|
NAME | SYNOPSIS | DESCRIPTION | USAGE | OPTIONS | VARIABLES | ENVIRONMENT VARIABLES | SEE ALSO | COLOPHON |
VGCFGBACKUP(8) System Manager's Manual VGCFGBACKUP(8)
vgcfgbackup - Backup volume group configuration(s)
vgcfgbackup
[ option_args ]
[ position_args ]
vgcfgbackup creates back up files containing metadata of VGs. If no
VGs are named, back up files are created for all VGs. See
vgcfgrestore for information on using the back up files.
In a default installation, each VG is backed up into a separate file
bearing the name of the VG in the directory /etc/lvm/backup.
To use an alternative back up file, use -f. In this case, when
backing up multiple VGs, the file name is treated as a template, with
%s replaced by the VG name.
NB. This DOES NOT back up the data content of LVs.
It may also be useful to regularly back up the files in /etc/lvm.
vgcfgbackup
[ -f|--file String ]
[ --foreign ]
[ --ignorelockingfailure ]
[ --readonly ]
[ --reportformat basic|json ]
[ COMMON_OPTIONS ]
[ VG ... ]
Common options for lvm:
[ -d|--debug ]
[ -h|--help ]
[ -q|--quiet ]
[ -t|--test ]
[ -v|--verbose ]
[ -y|--yes ]
[ --commandprofile String ]
[ --config String ]
[ --driverloaded y|n ]
[ --longhelp ]
[ --profile String ]
[ --version ]
--commandprofile String
The command profile to use for command configuration. See
lvm.conf(5) for more information about profiles.
--config String
Config settings for the command. These override lvm.conf
settings. The String arg uses the same format as lvm.conf, or
may use section/field syntax. See lvm.conf(5) for more
information about config.
-d|--debug ...
Set debug level. Repeat from 1 to 6 times to increase the
detail of messages sent to the log file and/or syslog (if
configured).
--driverloaded y|n
If set to no, the command will not attempt to use device-
mapper. For testing and debugging.
-f|--file String
Write the backup to the named file. When backing up more than
one VG, the file name is treated as a template, and %s is
replaced by the VG name.
--foreign
Report/display foreign VGs that would otherwise be skipped.
See lvmsystemid(7) for more information about foreign VGs.
-h|--help
Display help text.
--ignorelockingfailure
Allows a command to continue with read-only metadata
operations after locking failures.
--longhelp
Display long help text.
--profile String
An alias for --commandprofile or --metadataprofile, depending
on the command.
-q|--quiet ...
Suppress output and log messages. Overrides --debug and
--verbose. Repeat once to also suppress any prompts with
answer 'no'.
--readonly
Run the command in a special read-only mode which will read
on-disk metadata without needing to take any locks. This can
be used to peek inside metadata used by a virtual machine
image while the virtual machine is running. It can also be
used to peek inside the metadata of clustered VGs when
clustered locking is not configured or running. No attempt
will be made to communicate with the device-mapper kernel
driver, so this option is unable to report whether or not LVs
are actually in use.
--reportformat basic|json
Overrides current output format for reports which is defined
globally by the report/output_format setting in lvm.conf.
basic is the original format with columns and rows. If there
is more than one report per command, each report is prefixed
with the report name for identification. json produces report
output in JSON format. See lvmreport(7) for more information.
-t|--test
Run in test mode. Commands will not update metadata. This is
implemented by disabling all metadata writing but nevertheless
returning success to the calling function. This may lead to
unusual error messages in multi-stage operations if a tool
relies on reading back metadata it believes has changed but
hasn't.
-v|--verbose ...
Set verbose level. Repeat from 1 to 4 times to increase the
detail of messages sent to stdout and stderr.
--version
Display version information.
-y|--yes
Do not prompt for confirmation interactively but always assume
the answer yes. Use with extreme caution. (For automatic no,
see -qq.)
VG
Volume Group name. See lvm(8) for valid names.
String
See the option description for information about the string
content.
Size[UNIT]
Size is an input number that accepts an optional unit. Input
units are always treated as base two values, regardless of
capitalization, e.g. 'k' and 'K' both refer to 1024. The
default input unit is specified by letter, followed by |UNIT.
UNIT represents other possible input units: bBsSkKmMgGtTpPeE.
b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
m|M is megabytes, g|G is gigabytes, t|T is terabytes, p|P is
petabytes, e|E is exabytes. (This should not be confused with
the output control --units, where capital letters mean
multiple of 1000.)
See lvm(8) for information about environment variables used by lvm.
For example, LVM_VG_NAME can generally be substituted for a required
VG parameter.
lvm(8) lvm.conf(5) lvmconfig(8)
pvchange(8) pvck(8) pvcreate(8) pvdisplay(8) pvmove(8) pvremove(8)
pvresize(8) pvs(8) pvscan(8)
vgcfgbackup(8) vgcfgrestore(8) vgchange(8) vgck(8) vgcreate(8)
vgconvert(8) vgdisplay(8) vgexport(8) vgextend(8) vgimport(8)
vgimportclone(8) vgmerge(8) vgmknodes(8) vgreduce(8) vgremove(8)
vgrename(8) vgs(8) vgscan(8) vgsplit(8)
lvcreate(8) lvchange(8) lvconvert(8) lvdisplay(8) lvextend(8)
lvreduce(8) lvremove(8) lvrename(8) lvresize(8) lvs(8) lvscan(8)
lvm-fullreport(8) lvm-lvpoll(8) lvm2-activation-generator(8)
blkdeactivate(8) lvmdump(8)
dmeventd(8) lvmetad(8) lvmpolld(8) lvmlockd(8) lvmlockctl(8) clvmd(8)
cmirrord(8) lvmdbusd(8)
lvmsystemid(7) lvmreport(7) lvmraid(7) lvmthin(7) lvmcache(7)
This page is part of the lvm2 (Logical Volume Manager 2) project.
Information about the project can be found at
⟨http://www.sourceware.org/lvm2/⟩. If you have a bug report for this
manual page, send it to linux-lvm@redhat.com. This page was obtained
from the project's upstream Git repository
⟨git://sourceware.org/git/lvm2.git⟩ on 2017-07-05. If you discover
any rendering problems in this HTML version of the page, or you
believe there is a better or more up-to-date source for the page, or
you have corrections or improvements to the information in this
COLOPHON (which is not part of the original manual page), send a mail
to man-pages@man7.org
Red Hat, Inc. LVM TOOLS 2.02.173(2)-git (2017-06-28) VGCFGBACKUP(8)
Pages that refer to this page: lvchange(8), lvconvert(8), lvcreate(8), lvdisplay(8), lvextend(8), lvm(8), lvmconfig(8), lvmdiskscan(8), lvm-fullreport(8), lvm-lvpoll(8), lvreduce(8), lvremove(8), lvrename(8), lvresize(8), lvs(8), lvscan(8), pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8), pvremove(8), pvresize(8), pvs(8), pvscan(8), vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgconvert(8), vgcreate(8), vgdisplay(8), vgexport(8), vgextend(8), vgimport(8), vgimportclone(8), vgmerge(8), vgmknodes(8), vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8), vgsplit(8)