|
NAME | SYNOPSIS | DESCRIPTION | EXTENSIONS | FILES | SEE ALSO | AUTHORS | COLOPHON |
terminfo(5) File Formats terminfo(5)
terminfo - terminal capability data base
@TERMINFO@/*/*
Terminfo is a data base describing terminals, used by screen-oriented
programs such as nvi(1), rogue(1) and libraries such as curses(3X).
Terminfo describes terminals by giving a set of capabilities which
they have, by specifying how to perform screen operations, and by
specifying padding requirements and initialization sequences. This
describes ncurses version @NCURSES_MAJOR@.@NCURSES_MINOR@ (patch
@NCURSES_PATCH@).
Terminfo Entry Syntax
Entries in terminfo consist of a sequence of fields:
· Each field ends with a comma “,” (embedded commas may be escaped
with a backslash or written as “\054”).
· White space between fields is ignored.
· The first field in a terminfo entry begins in the first column.
· Newlines and leading whitespace (spaces or tabs) may be used for
formatting entries for readability. These are removed from
parsed entries.
The @INFOCMP@ -f and -W options rely on this to format if-then-
else expressions, or to enforce maximum line-width. The
resulting formatted terminal description can be read by @TIC@.
· The first field for each terminal gives the names which are known
for the terminal, separated by “|” characters.
The first name given is the most common abbreviation for the
terminal (its primary name), the last name given should be a long
name fully identifying the terminal (see longname(3X)), and all
others are treated as synonyms (aliases) for the primary terminal
name.
X/Open Curses advises that all names but the last should be in
lower case and contain no blanks; the last name may well contain
upper case and blanks for readability.
This implementation is not so strict; it allows mixed case in the
primary name and aliases. If the last name has no embedded
blanks, it allows that to be both an alias and a verbose name
(but will warn about this ambiguity).
· Lines beginning with a “#” in the first column are treated as
comments.
While comment lines are legal at any point, the output of
@CAPTOINFO@ and @INFOTOCAP@ (aliases for @TIC@) will move
comments so they occur only between entries.
Terminal names (except for the last, verbose entry) should be chosen
using the following conventions. The particular piece of hardware
making up the terminal should have a root name, thus “hp2621”. This
name should not contain hyphens. Modes that the hardware can be in,
or user preferences, should be indicated by appending a hyphen and a
mode suffix. Thus, a vt100 in 132 column mode would be vt100-w. The
following suffixes should be used where possible:
Suffix Meaning Example
-nn Number of lines on the screen aaa-60
-np Number of pages of memory c100-4p
-am With automargins (usually the default) vt100-am
-m Mono mode; suppress color ansi-m
-mc Magic cookie; spaces when highlighting wy30-mc
-na No arrow keys (leave them in local) c100-na
-nam Without automatic margins vt100-nam
-nl No status line att4415-nl
-ns No status line hp2626-ns
-rv Reverse video c100-rv
-s Enable status line vt100-s
-vb Use visible bell instead of beep wy370-vb
-w Wide mode (> 80 columns, usually 132) vt100-w
For more on terminal naming conventions, see the term(7) manual page.
Terminfo Capabilities Syntax
The terminfo entry consists of several capabilities, i.e., features
that the terminal has, or methods for exercising the terminal's
features.
After the first field (giving the name(s) of the terminal entry),
there should be one or more capability fields. These are boolean,
numeric or string names with corresponding values:
· Boolean capabilities are true when present, false when absent.
There is no explicit value for boolean capabilities.
· Numeric capabilities have a “#” following the name, then an
unsigned decimal integer value.
· String capabilities have a “=” following the name, then an string
of characters making up the capability value.
String capabilities can be split into multiple lines, just as the
fields comprising a terminal entry can be split into multiple
lines. While blanks between fields are ignored, blanks embedded
within a string value are retained, except for leading blanks on
a line.
Any capability can be canceled, i.e., suppressed from the terminal
entry, by following its name with “@” rather than a capability value.
Similar Terminals
If there are two very similar terminals, one (the variant) can be
defined as being just like the other (the base) with certain
exceptions. In the definition of the variant, the string capability
use can be given with the name of the base terminal:
· The capabilities given before use override those in the base type
named by use.
· If there are multiple use capabilities, they are merged in
reverse order. That is, the rightmost use reference is processed
first, then the one to its left, and so forth.
· Capabilities given explicitly in the entry override those brought
in by use references.
A capability can be canceled by placing xx@ to the left of the use
reference that imports it, where xx is the capability. For example,
the entry
2621-nl, smkx@, rmkx@, use=2621,
defines a 2621-nl that does not have the smkx or rmkx capabilities,
and hence does not turn on the function key labels when in visual
mode. This is useful for different modes for a terminal, or for
different user preferences.
An entry included via use can contain canceled capabilities, which
have the same effect as if those cancels were inline in the using
terminal entry.
Predefined Capabilities
The following is a complete table of the capabilities included in a
terminfo description block and available to terminfo-using code. In
each line of the table,
The variable is the name by which the programmer (at the terminfo
level) accesses the capability.
The capname is the short name used in the text of the database, and
is used by a person updating the database. Whenever possible,
capnames are chosen to be the same as or similar to the ANSI
X3.64-1979 standard (now superseded by ECMA-48, which uses identical
or very similar names). Semantics are also intended to match those
of the specification.
The termcap code is the old termcap capability name (some
capabilities are new, and have names which termcap did not
originate).
Capability names have no hard length limit, but an informal limit of
5 characters has been adopted to keep them short and to allow the
tabs in the source file Caps to line up nicely.
Finally, the description field attempts to convey the semantics of
the capability. You may find some codes in the description field:
(P) indicates that padding may be specified
#[1-9] in the description field indicates that the string is passed
through tparm with parms as given (#i).
(P*) indicates that padding may vary in proportion to the number of
lines affected
(#i) indicates the ith parameter.
These are the boolean capabilities:
Variable Cap- TCap Description
Booleans name Code
auto_left_margin bw bw cub1 wraps from
column 0 to last
column
auto_right_margin am am terminal has
automatic margins
back_color_erase bce ut screen erased with
background color
can_change ccc cc terminal can re-
define existing
colors
ceol_standout_glitch xhp xs standout not erased
by overwriting (hp)
col_addr_glitch xhpa YA only positive motion
for hpa/mhpa caps
cpi_changes_res cpix YF changing character
pitch changes
resolution
cr_cancels_micro_mode crxm YB using cr turns off
micro mode
dest_tabs_magic_smso xt xt tabs destructive,
magic so char
(t1061)
eat_newline_glitch xenl xn newline ignored
after 80 cols
(concept)
erase_overstrike eo eo can erase
overstrikes with a
blank
generic_type gn gn generic line type
hard_copy hc hc hardcopy terminal
hard_cursor chts HC cursor is hard to
see
has_meta_key km km Has a meta key
(i.e., sets 8th-bit)
has_print_wheel daisy YC printer needs
operator to change
character set
has_status_line hs hs has extra status
line
hue_lightness_saturation hls hl terminal uses only
HLS color notation
(Tektronix)
insert_null_glitch in in insert mode
distinguishes nulls
lpi_changes_res lpix YG changing line pitch
changes resolution
memory_above da da display may be
retained above the
screen
memory_below db db display may be
retained below the
screen
move_insert_mode mir mi safe to move while
in insert mode
move_standout_mode msgr ms safe to move while
in standout mode
needs_xon_xoff nxon nx padding will not
work, xon/xoff
required
no_esc_ctlc xsb xb beehive (f1=escape,
f2=ctrl C)
no_pad_char npc NP pad character does
not exist
non_dest_scroll_region ndscr ND scrolling region is
non-destructive
non_rev_rmcup nrrmc NR smcup does not
reverse rmcup
over_strike os os terminal can
overstrike
prtr_silent mc5i 5i printer will not
echo on screen
row_addr_glitch xvpa YD only positive motion
for vpa/mvpa caps
semi_auto_right_margin sam YE printing in last
column causes cr
status_line_esc_ok eslok es escape can be used
on the status line
tilde_glitch hz hz cannot print ~'s
(Hazeltine)
transparent_underline ul ul underline character
overstrikes
xon_xoff xon xo terminal uses
xon/xoff handshaking
These are the numeric capabilities:
Variable Cap- TCap Description
Numeric name Code
columns cols co number of columns in
a line
init_tabs it it tabs initially every
# spaces
label_height lh lh rows in each label
label_width lw lw columns in each
label
lines lines li number of lines on
screen or page
lines_of_memory lm lm lines of memory if >
line. 0 means varies
magic_cookie_glitch xmc sg number of blank
characters left by
smso or rmso
max_attributes ma ma maximum combined
attributes terminal
can handle
max_colors colors Co maximum number of
colors on screen
max_pairs pairs pa maximum number of
color-pairs on the
screen
maximum_windows wnum MW maximum number of
definable windows
no_color_video ncv NC video attributes
that cannot be used
with colors
num_labels nlab Nl number of labels on
screen
padding_baud_rate pb pb lowest baud rate
where padding needed
virtual_terminal vt vt virtual terminal
number (CB/unix)
width_status_line wsl ws number of columns in
status line
The following numeric capabilities are present in the SVr4.0 term
structure, but are not yet documented in the man page. They came in
with SVr4's printer support.
