|
NAME | SYNOPSIS | DESCRIPTION | RETURN VALUE | ERRORS | ATTRIBUTES | CONFORMING TO | NOTES | SEE ALSO | COLOPHON |
READDIR(3) Linux Programmer's Manual READDIR(3)
readdir - read a directory
#include <dirent.h>
struct dirent *readdir(DIR *dirp);
The readdir() function returns a pointer to a dirent structure
representing the next directory entry in the directory stream pointed
to by dirp. It returns NULL on reaching the end of the directory
stream or if an error occurred.
In the glibc implementation, the dirent structure is defined as
follows:
struct dirent {
ino_t d_ino; /* Inode number */
off_t d_off; /* Not an offset; see below */
unsigned short d_reclen; /* Length of this record */
unsigned char d_type; /* Type of file; not supported
by all filesystem types */
char d_name[256]; /* Null-terminated filename */
};
The only fields in the dirent structure that are mandated by POSIX.1
are d_name and d_ino. The other fields are unstandardized, and not
present on all systems; see NOTES below for some further details.
The fields of the dirent structure are as follows:
d_ino This is the inode number of the file.
d_off The value returned in d_off is the same as would be returned
by calling telldir(3) at the current position in the directory
stream. Be aware that despite its type and name, the d_off
field is seldom any kind of directory offset on modern
filesystems. Applications should treat this field as an
opaque value, making no assumptions about its contents; see
also telldir(3).
d_reclen
This is the size (in bytes) of the returned record. This may
not match the size of the structure definition shown above;
see NOTES.
d_type This field contains a value indicating the file type, making
it possible to avoid the expense of calling lstat(2) if
further actions depend on the type of the file.
When a suitable feature test macro is defined (_DEFAULT_SOURCE
on glibc versions since 2.19, or _BSD_SOURCE on glibc versions
2.19 and earlier), glibc defines the following macro constants
for the value returned in d_type:
DT_BLK This is a block device.
DT_CHR This is a character device.
DT_DIR This is a directory.
DT_FIFO This is a named pipe (FIFO).
DT_LNK This is a symbolic link.
DT_REG This is a regular file.
DT_SOCK This is a UNIX domain socket.
DT_UNKNOWN The file type could not be determined.
Currently, only some filesystems (among them: Btrfs, ext2,
ext3, and ext4) have full support for returning the file type
in d_type. All applications must properly handle a return of
DT_UNKNOWN.
d_name This field contains the null terminated filename. See NOTES.
The data returned by readdir() may be overwritten by subsequent calls
to readdir() for the same directory stream.
On success, readdir() returns a pointer to a dirent structure. (This
structure may be statically allocated; do not attempt to free(3) it.)
If the end of the directory stream is reached, NULL is returned and
errno is not changed. If an error occurs, NULL is returned and errno
is set appropriately. To distinguish end of stream and from an
error, set errno to zero before calling readdir() and then check the
value of errno if NULL is returned.
EBADF Invalid directory stream descriptor dirp.
For an explanation of the terms used in this section, see
attributes(7).
┌──────────┬───────────────┬──────────────────────────┐
│Interface │ Attribute │ Value │
├──────────┼───────────────┼──────────────────────────┤
│readdir() │ Thread safety │ MT-Unsafe race:dirstream │
└──────────┴───────────────┴──────────────────────────┘
In the current POSIX.1 specification (POSIX.1-2008), readdir() is not
required to be thread-safe. However, in modern implementations
(including the glibc implementation), concurrent calls to readdir()
that specify different directory streams are thread-safe. In cases
where multiple threads must read from the same directory stream,
using readdir() with external synchronization is still preferable to
the use of the deprecated readdir_r(3) function. It is expected that
a future version of POSIX.1 will require that readdir() be thread-
safe when concurrently employed on different directory streams.
POSIX.1-2001, POSIX.1-2008, SVr4, 4.3BSD.
A directory stream is opened using opendir(3).
The order in which filenames are read by successive calls to
readdir() depends on the filesystem implementation; it is unlikely
that the names will be sorted in any fashion.
Only the fields d_name and (as an XSI extension) d_ino are specified
in POSIX.1. Other than Linux, the d_type field is available mainly
only on BSD systems. The remaining fields are available on many, but
not all systems. Under glibc, programs can check for the
availability of the fields not defined in POSIX.1 by testing whether
the macros _DIRENT_HAVE_D_NAMLEN, _DIRENT_HAVE_D_RECLEN,
_DIRENT_HAVE_D_OFF, or _DIRENT_HAVE_D_TYPE are defined.
The d_name field
The dirent structure definition shown above is taken from the glibc
headers, and shows the d_name field with a fixed size.
Warning: applications should avoid any dependence on the size of the
d_name field. POSIX defines it as char d_name[], a character array
of unspecified size, with at most NAME_MAX characters preceding the
terminating null byte ('\0').
POSIX.1 explicitly notes that this field should not be used as an
lvalue. The standard also notes that the use of sizeof(d_name) is
incorrect; use strlen(d_name) instead. (On some systems, this field
is defined as char d_name[1]!) By implication, the use sizeof(struct
dirent) to capture the size of the record including the size of
d_name is also incorrect.
Note that while the call
fpathconf(fd, _PC_NAME_MAX)
returns the value 255 for most filesystems, on some filesystems
(e.g., CIFS, Windows SMB servers), the null-terminated filename that
is (correctly) returned in d_name can actually exceed this size. In
such cases, the d_reclen field will contain a value that exceeds the
size of the glibc dirent structure shown above.
getdents(2), read(2), closedir(3), dirfd(3), ftw(3), offsetof(3),
opendir(3), readdir_r(3), rewinddir(3), scandir(3), seekdir(3),
telldir(3)
This page is part of release 4.12 of the Linux man-pages project. A
description of the project, information about reporting bugs, and the
latest version of this page, can be found at
https://www.kernel.org/doc/man-pages/.
2016-03-15 READDIR(3)
Pages that refer to this page: fanotify_mark(2), getdents(2), readdir(2), closedir(3), dirfd(3), fts(3), ftw(3), getdirentries(3), glob(3), opendir(3), readdir_r(3), rewinddir(3), scandir(3), seekdir(3), telldir(3), mkfs.xfs(8), xfs_io(8)