for Java Platform Standard Edition 7
AlgorithmParameterGenerator
AlgorithmsAlgorithmParameters
AlgorithmsCertificateFactory
TypesCertPathBuilder
AlgorithmsCertPathValidator
AlgorithmsCertStore
TypesCipher
(Encryption)
AlgorithmsConfiguration
TypesKeyAgreement
AlgorithmsKeyFactory
AlgorithmsKeyGenerator
AlgorithmsKeyManagerFactory
AlgorithmsKeyPairGenerator
AlgorithmsKeyStore
TypesMac
AlgorithmsMessageDigest
AlgorithmsPolicy
TypesSaslClient
MechanismsSaslServer
MechanismsSecretKeyFactory
AlgorithmsSecureRandom
Number
Generation (RNG) AlgorithmsSignature
AlgorithmsSSLContext
AlgorithmsTrustManagerFactory
AlgorithmsXMLSignatureFactory
/KeyInfoFactory
/TransformService)
MechanismsTransformService
) AlgorithmsNote: The Sun Provider Documentation contains specific provider and algorithm information.
The JDK Security API requires and uses a set of standard names for algorithms, certificate and keystore types. This specification establishes the following names as standard names.
In some cases naming conventions are given for forming names
that are not explicitly listed, to facilitate name consistency
across provider implementations. Items in angle brackets (such as
<digest>
and <encryption>
)
are placeholders to be replaced by a specific message digest,
encryption algorithm, or other name.
Note: Standard names are not case-sensitive.
This document includes corresponding lists of standard names relevant to the following security subareas:
AlgorithmParameterGenerator
AlgorithmsThe algorithm names in this section can be specified when
generating an instance of
AlgorithmParameterGenerator
.
Algorithm Name | Description |
---|---|
DiffieHellman | Parameters for use with the Diffie-Hellman algorithm. |
DSA | Parameters for use with the Digital Signature Algorithm. |
AlgorithmParameters
AlgorithmsThe algorithm names in this section can be specified when
generating an instance of AlgorithmParameters
.
Algorithm Name | Description |
---|---|
AES | Parameters for use with the AES algorithm. |
Blowfish | Parameters for use with the Blowfish algorithm. |
DES | Parameters for use with the DES algorithm. |
DESede | Parameters for use with the DESede algorithm. |
DiffieHellman | Parameters for use with the DiffieHellman algorithm. |
DSA | Parameters for use with the Digital Signature Algorithm. |
OAEP | Parameters for use with the OAEP algorithm. |
PBEWith<digest>And<encryption> | Parameters for use with the PBEWith<digest>And<encryption> algorithm. Examples: PBEWithMD5AndDES, and PBEWithHmacSHA1AndDESede. |
PBE | Parameters for use with the PBE algorithm. This name should not be used, in preference to the more specific PBE-algorithm names previously listed. |
RC2 | Parameters for use with the RC2 algorithm. |
CertificateFactory
TypesThe type in this section can be specified when generating an
instance of CertificateFactory
.
Type | Description |
---|---|
X.509 | The certificate type defined in X.509, also available via RFC 3280 |
CertPathBuilder
AlgorithmsThe algorithm in this section can be specified when generating
an instance of CertPathBuilder
.
Algorithm Name | Description |
---|---|
PKIX | The PKIX certification path validation algorithm as defined in
the ValidationAlgorithm service attribute.
The output of CertPathBuilder instances implementing
this algorithm is a certification path validated against the PKIX
validation algorithm. |
The following encodings may be passed to the
getEncoded
method of CertPath
or the
generateCertPath(InputStream inStream, String
encoding)
method of CertificateFactory
.
Encoding | Description |
---|---|
PKCS7 | A PKCS#7 SignedData object, with the only significant field
being certificates. In particular, the signature and the contents
are ignored. If no certificates are present, a zero-length
CertPath is assumed. Warning: PKCS#7 does not maintain
the order of certificates in a certification path. This means that
if a CertPath is converted to PKCS#7 encoded bytes and
then converted back, the order of the certificates may change,
potentially rendering the CertPath invalid. Users
should be aware of this behavior. See RSA Security for
details on PKCS7. |
PkiPath | an ASN.1 DER encoded sequence of certificates, defined as
follows:
PkiPath ::= SEQUENCE OF CertificateWithin the sequence, the order of certificates is such that the subject of the first certificate is the issuer of the second certificate, and so on. Each certificate in PkiPath
shall be unique. No certificate may appear more than once in a
value of Certificate in PkiPath . The
PkiPath format is defined in defect report 279 against
X.509 (2000) and is incorporated into Technical Corrigendum 1 (DTC
2) for the ITU-T Recommendation X.509 (2000). See the ITU website for
details. |
CertPathValidator
AlgorithmsThe algorithm in this section can be specified when generating
an instance of CertPathValidator
.