Variable Cap- TCap Description
Numeric name Code
bit_image_entwining bitwin Yo number of passes for
each bit-image row
bit_image_type bitype Yp type of bit-image
device
buffer_capacity bufsz Ya numbers of bytes
buffered before
printing
buttons btns BT number of buttons on
mouse
dot_horz_spacing spinh Yc spacing of dots
horizontally in dots
per inch
dot_vert_spacing spinv Yb spacing of pins
vertically in pins
per inch
max_micro_address maddr Yd maximum value in
micro_..._address
max_micro_jump mjump Ye maximum value in
parm_..._micro
micro_col_size mcs Yf character step size
when in micro mode
micro_line_size mls Yg line step size when
in micro mode
number_of_pins npins Yh numbers of pins in
print-head
output_res_char orc Yi horizontal
resolution in units
per line
output_res_horz_inch orhi Yk horizontal
resolution in units
per inch
output_res_line orl Yj vertical resolution
in units per line
output_res_vert_inch orvi Yl vertical resolution
in units per inch
print_rate cps Ym print rate in
characters per
second
wide_char_size widcs Yn character step size
when in double wide
mode
These are the string capabilities:
Variable Cap- TCap Description
String name Code
acs_chars acsc ac graphics charset
pairs, based on
vt100
back_tab cbt bt back tab (P)
bell bel bl audible signal
(bell) (P)
carriage_return cr cr carriage return (P*)
(P*)
change_char_pitch cpi ZA Change number of
characters per inch
to #1
change_line_pitch lpi ZB Change number of
lines per inch to #1
change_res_horz chr ZC Change horizontal
resolution to #1
change_res_vert cvr ZD Change vertical
resolution to #1
change_scroll_region csr cs change region to
line #1 to line #2
(P)
char_padding rmp rP like ip but when in
insert mode
clear_all_tabs tbc ct clear all tab stops
(P)
clear_margins mgc MC clear right and left
soft margins
clear_screen clear cl clear screen and
home cursor (P*)
clr_bol el1 cb Clear to beginning
of line
clr_eol el ce clear to end of line
(P)
clr_eos ed cd clear to end of
screen (P*)
column_address hpa ch horizontal position
#1, absolute (P)
command_character cmdch CC terminal settable
cmd character in
prototype !?
create_window cwin CW define a window #1
from #2,#3 to #4,#5
cursor_address cup cm move to row #1
columns #2
cursor_down cud1 do down one line
cursor_home home ho home cursor (if no
cup)
cursor_invisible civis vi make cursor
invisible
cursor_left cub1 le move left one space
cursor_mem_address mrcup CM memory relative
cursor addressing,
move to row #1
columns #2
cursor_normal cnorm ve make cursor appear
normal (undo
civis/cvvis)
cursor_right cuf1 nd non-destructive
space (move right
one space)
cursor_to_ll ll ll last line, first
column (if no cup)
cursor_up cuu1 up up one line
cursor_visible cvvis vs make cursor very
visible
define_char defc ZE Define a character
#1, #2 dots wide,
descender #3
delete_character dch1 dc delete character
(P*)
delete_line dl1 dl delete line (P*)
dial_phone dial DI dial number #1
dis_status_line dsl ds disable status line
display_clock dclk DK display clock
down_half_line hd hd half a line down
ena_acs enacs eA enable alternate
char set
enter_alt_charset_mode smacs as start alternate
character set (P)
enter_am_mode smam SA turn on automatic
margins
enter_blink_mode blink mb turn on blinking
enter_bold_mode bold md turn on bold (extra
bright) mode
enter_ca_mode smcup ti string to start
programs using cup
enter_delete_mode smdc dm enter delete mode
enter_dim_mode dim mh turn on half-bright
mode
enter_doublewide_mode swidm ZF Enter double-wide
mode
enter_draft_quality sdrfq ZG Enter draft-quality
mode
enter_insert_mode smir im enter insert mode
enter_italics_mode sitm ZH Enter italic mode
enter_leftward_mode slm ZI Start leftward
carriage motion
enter_micro_mode smicm ZJ Start micro-motion
mode
enter_near_letter_quality snlq ZK Enter NLQ mode
enter_normal_quality snrmq ZL Enter normal-quality
mode
enter_protected_mode prot mp turn on protected
mode
enter_reverse_mode rev mr turn on reverse
video mode
enter_secure_mode invis mk turn on blank mode
(characters
invisible)
enter_shadow_mode sshm ZM Enter shadow-print
mode
enter_standout_mode smso so begin standout mode
enter_subscript_mode ssubm ZN Enter subscript mode
enter_superscript_mode ssupm ZO Enter superscript
mode
enter_underline_mode smul us begin underline mode
enter_upward_mode sum ZP Start upward
carriage motion
enter_xon_mode smxon SX turn on xon/xoff
handshaking
erase_chars ech ec erase #1 characters
(P)
exit_alt_charset_mode rmacs ae end alternate
character set (P)
exit_am_mode rmam RA turn off automatic
margins
exit_attribute_mode sgr0 me turn off all
attributes
exit_ca_mode rmcup te strings to end
programs using cup
exit_delete_mode rmdc ed end delete mode
exit_doublewide_mode rwidm ZQ End double-wide mode
exit_insert_mode rmir ei exit insert mode
exit_italics_mode ritm ZR End italic mode
exit_leftward_mode rlm ZS End left-motion mode
exit_micro_mode rmicm ZT End micro-motion
mode
exit_shadow_mode rshm ZU End shadow-print
mode
exit_standout_mode rmso se exit standout mode
exit_subscript_mode rsubm ZV End subscript mode
exit_superscript_mode rsupm ZW End superscript mode
exit_underline_mode rmul ue exit underline mode
exit_upward_mode rum ZX End reverse
character motion
exit_xon_mode rmxon RX turn off xon/xoff
handshaking
fixed_pause pause PA pause for 2-3
seconds
flash_hook hook fh flash switch hook
flash_screen flash vb visible bell (may
not move cursor)
form_feed ff ff hardcopy terminal
page eject (P*)
from_status_line fsl fs return from status
line
goto_window wingo WG go to window #1
hangup hup HU hang-up phone
init_1string is1 i1 initialization
string
init_2string is2 is initialization
string
init_3string is3 i3 initialization
string
init_file if if name of
initialization file
init_prog iprog iP path name of program
for initialization
initialize_color initc Ic initialize color #1
to (#2,#3,#4)
initialize_pair initp Ip Initialize color
pair #1 to
fg=(#2,#3,#4),
bg=(#5,#6,#7)
insert_character ich1 ic insert character (P)
insert_line il1 al insert line (P*)
insert_padding ip ip insert padding after
inserted character
key_a1 ka1 K1 upper left of keypad
key_a3 ka3 K3 upper right of
keypad
key_b2 kb2 K2 center of keypad
key_backspace kbs kb backspace key
key_beg kbeg @1 begin key
key_btab kcbt kB back-tab key
key_c1 kc1 K4 lower left of keypad
key_c3 kc3 K5 lower right of
keypad
key_cancel kcan @2 cancel key
key_catab ktbc ka clear-all-tabs key
key_clear kclr kC clear-screen or
erase key
key_close kclo @3 close key
key_command kcmd @4 command key
key_copy kcpy @5 copy key
key_create kcrt @6 create key
key_ctab kctab kt clear-tab key
key_dc kdch1 kD delete-character key
key_dl kdl1 kL delete-line key
key_down kcud1 kd down-arrow key
key_eic krmir kM sent by rmir or smir
in insert mode
key_end kend @7 end key
key_enter kent @8 enter/send key
key_eol kel kE clear-to-end-of-line
key
key_eos ked kS clear-to-end-of-
screen key
key_exit kext @9 exit key
key_f0 kf0 k0 F0 function key
key_f1 kf1 k1 F1 function key
key_f10 kf10 k; F10 function key
key_f11 kf11 F1 F11 function key
key_f12 kf12 F2 F12 function key
key_f13 kf13 F3 F13 function key
key_f14 kf14 F4 F14 function key
key_f15 kf15 F5 F15 function key
key_f16 kf16 F6 F16 function key
key_f17 kf17 F7 F17 function key
key_f18 kf18 F8 F18 function key
key_f19 kf19 F9 F19 function key
key_f2 kf2 k2 F2 function key
key_f20 kf20 FA F20 function key
key_f21 kf21 FB F21 function key
key_f22 kf22 FC F22 function key
key_f23 kf23 FD F23 function key
key_f24 kf24 FE F24 function key
key_f25 kf25 FF F25 function key
key_f26 kf26 FG F26 function key
key_f27 kf27 FH F27 function key
key_f28 kf28 FI F28 function key
key_f29 kf29 FJ F29 function key
key_f3 kf3 k3 F3 function key
key_f30 kf30 FK F30 function key
key_f31 kf31 FL F31 function key
key_f32 kf32 FM F32 function key
key_f33 kf33 FN F33 function key
key_f34 kf34 FO F34 function key
key_f35 kf35 FP F35 function key
key_f36 kf36 FQ F36 function key
key_f37 kf37 FR F37 function key
key_f38 kf38 FS F38 function key
key_f39 kf39 FT F39 function key
key_f4 kf4 k4 F4 function key
key_f40 kf40 FU F40 function key
key_f41 kf41 FV F41 function key
key_f42 kf42 FW F42 function key
key_f43 kf43 FX F43 function key
key_f44 kf44 FY F44 function key
key_f45 kf45 FZ F45 function key
key_f46 kf46 Fa F46 function key
key_f47 kf47 Fb F47 function key
key_f48 kf48 Fc F48 function key
key_f49 kf49 Fd F49 function key
key_f5 kf5 k5 F5 function key
key_f50 kf50 Fe F50 function key
key_f51 kf51 Ff F51 function key
key_f52 kf52 Fg F52 function key
key_f53 kf53 Fh F53 function key
key_f54 kf54 Fi F54 function key
key_f55 kf55 Fj F55 function key
key_f56 kf56 Fk F56 function key
key_f57 kf57 Fl F57 function key
key_f58 kf58 Fm F58 function key
key_f59 kf59 Fn F59 function key
key_f6 kf6 k6 F6 function key
key_f60 kf60 Fo F60 function key
key_f61 kf61 Fp F61 function key
key_f62 kf62 Fq F62 function key
key_f63 kf63 Fr F63 function key
key_f7 kf7 k7 F7 function key
key_f8 kf8 k8 F8 function key
key_f9 kf9 k9 F9 function key
key_find kfnd @0 find key
key_help khlp %1 help key
key_home khome kh home key
key_ic kich1 kI insert-character key
key_il kil1 kA insert-line key
key_left kcub1 kl left-arrow key
key_ll kll kH lower-left key (home
down)
key_mark kmrk %2 mark key
key_message kmsg %3 message key
key_move kmov %4 move key
key_next knxt %5 next key
key_npage knp kN next-page key
key_open kopn %6 open key
key_options kopt %7 options key
key_ppage kpp kP previous-page key
key_previous kprv %8 previous key
key_print kprt %9 print key
key_redo krdo %0 redo key
key_reference kref &1 reference key
key_refresh krfr &2 refresh key
key_replace krpl &3 replace key
key_restart krst &4 restart key
