Documentation

junos_static_route - Manage static IP routes on Juniper JUNOS network devices

New in version 2.4.

Synopsis

  • This module provides declarative management of static IP routes on Juniper JUNOS network devices.

Requirements

The below requirements are needed on the host that executes this module.

  • ncclient (>=v0.5.2)

Parameters

Parameter Choices/Defaults Comments
active
bool
    Choices:
  • no
  • yes ←
Specifies whether or not the configuration is active or deactivated
address
required
Network address with prefix of the static route.

aliases: prefix
aggregate
List of static route definitions
next_hop
required
Next hop IP of the static route.
preference
Global admin preference of the static route.

aliases: admin_distance
provider
Deprecated
Starting with Ansible 2.5 we recommend using connection: network_cli or connection: netconf.
For more information please see the Junos OS Platform Options guide.

A dict object containing connection details.
username
Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.
host
required
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
ssh_keyfile
Specifies the SSH key to use to authenticate the connection to the remote device. This value is the path to the key used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead.
timeout Default:
10
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
password
Specifies the password to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.
port Default:
22
Specifies the port to use when building the connection to the remote device. The port value will default to the well known SSH port of 22 (for transport=cli) or port 830 (for transport=netconf) device.
qualified_next_hop
Qualified next hop IP of the static route. Qualified next hops allow to associate preference with a particular next-hop address.
qualified_preference
Assign preference for qualified next hop.
state
    Choices:
  • present ←
  • absent
State of the static route configuration.

Notes

Note

  • This module requires the netconf system service be enabled on the remote device being managed.
  • Tested against vSRX JUNOS version 15.1X49-D15.4, vqfx-10000 JUNOS Version 15.1X53-D60.4.
  • Recommended connection is netconf. See the Junos OS Platform Options.
  • This module also works with local connections for legacy playbooks.
  • For information on using CLI and netconf see the Junos OS Platform Options guide
  • For more information on using Ansible to manage network devices see the Ansible Network Guide
  • For more information on using Ansible to manage Juniper network devices see https://www.ansible.com/ansible-juniper.

Examples

- name: configure static route
  junos_static_route:
    address: 192.168.2.0/24
    next_hop: 10.0.0.1
    preference: 10
    qualified_next_hop: 10.0.0.2
    qualified_preference: 3
    state: present

- name: delete static route
  junos_static_route:
    address: 192.168.2.0/24
    state: absent

- name: deactivate static route configuration
  junos_static_route:
    address: 192.168.2.0/24
    next_hop: 10.0.0.1
    preference: 10
    qualified_next_hop: 10.0.0.2
    qualified_preference: 3
    state: present
    active: False

- name: activate static route configuration
  junos_static_route:
    address: 192.168.2.0/24
    next_hop: 10.0.0.1
    preference: 10
    qualified_next_hop: 10.0.0.2
    qualified_preference: 3
    state: present
    active: True

- name: Configure static route using aggregate
  junos_static_route:
    aggregate:
    - { address: 4.4.4.0/24, next_hop: 3.3.3.3, qualified_next_hop: 5.5.5.5, qualified_preference: 30 }
    - { address: 5.5.5.0/24, next_hop: 6.6.6.6, qualified_next_hop: 7.7.7.7, qualified_preference: 12 }
    preference: 10

- name: Delete static route using aggregate
  junos_static_route:
    aggregate:
    - address: 4.4.4.0/24
    - address: 5.5.5.0/24
    state: absent

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
diff.prepared
string
when configuration is changed and diff option is enabled.
Configuration difference before and after applying change.

Sample:
[edit routing-options static] route 2.2.2.0/24 { ... } + route 4.4.4.0/24 { next-hop 3.3.3.3; qualified-next-hop 5.5.5.5 { + preference 30; } + preference 10; + }


Status

This module is flagged as preview which means that it is not guaranteed to have a backwards compatible interface.

Support

For more information about Red Hat’s support of this module, please refer to this Knowledge Base article

Author

  • Ganesh Nalawade (@ganeshrn)

Hint

If you notice any issues in this documentation you can edit this document to improve it.