Algorithm Name | Description |
---|---|
PKIX | The PKIX certification path validation algorithm as defined in the ValidationAlgorithm service attribute. |
CertStore
TypesThe type in this section can be specified when generating an
instance of CertStore
.
Type | Description |
---|---|
Collection | A CertStore implementation that retrieves
certificates and CRLs from a Collection . This type of
CertStore is particularly useful in applications where
certificates or CRLs are received in a bag or some sort of
attachment, such as with a signed email message or in an SSL
negotiation. |
LDAP | A CertStore implementation that fetches
certificates and CRLs from an LDAP directory using the schema
defined in the LDAPSchema service
attribute. |
Cipher
(Encryption) AlgorithmsThe following names can be specified as the algorithm
component in a transformation when requesting
an instance of Cipher
.
Algorithm Name | Description |
---|---|
AES | Advanced Encryption Standard as specified by NIST in FIPS 197. Also known as the Rijndael algorithm by Joan Daemen and Vincent Rijmen, AES is a 128-bit block cipher supporting keys of 128, 192, and 256 bits. |
AESWrap | The AES key wrapping algorithm as described in RFC 3394. |
ARCFOUR | A stream cipher believed to be fully interoperable with the RC4 cipher developed by Ron Rivest. For more information, see K. Kaukonen and R. Thayer, "A Stream Cipher Encryption Algorithm 'Arcfour'", Internet Draft (expired), draft-kaukonen-cipher-arcfour-03.txt. |
Blowfish | The Blowfish block cipher designed by Bruce Schneier. |
CCM | Counter/CBC Mode, as defined in NIST Special Publication SP 800-38C. |
DES | The Digital Encryption Standard as described in FIPS PUB 46-3. |
DESede | Triple DES Encryption (also known as DES-EDE, 3DES, or Triple-DES). Data is encrypted using the DES algorithm three separate times. It is first encrypted using the first subkey, then decrypted with the second subkey, and encrypted with the third subkey. |
DESedeWrap | The DESede key wrapping algorithm as described in RFC 3217 . |
ECIES | Elliptic Curve Integrated Encryption Scheme |
GCM | Galois/Counter Mode, as defined in NIST Special Publication SP 800-38D. |
PBEWith<digest>And<encryption> PBEWith<prf>And<encryption> | The password-based encryption algorithm found in (PKCS5), using
the specified message digest (<digest>) or pseudo-random
function (<prf>) and encryption algorithm
(<encryption>). Examples:
|
RC2 | Variable-key-size encryption algorithms developed by Ron Rivest for RSA Data Security, Inc. |
RC4 | Variable-key-size encryption algorithms developed by Ron Rivest for RSA Data Security, Inc. (See note prior for ARCFOUR.) |
RC5 | Variable-key-size encryption algorithms developed by Ron Rivest for RSA Data Security, Inc. |
RSA | The RSA encryption algorithm as defined in PKCS #1 |
The following names can be specified as the mode
component in a transformation when requesting
an instance of Cipher
.
Algorithm Name | Description |
---|---|
NONE | No mode. |
CBC | Cipher Block Chaining Mode, as defined in FIPS PUB 81. |
CFB, CFBx | Cipher Feedback Mode, as defined in FIPS PUB
81. Using modes such as CFB and OFB, block ciphers can encrypt data in units smaller than the cipher's actual block size. When requesting such a mode, you may optionally specify the number of bits to be processed at a time by appending this number to the mode name as shown in the "DES/CFB8/NoPadding" and "DES/OFB32/PKCS5Padding" transformations. If no such number is specified, a provider-specific default is used. (For example, the SunJCE provider uses a default of 64 bits for DES.) Thus, block ciphers can be turned into byte-oriented stream ciphers by using an 8-bit mode such as CFB8 or OFB8. |
CTR | A simplification of OFB, Counter mode updates the input block as a counter. |
CTS | Cipher Text Stealing, as described in Bruce Schneier's book Applied Cryptography-Second Edition, John Wiley and Sons, 1996. |
ECB | Electronic Codebook Mode, as defined in FIPS PUB 81 (generally this mode should not be used for multiple blocks of data). |
OFB, OFBx | Output Feedback Mode, as defined in FIPS PUB
81. Using modes such as CFB and OFB, block ciphers can encrypt data in units smaller than the cipher's actual block size. When requesting such a mode, you may optionally specify the number of bits to be processed at a time by appending this number to the mode name as shown in the "DES/CFB8/NoPadding" and "DES/OFB32/PKCS5Padding" transformations. If no such number is specified, a provider-specific default is used. (For example, the SunJCE provider uses a default of 64 bits for DES.) Thus, block ciphers can be turned into byte-oriented stream ciphers by using an 8-bit mode such as CFB8 or OFB8. |
PCBC | Propagating Cipher Block Chaining, as defined by Kerberos V4. |
The following names can be specified as the padding
component in a transformation when requesting
an instance of Cipher
.