key_resume kres &5 resume key
key_right kcuf1 kr right-arrow key
key_save ksav &6 save key
key_sbeg kBEG &9 shifted begin key
key_scancel kCAN &0 shifted cancel key
key_scommand kCMD *1 shifted command key
key_scopy kCPY *2 shifted copy key
key_screate kCRT *3 shifted create key
key_sdc kDC *4 shifted delete-
character key
key_sdl kDL *5 shifted delete-line
key
key_select kslt *6 select key
key_send kEND *7 shifted end key
key_seol kEOL *8 shifted clear-to-
end-of-line key
key_sexit kEXT *9 shifted exit key
key_sf kind kF scroll-forward key
key_sfind kFND *0 shifted find key
key_shelp kHLP #1 shifted help key
key_shome kHOM #2 shifted home key
key_sic kIC #3 shifted insert-
character key
key_sleft kLFT #4 shifted left-arrow
key
key_smessage kMSG %a shifted message key
key_smove kMOV %b shifted move key
key_snext kNXT %c shifted next key
key_soptions kOPT %d shifted options key
key_sprevious kPRV %e shifted previous key
key_sprint kPRT %f shifted print key
key_sr kri kR scroll-backward key
key_sredo kRDO %g shifted redo key
key_sreplace kRPL %h shifted replace key
key_sright kRIT %i shifted right-arrow
key
key_srsume kRES %j shifted resume key
key_ssave kSAV !1 shifted save key
key_ssuspend kSPD !2 shifted suspend key
key_stab khts kT set-tab key
key_sundo kUND !3 shifted undo key
key_suspend kspd &7 suspend key
key_undo kund &8 undo key
key_up kcuu1 ku up-arrow key
keypad_local rmkx ke leave
'keyboard_transmit'
mode
keypad_xmit smkx ks enter
'keyboard_transmit'
mode
lab_f0 lf0 l0 label on function
key f0 if not f0
lab_f1 lf1 l1 label on function
key f1 if not f1
lab_f10 lf10 la label on function
key f10 if not f10
lab_f2 lf2 l2 label on function
key f2 if not f2
lab_f3 lf3 l3 label on function
key f3 if not f3
lab_f4 lf4 l4 label on function
key f4 if not f4
lab_f5 lf5 l5 label on function
key f5 if not f5
lab_f6 lf6 l6 label on function
key f6 if not f6
lab_f7 lf7 l7 label on function
key f7 if not f7
lab_f8 lf8 l8 label on function
key f8 if not f8
lab_f9 lf9 l9 label on function
key f9 if not f9
label_format fln Lf label format
label_off rmln LF turn off soft labels
label_on smln LO turn on soft labels
meta_off rmm mo turn off meta mode
meta_on smm mm turn on meta mode
(8th-bit on)
micro_column_address mhpa ZY Like column_address
in micro mode
micro_down mcud1 ZZ Like cursor_down in
micro mode
micro_left mcub1 Za Like cursor_left in
micro mode
micro_right mcuf1 Zb Like cursor_right in
micro mode
micro_row_address mvpa Zc Like row_address #1
in micro mode
micro_up mcuu1 Zd Like cursor_up in
micro mode
newline nel nw newline (behave like
cr followed by lf)
order_of_pins porder Ze Match software bits
to print-head pins
orig_colors oc oc Set all color pairs
to the original ones
orig_pair op op Set default pair to
its original value
pad_char pad pc padding char
(instead of null)
parm_dch dch DC delete #1 characters
(P*)
parm_delete_line dl DL delete #1 lines (P*)
parm_down_cursor cud DO down #1 lines (P*)
parm_down_micro mcud Zf Like
parm_down_cursor in
micro mode
parm_ich ich IC insert #1 characters
(P*)
parm_index indn SF scroll forward #1
lines (P)
parm_insert_line il AL insert #1 lines (P*)
parm_left_cursor cub LE move #1 characters
to the left (P)
parm_left_micro mcub Zg Like
parm_left_cursor in
micro mode
parm_right_cursor cuf RI move #1 characters
to the right (P*)
parm_right_micro mcuf Zh Like
parm_right_cursor in
micro mode
parm_rindex rin SR scroll back #1 lines
(P)
parm_up_cursor cuu UP up #1 lines (P*)
parm_up_micro mcuu Zi Like parm_up_cursor
in micro mode
pkey_key pfkey pk program function key
#1 to type string #2
pkey_local pfloc pl program function key
#1 to execute string
#2
pkey_xmit pfx px program function key
#1 to transmit
string #2
plab_norm pln pn program label #1 to
show string #2
print_screen mc0 ps print contents of
screen
prtr_non mc5p pO turn on printer for
#1 bytes
prtr_off mc4 pf turn off printer
prtr_on mc5 po turn on printer
pulse pulse PU select pulse dialing
quick_dial qdial QD dial number #1
without checking
remove_clock rmclk RC remove clock
repeat_char rep rp repeat char #1 #2
times (P*)
req_for_input rfi RF send next input char
(for ptys)
reset_1string rs1 r1 reset string
reset_2string rs2 r2 reset string
reset_3string rs3 r3 reset string
reset_file rf rf name of reset file
restore_cursor rc rc restore cursor to
position of last
save_cursor
row_address vpa cv vertical position #1
absolute (P)
save_cursor sc sc save current cursor
position (P)
scroll_forward ind sf scroll text up (P)
scroll_reverse ri sr scroll text down (P)
select_char_set scs Zj Select character
set, #1
set_attributes sgr sa define video
attributes #1-#9
(PG9)
set_background setb Sb Set background color
#1
set_bottom_margin smgb Zk Set bottom margin at
current line
set_bottom_margin_parm smgbp Zl Set bottom margin at
line #1 or (if smgtp
is not given) #2
lines from bottom
set_clock sclk SC set clock, #1 hrs #2
mins #3 secs
set_color_pair scp sp Set current color
pair to #1
set_foreground setf Sf Set foreground color
#1
set_left_margin smgl ML set left soft margin
at current
column. See
smgl. (ML is not in
BSD termcap).
set_left_margin_parm smglp Zm Set left (right)
margin at column #1
set_right_margin smgr MR set right soft
margin at current
column
set_right_margin_parm smgrp Zn Set right margin at
column #1
set_tab hts st set a tab in every
row, current columns
set_top_margin smgt Zo Set top margin at
current line
set_top_margin_parm smgtp Zp Set top (bottom)
margin at row #1
set_window wind wi current window is
lines #1-#2 cols
#3-#4
start_bit_image sbim Zq Start printing bit
image graphics
start_char_set_def scsd Zr Start character set
definition #1, with
#2 characters in the
set
stop_bit_image rbim Zs Stop printing bit
image graphics
stop_char_set_def rcsd Zt End definition of
character set #1
subscript_characters subcs Zu List of
subscriptable
characters
superscript_characters supcs Zv List of
superscriptable
characters
tab ht ta tab to next 8-space
hardware tab stop
these_cause_cr docr Zw Printing any of
these characters
causes CR
to_status_line tsl ts move to status line,
column #1
tone tone TO select touch tone
dialing
underline_char uc uc underline char and
move past it
up_half_line hu hu half a line up
user0 u0 u0 User string #0
user1 u1 u1 User string #1
user2 u2 u2 User string #2
user3 u3 u3 User string #3
user4 u4 u4 User string #4
user5 u5 u5 User string #5
user6 u6 u6 User string #6
user7 u7 u7 User string #7
user8 u8 u8 User string #8
user9 u9 u9 User string #9
wait_tone wait WA wait for dial-tone
xoff_character xoffc XF XOFF character
xon_character xonc XN XON character
zero_motion zerom Zx No motion for
subsequent character
The following string capabilities are present in the SVr4.0 term
structure, but were originally not documented in the man page.
Variable Cap- TCap Description
String name Code
alt_scancode_esc scesa S8 Alternate escape
for scancode
emulation
bit_image_carriage_return bicr Yv Move to beginning
of same row
bit_image_newline binel Zz Move to next row
of the bit image
bit_image_repeat birep Xy Repeat bit image
cell #1 #2 times
char_set_names csnm Zy Produce #1'th item
from list of
character set
names
code_set_init csin ci Init sequence for
multiple codesets
color_names colornm Yw Give name for
color #1
define_bit_image_region defbi Yx Define rectangular
bit image region
device_type devt dv Indicate
language/codeset
support
display_pc_char dispc S1 Display PC
character #1
end_bit_image_region endbi Yy End a bit-image
region
enter_pc_charset_mode smpch S2 Enter PC character
display mode
enter_scancode_mode smsc S4 Enter PC scancode
mode
exit_pc_charset_mode rmpch S3 Exit PC character
display mode
exit_scancode_mode rmsc S5 Exit PC scancode
mode
get_mouse getm Gm Curses should get
button events,
parameter #1 not
documented.
key_mouse kmous Km Mouse event has
occurred
mouse_info minfo Mi Mouse status
information
pc_term_options pctrm S6 PC terminal
options
pkey_plab pfxl xl Program function
key #1 to type
string #2 and show
string #3
req_mouse_pos reqmp RQ Request mouse
position
scancode_escape scesc S7 Escape for
scancode emulation
set0_des_seq s0ds s0 Shift to codeset 0
(EUC set 0, ASCII)
set1_des_seq s1ds s1 Shift to codeset 1
set2_des_seq s2ds s2 Shift to codeset 2
set3_des_seq s3ds s3 Shift to codeset 3
set_a_background setab AB Set background
color to #1, using
ANSI escape
set_a_foreground setaf AF Set foreground
color to #1, using
ANSI escape
set_color_band setcolor Yz Change to ribbon
color #1
set_lr_margin smglr ML Set both left and
right margins to
#1, #2. (ML is
not in BSD
termcap).
set_page_length slines YZ Set page length to
#1 lines
set_tb_margin smgtb MT Sets both top and
bottom margins to
#1, #2
The XSI Curses standard added these hardcopy capabilities. They
were used in some post-4.1 versions of System V curses, e.g.,
Solaris 2.5 and IRIX 6.x. Except for YI, the ncurses termcap names
for them are invented. According to the XSI Curses standard, they
have no termcap names. If your compiled terminfo entries use these,
they may not be binary-compatible with System V terminfo entries
after SVr4.1; beware!
Variable Cap- TCap Description
String name Code
enter_horizontal_hl_mode ehhlm Xh Enter horizontal
highlight mode
enter_left_hl_mode elhlm Xl Enter left highlight
mode
enter_low_hl_mode elohlm Xo Enter low highlight
mode
enter_right_hl_mode erhlm Xr Enter right
highlight mode
enter_top_hl_mode ethlm Xt Enter top highlight
mode
enter_vertical_hl_mode evhlm Xv Enter vertical
highlight mode
set_a_attributes sgr1 sA Define second set of
video attributes
#1-#6
set_pglen_inch slength YI Set page length to
#1 hundredth of an
inch (some
implementations use
sL for termcap).
