|
NAME | SYNOPSIS | DESCRIPTION | RETURN VALUE | BUGS | PORTABILITY | SEE ALSO | COLOPHON |
curs_termcap(3X) curs_termcap(3X)
PC, UP, BC, ospeed, tgetent, tgetflag, tgetnum, tgetstr, tgoto, tputs
- direct curses interface to the terminfo capability database
#include <curses.h>
#include <term.h>
extern char PC;
extern char * UP;
extern char * BC;
extern @NCURSES_OSPEED@ ospeed;
int tgetent(char *bp, const char *name);
int tgetflag(char *id);
int tgetnum(char *id);
char *tgetstr(char *id, char **area);
char *tgoto(const char *cap, int col, int row);
int tputs(const char *str, int affcnt, int (*putc)(int));
These routines are included as a conversion aid for programs that use
the termcap library. Their parameters are the same and the routines
are emulated using the terminfo database. Thus, they can only be
used to query the capabilities of entries for which a terminfo entry
has been compiled.
INITIALIZATION
The tgetent routine loads the entry for name. It returns:
1 on success,
0 if there is no such entry (or that it is a generic type, having
too little information for curses applications to run), and
-1 if the terminfo database could not be found.
This differs from the termcap library in two ways:
· The emulation ignores the buffer pointer bp. The termcap
library would store a copy of the terminal description in the
area referenced by this pointer. However, ncurses stores its
terminal descriptions in compiled binary form, which is not
the same thing.
· There is a difference in return codes. The termcap library
does not check if the terminal description is marked with the
generic capability, or if the terminal description has cursor-
addressing.
CAPABILITY VALUES
The tgetflag routine gets the boolean entry for id, or zero if it is
not available.
The tgetnum routine gets the numeric entry for id, or -1 if it is not
available.
The tgetstr routine returns the string entry for id, or zero if it is
not available. Use tputs to output the returned string. The area
parameter is used as follows:
· It is assumed to be the address of a pointer to a buffer
managed by the calling application.
· However, ncurses checks to ensure that area is not NULL, and
also that the resulting buffer pointer is not NULL. If either
check fails, the area parameter is ignored.
· If the checks succeed, ncurses also copies the return value to
the buffer pointed to by area, and the area value will be
updated to point past the null ending this value.
· The return value itself is an address in the terminal
description which is loaded into memory.
Only the first two characters of the id parameter of tgetflag,
tgetnum and tgetstr are compared in lookups.
FORMATTING CAPABILITIES
The tgoto routine expands the given capability using the parameters.
· Because the capability may have padding characters, the output of
tgoto should be passed to tputs rather than some other output
function such as printf.
· While tgoto is assumed to be used for the two-parameter cursor
positioning capability, termcap applications also use it for
single-parameter capabilities.
Doing this shows a quirk in tgoto: most hardware terminals use
cursor addressing with row first, but the original developers of
the termcap interface chose to put the column parameter first.
The tgoto function swaps the order of parameters. It does this
also for calls requiring only a single parameter. In that case,
the first parameter is merely a placeholder.
· Normally the ncurses library is compiled with terminfo support.
In that case, tgoto uses tparm(3X) (a more capable formatter).
The tputs routine is described on the curs_terminfo(3X) manual page.
It can retrieve capabilities by either termcap or terminfo name.
GLOBAL VARIABLES
The variables PC, UP and BC are set by tgetent to the terminfo
entry's data for pad_char, cursor_up and backspace_if_not_bs,
respectively. UP is not used by ncurses. PC is used in the
tdelay_output function. BC is used in the tgoto emulation. The
variable ospeed is set by ncurses in a system-specific coding to
reflect the terminal speed.
Except where explicitly noted, routines that return an integer return
ERR upon failure and OK (SVr4 only specifies "an integer value other
than ERR") upon successful completion.
Routines that return pointers return NULL on error.
If you call tgetstr to fetch ca or any other parameterized string, be
aware that it will be returned in terminfo notation, not the older
and not-quite-compatible termcap notation. This will not cause
problems if all you do with it is call tgoto or tparm, which both
expand terminfo-style strings as terminfo. (The tgoto function, if
configured to support termcap, will check if the string is indeed
terminfo-style by looking for "%p" parameters or "$<..>" delays, and
invoke a termcap-style parser if the string does not appear to be
terminfo).
Because terminfo conventions for representing padding in string
capabilities differ from termcap's, tputs("50"); will put out a
literal "50" rather than busy-waiting for 50 milliseconds. Cope with
it.
Note that termcap has nothing analogous to terminfo's sgr string.
One consequence of this is that termcap applications assume me
(terminfo sgr0) does not reset the alternate character set. This
implementation checks for, and modifies the data shown to the termcap
interface to accommodate termcap's limitation in this respect.
The XSI Curses standard, Issue 4 describes these functions. However,
they are marked TO BE WITHDRAWN and may be removed in future
versions.
Neither the XSI Curses standard nor the SVr4 man pages documented the
return values of tgetent correctly, though all three were in fact
returned ever since SVr1. In particular, an omission in the XSI
Curses documentation has been misinterpreted to mean that tgetent
returns OK or ERR. Because the purpose of these functions is to
provide compatibility with the termcap library, that is a defect in
XCurses, Issue 4, Version 2 rather than in ncurses.
External variables are provided for support of certain termcap
applications. However, termcap applications' use of those variables
is poorly documented, e.g., not distinguishing between input and
output. In particular, some applications are reported to declare
and/or modify ospeed.
The comment that only the first two characters of the id parameter
are used escapes many application developers. The original BSD 4.2
termcap library (and historical relics thereof) did not require a
trailing null NUL on the parameter name passed to tgetstr, tgetnum
and tgetflag. Some applications assume that the termcap interface
does not require the trailing NUL for the parameter name. Taking
into account these issues:
· As a special case, tgetflag matched against a single-character
identifier provided that was at the end of the terminal
description. You should not rely upon this behavior in portable
programs. This implementation disallows matches against single-
character capability names.
· This implementation disallows matches by the termcap interface
against extended capability names which are longer than two
characters.
curses(3X), terminfo(5), term_variables(3X), putc(3).
http://invisible-island.net/ncurses/tctest.html
This page is part of the ncurses (new curses) project. Information
about the project can be found at
⟨https://www.gnu.org/software/ncurses/ncurses.html⟩. If you have a
bug report for this manual page, send it to
bug-ncurses-request@gnu.org. This page was obtained from the
project's upstream Git mirror of the CVS repository
⟨git://ncurses.scripts.mit.edu/ncurses.git⟩ on 2017-07-05. If you
discover any rendering problems in this HTML version of the page, or
you believe there is a better or more up-to-date source for the page,
or you have corrections or improvements to the information in this
COLOPHON (which is not part of the original manual page), send a mail
to man-pages@man7.org
curs_termcap(3X)