Algorithm Name | Description |
---|---|
NoPadding | No padding. |
ISO10126Padding | This padding for block ciphers is described in 5.2 Block Encryption Algorithms in the W3C's "XML Encryption Syntax and Processing" document. |
OAEPPadding, OAEPWith<digest>And<mgf>Padding | Optimal Asymmetric Encryption Padding scheme defined in PKCS1,
where <digest> should be replaced by the message digest and
<mgf> by the mask generation function. Examples:
OAEPWithMD5AndMGF1Padding and
OAEPWithSHA-512AndMGF1Padding. If OAEPPadding is used, Cipher objects
are initialized with a
javax.crypto.spec.OAEPParameterSpec object to supply
values needed for OAEPPadding. |
PKCS1Padding | The padding scheme described in PKCS #1, used with the RSA algorithm. |
PKCS5Padding | The padding scheme described in RSA Laboratories, "PKCS #5: Password-Based Encryption Standard," version 1.5, November 1993. |
SSL3Padding | The padding scheme defined in the SSL Protocol Version 3.0,
November 18, 1996, section 5.2.3.2 (CBC block cipher):
block-ciphered struct { opaque content[SSLCompressed.length]; opaque MAC[CipherSpec.hash_size]; uint8 padding[ GenericBlockCipher.padding_length]; uint8 padding_length; } GenericBlockCipher;The size of an instance of a GenericBlockCipher must be a multiple of the block cipher's block length. The padding length, which is always present, contributes to the padding, which implies that if: sizeof(content) + sizeof(MAC) % block_length = 0,padding has to be (block_length - 1) bytes long, because of the existence of padding_length .This makes the padding scheme similar (but not quite) to PKCS5Padding, where the padding length is encoded in the padding (and ranges from 1 to block_length). With the SSL scheme, the sizeof(padding) is encoded in the always present padding_length and therefore ranges from 0 to
block_length-1. |
Configuration
TypesThe type in this section can be specified when generating an
instance of
javax.security.auth.login.Configuration
.
Type | Description |
---|---|
JavaLoginConfig | The default Configuration implementation from the SUN provider,
as described in the ConfigFile class
specification.
This type accepts java.security.URIParameter as a
valid Configuration.Parameter type. If this parameter
is not specified, then the configuration information is loaded from
the sources described in the ConfigFile class specification. If
this parameter is specified, the configuration information is
loaded solely from the specified URI. |
The following exemption mechanism names can be specified in the permission policy file that accompanies an application considered "exempt" from cryptographic restrictions.
Algorithm Name | Description |
---|---|
KeyEscrow | An encryption system with a backup decryption capability that allows authorized persons (users, officers of an organization, and government officials), under certain prescribed conditions, to decrypt ciphertext with the help of information supplied by one or more trusted parties who hold special data recovery keys. |
KeyRecovery | A method of obtaining the secret key used to lock encrypted data. One use is as a means of providing fail-safe access to a corporation's own encrypted information in times of disaster. |
KeyWeakening | A method in which a part of the key can be escrowed or recovered. |
The following mechanisms can be specified when using GSSAPI. Note that Object Identifiers (OIDs) are specified instead of names to be consistent with the GSSAPI standard.
Mechanism OID | Description |
---|---|
1.2.840.113554.1.2.2 | The Kerberos v5 GSS-API mechanism defined in RFC 4121. |
1.3.6.1.5.5.2 | The Simple and Protected GSS-API Negotiation (SPNEGO) mechanism defined in RFC 4178. |
KeyAgreement
AlgorithmsThe following algorithm names can be specified when requesting
an instance of KeyAgreement
.
Algorithm Name | Description |
---|---|
DiffieHellman | Diffie-Hellman Key Agreement as defined in PKCS #3: Diffie-Hellman Key-Agreement Standard, RSA Laboratories, version 1.4, November 1993. |
ECDH | Elliptic Curve Diffie-Hellman as defined in ANSI X9.63 and as described in RFC 3278: "Use of Elliptic Curve Cryptography (ECC) Algorithms in Cryptographic Message Syntax (CMS)." |
ECMQV | Elliptic Curve Menezes-Qu-Vanstone as defined in "Elliptic Curve Cryptography" from www.secg.org. |
KeyFactory
Algorithms(Except as noted, these classes create keys for which
Key.getAlgorithm()
returns the standard algorithm name.)