User-Defined Capabilities
The preceding section listed the predefined capabilities. They deal
with some special features for terminals no longer (or possibly
never) produced. Occasionally there are special features of newer
terminals which are awkward or impossible to represent by reusing the
predefined capabilities.
ncurses addresses this limitation by allowing user-defined
capabilities. The @TIC@ and @INFOCMP@ programs provide the -x option
for this purpose. When -x is set, @TIC@ treats unknown capabilities
as user-defined. That is, if @TIC@ encounters a capability name
which it does not recognize, it infers its type (boolean, number or
string) from the syntax and makes an extended table entry for that
capability. The use_extended_names(3X) function makes this
information conditionally available to applications. The ncurses
library provides the data leaving most of the behavior to
applications:
· User-defined capability strings whose name begins with “k” are
treated as function keys.
· The types (boolean, number, string) determined by @TIC@ can be
inferred by successful calls on tigetflag, etc.
· If the capability name happens to be two characters, the
capability is also available through the termcap interface.
While termcap is said to be extensible because it does not use a
predefined set of capabilities, in practice it has been limited to
the capabilities defined by terminfo implementations. As a rule,
user-defined capabilities intended for use by termcap applications
should be limited to booleans and numbers to avoid running past the
1023 byte limit assumed by termcap implementations and their
applications. In particular, providing extended sets of function
keys (past the 60 numbered keys and the handful of special named
keys) is best done using the longer names available using terminfo.
A Sample Entry
The following entry, describing an ANSI-standard terminal, is
representative of what a terminfo entry for a modern terminal
typically looks like.
ansi|ansi/pc-term compatible with color,
am, mc5i, mir, msgr,
colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260
j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303
u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
cr=^M, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
el1=\E[1K, home=\E[H, hpa=\E[%i%p1%dG, ht=\E[I, hts=\EH,
ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
indn=\E[%p1%dS, invis=\E[8m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L,
mc4=\E[4i, mc5=\E[5i, nel=\r\E[S, op=\E[39;49m,
rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, rin=\E[%p1%dT,
rmacs=\E[10m, rmpch=\E[10m, rmso=\E[m, rmul=\E[m,
s0ds=\E(B, s1ds=\E)B, s2ds=\E*B, s3ds=\E+B,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
sgr=\E[0;10%?%p1%t;7%;
%?%p2%t;4%;
%?%p3%t;7%;
%?%p4%t;5%;
%?%p6%t;1%;
%?%p7%t;8%;
%?%p9%t;11%;m,
sgr0=\E[0;10m, smacs=\E[11m, smpch=\E[11m, smso=\E[7m,
smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
u8=\E[?%[;0123456789]c, u9=\E[c, vpa=\E[%i%p1%dd,
Entries may continue onto multiple lines by placing white space at
the beginning of each line except the first. Comments may be
included on lines beginning with “#”. Capabilities in terminfo are
of three types:
· Boolean capabilities which indicate that the terminal has some
particular feature,
· numeric capabilities giving the size of the terminal or the size
of particular delays, and
· string capabilities, which give a sequence which can be used to
perform particular terminal operations.
Types of Capabilities
All capabilities have names. For instance, the fact that ANSI-
standard terminals have automatic margins (i.e., an automatic return
and line-feed when the end of a line is reached) is indicated by the
capability am. Hence the description of ansi includes am. Numeric
capabilities are followed by the character “#” and then a positive
value. Thus cols, which indicates the number of columns the terminal
has, gives the value “80” for ansi. Values for numeric capabilities
may be specified in decimal, octal or hexadecimal, using the C
programming language conventions (e.g., 255, 0377 and 0xff or 0xFF).
Finally, string valued capabilities, such as el (clear to end of line
sequence) are given by the two-character code, an “=”, and then a
string ending at the next following “,”.
A number of escape sequences are provided in the string valued
capabilities for easy encoding of characters there:
· Both \E and \e map to an ESCAPE character,
· ^x maps to a control-x for any appropriate x, and
· the sequences
\n, \l, \r, \t, \b, \f, and \s
produce
newline, line-feed, return, tab, backspace, form-feed, and
space,
respectively.
X/Open Curses does not say what “appropriate x” might be. In
practice, that is a printable ASCII graphic character. The special
case “^?” is interpreted as DEL (127). In all other cases, the
character value is AND'd with 0x1f, mapping to ASCII control codes in
the range 0 through 31.
Other escapes include
· \^ for ^,
· \\ for \,
· \, for comma,
· \: for :,
· and \0 for null.
\0 will produce \200, which does not terminate a string but
behaves as a null character on most terminals, providing CS7 is
specified. See stty(1).
The reason for this quirk is to maintain binary compatibility of
the compiled terminfo files with other implementations, e.g., the
SVr4 systems, which document this. Compiled terminfo files use
null-terminated strings, with no lengths. Modifying this would
require a new binary format, which would not work with other
implementations.
Finally, characters may be given as three octal digits after a \.
A delay in milliseconds may appear anywhere in a string capability,
enclosed in $<..> brackets, as in el=\EK$<5>, and padding characters
are supplied by tputs(3X) to provide this delay.
· The delay must be a number with at most one decimal place of
precision; it may be followed by suffixes “*” or “/” or both.
· A “*” indicates that the padding required is proportional to the
number of lines affected by the operation, and the amount given
is the per-affected-unit padding required. (In the case of
insert character, the factor is still the number of lines
affected.)
Normally, padding is advisory if the device has the xon
capability; it is used for cost computation but does not trigger
delays.
· A “/” suffix indicates that the padding is mandatory and forces a
delay of the given number of milliseconds even on devices for
which xon is present to indicate flow control.
Sometimes individual capabilities must be commented out. To do this,
put a period before the capability name. For example, see the second
ind in the example above.
Fetching Compiled Descriptions
The ncurses library searches for terminal descriptions in several
places. It uses only the first description found. The library has a
compiled-in list of places to search which can be overridden by
environment variables. Before starting to search, ncurses eliminates
duplicates in its search list.
· If the environment variable TERMINFO is set, it is interpreted as
the pathname of a directory containing the compiled description
you are working on. Only that directory is searched.
· If TERMINFO is not set, ncurses will instead look in the
directory $HOME/.terminfo for a compiled description.
· Next, if the environment variable TERMINFO_DIRS is set, ncurses
will interpret the contents of that variable as a list of colon-
separated directories (or database files) to be searched.
An empty directory name (i.e., if the variable begins or ends
with a colon, or contains adjacent colons) is interpreted as the
system location @TERMINFO@.
· Finally, ncurses searches these compiled-in locations:
· a list of directories (@TERMINFO_DIRS@), and
· the system terminfo directory, @TERMINFO@ (the compiled-in
default).
Preparing Descriptions
We now outline how to prepare descriptions of terminals. The most
effective way to prepare a terminal description is by imitating the
description of a similar terminal in terminfo and to build up a
description gradually, using partial descriptions with vi or some
other screen-oriented program to check that they are correct. Be
aware that a very unusual terminal may expose deficiencies in the
ability of the terminfo file to describe it or bugs in the screen-
handling code of the test program.
To get the padding for insert line right (if the terminal
manufacturer did not document it) a severe test is to edit a large
file at 9600 baud, delete 16 or so lines from the middle of the
screen, then hit the “u” key several times quickly. If the terminal
messes up, more padding is usually needed. A similar test can be
used for insert character.
Basic Capabilities
The number of columns on each line for the terminal is given by the
cols numeric capability. If the terminal is a CRT, then the number
of lines on the screen is given by the lines capability. If the
terminal wraps around to the beginning of the next line when it
reaches the right margin, then it should have the am capability. If
the terminal can clear its screen, leaving the cursor in the home
position, then this is given by the clear string capability. If the
terminal overstrikes (rather than clearing a position when a
character is struck over) then it should have the os capability. If
the terminal is a printing terminal, with no soft copy unit, give it
both hc and os. (os applies to storage scope terminals, such as
TEKTRONIX 4010 series, as well as hard copy and APL terminals.) If
there is a code to move the cursor to the left edge of the current
row, give this as cr. (Normally this will be carriage return,
control M.) If there is a code to produce an audible signal (bell,
beep, etc) give this as bel.
If there is a code to move the cursor one position to the left (such
as backspace) that capability should be given as cub1. Similarly,
codes to move to the right, up, and down should be given as cuf1,
cuu1, and cud1. These local cursor motions should not alter the text
they pass over, for example, you would not normally use “cuf1= ”
because the space would erase the character moved over.
A very important point here is that the local cursor motions encoded
in terminfo are undefined at the left and top edges of a CRT
terminal. Programs should never attempt to backspace around the left
edge, unless bw is given, and never attempt to go up locally off the
top. In order to scroll text up, a program will go to the bottom
left corner of the screen and send the ind (index) string.
To scroll text down, a program goes to the top left corner of the
screen and sends the ri (reverse index) string. The strings ind and
ri are undefined when not on their respective corners of the screen.
Parameterized versions of the scrolling sequences are indn and rin
which have the same semantics as ind and ri except that they take one
parameter, and scroll that many lines. They are also undefined
except at the appropriate edge of the screen.
The am capability tells whether the cursor sticks at the right edge
of the screen when text is output, but this does not necessarily
apply to a cuf1 from the last column. The only local motion which is
defined from the left edge is if bw is given, then a cub1 from the
left edge will move to the right edge of the previous row. If bw is
not given, the effect is undefined. This is useful for drawing a box
around the edge of the screen, for example. If the terminal has
switch selectable automatic margins, the terminfo file usually
assumes that this is on; i.e., am. If the terminal has a command
which moves to the first column of the next line, that command can be
given as nel (newline). It does not matter if the command clears the
remainder of the current line, so if the terminal has no cr and lf it
may still be possible to craft a working nel out of one or both of
them.
