, and analysis of audio data directly using JavaScript in a worker thread.

AudioProcessEvent

This is an Event object that is dispatched to AudioWorkerGlobalScope objects to perform processing.

Obsolete interfaces

The following interfaces were defined in old versions of the Web Audio API spec, but are now obsolete and have been replaced by other interfaces.

JavaScriptNode

Used for direct audio processing via JavaScript. This interface is obsolete, and has been replaced by ScriptProcessorNode.

WaveTableNode

Used to define a periodic waveform. This interface is obsolete, and has been replaced by PeriodicWave.

Example

This example shows a wide variety of Web Audio API functions being used. You can see this code in action on the Voice-change-o-matic demo (also check out the full source code at Github) — this is an experimental voice changer toy demo; keep your speakers turned down low when you use it, at least to start!

The Web Audio API lines are highlighted; if you want to find out more about what the different methods, etc. do, have a search around the reference pages.

var audioCtx = new (window.AudioContext || window.webkitAudioContext)(); // define audio context
// Webkit/blink browsers need prefix, Safari won't work without window.
var voiceSelect = document.getElementById("voice"); // select box for selecting voice effect options
var visualSelect = document.getElementById("visual"); // select box for selecting audio visualization options
var mute = document.querySelector('.mute'); // mute button
var drawVisual; // requestAnimationFrame
var analyser = audioCtx.createAnalyser();
var distortion = audioCtx.createWaveShaper();
var gainNode = audioCtx.createGain();
var biquadFilter = audioCtx.createBiquadFilter();
function makeDistortionCurve(amount) { // function to make curve shape for distortion/wave shaper node to use
  var k = typeof amount === 'number' ? amount : 50,
    n_samples = 44100,
    curve = new Float32Array(n_samples),
    deg = Math.PI / 180,
    i = 0,
    x;
  for ( ; i < n_samples; ++i ) {
    x = i * 2 / n_samples - 1;
    curve[i] = ( 3 + k ) * x * 20 * deg / ( Math.PI + k * Math.abs(x) );
  }
  return curve;
};
navigator.getUserMedia (
  // constraints - only audio needed for this app
  {
    audio: true
  },
  // Success callback
  function(stream) {
    source = audioCtx.createMediaStreamSource(stream);
    source.connect(analyser);
    analyser.connect(distortion);
    distortion.connect(biquadFilter);
    biquadFilter.connect(gainNode);
    gainNode.connect(audioCtx.destination); // connecting the different audio graph nodes together
    visualize(stream);
    voiceChange();
  },
  // Error callback
  function(err) {
    console.log('The following gUM error occured: ' + err);
  }
);
function visualize(stream) {
  WIDTH = canvas.width;
  HEIGHT = canvas.height;
  var visualSetting = visualSelect.value;
  console.log(visualSetting);
  if(visualSetting == "sinewave") {
    analyser.fftSize = 2048;
    var bufferLength = analyser.frequencyBinCount; // half the FFT value
    var dataArray = new Uint8Array(bufferLength); // create an array to store the data
    canvasCtx.clearRect(0, 0, WIDTH, HEIGHT);
    function draw() {
      drawVisual = requestAnimationFrame(draw);
      analyser.getByteTimeDomainData(dataArray); // get waveform data and put it into the array created above
      canvasCtx.fillStyle = 'rgb(200, 200, 200)'; // draw wave with canvas
      canvasCtx.fillRect(0, 0, WIDTH, HEIGHT);
      canvasCtx.lineWidth = 2;
      canvasCtx.strokeStyle = 'rgb(0, 0, 0)';
      canvasCtx.beginPath();
      var sliceWidth = WIDTH * 1.0 / bufferLength;
      var x = 0;
      for(var i = 0; i < bufferLength; i++) {
        var v = dataArray[i] / 128.0;
        var y = v * HEIGHT/2;
        if(i === 0) {
          canvasCtx.moveTo(x, y);
        } else {
          canvasCtx.lineTo(x, y);
        }
        x += sliceWidth;
      }
      canvasCtx.lineTo(canvas.width, canvas.height/2);
      canvasCtx.stroke();
    };
    draw();
  } else if(visualSetting == "off") {
    canvasCtx.clearRect(0, 0, WIDTH, HEIGHT);
    canvasCtx.fillStyle = "red";
    canvasCtx.fillRect(0, 0, WIDTH, HEIGHT);
  }
}
function voiceChange() {
  distortion.curve = new Float32Array;
  biquadFilter.gain.value = 0; // reset the effects each time the voiceChange function is run
  var voiceSetting = voiceSelect.value;
  console.log(voiceSetting);
  if(voiceSetting == "distortion") {
    distortion.curve = makeDistortionCurve(400); // apply distortion to sound using waveshaper node
  } else if(voiceSetting == "biquad") {
    biquadFilter.type = "lowshelf";
    biquadFilter.frequency.value = 1000;
    biquadFilter.gain.value = 25; // apply lowshelf filter to sounds using biquad
  } else if(voiceSetting == "off") {
    console.log("Voice settings turned off"); // do nothing, as off option was chosen
  }
}
// event listeners to change visualize and voice settings
visualSelect.onchange = function() {
  window.cancelAnimationFrame(drawVisual);
  visualize(stream);
}
voiceSelect.onchange = function() {
  voiceChange();
}
mute.onclick = voiceMute;
function voiceMute() { // toggle to mute and unmute sound
  if(mute.id == "") {
    gainNode.gain.value = 0; // gain set to 0 to mute sound
    mute.id = "activated";
    mute.innerHTML = "Unmute";
  } else {
    gainNode.gain.value = 1; // gain set to 1 to unmute sound
    mute.id = "";    
    mute.innerHTML = "Mute";
  }
}

Specifications

Browser compatibility

See also

• Using the Web Audio API
• Visualizations with Web Audio API
• Voice-change-O-matic example
• Violent Theremin example
• Web audio spatialisation basics
• Mixing Positional Audio and WebGL
• Developing Game Audio with the Web Audio API
• Porting webkitAudioContext code to standards based AudioContext
• Tones: a simple library for playing specific tones/notes using the Web Audio API.
• howler.js: a JS audio library that defaults to Web Audio API and falls back to HTML5 Audio, as well as providing other useful features.
• Mooog: jQuery-style chaining of AudioNodes, mixer-style sends/returns, and more.
• OpenLang: HTML5 video language lab web application using the Web Audio API to record and combine video and audio from different sources into a single file (source on GitHub)