The algorithm names in this section can be specified when
generating an instance of KeyFactory
.
Algorithm Name | Description |
---|---|
DiffieHellman | Keys for the Diffie-Hellman KeyAgreement algorithm.
Note: |
DSA | Keys for the Digital Signature Algorithm. |
RSA | Keys for the RSA algorithm (Signature/Cipher). |
EC | Keys for the Elliptic Curve algorithm. |
KeyGenerator
AlgorithmsThe following algorithm names can be specified when requesting
an instance of KeyGenerator
.
Algorithm Name | Description |
---|---|
AES | Key generator for use with the AES algorithm. |
ARCFOUR | Key generator for use with the ARCFOUR (RC4) algorithm. |
Blowfish | Key generator for use with the Blowfish algorithm. |
DES | Key generator for use with the DES algorithm. |
DESede | Key generator for use with the DESede (triple-DES) algorithm. |
HmacMD5 | Key generator for use with the HmacMD5 algorithm. |
HmacSHA1 HmacSHA256 HmacSHA384 HmacSHA512 | Keys generator for use with the various flavors of the HmacSHA algorithms. |
RC2 | Key generator for use with the RC2 algorithm. |
KeyManagerFactory
AlgorithmsThe algorithm name in this section can be specified when
generating an instance of KeyManagerFactory
.
Algorithm Name | Description |
---|---|
PKIX | A factory for X509ExtendedKeyManager s that manage
X.509 certificate-based key pairs for local side authentication
according to the rules defined by the IETF PKIX working group in
RFC 3280 or its
successor. The KeyManagerFactory must support
initialization using the class
javax.net.ssl.KeyStoreBuilderParameters . |
KeyPairGenerator
Algorithms(Except as noted, these classes create keys for which
Key.getAlgorithm()
returns the standard algorithm name.)
The algorithm names in this section can be specified when
generating an instance of KeyPairGenerator
.
Algorithm Name | Description |
---|---|
DiffieHellman | Generates keypairs for the Diffie-Hellman KeyAgreement
algorithm.
Note: |
DSA | Generates keypairs for the Digital Signature Algorithm. |
RSA | Generates keypairs for the RSA algorithm (Signature/Cipher). |
EC | Generates keypairs for the Elliptic Curve algorithm. |
KeyStore
TypesThe types in this section can be specified when generating an
instance of KeyStore
.
Type | Description |
---|---|
jceks | The proprietary keystore implementation provided by the SunJCE provider. |
jks | The proprietary keystore implementation provided by the SUN provider. |
pkcs12 | The transfer syntax for personal identity information as defined in PKCS #12. |
Mac
AlgorithmsThe following algorithm names can be specified when requesting
an instance of Mac
.
Algorithm Name | Description |
---|---|
HmacMD5 | The HMAC-MD5 keyed-hashing algorithm as defined in RFC 2104 "HMAC: Keyed-Hashing for Message Authentication" (February 1997). |
HmacSHA1 HmacSHA256 HmacSHA384 HmacSHA512 |
The HmacSHA* algorithms as defined in RFC 2104 "HMAC:
Keyed-Hashing for Message Authentication" (February 1997) with
SHA-* as the message digest algorithm. |
PBEWith<mac> | Mac for use with the PKCS #5 v 2.0 password-based message authentication standard, where <mac> is a Message Authentication Code algorithm name. Example: PBEWithHmacSHA1. |
MessageDigest
AlgorithmsThe algorithm names in this section can be specified when
generating an instance of MessageDigest
.
Algorithm Name | Description |
---|---|
MD2 | The MD2 message digest algorithm as defined in RFC 1319. |
MD5 | The MD5 message digest algorithm as defined in RFC 1321. |
SHA-1 SHA-256 SHA-384 SHA-512 |
Hash algorithms defined in the FIPS PUB
180-2. SHA-256 is a 256-bit hash function intended to provide 128 bits of security against collision attacks, while SHA-512 is a 512-bit hash function intended to provide 256 bits of security. A 384-bit hash may be obtained by truncating the SHA-512 output. |
Policy
TypesThe type in this section can be specified when generating an
instance of Policy
.
Type | Description |
---|---|
JavaPolicy | The default Policy implementation from the SUN provider, as
described in the PolicyFile guide.
This type accepts java.security.URIParameter as a
valid Policy.Parameter type. If this parameter is not
specified, then the policy information is loaded from the sources
described in the Default
Policy File Locations section of the PolicyFile guide. If this
parameter is specified, the policy information is loaded solely
from the specified URI. |
SaslClient
MechanismsThe mechanisms in this section can be specified when generating
an instance of SaslClient
.
