|
NAME | SYNOPSIS | DESCRIPTION | USAGE | OPTIONS | VARIABLES | ENVIRONMENT VARIABLES | EXAMPLES | SEE ALSO | COLOPHON |
VGIMPORTCLONE(8) System Manager's Manual VGIMPORTCLONE(8)
vgimportclone - Import a VG from cloned PVs
vgimportclone position_args
[ option_args ]
vgimportclone imports a VG from duplicated PVs, e.g. created by a
hardware snapshot of existing PVs.
A duplicated VG cannot used until it is made to coexist with the
original VG. vgimportclone renames the VG associated with the
specified PVs and changes the associated VG and PV UUIDs.
vgimportclone PV ...
[ -n|--basevgname VG ]
[ -i|--import ]
[ COMMON_OPTIONS ]
Common options for lvm:
[ -d|--debug ]
[ -h|--help ]
[ -q|--quiet ]
[ -t|--test ]
[ -v|--verbose ]
[ -y|--yes ]
[ --commandprofile String ]
[ --config String ]
[ --driverloaded y|n ]
[ --longhelp ]
[ --profile String ]
[ --version ]
-n|--basevgname String
By default the snapshot VG will be renamed to the original
name plus a numeric suffix to avoid duplicate naming (e.g.
'test_vg' would be renamed to 'test_vg1'). This option will
override the base VG name that is used for all VG renames. If
a VG already exists with the specified name a numeric suffix
will be added (like the previous example) to make it unique.
--commandprofile String
The command profile to use for command configuration. See
lvm.conf(5) for more information about profiles.
--config String
Config settings for the command. These override lvm.conf
settings. The String arg uses the same format as lvm.conf, or
may use section/field syntax. See lvm.conf(5) for more
information about config.
-d|--debug ...
Set debug level. Repeat from 1 to 6 times to increase the
detail of messages sent to the log file and/or syslog (if
configured).
--driverloaded y|n
If set to no, the command will not attempt to use device-
mapper. For testing and debugging.
-h|--help
Display help text.
-i|--import
Import exported VGs. Otherwise VGs that have been exported
will not be changed (nor will their associated PVs).
--longhelp
Display long help text.
--profile String
An alias for --commandprofile or --metadataprofile, depending
on the command.
-q|--quiet ...
Suppress output and log messages. Overrides --debug and
--verbose. Repeat once to also suppress any prompts with
answer 'no'.
-t|--test
Run in test mode. Commands will not update metadata. This is
implemented by disabling all metadata writing but nevertheless
returning success to the calling function. This may lead to
unusual error messages in multi-stage operations if a tool
relies on reading back metadata it believes has changed but
hasn't.
-v|--verbose ...
Set verbose level. Repeat from 1 to 4 times to increase the
detail of messages sent to stdout and stderr.
--version
Display version information.
-y|--yes
Do not prompt for confirmation interactively but always assume
the answer yes. Use with extreme caution. (For automatic no,
see -qq.)
PV
Physical Volume name, a device path under /dev. For commands
managing physical extents, a PV positional arg generally
accepts a suffix indicating a range (or multiple ranges) of
physical extents (PEs). When the first PE is omitted, it
defaults to the start of the device, and when the last PE is
omitted it defaults to end. Start and end range (inclusive):
PV[:PE-PE]... Start and length range (counting from 0):
PV[:PE+PE]...
String
See the option description for information about the string
content.
Size[UNIT]
Size is an input number that accepts an optional unit. Input
units are always treated as base two values, regardless of
capitalization, e.g. 'k' and 'K' both refer to 1024. The
default input unit is specified by letter, followed by |UNIT.
UNIT represents other possible input units: bBsSkKmMgGtTpPeE.
b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
m|M is megabytes, g|G is gigabytes, t|T is terabytes, p|P is
petabytes, e|E is exabytes. (This should not be confused with
the output control --units, where capital letters mean
multiple of 1000.)
See lvm(8) for information about environment variables used by lvm.
For example, LVM_VG_NAME can generally be substituted for a required
VG parameter.
An original VG "vg00" has PVs "/dev/sda" and "/dev/sdb". The
corresponding PVs from a hardware snapshot are "/dev/sdc" and
"/dev/sdd". Rename the VG associated with "/dev/sdc" and "/dev/sdd"
from "vg00" to "vg00_snap" (and change associated UUIDs).
vgimportclone --basevgname vg00_snap /dev/sdc /dev/sdd
lvm(8) lvm.conf(5) lvmconfig(8)
pvchange(8) pvck(8) pvcreate(8) pvdisplay(8) pvmove(8) pvremove(8)
pvresize(8) pvs(8) pvscan(8)
vgcfgbackup(8) vgcfgrestore(8) vgchange(8) vgck(8) vgcreate(8)
vgconvert(8) vgdisplay(8) vgexport(8) vgextend(8) vgimport(8)
vgimportclone(8) vgmerge(8) vgmknodes(8) vgreduce(8) vgremove(8)
vgrename(8) vgs(8) vgscan(8) vgsplit(8)
lvcreate(8) lvchange(8) lvconvert(8) lvdisplay(8) lvextend(8)
lvreduce(8) lvremove(8) lvrename(8) lvresize(8) lvs(8) lvscan(8)
lvm-fullreport(8) lvm-lvpoll(8) lvm2-activation-generator(8)
blkdeactivate(8) lvmdump(8)
dmeventd(8) lvmetad(8) lvmpolld(8) lvmlockd(8) lvmlockctl(8) clvmd(8)
cmirrord(8) lvmdbusd(8)
lvmsystemid(7) lvmreport(7) lvmraid(7) lvmthin(7) lvmcache(7)
This page is part of the lvm2 (Logical Volume Manager 2) project.
Information about the project can be found at
⟨http://www.sourceware.org/lvm2/⟩. If you have a bug report for this
manual page, send it to linux-lvm@redhat.com. This page was obtained
from the project's upstream Git repository
⟨git://sourceware.org/git/lvm2.git⟩ on 2017-07-05. If you discover
any rendering problems in this HTML version of the page, or you
believe there is a better or more up-to-date source for the page, or
you have corrections or improvements to the information in this
COLOPHON (which is not part of the original manual page), send a mail
to man-pages@man7.org
Red Hat, Inc. LVM TOOLS 2.02.173(2)-git (2017-06-28) VGIMPORTCLONE(8)
Pages that refer to this page: lvchange(8), lvconvert(8), lvcreate(8), lvdisplay(8), lvextend(8), lvm(8), lvmconfig(8), lvmdiskscan(8), lvm-fullreport(8), lvm-lvpoll(8), lvreduce(8), lvremove(8), lvrename(8), lvresize(8), lvs(8), lvscan(8), pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8), pvremove(8), pvresize(8), pvs(8), pvscan(8), vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgconvert(8), vgcreate(8), vgdisplay(8), vgexport(8), vgextend(8), vgimport(8), vgimportclone(8), vgmerge(8), vgmknodes(8), vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8), vgsplit(8)