Cipher (Java Platform SE 7 )

java.lang.Object
- javax.crypto.Cipher

Direct Known Subclasses:

NullCipher
```
public class Cipher
extends Object
```
This class provides the functionality of a cryptographic cipher for encryption and decryption. It forms the core of the Java Cryptographic Extension (JCE) framework.
In order to create a Cipher object, the application calls the Cipher's getInstance method, and passes the name of the requested transformation to it. Optionally, the name of a provider may be specified.
A transformation is a string that describes the operation (or set of operations) to be performed on the given input, to produce some output. A transformation always includes the name of a cryptographic algorithm (e.g., DES), and may be followed by a feedback mode and padding scheme.
A transformation is of the form:
- "algorithm/mode/padding" or
- "algorithm"
(in the latter case, provider-specific default values for the mode and padding scheme are used). For example, the following is a valid transformation:
```
     Cipher c = Cipher.getInstance("DES/CBC/PKCS5Padding");
 
```
Using modes such as CFB and OFB, block ciphers can encrypt data in units smaller than the cipher's actual block size. When requesting such a mode, you may optionally specify the number of bits to be processed at a time by appending this number to the mode name as shown in the "DES/CFB8/NoPadding" and "DES/OFB32/PKCS5Padding" transformations. If no such number is specified, a provider-specific default is used. (For example, the SunJCE provider uses a default of 64 bits for DES.) Thus, block ciphers can be turned into byte-oriented stream ciphers by using an 8 bit mode such as CFB8 or OFB8.
Modes such as Authenticated Encryption with Associated Data (AEAD) provide authenticity assurances for both confidential data and Additional Associated Data (AAD) that is not encrypted. (Please see RFC 5116 for more information on AEAD and AEAD algorithms such as GCM/CCM.) Both confidential and AAD data can be used when calculating the authentication tag (similar to a Mac). This tag is appended to the ciphertext during encryption, and is verified on decryption.
AEAD modes such as GCM/CCM perform all AAD authenticity calculations before starting the ciphertext authenticity calculations. To avoid implementations having to internally buffer ciphertext, all AAD data must be supplied to GCM/CCM implementations (via the updateAAD methods) before the ciphertext is processed (via the update and doFinal methods).
```
     GCMParameterSpec s = new GCMParameterSpec(...);
     cipher.init(..., s);

     // If the GCMParameterSpec is needed again
     cipher.getParameters().getParameterSpec(GCMParameterSpec.class));

     cipher.updateAAD(...);  // AAD
     cipher.update(...);     // Multi-part update
     cipher.doFinal(...);    // conclusion of operation
 
```
Every implementation of the Java platform is required to support the following standard Cipher transformations with the keysizes in parentheses:
- AES/CBC/NoPadding (128)
- AES/CBC/PKCS5Padding (128)
- AES/ECB/NoPadding (128)
- AES/ECB/PKCS5Padding (128)
- DES/CBC/NoPadding (56)
- DES/CBC/PKCS5Padding (56)
- DES/ECB/NoPadding (56)
- DES/ECB/PKCS5Padding (56)
- DESede/CBC/NoPadding (168)
- DESede/CBC/PKCS5Padding (168)
- DESede/ECB/NoPadding (168)
- DESede/ECB/PKCS5Padding (168)
- RSA/ECB/PKCS1Padding (1024, 2048)
- RSA/ECB/OAEPWithSHA-1AndMGF1Padding (1024, 2048)
- RSA/ECB/OAEPWithSHA-256AndMGF1Padding (1024, 2048)
These transformations are described in the Cipher section of the Java Cryptography Architecture Standard Algorithm Name Documentation. Consult the release documentation for your implementation to see if any other transformations are supported.
Since:

1.4

See Also:
KeyGenerator, SecretKey

Field Summary

Fields
Modifier and Type	Field and Description
`static int`	`DECRYPT_MODE` Constant used to initialize cipher to decryption mode.
`static int`	`ENCRYPT_MODE` Constant used to initialize cipher to encryption mode.
`static int`	`PRIVATE_KEY` Constant used to indicate the to-be-unwrapped key is a "private key".
`static int`	`PUBLIC_KEY` Constant used to indicate the to-be-unwrapped key is a "public key".
`static int`	`SECRET_KEY` Constant used to indicate the to-be-unwrapped key is a "secret key".
`static int`	`UNWRAP_MODE` Constant used to initialize cipher to key-unwrapping mode.
`static int`	`WRAP_MODE` Constant used to initialize cipher to key-wrapping mode.

Constructor Summary

Constructors
Modifier Constructor and Description

protected Cipher(CipherSpi cipherSpi, Provider provider, String transformation)
Creates a Cipher object.

Constructors
Modifier	Constructor and Description
`protected`	`Cipher(CipherSpi cipherSpi, Provider provider, String transformation)` Creates a Cipher object.