These capabilities suffice to describe hard-copy and “glass-tty”
terminals. Thus the model 33 teletype is described as
33|tty33|tty|model 33 teletype,
bel=^G, cols#72, cr=^M, cud1=^J, hc, ind=^J, os,
while the Lear Siegler ADM-3 is described as
adm3|3|lsi adm3,
am, bel=^G, clear=^Z, cols#80, cr=^M, cub1=^H, cud1=^J,
ind=^J, lines#24,
Parameterized Strings
Cursor addressing and other strings requiring parameters in the
terminal are described by a parameterized string capability, with
printf-like escapes such as %x in it. For example, to address the
cursor, the cup capability is given, using two parameters: the row
and column to address to. (Rows and columns are numbered from zero
and refer to the physical screen visible to the user, not to any
unseen memory.) If the terminal has memory relative cursor
addressing, that can be indicated by mrcup.
The parameter mechanism uses a stack and special % codes to
manipulate it. Typically a sequence will push one of the parameters
onto the stack and then print it in some format. Print (e.g., "%d")
is a special case. Other operations, including "%t" pop their
operand from the stack. It is noted that more complex operations are
often necessary, e.g., in the sgr string.
The % encodings have the following meanings:
%% outputs “%”
%[[:]flags][width[.precision]][doxXs]
as in printf, flags are [-+#] and space. Use a “:” to allow the
next character to be a “-” flag, avoiding interpreting "%-" as
an operator.
%c print pop() like %c in printf
%s print pop() like %s in printf
%p[1-9]
push i'th parameter
%P[a-z]
set dynamic variable [a-z] to pop()
%g[a-z]/
get dynamic variable [a-z] and push it
%P[A-Z]
set static variable [a-z] to pop()
%g[A-Z]
get static variable [a-z] and push it
The terms "static" and "dynamic" are misleading. Historically,
these are simply two different sets of variables, whose values
are not reset between calls to tparm(3X). However, that fact is
not documented in other implementations. Relying on it will
adversely impact portability to other implementations.
%'c' char constant c
%{nn}
integer constant nn
%l push strlen(pop)
%+, %-, %*, %/, %m
arithmetic (%m is mod): push(pop() op pop())
%&, %|, %^
bit operations (AND, OR and exclusive-OR): push(pop() op pop())
%=, %>, %<
logical operations: push(pop() op pop())
%A, %O
logical AND and OR operations (for conditionals)
%!, %~
unary operations (logical and bit complement): push(op pop())
%i add 1 to first two parameters (for ANSI terminals)
%? expr %t thenpart %e elsepart %;
This forms an if-then-else. The %e elsepart is optional.
Usually the %? expr part pushes a value onto the stack, and %t
pops it from the stack, testing if it is nonzero (true). If it
is zero (false), control passes to the %e (else) part.
It is possible to form else-if's a la Algol 68:
%? c1 %t b1 %e c2 %t b2 %e c3 %t b3 %e c4 %t b4 %e %;
where ci are conditions, bi are bodies.
Use the -f option of @TIC@ or @INFOCMP@ to see the structure of
if-then-else's. Some strings, e.g., sgr can be very complicated
when written on one line. The -f option splits the string into
lines with the parts indented.
Binary operations are in postfix form with the operands in the usual
order. That is, to get x-5 one would use "%gx%{5}%-". %P and %g
variables are persistent across escape-string evaluations.
Consider the HP2645, which, to get to row 3 and column 12, needs to
be sent \E&a12c03Y padded for 6 milliseconds. Note that the order of
the rows and columns is inverted here, and that the row and column
are printed as two digits. Thus its cup capability is
“cup=6\E&%p2%2dc%p1%2dY”.
The Microterm ACT-IV needs the current row and column sent preceded
by a ^T, with the row and column simply encoded in binary,
“cup=^T%p1%c%p2%c”. Terminals which use “%c” need to be able to
backspace the cursor (cub1), and to move the cursor up one line on
the screen (cuu1). This is necessary because it is not always safe
to transmit \n ^D and \r, as the system may change or discard them.
(The library routines dealing with terminfo set tty modes so that
tabs are never expanded, so \t is safe to send. This turns out to be
essential for the Ann Arbor 4080.)
A final example is the LSI ADM-3a, which uses row and column offset
by a blank character, thus “cup=\E=%p1%' '%+%c%p2%' '%+%c”. After
sending “\E=”, this pushes the first parameter, pushes the ASCII
value for a space (32), adds them (pushing the sum on the stack in
place of the two previous values) and outputs that value as a
character. Then the same is done for the second parameter. More
complex arithmetic is possible using the stack.
Cursor Motions
If the terminal has a fast way to home the cursor (to very upper left
corner of screen) then this can be given as home; similarly a fast
way of getting to the lower left-hand corner can be given as ll; this
may involve going up with cuu1 from the home position, but a program
should never do this itself (unless ll does) because it can make no
assumption about the effect of moving up from the home position.
Note that the home position is the same as addressing to (0,0): to
the top left corner of the screen, not of memory. (Thus, the \EH
sequence on HP terminals cannot be used for home.)
If the terminal has row or column absolute cursor addressing, these
can be given as single parameter capabilities hpa (horizontal
position absolute) and vpa (vertical position absolute). Sometimes
these are shorter than the more general two parameter sequence (as
with the hp2645) and can be used in preference to cup. If there are
parameterized local motions (e.g., move n spaces to the right) these
can be given as cud, cub, cuf, and cuu with a single parameter
indicating how many spaces to move. These are primarily useful if
the terminal does not have cup, such as the TEKTRONIX 4025.
If the terminal needs to be in a special mode when running a program
that uses these capabilities, the codes to enter and exit this mode
can be given as smcup and rmcup. This arises, for example, from
terminals like the Concept with more than one page of memory. If the
terminal has only memory relative cursor addressing and not screen
relative cursor addressing, a one screen-sized window must be fixed
into the terminal for cursor addressing to work properly. This is
also used for the TEKTRONIX 4025, where smcup sets the command
character to be the one used by terminfo. If the smcup sequence will
not restore the screen after an rmcup sequence is output (to the
state prior to outputting rmcup), specify nrrmc.
Area Clears
If the terminal can clear from the current position to the end of the
line, leaving the cursor where it is, this should be given as el. If
the terminal can clear from the beginning of the line to the current
position inclusive, leaving the cursor where it is, this should be
given as el1. If the terminal can clear from the current position to
the end of the display, then this should be given as ed. Ed is only
defined from the first column of a line. (Thus, it can be simulated
by a request to delete a large number of lines, if a true ed is not
available.)
Insert/delete line and vertical motions
If the terminal can open a new blank line before the line where the
cursor is, this should be given as il1; this is done only from the
first position of a line. The cursor must then appear on the newly
blank line. If the terminal can delete the line which the cursor is
on, then this should be given as dl1; this is done only from the
first position on the line to be deleted. Versions of il1 and dl1
which take a single parameter and insert or delete that many lines
can be given as il and dl.
If the terminal has a settable scrolling region (like the vt100) the
command to set this can be described with the csr capability, which
takes two parameters: the top and bottom lines of the scrolling
region. The cursor position is, alas, undefined after using this
command.
It is possible to get the effect of insert or delete line using csr
on a properly chosen region; the sc and rc (save and restore cursor)
commands may be useful for ensuring that your synthesized
insert/delete string does not move the cursor. (Note that the
ncurses(3X) library does this synthesis automatically, so you need
not compose insert/delete strings for an entry with csr).
Yet another way to construct insert and delete might be to use a
combination of index with the memory-lock feature found on some
terminals (like the HP-700/90 series, which however also has
insert/delete).
Inserting lines at the top or bottom of the screen can also be done
using ri or ind on many terminals without a true insert/delete line,
and is often faster even on terminals with those features.
The boolean non_dest_scroll_region should be set if each scrolling
window is effectively a view port on a screen-sized canvas. To test
for this capability, create a scrolling region in the middle of the
screen, write something to the bottom line, move the cursor to the
top of the region, and do ri followed by dl1 or ind. If the data
scrolled off the bottom of the region by the ri re-appears, then
scrolling is non-destructive. System V and XSI Curses expect that
ind, ri, indn, and rin will simulate destructive scrolling; their
documentation cautions you not to define csr unless this is true.
This curses implementation is more liberal and will do explicit
erases after scrolling if ndsrc is defined.
If the terminal has the ability to define a window as part of memory,
which all commands affect, it should be given as the parameterized
string wind. The four parameters are the starting and ending lines
in memory and the starting and ending columns in memory, in that
order.
If the terminal can retain display memory above, then the da
capability should be given; if display memory can be retained below,
then db should be given. These indicate that deleting a line or
scrolling may bring non-blank lines up from below or that scrolling
back with ri may bring down non-blank lines.
Insert/Delete Character
There are two basic kinds of intelligent terminals with respect to
insert/delete character which can be described using terminfo. The
most common insert/delete character operations affect only the
characters on the current line and shift characters off the end of
the line rigidly. Other terminals, such as the Concept 100 and the
Perkin Elmer Owl, make a distinction between typed and untyped blanks
on the screen, shifting upon an insert or delete only to an untyped
blank on the screen which is either eliminated, or expanded to two
untyped blanks.
You can determine the kind of terminal you have by clearing the
screen and then typing text separated by cursor motions. Type
“abc def” using local cursor motions (not spaces) between the
“abc” and the “def”. Then position the cursor before the “abc” and
put the terminal in insert mode. If typing characters causes the
rest of the line to shift rigidly and characters to fall off the end,
then your terminal does not distinguish between blanks and untyped
positions. If the “abc” shifts over to the “def” which then move
together around the end of the current line and onto the next as you
insert, you have the second type of terminal, and should give the
capability in, which stands for “insert null”.
While these are two logically separate attributes (one line versus
multi-line insert mode, and special treatment of untyped spaces) we
have seen no terminals whose insert mode cannot be described with the
single attribute.
Terminfo can describe both terminals which have an insert mode, and
terminals which send a simple sequence to open a blank position on
the current line. Give as smir the sequence to get into insert mode.
Give as rmir the sequence to leave insert mode. Now give as ich1 any
sequence needed to be sent just before sending the character to be
inserted. Most terminals with a true insert mode will not give ich1;
terminals which send a sequence to open a screen position should give
it here.
If your terminal has both, insert mode is usually preferable to ich1.
Technically, you should not give both unless the terminal actually
requires both to be used in combination. Accordingly, some non-
curses applications get confused if both are present; the symptom is
doubled characters in an update using insert. This requirement is
now rare; most ich sequences do not require previous smir, and most
smir insert modes do not require ich1 before each character.