Mechanism | Description |
---|---|
CRAM-MD5 | See RFC 2195. This mechanism supports a hashed username/password authentication scheme. |
DIGEST-MD5 | See RFC 2831. This mechanism defines how HTTP Digest Authentication can be used as a SASL mechanism. |
EXTERNAL | See RFC 2222. This mechanism obtains authentication information from an external channel (such as TLS or IPsec). |
GSSAPI | See RFC 2222. This mechanism uses the GSSAPI for obtaining authentication information. It supports Kerberos v5 authentication. |
PLAIN | See RFC 2595. This mechanism supports cleartext user name/password authentication. |
SaslServer
MechanismsThe mechanisms in this section can be specified when generating
an instance of SaslServer
.
Mechanism | Description |
---|---|
CRAM-MD5 | See RFC 2195. This mechanism supports a hashed user name/password authentication scheme. |
DIGEST-MD5 | See RFC 2831. This mechanism defines how HTTP Digest Authentication can be used as a SASL mechanism. |
GSSAPI | See RFC 2222. This mechanism uses the GSSAPI for obtaining authentication information. It supports Kerberos v5 authentication. |
SecretKeyFactory
AlgorithmsThe following algorithm names can be specified when requesting
an instance of SecretKeyFactory
.
Algorithm Name | Description |
---|---|
AES | Constructs secret keys for use with the AES algorithm. |
ARCFOUR | Constructs secret keys for use with the ARCFOUR algorithm. |
DES | Constructs secrets keys for use with the DES algorithm. |
DESede | Constructs secrets keys for use with the DESede (Triple-DES) algorithm. |
PBEWith<digest>And<encryption> PBEWith<prf>And<encryption> |
Secret-key factory for use with PKCS5 password-based
encryption, where <digest> is a message digest, <prf>
is a pseudo-random function, and <encryption> is an
encryption algorithm.
Examples:
|
PBKDF2WithHmacSHA1 | Constructs secret keys using the Password-Based Key Derivation Function function found in PKCS #5 v2.0. |
SecureRandom
Number Generation (RNG)
AlgorithmsThe algorithm name in this section can be specified when
generating an instance of SecureRandom
.
Algorithm Name | Description |
---|---|
SHA1PRNG | The name of the pseudo-random number generation (PRNG) algorithm supplied by the SUN provider. This algorithm uses SHA-1 as the foundation of the PRNG. It computes the SHA-1 hash over a true-random seed value concatenated with a 64-bit counter which is incremented by 1 for each operation. From the 160-bit SHA-1 output, only 64 bits are used. |
A cryptographic service is always associated with a particular
algorithm or type. For example, a digital signature service is
always associated with a particular algorithm (for example, DSA),
and a CertificateFactory
service is always associated
with a particular certificate type (for example, X.509).
The attributes in this section are for cryptographic services. The service attributes can be used as filters for selecting providers.
Both the attribute name and value are case-insensitive.
Attribute | Description |
---|---|
KeySize | The maximum key size that the provider supports for the cryptographic service. |
ImplementedIn | Whether the implementation for the cryptographic service is done by software or hardware. The value of this attribute is "software" or "hardware". |
ValidationAlgorithm | The name of the specification that defines the certification
path validation algorithm that an implementation of
CertPathBuilder or CertPathValidator
supports. RFCs should be specified as "RFC#" (ex: "RFC3280") and
Internet Drafts as the name of the draft (ex:
"draft-ietf-pkix-rfc2560bis-01.txt"). Values for this attribute
that are specified as selection criteria to the
Security.getProviders method will be compared using
the String.equalsIgnoreCase method. All PKIX
implementations of CertPathBuilder and
CertPathValidator should provide a value for this
attribute. |
LDAPSchema | The name of the specification that defines the LDAP schema that
an implementation of an LDAP CertStore uses to
retrieve certificates and CRLs. The format and semantics of this
attribute is the same as described for the ValidationAlgorithm
attribute. All LDAP implementations of CertStore
should provide a value for this attribute. |
For example:
map.put("KeyPairGenerator.DSA", "sun.security.provider.DSAKeyPairGenerator"); map.put("KeyPairGenerator.DSA KeySize", "1024"); map.put("KeyPairGenerator.DSA ImplementedIn", "Software");
Signature
AlgorithmsThe algorithm names in this section can be specified when
generating an instance of Signature
.