Method Summary

Methods
Modifier and Type	Method and Description
`byte[]`	`doFinal()` Finishes a multiple-part encryption or decryption operation, depending on how this cipher was initialized.
`byte[]`	`doFinal(byte[] input)` Encrypts or decrypts data in a single-part operation, or finishes a multiple-part operation.
`int`	`doFinal(byte[] output, int outputOffset)` Finishes a multiple-part encryption or decryption operation, depending on how this cipher was initialized.
`byte[]`	`doFinal(byte[] input, int inputOffset, int inputLen)` Encrypts or decrypts data in a single-part operation, or finishes a multiple-part operation.
`int`	`doFinal(byte[] input, int inputOffset, int inputLen, byte[] output)` Encrypts or decrypts data in a single-part operation, or finishes a multiple-part operation.
`int`	`doFinal(byte[] input, int inputOffset, int inputLen, byte[] output, int outputOffset)` Encrypts or decrypts data in a single-part operation, or finishes a multiple-part operation.
`int`	`doFinal(ByteBuffer input, ByteBuffer output)` Encrypts or decrypts data in a single-part operation, or finishes a multiple-part operation.
`String`	`getAlgorithm()` Returns the algorithm name of this `Cipher` object.
`int`	`getBlockSize()` Returns the block size (in bytes).
`ExemptionMechanism`	`getExemptionMechanism()` Returns the exemption mechanism object used with this cipher.
`static Cipher`	`getInstance(String transformation)` Returns a `Cipher` object that implements the specified transformation.
`static Cipher`	`getInstance(String transformation, Provider provider)` Returns a `Cipher` object that implements the specified transformation.
`static Cipher`	`getInstance(String transformation, String provider)` Returns a `Cipher` object that implements the specified transformation.
`byte[]`	`getIV()` Returns the initialization vector (IV) in a new buffer.
`static int`	`getMaxAllowedKeyLength(String transformation)` Returns the maximum key length for the specified transformation according to the installed JCE jurisdiction policy files.
`static AlgorithmParameterSpec`	`getMaxAllowedParameterSpec(String transformation)` Returns an AlgorithmParameterSpec object which contains the maximum cipher parameter value according to the jurisdiction policy file.
`int`	`getOutputSize(int inputLen)` Returns the length in bytes that an output buffer would need to be in order to hold the result of the next `update` or `doFinal` operation, given the input length `inputLen` (in bytes).
`AlgorithmParameters`	`getParameters()` Returns the parameters used with this cipher.
`Provider`	`getProvider()` Returns the provider of this `Cipher` object.
`void`	`init(int opmode, Certificate certificate)` Initializes this cipher with the public key from the given certificate.
`void`	`init(int opmode, Certificate certificate, SecureRandom random)` Initializes this cipher with the public key from the given certificate and a source of randomness.
`void`	`init(int opmode, Key key)` Initializes this cipher with a key.
`void`	`init(int opmode, Key key, AlgorithmParameters params)` Initializes this cipher with a key and a set of algorithm parameters.
`void`	`init(int opmode, Key key, AlgorithmParameterSpec params)` Initializes this cipher with a key and a set of algorithm parameters.
`void`	`init(int opmode, Key key, AlgorithmParameterSpec params, SecureRandom random)` Initializes this cipher with a key, a set of algorithm parameters, and a source of randomness.
`void`	`init(int opmode, Key key, AlgorithmParameters params, SecureRandom random)` Initializes this cipher with a key, a set of algorithm parameters, and a source of randomness.
`void`	`init(int opmode, Key key, SecureRandom random)` Initializes this cipher with a key and a source of randomness.
`Key`	`unwrap(byte[] wrappedKey, String wrappedKeyAlgorithm, int wrappedKeyType)` Unwrap a previously wrapped key.
`byte[]`	`update(byte[] input)` Continues a multiple-part encryption or decryption operation (depending on how this cipher was initialized), processing another data part.
`byte[]`	`update(byte[] input, int inputOffset, int inputLen)` Continues a multiple-part encryption or decryption operation (depending on how this cipher was initialized), processing another data part.
`int`	`update(byte[] input, int inputOffset, int inputLen, byte[] output)` Continues a multiple-part encryption or decryption operation (depending on how this cipher was initialized), processing another data part.
`int`	`update(byte[] input, int inputOffset, int inputLen, byte[] output, int outputOffset)` Continues a multiple-part encryption or decryption operation (depending on how this cipher was initialized), processing another data part.
`int`	`update(ByteBuffer input, ByteBuffer output)` Continues a multiple-part encryption or decryption operation (depending on how this cipher was initialized), processing another data part.
`void`	`updateAAD(byte[] src)` Continues a multi-part update of the Additional Authentication Data (AAD).
`void`	`updateAAD(byte[] src, int offset, int len)` Continues a multi-part update of the Additional Authentication Data (AAD), using a subset of the provided buffer.
`void`	`updateAAD(ByteBuffer src)` Continues a multi-part update of the Additional Authentication Data (AAD).
`byte[]`	`wrap(Key key)` Wrap a key.

Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

- Field Detail
  - ENCRYPT_MODE
```
public static final int ENCRYPT_MODE
```
    Constant used to initialize cipher to encryption mode.
    
    See Also:
    Constant Field Values
  - DECRYPT_MODE
```
public static final int DECRYPT_MODE
```
    Constant used to initialize cipher to decryption mode.
    
    See Also:
    Constant Field Values
  - WRAP_MODE
```
public static final int WRAP_MODE
```
    Constant used to initialize cipher to key-wrapping mode.
    
    See Also:
    Constant Field Values
  - UNWRAP_MODE
```
public static final int UNWRAP_MODE
```
    Constant used to initialize cipher to key-unwrapping mode.
    
    See Also:
    Constant Field Values
  - PUBLIC_KEY
```
public static final int PUBLIC_KEY
```
    Constant used to indicate the to-be-unwrapped key is a "public key".
    
    See Also:
    Constant Field Values
  - PRIVATE_KEY
```
public static final int PRIVATE_KEY
```
    Constant used to indicate the to-be-unwrapped key is a "private key".
    
    See Also:
    Constant Field Values
  - SECRET_KEY
```
public static final int SECRET_KEY
```
    Constant used to indicate the to-be-unwrapped key is a "secret key".
    
    See Also:
    Constant Field Values
- Constructor Detail
  - Cipher
```
protected Cipher(CipherSpi cipherSpi,
      Provider provider,
      String transformation)
```
    Creates a Cipher object.
    
    Parameters:
    cipherSpi - the delegate
    provider - the provider
    transformation - the transformation
- Method Detail
  - getInstance
```
public static final Cipher getInstance(String transformation)
                                throws NoSuchAlgorithmException,
                                       NoSuchPaddingException
```
    Returns a Cipher object that implements the specified transformation.
    This method traverses the list of registered security Providers, starting with the most preferred Provider. A new Cipher object encapsulating the CipherSpi implementation from the first Provider that supports the specified algorithm is returned.
    Note that the list of registered providers may be retrieved via the Security.getProviders() method.
    
    Parameters:
    transformation - the name of the transformation, e.g., DES/CBC/PKCS5Padding. See the Cipher section in the Java Cryptography Architecture Standard Algorithm Name Documentation for information about standard transformation names.
    
    Returns:
    a cipher that implements the requested transformation.
    
    Throws:
    
    NoSuchAlgorithmException - if transformation is null, empty, in an invalid format, or if no Provider supports a CipherSpi implementation for the specified algorithm.
    
    NoSuchPaddingException - if transformation contains a padding scheme that is not available.
    See Also:
    Provider
  - getInstance
```
public static final Cipher getInstance(String transformation,
                 String provider)
                                throws NoSuchAlgorithmException,
                                       NoSuchProviderException,
                                       NoSuchPaddingException
```
    Returns a Cipher object that implements the specified transformation.
    A new Cipher object encapsulating the CipherSpi implementation from the specified provider is returned. The specified provider must be registered in the security provider list.
    Note that the list of registered providers may be retrieved via the Security.getProviders() method.
    
    Parameters:
    transformation - the name of the transformation, e.g., DES/CBC/PKCS5Padding. See the Cipher section in the Java Cryptography Architecture Standard Algorithm Name Documentation for information about standard transformation names.
    provider - the name of the provider.
    
    Returns:
    a cipher that implements the requested transformation.
    
    Throws:
    
    NoSuchAlgorithmException - if transformation is null, empty, in an invalid format, or if a CipherSpi implementation for the specified algorithm is not available from the specified provider.
    
    NoSuchProviderException - if the specified provider is not registered in the security provider list.
    
    NoSuchPaddingException - if transformation contains a padding scheme that is not available.
    
    IllegalArgumentException - if the provider is null or empty.
    See Also:
    Provider
  - getInstance
```
public static final Cipher getInstance(String transformation,
                 Provider provider)
                                throws NoSuchAlgorithmException,
                                       NoSuchPaddingException
```
    Returns a Cipher object that implements the specified transformation.
    A new Cipher object encapsulating the CipherSpi implementation from the specified Provider object is returned. Note that the specified Provider object does not have to be registered in the provider list.
    
    Parameters:
    transformation - the name of the transformation, e.g., DES/CBC/PKCS5Padding. See the Cipher section in the Java Cryptography Architecture Standard Algorithm Name Documentation for information about standard transformation names.
    provider - the provider.
    
    Returns:
    a cipher that implements the requested transformation.
    