Therefore, the new curses actually assumes this is the case and uses
either rmir/smir or ich/ich1 as appropriate (but not both). If you
have to write an entry to be used under new curses for a terminal old
enough to need both, include the rmir/smir sequences in ich1.
If post insert padding is needed, give this as a number of
milliseconds in ip (a string option). Any other sequence which may
need to be sent after an insert of a single character may also be
given in ip. If your terminal needs both to be placed into an
“insert mode” and a special code to precede each inserted character,
then both smir/rmir and ich1 can be given, and both will be used.
The ich capability, with one parameter, n, will repeat the effects of
ich1 n times.
If padding is necessary between characters typed while not in insert
mode, give this as a number of milliseconds padding in rmp.
It is occasionally necessary to move around while in insert mode to
delete characters on the same line (e.g., if there is a tab after the
insertion position). If your terminal allows motion while in insert
mode you can give the capability mir to speed up inserting in this
case. Omitting mir will affect only speed. Some terminals (notably
Datamedia's) must not have mir because of the way their insert mode
works.
Finally, you can specify dch1 to delete a single character, dch with
one parameter, n, to delete n characters, and delete mode by giving
smdc and rmdc to enter and exit delete mode (any mode the terminal
needs to be placed in for dch1 to work).
A command to erase n characters (equivalent to outputting n blanks
without moving the cursor) can be given as ech with one parameter.
Highlighting, Underlining, and Visible Bells
If your terminal has one or more kinds of display attributes, these
can be represented in a number of different ways. You should choose
one display form as standout mode, representing a good, high
contrast, easy-on-the-eyes, format for highlighting error messages
and other attention getters. (If you have a choice, reverse video
plus half-bright is good, or reverse video alone.) The sequences to
enter and exit standout mode are given as smso and rmso,
respectively. If the code to change into or out of standout mode
leaves one or even two blank spaces on the screen, as the TVI 912 and
Teleray 1061 do, then xmc should be given to tell how many spaces are
left.
Codes to begin underlining and end underlining can be given as smul
and rmul respectively. If the terminal has a code to underline the
current character and move the cursor one space to the right, such as
the Microterm Mime, this can be given as uc.
Other capabilities to enter various highlighting modes include blink
(blinking) bold (bold or extra bright) dim (dim or half-bright) invis
(blanking or invisible text) prot (protected) rev (reverse video)
sgr0 (turn off all attribute modes) smacs (enter alternate character
set mode) and rmacs (exit alternate character set mode). Turning on
any of these modes singly may or may not turn off other modes.
If there is a sequence to set arbitrary combinations of modes, this
should be given as sgr (set attributes), taking 9 parameters. Each
parameter is either 0 or nonzero, as the corresponding attribute is
on or off. The 9 parameters are, in order: standout, underline,
reverse, blink, dim, bold, blank, protect, alternate character set.
Not all modes need be supported by sgr, only those for which
corresponding separate attribute commands exist.
For example, the DEC vt220 supports most of the modes:
tparm parameter attribute escape sequence
none none \E[0m
p1 standout \E[0;1;7m
p2 underline \E[0;4m
p3 reverse \E[0;7m
p4 blink \E[0;5m
p5 dim not available
p6 bold \E[0;1m
p7 invis \E[0;8m
p8 protect not used
p9 altcharset ^O (off) ^N (on)
We begin each escape sequence by turning off any existing modes,
since there is no quick way to determine whether they are active.
Standout is set up to be the combination of reverse and bold. The
vt220 terminal has a protect mode, though it is not commonly used in
sgr because it protects characters on the screen from the host's
erasures. The altcharset mode also is different in that it is either
^O or ^N, depending on whether it is off or on. If all modes are
turned on, the resulting sequence is \E[0;1;4;5;7;8m^N.
Some sequences are common to different modes. For example, ;7 is
output when either p1 or p3 is true, that is, if either standout or
reverse modes are turned on.
Writing out the above sequences, along with their dependencies yields
sequence when to output terminfo translation
\E[0 always \E[0
;1 if p1 or p6 %?%p1%p6%|%t;1%;
;4 if p2 %?%p2%|%t;4%;
;5 if p4 %?%p4%|%t;5%;
;7 if p1 or p3 %?%p1%p3%|%t;7%;
;8 if p7 %?%p7%|%t;8%;
m always m
^N or ^O if p9 ^N, else ^O %?%p9%t^N%e^O%;
Putting this all together into the sgr sequence gives:
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p4%t;5%;
%?%p1%p3%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
Remember that if you specify sgr, you must also specify sgr0. Also,
some implementations rely on sgr being given if sgr0 is, Not all
terminfo entries necessarily have an sgr string, however. Many
terminfo entries are derived from termcap entries which have no sgr
string. The only drawback to adding an sgr string is that termcap
also assumes that sgr0 does not exit alternate character set mode.
Terminals with the “magic cookie” glitch (xmc) deposit special
“cookies” when they receive mode-setting sequences, which affect the
display algorithm rather than having extra bits for each character.
Some terminals, such as the HP 2621, automatically leave standout
mode when they move to a new line or the cursor is addressed.
Programs using standout mode should exit standout mode before moving
the cursor or sending a newline, unless the msgr capability,
asserting that it is safe to move in standout mode, is present.
If the terminal has a way of flashing the screen to indicate an error
quietly (a bell replacement) then this can be given as flash; it must
not move the cursor.
If the cursor needs to be made more visible than normal when it is
not on the bottom line (to make, for example, a non-blinking
underline into an easier to find block or blinking underline) give
this sequence as cvvis. If there is a way to make the cursor
completely invisible, give that as civis. The capability cnorm
should be given which undoes the effects of both of these modes.
If your terminal correctly generates underlined characters (with no
special codes needed) even though it does not overstrike, then you
should give the capability ul. If a character overstriking another
leaves both characters on the screen, specify the capability os. If
overstrikes are erasable with a blank, then this should be indicated
by giving eo.
Keypad and Function Keys
If the terminal has a keypad that transmits codes when the keys are
pressed, this information can be given. Note that it is not possible
to handle terminals where the keypad only works in local (this
applies, for example, to the unshifted HP 2621 keys). If the keypad
can be set to transmit or not transmit, give these codes as smkx and
rmkx. Otherwise the keypad is assumed to always transmit.
The codes sent by the left arrow, right arrow, up arrow, down arrow,
and home keys can be given as kcub1, kcuf1, kcuu1, kcud1, and khome
respectively. If there are function keys such as f0, f1, ..., f10,
the codes they send can be given as kf0, kf1, ..., kf10. If these
keys have labels other than the default f0 through f10, the labels
can be given as lf0, lf1, ..., lf10.
The codes transmitted by certain other special keys can be given:
· kll (home down),
· kbs (backspace),
· ktbc (clear all tabs),
· kctab (clear the tab stop in this column),
· kclr (clear screen or erase key),
· kdch1 (delete character),
· kdl1 (delete line),
· krmir (exit insert mode),
· kel (clear to end of line),
· ked (clear to end of screen),
· kich1 (insert character or enter insert mode),
· kil1 (insert line),
· knp (next page),
· kpp (previous page),
· kind (scroll forward/down),
· kri (scroll backward/up),
· khts (set a tab stop in this column).
In addition, if the keypad has a 3 by 3 array of keys including the
four arrow keys, the other five keys can be given as ka1, ka3, kb2,
kc1, and kc3. These keys are useful when the effects of a 3 by 3
directional pad are needed.
Strings to program function keys can be given as pfkey, pfloc, and
pfx. A string to program screen labels should be specified as pln.
Each of these strings takes two parameters: the function key number
to program (from 0 to 10) and the string to program it with.
Function key numbers out of this range may program undefined keys in
a terminal dependent manner. The difference between the capabilities
is that pfkey causes pressing the given key to be the same as the
user typing the given string; pfloc causes the string to be executed
by the terminal in local; and pfx causes the string to be transmitted
to the computer.
The capabilities nlab, lw and lh define the number of programmable
screen labels and their width and height. If there are commands to
turn the labels on and off, give them in smln and rmln. smln is
normally output after one or more pln sequences to make sure that the
change becomes visible.
Tabs and Initialization
If the terminal has hardware tabs, the command to advance to the next
tab stop can be given as ht (usually control I). A “back-tab”
command which moves leftward to the preceding tab stop can be given
as cbt. By convention, if the teletype modes indicate that tabs are
being expanded by the computer rather than being sent to the
terminal, programs should not use ht or cbt even if they are present,
since the user may not have the tab stops properly set. If the
terminal has hardware tabs which are initially set every n spaces
when the terminal is powered up, the numeric parameter it is given,
showing the number of spaces the tabs are set to. This is normally
used by the @TSET@ command to determine whether to set the mode for
hardware tab expansion, and whether to set the tab stops. If the
terminal has tab stops that can be saved in non-volatile memory, the
terminfo description can assume that they are properly set.
Other capabilities include is1, is2, and is3, initialization strings
for the terminal, iprog, the path name of a program to be run to
initialize the terminal, and if, the name of a file containing long
initialization strings. These strings are expected to set the
terminal into modes consistent with the rest of the terminfo
description. They are normally sent to the terminal, by the init
option of the @TPUT@ program, each time the user logs in. They will
be printed in the following order:
run the program
iprog
output is1 is2
set the margins using
mgc, smgl and smgr
set tabs using
tbc and hts
print the file
if
and finally
output is3.
Most initialization is done with is2. Special terminal modes can be
set up without duplicating strings by putting the common sequences in
is2 and special cases in is1 and is3.
A set of sequences that does a harder reset from a totally unknown
state can be given as rs1, rs2, rf and rs3, analogous to is1 , is2 ,
if and is3 respectively. These strings are output by the @RESET@
program, which is used when the terminal gets into a wedged state.
Commands are normally placed in rs1, rs2 rs3 and rf only if they
produce annoying effects on the screen and are not necessary when
logging in. For example, the command to set the vt100 into 80-column
mode would normally be part of is2, but it causes an annoying glitch
of the screen and is not normally needed since the terminal is
usually already in 80 column mode.
The @RESET@ program writes strings including iprog, etc., in the same
order as the init program, using rs1, etc., instead of is1, etc. If
any of rs1, rs2, rs3, or rf reset capability strings are missing, the
@RESET@ program falls back upon the corresponding initialization
capability string.