Algorithm Name | Description |
---|---|
NONEwithRSA | The RSA signature algorithm, which does not use a digesting algorithm (for example, MD5/SHA1) before performing the RSA operation. For more information about the RSA Signature algorithms, see PKCS #1. |
MD2withRSA MD5withRSA |
The MD2/MD5 with RSA Encryption signature algorithm, which uses the MD2/MD5 digest algorithm and RSA to create and verify RSA digital signatures as defined in PKCS #1. |
SHA1withRSA SHA256withRSA SHA384withRSA SHA512withRSA |
The signature algorithm with SHA-* and the RSA encryption algorithm as defined in the OSI Interoperability Workshop, using the padding conventions described in PKCS #1. |
NONEwithDSA | The Digital Signature Algorithm as defined in FIPS PUB 186-2. The data must be exactly 20 bytes in length. This algorithm is also known as rawDSA. |
SHA1withDSA | The DSA with SHA-1 signature algorithm, which uses the SHA-1 digest algorithm and DSA to create and verify DSA digital signatures as defined in FIPS PUB 186. |
NONEwithECDSA SHA1withECDSA SHA256withECDSA SHA384withECDSA SHA512withECDSA (ECDSA) |
The ECDSA signature algorithms as defined in ANSI
X9.62.
Note:"ECDSA" is an ambiguous name for the "SHA1withECDSA" algorithm and should not be used. The formal name "SHA1withECDSA" should be used instead. |
<digest>with<encryption> | Use this to form a name for a signature algorithm with a
particular message digest (such as MD2 or MD5) and algorithm (such
as RSA or DSA), just as was done for the explicitly defined
standard names in this section (MD2withRSA, and so on).
For the new signature schemes defined in PKCS #1 v 2.0, for which the <digest>with<encryption> form is insufficient, <digest>with<encryption>and<mgf> can be used to form a name. Here, <mgf> should be replaced by a mask generation function such as MGF1. Example: MD5withRSAandMGF1. |
SSLContext
AlgorithmsThe algorithm names in this section can be specified when
generating an instance of SSLContext
.
Algorithm Name | Description |
---|---|
SSL | Supports some version of SSL; may support other versions |
SSLv2 | Supports SSL version 2 or later; may support other versions |
SSLv3 | Supports SSL version 3; may support other versions |
TLS | Supports some version of TLS; may support other versions |
TLSv1 | Supports RFC 2246: TLS version 1.0 ; may support other versions |
TLSv1.1 | Supports RFC 4346: TLS version 1.1 ; may support other versions |
TLSv1.2 | Supports RFC 5246: TLS version 1.2 ; may support other versions |
TrustManagerFactory
AlgorithmsThe algorithm name in this section can be specified when
generating an instance of TrustManagerFactory
.
Algorithm Name | Description |
---|---|
PKIX | A factory for X509ExtendedTrustManager objects
that validate certificate chains according to the rules defined by
the IETF PKIX working group in RFC 3280 or its
successor. The TrustManagerFactory must support
initialization using the class
javax.net.ssl.CertPathTrustManagerParameters . |
XMLSignatureFactory
/KeyInfoFactory
/TransformService
)
MechanismsThe mechanism in this section can be specified when generating
an instance of XMLSignatureFactory
,
KeyInfoFactory
, or TransformService
. The
mechanism identifies the XML processing mechanism that an
implementation uses internally to parse and generate XML signature
and KeyInfo structures. Also, note that each
TransformService
instance supports a specific
transform algorithm in addition to a mechanism. The standard names
for the transform algorithms are defined in the next section.
Mechanism | Description |
---|---|
DOM | The Document Object Model. See DOM Mechanism Requirements for additional requirements for DOM implementations. |
TransformService
)
AlgorithmsThe algorithms in this section can be specified when generating
an instance of TransformService
. Note that URIs are
specified instead of names to be consistent with the XML Signature
standard. API constants have been defined for each of these URIs,
and these are listed in parentheses after each URI in the table
that follows.
Algorithm URI | Description |
---|---|
http://www.w3.org/TR/2001/REC-xml-c14n-20010315
(CanonicalizationMethod.INCLUSIVE ) |
The Canonical XML (without comments) canonicalization algorithm. |
http://www.w3.org/TR/2001/REC-xml-c14n-20010315#WithComments
(CanonicalizationMethod.INCLUSIVE_WITH_COMMENTS ) |
The Canonical XML with comments canonicalization algorithm. |
http://www.w3.org/2001/10/xml-exc-c14n#
(CanonicalizationMethod.EXCLUSIVE ) |
The Exclusive Canonical XML (without comments) canonicalization algorithm. |
http://www.w3.org/2001/10/xml-exc-c14n#WithComments
(CanonicalizationMethod.EXCLUSIVE_WITH_COMMENTS ) |
The Exclusive Canonical XML with comments canonicalization algorithm. |
http://www.w3.org/2000/09/xmldsig#base64
(Transform.BASE64 ) |
The Base64 transform algorithm. |
http://www.w3.org/2000/09/xmldsig#enveloped-signature
(Transform.ENVELOPED ) |
The Enveloped Signature transform algorithm. |
http://www.w3.org/TR/1999/REC-xpath-19991116
(Transform.XPATH ) |
The XPath transform algorithm. |
http://www.w3.org/2002/06/xmldsig-filter2
(Transform.XPATH2 ) |
The XPath Filter 2 transform algorithm. |
http://www.w3.org/TR/1999/REC-xslt-19991116
(Transform.XSLT ) |
The XSLT transform algorithm. |
The following list contains the standard JSSE cipher suite
names. Over time, various groups have added additional cipher
suites to the SSL/TLS namespace. Some JSSE cipher suite names were
defined before TLSv1.0 was finalized, and were therefore given the
SSL_
prefix. The names mentioned in the TLS RFCs
prefixed with TLS_
are functionally equivalent to the
JSSE cipher suites prefixed with SSL_
.