    Throws:
    
    NoSuchAlgorithmException - if transformation is null, empty, in an invalid format, or if a CipherSpi implementation for the specified algorithm is not available from the specified Provider object.
    
    NoSuchPaddingException - if transformation contains a padding scheme that is not available.
    
    IllegalArgumentException - if the provider is null.
    See Also:
    Provider
  - getProvider
```
public final Provider getProvider()
```
    Returns the provider of this Cipher object.
    
    Returns:
    the provider of this Cipher object
  - getAlgorithm
```
public final String getAlgorithm()
```
    Returns the algorithm name of this Cipher object.
    This is the same name that was specified in one of the getInstance calls that created this Cipher object..
    
    Returns:
    the algorithm name of this Cipher object.
  - getBlockSize
```
public final int getBlockSize()
```
    Returns the block size (in bytes).
    
    Returns:
    the block size (in bytes), or 0 if the underlying algorithm is not a block cipher
  - getOutputSize
```
public final int getOutputSize(int inputLen)
```
    Returns the length in bytes that an output buffer would need to be in order to hold the result of the next update or doFinal operation, given the input length inputLen (in bytes).
    This call takes into account any unprocessed (buffered) data from a previous update call, padding, and AEAD tagging.
    The actual output length of the next update or doFinal call may be smaller than the length returned by this method.
    
    Parameters:
    inputLen - the input length (in bytes)
    
    Returns:
    the required output buffer size (in bytes)
    
    Throws:
    
    IllegalStateException - if this cipher is in a wrong state (e.g., has not yet been initialized)
  - getIV
```
public final byte[] getIV()
```
    Returns the initialization vector (IV) in a new buffer.
    This is useful in the case where a random IV was created, or in the context of password-based encryption or decryption, where the IV is derived from a user-supplied password.
    
    Returns:
    the initialization vector in a new buffer, or null if the underlying algorithm does not use an IV, or if the IV has not yet been set.
  - getParameters
```
public final AlgorithmParameters getParameters()
```
    Returns the parameters used with this cipher.
    The returned parameters may be the same that were used to initialize this cipher, or may contain a combination of default and random parameter values used by the underlying cipher implementation if this cipher requires algorithm parameters but was not initialized with any.
    
    Returns:
    the parameters used with this cipher, or null if this cipher does not use any parameters.
  - getExemptionMechanism
```
public final ExemptionMechanism getExemptionMechanism()
```
    Returns the exemption mechanism object used with this cipher.
    
    Returns:
    the exemption mechanism object used with this cipher, or null if this cipher does not use any exemption mechanism.
  - init
```
public final void init(int opmode,
        Key key)
                throws InvalidKeyException
```
    Initializes this cipher with a key.
    The cipher is initialized for one of the following four operations: encryption, decryption, key wrapping or key unwrapping, depending on the value of opmode.
    If this cipher requires any algorithm parameters that cannot be derived from the given key, the underlying cipher implementation is supposed to generate the required parameters itself (using provider-specific default or random values) if it is being initialized for encryption or key wrapping, and raise an InvalidKeyException if it is being initialized for decryption or key unwrapping. The generated parameters can be retrieved using getParameters or getIV (if the parameter is an IV).
    If this cipher requires algorithm parameters that cannot be derived from the input parameters, and there are no reasonable provider-specific default values, initialization will necessarily fail.
    If this cipher (including its underlying feedback or padding scheme) requires any random bytes (e.g., for parameter generation), it will get them using the SecureRandom implementation of the highest-priority installed provider as the source of randomness. (If none of the installed providers supply an implementation of SecureRandom, a system-provided source of randomness will be used.)
    Note that when a Cipher object is initialized, it loses all previously-acquired state. In other words, initializing a Cipher is equivalent to creating a new instance of that Cipher and initializing it.
    
    Parameters:
    opmode - the operation mode of this cipher (this is one of the following: ENCRYPT_MODE, DECRYPT_MODE, WRAP_MODE or UNWRAP_MODE)
    key - the key
    
    Throws:
    
    InvalidKeyException - if the given key is inappropriate for initializing this cipher, or requires algorithm parameters that cannot be determined from the given key, or if the given key has a keysize that exceeds the maximum allowable keysize (as determined from the configured jurisdiction policy files).
  - init
```
public final void init(int opmode,
        Key key,
        SecureRandom random)
                throws InvalidKeyException
```
    Initializes this cipher with a key and a source of randomness.
    The cipher is initialized for one of the following four operations: encryption, decryption, key wrapping or key unwrapping, depending on the value of opmode.
    If this cipher requires any algorithm parameters that cannot be derived from the given key, the underlying cipher implementation is supposed to generate the required parameters itself (using provider-specific default or random values) if it is being initialized for encryption or key wrapping, and raise an InvalidKeyException if it is being initialized for decryption or key unwrapping. The generated parameters can be retrieved using getParameters or getIV (if the parameter is an IV).
    If this cipher requires algorithm parameters that cannot be derived from the input parameters, and there are no reasonable provider-specific default values, initialization will necessarily fail.
    If this cipher (including its underlying feedback or padding scheme) requires any random bytes (e.g., for parameter generation), it will get them from random.
    Note that when a Cipher object is initialized, it loses all previously-acquired state. In other words, initializing a Cipher is equivalent to creating a new instance of that Cipher and initializing it.
    
    Parameters:
    opmode - the operation mode of this cipher (this is one of the following: ENCRYPT_MODE, DECRYPT_MODE, WRAP_MODE or UNWRAP_MODE)
    key - the encryption key
    random - the source of randomness
    
    Throws:
    
    InvalidKeyException - if the given key is inappropriate for initializing this cipher, or requires algorithm parameters that cannot be determined from the given key, or if the given key has a keysize that exceeds the maximum allowable keysize (as determined from the configured jurisdiction policy files).
  - init
```
public final void init(int opmode,
        Key key,
        AlgorithmParameterSpec params)
                throws InvalidKeyException,
                       InvalidAlgorithmParameterException
```
    Initializes this cipher with a key and a set of algorithm parameters.
    The cipher is initialized for one of the following four operations: encryption, decryption, key wrapping or key unwrapping, depending on the value of opmode.
    If this cipher requires any algorithm parameters and params is null, the underlying cipher implementation is supposed to generate the required parameters itself (using provider-specific default or random values) if it is being initialized for encryption or key wrapping, and raise an InvalidAlgorithmParameterException if it is being initialized for decryption or key unwrapping. The generated parameters can be retrieved using getParameters or getIV (if the parameter is an IV).
    If this cipher requires algorithm parameters that cannot be derived from the input parameters, and there are no reasonable provider-specific default values, initialization will necessarily fail.
    If this cipher (including its underlying feedback or padding scheme) requires any random bytes (e.g., for parameter generation), it will get them using the SecureRandom implementation of the highest-priority installed provider as the source of randomness. (If none of the installed providers supply an implementation of SecureRandom, a system-provided source of randomness will be used.)
    Note that when a Cipher object is initialized, it loses all previously-acquired state. In other words, initializing a Cipher is equivalent to creating a new instance of that Cipher and initializing it.
    