If there are commands to set and clear tab stops, they can be given
as tbc (clear all tab stops) and hts (set a tab stop in the current
column of every row). If a more complex sequence is needed to set
the tabs than can be described by this, the sequence can be placed in
is2 or if.
Delays and Padding
Many older and slower terminals do not support either XON/XOFF or DTR
handshaking, including hard copy terminals and some very archaic CRTs
(including, for example, DEC VT100s). These may require padding
characters after certain cursor motions and screen changes.
If the terminal uses xon/xoff handshaking for flow control (that is,
it automatically emits ^S back to the host when its input buffers are
close to full), set xon. This capability suppresses the emission of
padding. You can also set it for memory-mapped console devices
effectively that do not have a speed limit. Padding information
should still be included so that routines can make better decisions
about relative costs, but actual pad characters will not be
transmitted.
If pb (padding baud rate) is given, padding is suppressed at baud
rates below the value of pb. If the entry has no padding baud rate,
then whether padding is emitted or not is completely controlled by
xon.
If the terminal requires other than a null (zero) character as a pad,
then this can be given as pad. Only the first character of the pad
string is used.
Status Lines
Some terminals have an extra “status line” which is not normally used
by software (and thus not counted in the terminal's lines
capability).
The simplest case is a status line which is cursor-addressable but
not part of the main scrolling region on the screen; the Heathkit H19
has a status line of this kind, as would a 24-line VT100 with a
23-line scrolling region set up on initialization. This situation is
indicated by the hs capability.
Some terminals with status lines need special sequences to access the
status line. These may be expressed as a string with single
parameter tsl which takes the cursor to a given zero-origin column on
the status line. The capability fsl must return to the main-screen
cursor positions before the last tsl. You may need to embed the
string values of sc (save cursor) and rc (restore cursor) in tsl and
fsl to accomplish this.
The status line is normally assumed to be the same width as the width
of the terminal. If this is untrue, you can specify it with the
numeric capability wsl.
A command to erase or blank the status line may be specified as dsl.
The boolean capability eslok specifies that escape sequences, tabs,
etc., work ordinarily in the status line.
The ncurses implementation does not yet use any of these
capabilities. They are documented here in case they ever become
important.
Line Graphics
Many terminals have alternate character sets useful for forms-
drawing. Terminfo and curses have built-in support for most of the
drawing characters supported by the VT100, with some characters from
the AT&T 4410v1 added. This alternate character set may be specified
by the acsc capability.
Glyph ACS Ascii acsc acsc
Name Name Default Char Value
──────────────────────────────────────────────────────────────────────
arrow pointing right ACS_RARROW > + 0x2b
arrow pointing left ACS_LARROW < , 0x2c
arrow pointing up ACS_UARROW ^ - 0x2d
arrow pointing down ACS_DARROW v . 0x2e
solid square block ACS_BLOCK # 0 0x30
diamond ACS_DIAMOND + ` 0x60
checker board (stipple) ACS_CKBOARD : a 0x61
degree symbol ACS_DEGREE \ f 0x66
plus/minus ACS_PLMINUS # g 0x67
board of squares ACS_BOARD # h 0x68
lantern symbol ACS_LANTERN # i 0x69
lower right corner ACS_LRCORNER + j 0x6a
upper right corner ACS_URCORNER + k 0x6b
upper left corner ACS_ULCORNER + l 0x6c
lower left corner ACS_LLCORNER + m 0x6d
large plus or crossover ACS_PLUS + n 0x6e
scan line 1 ACS_S1 ~ o 0x6f
scan line 3 ACS_S3 - p 0x70
horizontal line ACS_HLINE - q 0x71
scan line 7 ACS_S7 - r 0x72
scan line 9 ACS_S9 _ s 0x73
tee pointing right ACS_LTEE + t 0x74
tee pointing left ACS_RTEE + u 0x75
tee pointing up ACS_BTEE + v 0x76
tee pointing down ACS_TTEE + w 0x77
vertical line ACS_VLINE | x 0x78
less-than-or-equal-to ACS_LEQUAL < y 0x79
greater-than-or-equal-to ACS_GEQUAL > z 0x7a
greek pi ACS_PI * { 0x7b
not-equal ACS_NEQUAL ! | 0x7c
UK pound sign ACS_STERLING f } 0x7d
bullet ACS_BULLET o ~ 0x7e
A few notes apply to the table itself:
· X/Open Curses incorrectly states that the mapping for lantern is
uppercase “I” although Unix implementations use the lowercase “i”
mapping.
· The DEC VT100 implemented graphics using the alternate character
set feature, temporarily switching modes and sending characters
in the range 0x60 (96) to 0x7e (126) (the acsc Value column in
the table).
· The AT&T terminal added graphics characters outside that range.
Some of the characters within the range do not match the VT100;
presumably they were used in the AT&T terminal: board of squares
replaces the VT100 newline symbol, while lantern symbol replaces
the VT100 vertical tab symbol. The other VT100 symbols for
control characters (horizontal tab, carriage return and line-
feed) are not (re)used in curses.
The best way to define a new device's graphics set is to add a column
to a copy of this table for your terminal, giving the character which
(when emitted between smacs/rmacs switches) will be rendered as the
corresponding graphic. Then read off the VT100/your terminal
character pairs right to left in sequence; these become the ACSC
string.
Color Handling
The curses library functions init_pair and init_color manipulate the
color pairs and color values discussed in this section (see
curs_color(3X) for details on these and related functions).
Most color terminals are either “Tektronix-like” or “HP-like”:
· Tektronix-like terminals have a predefined set of N colors (where
N is usually 8), and can set character-cell foreground and
background characters independently, mixing them into N * N
color-pairs.
· On HP-like terminals, the user must set each color pair up
separately (foreground and background are not independently
settable). Up to M color-pairs may be set up from 2*M different
colors. ANSI-compatible terminals are Tektronix-like.
Some basic color capabilities are independent of the color method.
The numeric capabilities colors and pairs specify the maximum numbers
of colors and color-pairs that can be displayed simultaneously. The
op (original pair) string resets foreground and background colors to
their default values for the terminal. The oc string resets all
colors or color-pairs to their default values for the terminal. Some
terminals (including many PC terminal emulators) erase screen areas
with the current background color rather than the power-up default
background; these should have the boolean capability bce.
While the curses library works with color pairs (reflecting the
inability of some devices to set foreground and background colors
independently), there are separate capabilities for setting these
features:
· To change the current foreground or background color on a
Tektronix-type terminal, use setaf (set ANSI foreground) and
setab (set ANSI background) or setf (set foreground) and setb
(set background). These take one parameter, the color number.
The SVr4 documentation describes only setaf/setab; the XPG4 draft
says that "If the terminal supports ANSI escape sequences to set
background and foreground, they should be coded as setaf and
setab, respectively.
· If the terminal supports other escape sequences to set background
and foreground, they should be coded as setf and setb,
respectively. The vidputs and the refresh(3X) functions use the
setaf and setab capabilities if they are defined.
The setaf/setab and setf/setb capabilities take a single numeric
argument each. Argument values 0-7 of setaf/setab are portably
defined as follows (the middle column is the symbolic #define
available in the header for the curses or ncurses libraries). The
terminal hardware is free to map these as it likes, but the RGB
values indicate normal locations in color space.
Color #define Value RGB
black COLOR_BLACK 0 0, 0, 0
red COLOR_RED 1 max,0,0
green COLOR_GREEN 2 0,max,0
yellow COLOR_YELLOW 3 max,max,0
blue COLOR_BLUE 4 0,0,max
magenta COLOR_MAGENTA 5 max,0,max
cyan COLOR_CYAN 6 0,max,max
white COLOR_WHITE 7 max,max,max
The argument values of setf/setb historically correspond to a
different mapping, i.e.,
Color #define Value RGB
black COLOR_BLACK 0 0, 0, 0
blue COLOR_BLUE 1 0,0,max
green COLOR_GREEN 2 0,max,0
cyan COLOR_CYAN 3 0,max,max
red COLOR_RED 4 max,0,0
magenta COLOR_MAGENTA 5 max,0,max
yellow COLOR_YELLOW 6 max,max,0
white COLOR_WHITE 7 max,max,max
It is important to not confuse the two sets of color capabilities;
otherwise red/blue will be interchanged on the display.
On an HP-like terminal, use scp with a color-pair number parameter to
set which color pair is current.
Some terminals allow the color values to be modified:
· On a Tektronix-like terminal, the capability ccc may be present
to indicate that colors can be modified. If so, the initc
capability will take a color number (0 to colors - 1)and three
more parameters which describe the color. These three parameters
default to being interpreted as RGB (Red, Green, Blue) values.
If the boolean capability hls is present, they are instead as HLS
(Hue, Lightness, Saturation) indices. The ranges are terminal-
dependent.
· On an HP-like terminal, initp may give a capability for changing
a color-pair value. It will take seven parameters; a color-pair
number (0 to max_pairs - 1), and two triples describing first
background and then foreground colors. These parameters must be
(Red, Green, Blue) or (Hue, Lightness, Saturation) depending on
hls.
On some color terminals, colors collide with highlights. You can
register these collisions with the ncv capability. This is a bit-
mask of attributes not to be used when colors are enabled. The
correspondence with the attributes understood by curses is as
follows:
Attribute Bit Decimal Set by
A_STANDOUT 0 1 sgr
A_UNDERLINE 1 2 sgr
A_REVERSE 2 4 sgr
A_BLINK 3 8 sgr
A_DIM 4 16 sgr
A_BOLD 5 32 sgr
A_INVIS 6 64 sgr
A_PROTECT 7 128 sgr
A_ALTCHARSET 8 256 sgr
A_HORIZONTAL 9 512 sgr1
A_LEFT 10 1024 sgr1
A_LOW 11 2048 sgr1
A_RIGHT 12 4096 sgr1
A_TOP 13 8192 sgr1
A_VERTICAL 14 16384 sgr1
A_ITALIC 15 32768 sitm
For example, on many IBM PC consoles, the underline attribute
collides with the foreground color blue and is not available in color
mode. These should have an ncv capability of 2.
SVr4 curses does nothing with ncv, ncurses recognizes it and
optimizes the output in favor of colors.
Miscellaneous
If the terminal requires other than a null (zero) character as a pad,
then this can be given as pad. Only the first character of the pad
string is used. If the terminal does not have a pad character,
specify npc. Note that ncurses implements the termcap-compatible PC
variable; though the application may set this value to something
other than a null, ncurses will test npc first and use napms if the
terminal has no pad character.
