Kernel driver ucd9200

Supported chips:

Author: Guenter Roeck <linux@roeck-us.net>

Description

[From datasheets] UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248 are multi-rail, multi-phase synchronous buck digital PWM controllers designed for non-isolated DC/DC power applications. The devices integrate dedicated circuitry for DC/DC loop management with flash memory and a serial interface to support configuration, monitoring and management.

This driver is a client driver to the core PMBus driver. Please see Documentation/hwmon/pmbus.rst for details on PMBus client drivers.

Usage Notes

This driver does not auto-detect devices. You will have to instantiate the devices explicitly. Please see Documentation/i2c/instantiating-devices for details.

Platform data support

The driver supports standard PMBus driver platform data. Please see Documentation/hwmon/pmbus.rst for details.

Sysfs entries

The following attributes are supported. Limits are read-write; all other attributes are read-only.

in1_label “vin”.
in1_input Measured voltage. From READ_VIN register.
in1_min Minimum Voltage. From VIN_UV_WARN_LIMIT register.
in1_max Maximum voltage. From VIN_OV_WARN_LIMIT register.
in1_lcrit Critical minimum Voltage. VIN_UV_FAULT_LIMIT register.
in1_crit Critical maximum voltage. From VIN_OV_FAULT_LIMIT register.
in1_min_alarm Voltage low alarm. From VIN_UV_WARNING status.
in1_max_alarm Voltage high alarm. From VIN_OV_WARNING status.
in1_lcrit_alarm Voltage critical low alarm. From VIN_UV_FAULT status.
in1_crit_alarm Voltage critical high alarm. From VIN_OV_FAULT status.
in[2-5]_label “vout[1-4]”.
in[2-5]_input Measured voltage. From READ_VOUT register.
in[2-5]_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register.
in[2-5]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register.
in[2-5]_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register.
in[2-5]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
in[2-5]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status.
in[2-5]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status.
in[2-5]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT status.
in[2-5]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT status.
curr1_label “iin”.
curr1_input Measured current. From READ_IIN register.
curr[2-5]_label “iout[1-4]”.
curr[2-5]_input Measured current. From READ_IOUT register.
curr[2-5]_max Maximum current. From IOUT_OC_WARN_LIMIT register.
curr[2-5]_lcrit Critical minimum output current. From IOUT_UC_FAULT_LIMIT register.
curr[2-5]_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register.
curr[2-5]_max_alarm Current high alarm. From IOUT_OC_WARNING status.
curr[2-5]_crit_alarm Current critical high alarm. From IOUT_OC_FAULT status.
power1_input Measured input power. From READ_PIN register.
power1_label “pin”
power[2-5]_input Measured output power. From READ_POUT register.
power[2-5]_label

“pout[1-4]”

The number of output voltage, current, and power attribute sets is determined by the number of enabled rails. See chip datasheets for details.
temp[1-5]_input Measured temperatures. From READ_TEMPERATURE_1 and READ_TEMPERATURE_2 registers. temp1 is the chip internal temperature. temp[2-5] are rail temperatures. temp[2-5] attributes are only created for enabled rails. See chip datasheets for details.
temp[1-5]_max Maximum temperature. From OT_WARN_LIMIT register.
temp[1-5]_crit Critical high temperature. From OT_FAULT_LIMIT register.
temp[1-5]_max_alarm Temperature high alarm.
temp[1-5]_crit_alarm Temperature critical high alarm.
fan1_input Fan RPM. ucd9240 only.
fan1_alarm Fan alarm. ucd9240 only.
fan1_fault Fan fault. ucd9240 only.