    Parameters:
    opmode - the operation mode of this cipher (this is one of the following: ENCRYPT_MODE, DECRYPT_MODE, WRAP_MODE or UNWRAP_MODE)
    key - the encryption key
    params - the algorithm parameters
    
    Throws:
    
    InvalidKeyException - if the given key is inappropriate for initializing this cipher, or its keysize exceeds the maximum allowable keysize (as determined from the configured jurisdiction policy files).
    
    InvalidAlgorithmParameterException - if the given algorithm parameters are inappropriate for this cipher, or this cipher requires algorithm parameters and params is null, or the given algorithm parameters imply a cryptographic strength that would exceed the legal limits (as determined from the configured jurisdiction policy files).
  - init
```
public final void init(int opmode,
        Key key,
        AlgorithmParameterSpec params,
        SecureRandom random)
                throws InvalidKeyException,
                       InvalidAlgorithmParameterException
```
    Initializes this cipher with a key, a set of algorithm parameters, and a source of randomness.
    The cipher is initialized for one of the following four operations: encryption, decryption, key wrapping or key unwrapping, depending on the value of opmode.
    If this cipher requires any algorithm parameters and params is null, the underlying cipher implementation is supposed to generate the required parameters itself (using provider-specific default or random values) if it is being initialized for encryption or key wrapping, and raise an InvalidAlgorithmParameterException if it is being initialized for decryption or key unwrapping. The generated parameters can be retrieved using getParameters or getIV (if the parameter is an IV).
    If this cipher requires algorithm parameters that cannot be derived from the input parameters, and there are no reasonable provider-specific default values, initialization will necessarily fail.
    If this cipher (including its underlying feedback or padding scheme) requires any random bytes (e.g., for parameter generation), it will get them from random.
    Note that when a Cipher object is initialized, it loses all previously-acquired state. In other words, initializing a Cipher is equivalent to creating a new instance of that Cipher and initializing it.
    
    Parameters:
    opmode - the operation mode of this cipher (this is one of the following: ENCRYPT_MODE, DECRYPT_MODE, WRAP_MODE or UNWRAP_MODE)
    key - the encryption key
    params - the algorithm parameters
    random - the source of randomness
    
    Throws:
    
    InvalidKeyException - if the given key is inappropriate for initializing this cipher, or its keysize exceeds the maximum allowable keysize (as determined from the configured jurisdiction policy files).
    
    InvalidAlgorithmParameterException - if the given algorithm parameters are inappropriate for this cipher, or this cipher requires algorithm parameters and params is null, or the given algorithm parameters imply a cryptographic strength that would exceed the legal limits (as determined from the configured jurisdiction policy files).
  - init
```
public final void init(int opmode,
        Key key,
        AlgorithmParameters params)
                throws InvalidKeyException,
                       InvalidAlgorithmParameterException
```
    Initializes this cipher with a key and a set of algorithm parameters.
    The cipher is initialized for one of the following four operations: encryption, decryption, key wrapping or key unwrapping, depending on the value of opmode.
    If this cipher requires any algorithm parameters and params is null, the underlying cipher implementation is supposed to generate the required parameters itself (using provider-specific default or random values) if it is being initialized for encryption or key wrapping, and raise an InvalidAlgorithmParameterException if it is being initialized for decryption or key unwrapping. The generated parameters can be retrieved using getParameters or getIV (if the parameter is an IV).
    If this cipher requires algorithm parameters that cannot be derived from the input parameters, and there are no reasonable provider-specific default values, initialization will necessarily fail.
    If this cipher (including its underlying feedback or padding scheme) requires any random bytes (e.g., for parameter generation), it will get them using the SecureRandom implementation of the highest-priority installed provider as the source of randomness. (If none of the installed providers supply an implementation of SecureRandom, a system-provided source of randomness will be used.)
    Note that when a Cipher object is initialized, it loses all previously-acquired state. In other words, initializing a Cipher is equivalent to creating a new instance of that Cipher and initializing it.
    
    Parameters:
    opmode - the operation mode of this cipher (this is one of the following: ENCRYPT_MODE, DECRYPT_MODE, WRAP_MODE or UNWRAP_MODE)
    key - the encryption key
    params - the algorithm parameters
    
    Throws:
    
    InvalidKeyException - if the given key is inappropriate for initializing this cipher, or its keysize exceeds the maximum allowable keysize (as determined from the configured jurisdiction policy files).
    
    InvalidAlgorithmParameterException - if the given algorithm parameters are inappropriate for this cipher, or this cipher requires algorithm parameters and params is null, or the given algorithm parameters imply a cryptographic strength that would exceed the legal limits (as determined from the configured jurisdiction policy files).
  - init
```
public final void init(int opmode,
        Key key,
        AlgorithmParameters params,
        SecureRandom random)
                throws InvalidKeyException,
                       InvalidAlgorithmParameterException
```
    Initializes this cipher with a key, a set of algorithm parameters, and a source of randomness.
    The cipher is initialized for one of the following four operations: encryption, decryption, key wrapping or key unwrapping, depending on the value of opmode.
    If this cipher requires any algorithm parameters and params is null, the underlying cipher implementation is supposed to generate the required parameters itself (using provider-specific default or random values) if it is being initialized for encryption or key wrapping, and raise an InvalidAlgorithmParameterException if it is being initialized for decryption or key unwrapping. The generated parameters can be retrieved using getParameters or getIV (if the parameter is an IV).
    If this cipher requires algorithm parameters that cannot be derived from the input parameters, and there are no reasonable provider-specific default values, initialization will necessarily fail.
    If this cipher (including its underlying feedback or padding scheme) requires any random bytes (e.g., for parameter generation), it will get them from random.
    Note that when a Cipher object is initialized, it loses all previously-acquired state. In other words, initializing a Cipher is equivalent to creating a new instance of that Cipher and initializing it.
    
    Parameters:
    opmode - the operation mode of this cipher (this is one of the following: ENCRYPT_MODE, DECRYPT_MODE, WRAP_MODE or UNWRAP_MODE)
    key - the encryption key
    params - the algorithm parameters
    random - the source of randomness
    
    Throws:
    
    InvalidKeyException - if the given key is inappropriate for initializing this cipher, or its keysize exceeds the maximum allowable keysize (as determined from the configured jurisdiction policy files).
    
    InvalidAlgorithmParameterException - if the given algorithm parameters are inappropriate for this cipher, or this cipher requires algorithm parameters and params is null, or the given algorithm parameters imply a cryptographic strength that would exceed the legal limits (as determined from the configured jurisdiction policy files).
  - init
```
public final void init(int opmode,
        Certificate certificate)
                throws InvalidKeyException
```
    Initializes this cipher with the public key from the given certificate.
    The cipher is initialized for one of the following four operations: encryption, decryption, key wrapping or key unwrapping, depending on the value of opmode.
    If the certificate is of type X.509 and has a key usage extension field marked as critical, and the value of the key usage extension field implies that the public key in the certificate and its corresponding private key are not supposed to be used for the operation represented by the value of opmode, an InvalidKeyException is thrown.
    If this cipher requires any algorithm parameters that cannot be derived from the public key in the given certificate, the underlying cipher implementation is supposed to generate the required parameters itself (using provider-specific default or random values) if it is being initialized for encryption or key wrapping, and raise an InvalidKeyException if it is being initialized for decryption or key unwrapping. The generated parameters can be retrieved using getParameters or getIV (if the parameter is an IV).
    If this cipher requires algorithm parameters that cannot be derived from the input parameters, and there are no reasonable provider-specific default values, initialization will necessarily fail.
    If this cipher (including its underlying feedback or padding scheme) requires any random bytes (e.g., for parameter generation), it will get them using the SecureRandom implementation of the highest-priority installed provider as the source of randomness. (If none of the installed providers supply an implementation of SecureRandom, a system-provided source of randomness will be used.)
    Note that when a Cipher object is initialized, it loses all previously-acquired state. In other words, initializing a Cipher is equivalent to creating a new instance of that Cipher and initializing it.
    