If the terminal can move up or down half a line, this can be
indicated with hu (half-line up) and hd (half-line down). This is
primarily useful for superscripts and subscripts on hard-copy
terminals. If a hard-copy terminal can eject to the next page (form
feed), give this as ff (usually control L).
If there is a command to repeat a given character a given number of
times (to save time transmitting a large number of identical
characters) this can be indicated with the parameterized string rep.
The first parameter is the character to be repeated and the second is
the number of times to repeat it. Thus, tparm(repeat_char, 'x', 10)
is the same as “xxxxxxxxxx”.
If the terminal has a settable command character, such as the
TEKTRONIX 4025, this can be indicated with cmdch. A prototype
command character is chosen which is used in all capabilities. This
character is given in the cmdch capability to identify it. The
following convention is supported on some UNIX systems: The
environment is to be searched for a CC variable, and if found, all
occurrences of the prototype character are replaced with the
character in the environment variable.
Terminal descriptions that do not represent a specific kind of known
terminal, such as switch, dialup, patch, and network, should include
the gn (generic) capability so that programs can complain that they
do not know how to talk to the terminal. (This capability does not
apply to virtual terminal descriptions for which the escape sequences
are known.)
If the terminal has a “meta key” which acts as a shift key, setting
the 8th bit of any character transmitted, this fact can be indicated
with km. Otherwise, software will assume that the 8th bit is parity
and it will usually be cleared. If strings exist to turn this “meta
mode” on and off, they can be given as smm and rmm.
If the terminal has more lines of memory than will fit on the screen
at once, the number of lines of memory can be indicated with lm. A
value of lm#0 indicates that the number of lines is not fixed, but
that there is still more memory than fits on the screen.
If the terminal is one of those supported by the UNIX virtual
terminal protocol, the terminal number can be given as vt.
Media copy strings which control an auxiliary printer connected to
the terminal can be given as mc0: print the contents of the screen,
mc4: turn off the printer, and mc5: turn on the printer. When the
printer is on, all text sent to the terminal will be sent to the
printer. It is undefined whether the text is also displayed on the
terminal screen when the printer is on. A variation mc5p takes one
parameter, and leaves the printer on for as many characters as the
value of the parameter, then turns the printer off. The parameter
should not exceed 255. All text, including mc4, is transparently
passed to the printer while an mc5p is in effect.
Glitches and Braindamage
Hazeltine terminals, which do not allow “~” characters to be
displayed should indicate hz.
Terminals which ignore a line-feed immediately after an am wrap, such
as the Concept and vt100, should indicate xenl.
If el is required to get rid of standout (instead of merely writing
normal text on top of it), xhp should be given.
Teleray terminals, where tabs turn all characters moved over to
blanks, should indicate xt (destructive tabs). Note: the variable
indicating this is now “dest_tabs_magic_smso”; in older versions, it
was teleray_glitch. This glitch is also taken to mean that it is not
possible to position the cursor on top of a “magic cookie”, that to
erase standout mode it is instead necessary to use delete and insert
line. The ncurses implementation ignores this glitch.
The Beehive Superbee, which is unable to correctly transmit the
escape or control C characters, has xsb, indicating that the f1 key
is used for escape and f2 for control C. (Only certain Superbees
have this problem, depending on the ROM.) Note that in older
terminfo versions, this capability was called “beehive_glitch”; it is
now “no_esc_ctl_c”.
Other specific terminal problems may be corrected by adding more
capabilities of the form xx.
Pitfalls of Long Entries
Long terminfo entries are unlikely to be a problem; to date, no entry
has even approached terminfo's 4096-byte string-table maximum.
Unfortunately, the termcap translations are much more strictly
limited (to 1023 bytes), thus termcap translations of long terminfo
entries can cause problems.
The man pages for 4.3BSD and older versions of tgetent instruct the
user to allocate a 1024-byte buffer for the termcap entry. The entry
gets null-terminated by the termcap library, so that makes the
maximum safe length for a termcap entry 1k-1 (1023) bytes. Depending
on what the application and the termcap library being used does, and
where in the termcap file the terminal type that tgetent is searching
for is, several bad things can happen.
Some termcap libraries print a warning message or exit if they find
an entry that's longer than 1023 bytes; others do not; others
truncate the entries to 1023 bytes. Some application programs
allocate more than the recommended 1K for the termcap entry; others
do not.
Each termcap entry has two important sizes associated with it: before
"tc" expansion, and after "tc" expansion. "tc" is the capability
that tacks on another termcap entry to the end of the current one, to
add on its capabilities. If a termcap entry does not use the "tc"
capability, then of course the two lengths are the same.
The "before tc expansion" length is the most important one, because
it affects more than just users of that particular terminal. This is
the length of the entry as it exists in /etc/termcap, minus the
backslash-newline pairs, which tgetent strips out while reading it.
Some termcap libraries strip off the final newline, too (GNU termcap
does not). Now suppose:
· a termcap entry before expansion is more than 1023 bytes long,
· and the application has only allocated a 1k buffer,
· and the termcap library (like the one in BSD/OS 1.1 and GNU)
reads the whole entry into the buffer, no matter what its length,
to see if it is the entry it wants,
· and tgetent is searching for a terminal type that either is the
long entry, appears in the termcap file after the long entry, or
does not appear in the file at all (so that tgetent has to search
the whole termcap file).
Then tgetent will overwrite memory, perhaps its stack, and probably
core dump the program. Programs like telnet are particularly
vulnerable; modern telnets pass along values like the terminal type
automatically. The results are almost as undesirable with a termcap
library, like SunOS 4.1.3 and Ultrix 4.4, that prints warning
messages when it reads an overly long termcap entry. If a termcap
library truncates long entries, like OSF/1 3.0, it is immune to dying
here but will return incorrect data for the terminal.
The "after tc expansion" length will have a similar effect to the
above, but only for people who actually set TERM to that terminal
type, since tgetent only does "tc" expansion once it is found the
terminal type it was looking for, not while searching.
In summary, a termcap entry that is longer than 1023 bytes can cause,
on various combinations of termcap libraries and applications, a core
dump, warnings, or incorrect operation. If it is too long even
before "tc" expansion, it will have this effect even for users of
some other terminal types and users whose TERM variable does not have
a termcap entry.
When in -C (translate to termcap) mode, the ncurses implementation of
@TIC@(1M) issues warning messages when the pre-tc length of a termcap
translation is too long. The -c (check) option also checks resolved
(after tc expansion) lengths.
Binary Compatibility
It is not wise to count on portability of binary terminfo entries
between commercial UNIX versions. The problem is that there are at
least two versions of terminfo (under HP-UX and AIX) which diverged
from System V terminfo after SVr1, and have added extension
capabilities to the string table that (in the binary format) collide
with System V and XSI Curses extensions.
Searching for terminal descriptions in $HOME/.terminfo and
TERMINFO_DIRS is not supported by older implementations.
Some SVr4 curses implementations, and all previous to SVr4, do not
interpret the %A and %O operators in parameter strings.
SVr4/XPG4 do not specify whether msgr licenses movement while in an
alternate-character-set mode (such modes may, among other things, map
CR and NL to characters that do not trigger local motions). The
ncurses implementation ignores msgr in ALTCHARSET mode. This raises
the possibility that an XPG4 implementation making the opposite
interpretation may need terminfo entries made for ncurses to have
msgr turned off.
The ncurses library handles insert-character and insert-character
modes in a slightly non-standard way to get better update efficiency.
See the Insert/Delete Character subsection above.
The parameter substitutions for set_clock and display_clock are not
documented in SVr4 or the XSI Curses standard. They are deduced from
the documentation for the AT&T 505 terminal.
Be careful assigning the kmous capability. The ncurses library wants
to interpret it as KEY_MOUSE, for use by terminals and emulators like
xterm that can return mouse-tracking information in the keyboard-
input stream.
X/Open Curses does not mention italics. Portable applications must
assume that numeric capabilities are signed 16-bit values. This
includes the no_color_video (ncv) capability. The 32768 mask value
used for italics with ncv can be confused with an absent or cancelled
ncv. If italics should work with colors, then the ncv value must be
specified, even if it is zero.
Different commercial ports of terminfo and curses support different
subsets of the XSI Curses standard and (in some cases) different
extension sets. Here is a summary, accurate as of October 1995:
· SVR4, Solaris, ncurses -- These support all SVr4 capabilities.
· SGI -- Supports the SVr4 set, adds one undocumented extended
string capability (set_pglen).
· SVr1, Ultrix -- These support a restricted subset of terminfo
capabilities. The booleans end with xon_xoff; the numerics with
width_status_line; and the strings with prtr_non.
· HP/UX -- Supports the SVr1 subset, plus the SVr[234] numerics
num_labels, label_height, label_width, plus function keys 11
through 63, plus plab_norm, label_on, and label_off, plus some
incompatible extensions in the string table.
· AIX -- Supports the SVr1 subset, plus function keys 11 through
63, plus a number of incompatible string table extensions.
· OSF -- Supports both the SVr4 set and the AIX extensions.
@TERMINFO@/?/* files containing terminal descriptions
@TIC@(1M), @INFOCMP@(1M), curses(3X), curs_color(3X), printf(3),
term(5). term_variables(3X).
Zeyd M. Ben-Halim, Eric S. Raymond, Thomas E. Dickey. Based on
pcurses by Pavel Curtis.
This page is part of the ncurses (new curses) project. Information
about the project can be found at
⟨https://www.gnu.org/software/ncurses/ncurses.html⟩. If you have a
bug report for this manual page, send it to
bug-ncurses-request@gnu.org. This page was obtained from the
project's upstream Git mirror of the CVS repository
⟨git://ncurses.scripts.mit.edu/ncurses.git⟩ on 2017-07-05. If you
discover any rendering problems in this HTML version of the page, or
you believe there is a better or more up-to-date source for the page,
or you have corrections or improvements to the information in this
COLOPHON (which is not part of the original manual page), send a mail
to man-pages@man7.org
terminfo(5)
Pages that refer to this page: clear(1), pg(1), setterm(1), tabs(1), tput(1), tset(1), ul(1), curs_color(3x), curs_termcap(3x), curs_terminfo(3x), curs_variables(3x), ncurses(3x), term_variables(3x), console_codes(4), term(5), termcap(5), ttytype(5), term(7)