    Parameters:
    opmode - the operation mode of this cipher (this is one of the following: ENCRYPT_MODE, DECRYPT_MODE, WRAP_MODE or UNWRAP_MODE)
    certificate - the certificate
    
    Throws:
    
    InvalidKeyException - if the public key in the given certificate is inappropriate for initializing this cipher, or this cipher requires algorithm parameters that cannot be determined from the public key in the given certificate, or the keysize of the public key in the given certificate has a keysize that exceeds the maximum allowable keysize (as determined by the configured jurisdiction policy files).
  - init
```
public final void init(int opmode,
        Certificate certificate,
        SecureRandom random)
                throws InvalidKeyException
```
    Initializes this cipher with the public key from the given certificate and a source of randomness.
    The cipher is initialized for one of the following four operations: encryption, decryption, key wrapping or key unwrapping, depending on the value of opmode.
    If the certificate is of type X.509 and has a key usage extension field marked as critical, and the value of the key usage extension field implies that the public key in the certificate and its corresponding private key are not supposed to be used for the operation represented by the value of opmode, an InvalidKeyException is thrown.
    If this cipher requires any algorithm parameters that cannot be derived from the public key in the given certificate, the underlying cipher implementation is supposed to generate the required parameters itself (using provider-specific default or random values) if it is being initialized for encryption or key wrapping, and raise an InvalidKeyException if it is being initialized for decryption or key unwrapping. The generated parameters can be retrieved using getParameters or getIV (if the parameter is an IV).
    If this cipher requires algorithm parameters that cannot be derived from the input parameters, and there are no reasonable provider-specific default values, initialization will necessarily fail.
    If this cipher (including its underlying feedback or padding scheme) requires any random bytes (e.g., for parameter generation), it will get them from random.
    Note that when a Cipher object is initialized, it loses all previously-acquired state. In other words, initializing a Cipher is equivalent to creating a new instance of that Cipher and initializing it.
    
    Parameters:
    opmode - the operation mode of this cipher (this is one of the following: ENCRYPT_MODE, DECRYPT_MODE, WRAP_MODE or UNWRAP_MODE)
    certificate - the certificate
    random - the source of randomness
    
    Throws:
    
    InvalidKeyException - if the public key in the given certificate is inappropriate for initializing this cipher, or this cipher requires algorithm parameters that cannot be determined from the public key in the given certificate, or the keysize of the public key in the given certificate has a keysize that exceeds the maximum allowable keysize (as determined by the configured jurisdiction policy files).
  - update
```
public final byte[] update(byte[] input)
```
    Continues a multiple-part encryption or decryption operation (depending on how this cipher was initialized), processing another data part.
    The bytes in the input buffer are processed, and the result is stored in a new buffer.
    If input has a length of zero, this method returns null.
    
    Parameters:
    input - the input buffer
    
    Returns:
    the new buffer with the result, or null if the underlying cipher is a block cipher and the input data is too short to result in a new block.
    
    Throws:
    
    IllegalStateException - if this cipher is in a wrong state (e.g., has not been initialized)
  - update
```
public final byte[] update(byte[] input,
            int inputOffset,
            int inputLen)
```
    Continues a multiple-part encryption or decryption operation (depending on how this cipher was initialized), processing another data part.
    The first inputLen bytes in the input buffer, starting at inputOffset inclusive, are processed, and the result is stored in a new buffer.
    If inputLen is zero, this method returns null.
    
    Parameters:
    input - the input buffer
    inputOffset - the offset in input where the input starts
    inputLen - the input length
    
    Returns:
    the new buffer with the result, or null if the underlying cipher is a block cipher and the input data is too short to result in a new block.
    
    Throws:
    
    IllegalStateException - if this cipher is in a wrong state (e.g., has not been initialized)
  - update
```
public final int update(byte[] input,
         int inputOffset,
         int inputLen,
         byte[] output)
                 throws ShortBufferException
```
    Continues a multiple-part encryption or decryption operation (depending on how this cipher was initialized), processing another data part.
    The first inputLen bytes in the input buffer, starting at inputOffset inclusive, are processed, and the result is stored in the output buffer.
    If the output buffer is too small to hold the result, a ShortBufferException is thrown. In this case, repeat this call with a larger output buffer. Use getOutputSize to determine how big the output buffer should be.
    If inputLen is zero, this method returns a length of zero.
    Note: this method should be copy-safe, which means the input and output buffers can reference the same byte array and no unprocessed input data is overwritten when the result is copied into the output buffer.
    
    Parameters:
    input - the input buffer
    inputOffset - the offset in input where the input starts
    inputLen - the input length
    output - the buffer for the result
    
    Returns:
    the number of bytes stored in output
    
    Throws:
    
    IllegalStateException - if this cipher is in a wrong state (e.g., has not been initialized)
    
    ShortBufferException - if the given output buffer is too small to hold the result
  - update
```
public final int update(byte[] input,
         int inputOffset,
         int inputLen,
         byte[] output,
         int outputOffset)
                 throws ShortBufferException
```
    Continues a multiple-part encryption or decryption operation (depending on how this cipher was initialized), processing another data part.
    The first inputLen bytes in the input buffer, starting at inputOffset inclusive, are processed, and the result is stored in the output buffer, starting at outputOffset inclusive.
    If the output buffer is too small to hold the result, a ShortBufferException is thrown. In this case, repeat this call with a larger output buffer. Use getOutputSize to determine how big the output buffer should be.
    If inputLen is zero, this method returns a length of zero.
    Note: this method should be copy-safe, which means the input and output buffers can reference the same byte array and no unprocessed input data is overwritten when the result is copied into the output buffer.
    
    Parameters:
    input - the input buffer
    inputOffset - the offset in input where the input starts
    inputLen - the input length
    output - the buffer for the result
    outputOffset - the offset in output where the result is stored
    
    Returns:
    the number of bytes stored in output
    
    Throws:
    
    IllegalStateException - if this cipher is in a wrong state (e.g., has not been initialized)
    
    ShortBufferException - if the given output buffer is too small to hold the result
  - update
```
public final int update(ByteBuffer input,
         ByteBuffer output)
                 throws ShortBufferException
```
    Continues a multiple-part encryption or decryption operation (depending on how this cipher was initialized), processing another data part.
    All input.remaining() bytes starting at input.position() are processed. The result is stored in the output buffer. Upon return, the input buffer's position will be equal to its limit; its limit will not have changed. The output buffer's position will have advanced by n, where n is the value returned by this method; the output buffer's limit will not have changed.
    If output.remaining() bytes are insufficient to hold the result, a ShortBufferException is thrown. In this case, repeat this call with a larger output buffer. Use getOutputSize to determine how big the output buffer should be.
    Note: this method should be copy-safe, which means the input and output buffers can reference the same block of memory and no unprocessed input data is overwritten when the result is copied into the output buffer.
    
    Parameters:
    input - the input ByteBuffer
    output - the output ByteByffer
    
    Returns:
    the number of bytes stored in output
    
    Throws:
    
    IllegalStateException - if this cipher is in a wrong state (e.g., has not been initialized)
    
    IllegalArgumentException - if input and output are the same object
    
    ReadOnlyBufferException - if the output buffer is read-only
    
    ShortBufferException - if there is insufficient space in the output buffer
    Since:
    
    1.5
  - doFinal
```
public final byte[] doFinal()
                     throws IllegalBlockSizeException,
                            BadPaddingException
```
    Finishes a multiple-part encryption or decryption operation, depending on how this cipher was initialized.
    Input data that may have been buffered during a previous update operation is processed, with padding (if requested) being applied. If an AEAD mode such as GCM/CCM is being used, the authentication tag is appended in the case of encryption, or verified in the case of decryption. The result is stored in a new buffer.
    Upon finishing, this method resets this cipher object to the state it was in when previously initialized via a call to init. That is, the object is reset and available to encrypt or decrypt (depending on the operation mode that was specified in the call to init) more data.
    Note: if any exception is thrown, this cipher object may need to be reset before it can be used again.
    
    Returns:
    the new buffer with the result
    
    Throws:
    
    IllegalStateException - if this cipher is in a wrong state (e.g., has not been initialized)
    
    IllegalBlockSizeException - if this cipher is a block cipher, no padding has been requested (only in encryption mode), and the total input length of the data processed by this cipher is not a multiple of block size; or if this encryption algorithm is unable to process the input data provided.
    
    BadPaddingException - if this cipher is in decryption mode, and (un)padding has been requested, but the decrypted data is not bounded by the appropriate padding bytes
    
    AEADBadTagException - if this cipher is decrypting in an AEAD mode (such as GCM/CCM), and the received authentication tag does not match the calculated value
  - doFinal
```
public final int doFinal(byte[] output,
          int outputOffset)
                  throws IllegalBlockSizeException,
                         ShortBufferException,
                         BadPaddingException
```
    Finishes a multiple-part encryption or decryption operation, depending on how this cipher was initialized.
    Input data that may have been buffered during a previous update operation is processed, with padding (if requested) being applied. If an AEAD mode such as GCM/CCM is being used, the authentication tag is appended in the case of encryption, or verified in the case of decryption. The result is stored in the output buffer, starting at outputOffset inclusive.
    If the output buffer is too small to hold the result, a ShortBufferException is thrown. In this case, repeat this call with a larger output buffer. Use getOutputSize to determine how big the output buffer should be.
    Upon finishing, this method resets this cipher object to the state it was in when previously initialized via a call to init. That is, the object is reset and available to encrypt or decrypt (depending on the operation mode that was specified in the call to init) more data.
    Note: if any exception is thrown, this cipher object may need to be reset before it can be used again.
    
    Parameters:
    output - the buffer for the result
    outputOffset - the offset in output where the result is stored
    
    Returns:
    the number of bytes stored in output
    
    Throws:
    
    IllegalStateException - if this cipher is in a wrong state (e.g., has not been initialized)
    
    IllegalBlockSizeException - if this cipher is a block cipher, no padding has been requested (only in encryption mode), and the total input length of the data processed by this cipher is not a multiple of block size; or if this encryption algorithm is unable to process the input data provided.
    
    ShortBufferException - if the given output buffer is too small to hold the result
    
    BadPaddingException - if this cipher is in decryption mode, and (un)padding has been requested, but the decrypted data is not bounded by the appropriate padding bytes
    
    AEADBadTagException - if this cipher is decrypting in an AEAD mode (such as GCM/CCM), and the received authentication tag does not match the calculated value
  - doFinal
```
public final byte[] doFinal(byte[] input)
                     throws IllegalBlockSizeException,
                            BadPaddingException
```
    Encrypts or decrypts data in a single-part operation, or finishes a multiple-part operation. The data is encrypted or decrypted, depending on how this cipher was initialized.
    The bytes in the input buffer, and any input bytes that may have been buffered during a previous update operation, are processed, with padding (if requested) being applied. If an AEAD mode such as GCM/CCM is being used, the authentication tag is appended in the case of encryption, or verified in the case of decryption. The result is stored in a new buffer.
    Upon finishing, this method resets this cipher object to the state it was in when previously initialized via a call to init. That is, the object is reset and available to encrypt or decrypt (depending on the operation mode that was specified in the call to init) more data.
    Note: if any exception is thrown, this cipher object may need to be reset before it can be used again.
    
    Parameters:
    input - the input buffer
    
    Returns:
    the new buffer with the result
    
    Throws:
    
    IllegalStateException - if this cipher is in a wrong state (e.g., has not been initialized)
    
    IllegalBlockSizeException - if this cipher is a block cipher, no padding has been requested (only in encryption mode), and the total input length of the data processed by this cipher is not a multiple of block size; or if this encryption algorithm is unable to process the input data provided.
    
    BadPaddingException - if this cipher is in decryption mode, and (un)padding has been requested, but the decrypted data is not bounded by the appropriate padding bytes
    
    AEADBadTagException - if this cipher is decrypting in an AEAD mode (such as GCM/CCM), and the received authentication tag does not match the calculated value
  - doFinal
```
public final byte[] doFinal(byte[] input,
             int inputOffset,
             int inputLen)
                     throws IllegalBlockSizeException,
                            BadPaddingException
```
    Encrypts or decrypts data in a single-part operation, or finishes a multiple-part operation. The data is encrypted or decrypted, depending on how this cipher was initialized.
    The first inputLen bytes in the input buffer, starting at inputOffset inclusive, and any input bytes that may have been buffered during a previous update operation, are processed, with padding (if requested) being applied. If an AEAD mode such as GCM/CCM is being used, the authentication tag is appended in the case of encryption, or verified in the case of decryption. The result is stored in a new buffer.
    Upon finishing, this method resets this cipher object to the state it was in when previously initialized via a call to init. That is, the object is reset and available to encrypt or decrypt (depending on the operation mode that was specified in the call to init) more data.
    Note: if any exception is thrown, this cipher object may need to be reset before it can be used again.
    
    Parameters:
    input - the input buffer
    inputOffset - the offset in input where the input starts
    inputLen - the input length
    
    Returns:
    the new buffer with the result
    
    Throws:
    
    IllegalStateException - if this cipher is in a wrong state (e.g., has not been initialized)
    
    IllegalBlockSizeException - if this cipher is a block cipher, no padding has been requested (only in encryption mode), and the total input length of the data processed by this cipher is not a multiple of block size; or if this encryption algorithm is unable to process the input data provided.
    
    BadPaddingException - if this cipher is in decryption mode, and (un)padding has been requested, but the decrypted data is not bounded by the appropriate padding bytes
    
    AEADBadTagException - if this cipher is decrypting in an AEAD mode (such as GCM/CCM), and the received authentication tag does not match the calculated value
  - doFinal
```
public final int doFinal(byte[] input,
          int inputOffset,
          int inputLen,
          byte[] output)
                  throws ShortBufferException,
                         IllegalBlockSizeException,
                         BadPaddingException
```
    Encrypts or decrypts data in a single-part operation, or finishes a multiple-part operation. The data is encrypted or decrypted, depending on how this cipher was initialized.
    The first inputLen bytes in the input buffer, starting at inputOffset inclusive, and any input bytes that may have been buffered during a previous update operation, are processed, with padding (if requested) being applied. If an AEAD mode such as GCM/CCM is being used, the authentication tag is appended in the case of encryption, or verified in the case of decryption. The result is stored in the output buffer.
    If the output buffer is too small to hold the result, a ShortBufferException is thrown. In this case, repeat this call with a larger output buffer. Use getOutputSize to determine how big the output buffer should be.
    Upon finishing, this method resets this cipher object to the state it was in when previously initialized via a call to init. That is, the object is reset and available to encrypt or decrypt (depending on the operation mode that was specified in the call to init) more data.
    Note: if any exception is thrown, this cipher object may need to be reset before it can be used again.
    Note: this method should be copy-safe, which means the input and output buffers can reference the same byte array and no unprocessed input data is overwritten when the result is copied into the output buffer.
    
    Parameters:
    input - the input buffer
    inputOffset - the offset in input where the input starts
    inputLen - the input length
    output - the buffer for the result
    
    Returns:
    the number of bytes stored in output
    
    Throws:
    
    IllegalStateException - if this cipher is in a wrong state (e.g., has not been initialized)
    
    IllegalBlockSizeException - if this cipher is a block cipher, no padding has been requested (only in encryption mode), and the total input length of the data processed by this cipher is not a multiple of block size; or if this encryption algorithm is unable to process the input data provided.
    
    ShortBufferException - if the given output buffer is too small to hold the result
    
    BadPaddingException - if this cipher is in decryption mode, and (un)padding has been requested, but the decrypted data is not bounded by the appropriate padding bytes
    
    AEADBadTagException - if this cipher is decrypting in an AEAD mode (such as GCM/CCM), and the received authentication tag does not match the calculated value
  - doFinal
```
public final int doFinal(byte[] input,
          int inputOffset,
          int inputLen,
          byte[] output,
          int outputOffset)
                  throws ShortBufferException,
                         IllegalBlockSizeException,
                         BadPaddingException
```
    Encrypts or decrypts data in a single-part operation, or finishes a multiple-part operation. The data is encrypted or decrypted, depending on how this cipher was initialized.
    The first inputLen bytes in the input buffer, starting at inputOffset inclusive, and any input bytes that may have been buffered during a previous update operation, are processed, with padding (if requested) being applied. If an AEAD mode such as GCM/CCM is being used, the authentication tag is appended in the case of encryption, or verified in the case of decryption. The result is stored in the output buffer, starting at outputOffset inclusive.
    If the output buffer is too small to hold the result, a ShortBufferException is thrown. In this case, repeat this call with a larger output buffer. Use getOutputSize to determine how big the output buffer should be.
    Upon finishing, this method resets this cipher object to the state it was in when previously initialized via a call to init. That is, the object is reset and available to encrypt or decrypt (depending on the operation mode that was specified in the call to init) more data.
    Note: if any exception is thrown, this cipher object may need to be reset before it can be used again.
    Note: this method should be copy-safe, which means the input and output buffers can reference the same byte array and no unprocessed input data is overwritten when the result is copied into the output buffer.
    
    Parameters:
    input - the input buffer
    inputOffset - the offset in input where the input starts
    inputLen - the input length
    output - the buffer for the result
    outputOffset - the offset in output where the result is stored
    
    Returns:
    the number of bytes stored in output
    
    Throws:
    
    IllegalStateException - if this cipher is in a wrong state (e.g., has not been initialized)
    
    IllegalBlockSizeException - if this cipher is a block cipher, no padding has been requested (only in encryption mode), and the total input length of the data processed by this cipher is not a multiple of block size; or if this encryption algorithm is unable to process the input data provided.
    
    ShortBufferException - if the given output buffer is too small to hold the result
    
    BadPaddingException - if this cipher is in decryption mode, and (un)padding has been requested, but the decrypted data is not bounded by the appropriate padding bytes
    
    AEADBadTagException - if this cipher is decrypting in an AEAD mode (such as GCM/CCM), and the received authentication tag does not match the calculated value
  - doFinal
```
public final int doFinal(ByteBuffer input,
          ByteBuffer output)
                  throws ShortBufferException,
                         IllegalBlockSizeException,
                         BadPaddingException
```
    Encrypts or decrypts data in a single-part operation, or finishes a multiple-part operation. The data is encrypted or decrypted, depending on how this cipher was initialized.
    All input.remaining() bytes starting at input.position() are processed. If an AEAD mode such as GCM/CCM is being used, the authentication tag is appended in the case of encryption, or verified in the case of decryption. The result is stored in the output buffer. Upon return, the input buffer's position will be equal to its limit; its limit will not have changed. The output buffer's position will have advanced by n, where n is the value returned by this method; the output buffer's limit will not have changed.
    If output.remaining() bytes are insufficient to hold the result, a ShortBufferException is thrown. In this case, repeat this call with a larger output buffer. Use getOutputSize to determine how big the output buffer should be.
    Upon finishing, this method resets this cipher object to the state it was in when previously initialized via a call to init. That is, the object is reset and available to encrypt or decrypt (depending on the operation mode that was specified in the call to init) more data.
    Note: if any exception is thrown, this cipher object may need to be reset before it can be used again.
    Note: this method should be copy-safe, which means the input and output buffers can reference the same byte array and no unprocessed input data is overwritten when the result is copied into the output buffer.
    
    Parameters:
    input - the input ByteBuffer
    output - the output ByteBuffer
    
    Returns:
    the number of bytes stored in output
    
    Throws:
    
    IllegalStateException - if this cipher is in a wrong state (e.g., has not been initialized)
    
    IllegalArgumentException - if input and output are the same object
    
    ReadOnlyBufferException - if the output buffer is read-only
    
    IllegalBlockSizeException - if this cipher is a block cipher, no padding has been requested (only in encryption mode), and the total input length of the data processed by this cipher is not a multiple of block size; or if this encryption algorithm is unable to process the input data provided.
    
    ShortBufferException - if there is insufficient space in the output buffer
    
    BadPaddingException - if this cipher is in decryption mode, and (un)padding has been requested, but the decrypted data is not bounded by the appropriate padding bytes
    
    AEADBadTagException - if this cipher is decrypting in an AEAD mode (such as GCM/CCM), and the received authentication tag does not match the calculated value
    Since:
    
    1.5
  - wrap
```
public final byte[] wrap(Key key)
                  throws IllegalBlockSizeException,
                         InvalidKeyException
```
    Wrap a key.
    
    Parameters:
    key - the key to be wrapped.
    
    Returns:
    the wrapped key.
    
    Throws:
    
    IllegalStateException - if this cipher is in a wrong state (e.g., has not been initialized).
    
    IllegalBlockSizeException - if this cipher is a block cipher, no padding has been requested, and the length of the encoding of the key to be wrapped is not a multiple of the block size.
    
    InvalidKeyException - if it is impossible or unsafe to wrap the key with this cipher (e.g., a hardware protected key is being passed to a software-only cipher).
  - unwrap
```
public final Key unwrap(byte[] wrappedKey,
         String wrappedKeyAlgorithm,
         int wrappedKeyType)
                 throws InvalidKeyException,
                        NoSuchAlgorithmException
```
    Unwrap a previously wrapped key.
    
    Parameters:
    wrappedKey - the key to be unwrapped.
    wrappedKeyAlgorithm - the algorithm associated with the wrapped key.
    wrappedKeyType - the type of the wrapped key. This must be one of SECRET_KEY, PRIVATE_KEY, or PUBLIC_KEY.
    
    Returns:
    the unwrapped key.
    
    Throws:
    
    IllegalStateException - if this cipher is in a wrong state (e.g., has not been initialized).
    
    NoSuchAlgorithmException - if no installed providers can create keys of type wrappedKeyType for the wrappedKeyAlgorithm.
    
    InvalidKeyException - if wrappedKey does not represent a wrapped key of type wrappedKeyType for the wrappedKeyAlgorithm.
  - getMaxAllowedKeyLength
```
public static final int getMaxAllowedKeyLength(String transformation)
                                        throws NoSuchAlgorithmException
```
    Returns the maximum key length for the specified transformation according to the installed JCE jurisdiction policy files. If JCE unlimited strength jurisdiction policy files are installed, Integer.MAX_VALUE will be returned. For more information on default key size in JCE jurisdiction policy files, please see Appendix E in the Java Cryptography Architecture Reference Guide.
    
    Parameters:
    transformation - the cipher transformation.
    
    Returns:
    the maximum key length in bits or Integer.MAX_VALUE.
    
    Throws:
    
    NullPointerException - if transformation is null.
    
    NoSuchAlgorithmException - if transformation is not a valid transformation, i.e. in the form of "algorithm" or "algorithm/mode/padding".
    Since:
    
    1.5
  - getMaxAllowedParameterSpec
```
public static final AlgorithmParameterSpec getMaxAllowedParameterSpec(String transformation)
                                                               throws NoSuchAlgorithmException
```
    Returns an AlgorithmParameterSpec object which contains the maximum cipher parameter value according to the jurisdiction policy file. If JCE unlimited strength jurisdiction policy files are installed or there is no maximum limit on the parameters for the specified transformation in the policy file, null will be returned.
    
    Parameters:
    transformation - the cipher transformation.
    
    Returns:
    an AlgorithmParameterSpec which holds the maximum value or null.
    
    Throws:
    
    NullPointerException - if transformation is null.
    
    NoSuchAlgorithmException - if transformation is not a valid transformation, i.e. in the form of "algorithm" or "algorithm/mode/padding".
    Since:
    
    1.5
  - updateAAD
```
public final void updateAAD(byte[] src)
```
    Continues a multi-part update of the Additional Authentication Data (AAD).
    Calls to this method provide AAD to the cipher when operating in modes such as AEAD (GCM/CCM). If this cipher is operating in either GCM or CCM mode, all AAD must be supplied before beginning operations on the ciphertext (via the update and doFinal methods).
    
    Parameters:
    src - the buffer containing the Additional Authentication Data
    
    Throws:
    
    IllegalArgumentException - if the src byte array is null
    
    IllegalStateException - if this cipher is in a wrong state (e.g., has not been initialized), does not accept AAD, or if operating in either GCM or CCM mode and one of the update methods has already been called for the active encryption/decryption operation
    
    UnsupportedOperationException - if the corresponding method in the CipherSpi has not been overridden by an implementation
    Since:
    
    1.7
  - updateAAD
```
public final void updateAAD(byte[] src,
             int offset,
             int len)
```
    Continues a multi-part update of the Additional Authentication Data (AAD), using a subset of the provided buffer.
    Calls to this method provide AAD to the cipher when operating in modes such as AEAD (GCM/CCM). If this cipher is operating in either GCM or CCM mode, all AAD must be supplied before beginning operations on the ciphertext (via the update and doFinal methods).
    
    Parameters:
    src - the buffer containing the AAD
    offset - the offset in src where the AAD input starts
    len - the number of AAD bytes
    
    Throws:
    
    IllegalArgumentException - if the src byte array is null, or the offset or length is less than 0, or the sum of the offset and len is greater than the length of the src byte array
    
    IllegalStateException - if this cipher is in a wrong state (e.g., has not been initialized), does not accept AAD, or if operating in either GCM or CCM mode and one of the update methods has already been called for the active encryption/decryption operation
    
    UnsupportedOperationException - if the corresponding method in the CipherSpi has not been overridden by an implementation
    Since:
    
    1.7
  - updateAAD
```
public final void updateAAD(ByteBuffer src)
```
    Continues a multi-part update of the Additional Authentication Data (AAD).
    Calls to this method provide AAD to the cipher when operating in modes such as AEAD (GCM/CCM). If this cipher is operating in either GCM or CCM mode, all AAD must be supplied before beginning operations on the ciphertext (via the update and doFinal methods).
    All src.remaining() bytes starting at src.position() are processed. Upon return, the input buffer's position will be equal to its limit; its limit will not have changed.
    
    Parameters:
    src - the buffer containing the AAD
    
    Throws:
    
    IllegalArgumentException - if the src ByteBuffer is null
    
    IllegalStateException - if this cipher is in a wrong state (e.g., has not been initialized), does not accept AAD, or if operating in either GCM or CCM mode and one of the update methods has already been called for the active encryption/decryption operation
    
    UnsupportedOperationException - if the corresponding method in the CipherSpi has not been overridden by an implementation
    Since:
    
    1.7

Submit a bug or feature
For further API reference and developer documentation, see Java SE Documentation. That documentation contains more detailed, developer-targeted descriptions, with conceptual overviews, definitions of terms, workarounds, and working code examples.
Copyright © 1993, 2015, Oracle and/or its affiliates. All rights reserved.

Class Cipher

Field Summary

Constructor Summary

Method Summary

Methods inherited from class java.lang.Object

Field Detail

ENCRYPT_MODE

DECRYPT_MODE

WRAP_MODE

UNWRAP_MODE

PUBLIC_KEY

PRIVATE_KEY

SECRET_KEY

Constructor Detail

Cipher

Method Detail

getInstance

getInstance

getInstance

getProvider

getAlgorithm

getBlockSize

getOutputSize

getIV

getParameters

getExemptionMechanism

init

init

init

init

init

init

init

init

update

update

update

update

update

doFinal

doFinal

doFinal

doFinal

doFinal

doFinal

doFinal

wrap

unwrap

getMaxAllowedKeyLength

getMaxAllowedParameterSpec

updateAAD

updateAAD

updateAAD