SSL_DH_anon_EXPORT_WITH_DES40_CBC_SHA |
SSL_DH_anon_EXPORT_WITH_RC4_40_MD5 |
SSL_DH_anon_WITH_3DES_EDE_CBC_SHA |
TLS_DH_anon_WITH_AES_128_CBC_SHA |
TLS_DH_anon_WITH_AES_128_CBC_SHA256 |
TLS_DH_anon_WITH_AES_128_GCM_SHA256 |
TLS_DH_anon_WITH_AES_256_CBC_SHA |
TLS_DH_anon_WITH_AES_256_CBC_SHA256 |
TLS_DH_anon_WITH_AES_256_GCM_SHA384 |
TLS_DH_anon_WITH_CAMELLIA_128_CBC_SHA |
TLS_DH_anon_WITH_CAMELLIA_128_CBC_SHA256 |
TLS_DH_anon_WITH_CAMELLIA_256_CBC_SHA |
TLS_DH_anon_WITH_CAMELLIA_256_CBC_SHA256 |
SSL_DH_anon_WITH_DES_CBC_SHA |
SSL_DH_anon_WITH_RC4_128_MD5 |
TLS_DH_anon_WITH_SEED_CBC_SHA |
SSL_DH_DSS_EXPORT_WITH_DES40_CBC_SHA |
SSL_DH_DSS_WITH_3DES_EDE_CBC_SHA |
TLS_DH_DSS_WITH_AES_128_CBC_SHA |
TLS_DH_DSS_WITH_AES_128_CBC_SHA256 |
TLS_DH_DSS_WITH_AES_128_GCM_SHA256 |
TLS_DH_DSS_WITH_AES_256_CBC_SHA |
TLS_DH_DSS_WITH_AES_256_CBC_SHA256 |
TLS_DH_DSS_WITH_AES_256_GCM_SHA384 |
TLS_DH_DSS_WITH_CAMELLIA_128_CBC_SHA |
TLS_DH_DSS_WITH_CAMELLIA_128_CBC_SHA256 |
TLS_DH_DSS_WITH_CAMELLIA_256_CBC_SHA |
TLS_DH_DSS_WITH_CAMELLIA_256_CBC_SHA256 |
SSL_DH_DSS_WITH_DES_CBC_SHA |
TLS_DH_DSS_WITH_SEED_CBC_SHA |
SSL_DH_RSA_EXPORT_WITH_DES40_CBC_SHA |
SSL_DH_RSA_WITH_3DES_EDE_CBC_SHA |
TLS_DH_RSA_WITH_AES_128_CBC_SHA |
TLS_DH_RSA_WITH_AES_128_CBC_SHA256 |
TLS_DH_RSA_WITH_AES_128_GCM_SHA256 |
TLS_DH_RSA_WITH_AES_256_CBC_SHA |
TLS_DH_RSA_WITH_AES_256_CBC_SHA256 |
TLS_DH_RSA_WITH_AES_256_GCM_SHA384 |
TLS_DH_RSA_WITH_CAMELLIA_128_CBC_SHA |
TLS_DH_RSA_WITH_CAMELLIA_128_CBC_SHA256 |
TLS_DH_RSA_WITH_CAMELLIA_256_CBC_SHA |
TLS_DH_RSA_WITH_CAMELLIA_256_CBC_SHA256 |
SSL_DH_RSA_WITH_DES_CBC_SHA |
TLS_DH_RSA_WITH_SEED_CBC_SHA |
SSL_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA |
SSL_DHE_DSS_EXPORT1024_WITH_DES_CBC_SHA |
SSL_DHE_DSS_EXPORT1024_WITH_RC4_56_SHA |
SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA |
TLS_DHE_DSS_WITH_AES_128_CBC_SHA |
TLS_DHE_DSS_WITH_AES_128_CBC_SHA256 |
TLS_DHE_DSS_WITH_AES_128_GCM_SHA256 |
TLS_DHE_DSS_WITH_AES_256_CBC_SHA |
TLS_DHE_DSS_WITH_AES_256_CBC_SHA256 |
TLS_DHE_DSS_WITH_AES_256_GCM_SHA384 |
TLS_DHE_DSS_WITH_CAMELLIA_128_CBC_SHA |
TLS_DHE_DSS_WITH_CAMELLIA_128_CBC_SHA256 |
TLS_DHE_DSS_WITH_CAMELLIA_256_CBC_SHA |
TLS_DHE_DSS_WITH_CAMELLIA_256_CBC_SHA256 |
SSL_DHE_DSS_WITH_DES_CBC_SHA |
SSL_DHE_DSS_WITH_RC4_128_SHA |
TLS_DHE_DSS_WITH_SEED_CBC_SHA |
TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA |
TLS_DHE_PSK_WITH_AES_128_CBC_SHA |
TLS_DHE_PSK_WITH_AES_128_CBC_SHA256 |
TLS_DHE_PSK_WITH_AES_128_GCM_SHA256 |
TLS_DHE_PSK_WITH_AES_256_CBC_SHA |
TLS_DHE_PSK_WITH_AES_256_CBC_SHA384 |
TLS_DHE_PSK_WITH_AES_256_GCM_SHA384 |
TLS_DHE_PSK_WITH_NULL_SHA |
TLS_DHE_PSK_WITH_NULL_SHA256 |
TLS_DHE_PSK_WITH_NULL_SHA384 |
TLS_DHE_PSK_WITH_RC4_128_SHA |
SSL_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA |
SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA |
TLS_DHE_RSA_WITH_AES_128_CBC_SHA |
TLS_DHE_RSA_WITH_AES_128_CBC_SHA256 |
TLS_DHE_RSA_WITH_AES_128_GCM_SHA256 |
TLS_DHE_RSA_WITH_AES_256_CBC_SHA |
TLS_DHE_RSA_WITH_AES_256_CBC_SHA256 |
TLS_DHE_RSA_WITH_AES_256_GCM_SHA384 |
TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA |
TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 |
TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA |
TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256 |
SSL_DHE_RSA_WITH_DES_CBC_SHA |
TLS_DHE_RSA_WITH_SEED_CBC_SHA |
TLS_ECDH_anon_WITH_3DES_EDE_CBC_SHA |
TLS_ECDH_anon_WITH_AES_128_CBC_SHA |
TLS_ECDH_anon_WITH_AES_256_CBC_SHA |
TLS_ECDH_anon_WITH_NULL_SHA |
TLS_ECDH_anon_WITH_RC4_128_SHA |
TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA |
TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA |
TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256 |
TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256 |
TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA |
TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384 |
TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384 |
TLS_ECDH_ECDSA_WITH_NULL_SHA |
TLS_ECDH_ECDSA_WITH_RC4_128_SHA |
TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA |
TLS_ECDH_RSA_WITH_AES_128_CBC_SHA |
TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256 |
TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256 |
TLS_ECDH_RSA_WITH_AES_256_CBC_SHA |
TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384 |
TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384 |
TLS_ECDH_RSA_WITH_NULL_SHA |
TLS_ECDH_RSA_WITH_RC4_128_SHA |
TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA |
TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA |
TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 |
TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 |
TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA |
TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384 |
TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384 |
TLS_ECDHE_ECDSA_WITH_NULL_SHA |
TLS_ECDHE_ECDSA_WITH_RC4_128_SHA |
TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA |
TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA |
TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256 |
TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA |
TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384 |
TLS_ECDHE_PSK_WITH_NULL_SHA |
TLS_ECDHE_PSK_WITH_NULL_SHA256 |
TLS_ECDHE_PSK_WITH_NULL_SHA384 |
TLS_ECDHE_PSK_WITH_RC4_128_SHA |
TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA |
TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA |
TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 |
TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 |
TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA |
TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384 |
TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 |
TLS_ECDHE_RSA_WITH_NULL_SHA |
TLS_ECDHE_RSA_WITH_RC4_128_SHA |
TLS_EMPTY_RENEGOTIATION_INFO_SCSV * |
SSL_FORTEZZA_DMS_WITH_FORTEZZA_CBC_SHA |
SSL_FORTEZZA_DMS_WITH_NULL_SHA |
TLS_KRB5_EXPORT_WITH_DES_CBC_40_MD5 |
TLS_KRB5_EXPORT_WITH_DES_CBC_40_SHA |
TLS_KRB5_EXPORT_WITH_RC2_CBC_40_MD5 |
TLS_KRB5_EXPORT_WITH_RC2_CBC_40_SHA |
TLS_KRB5_EXPORT_WITH_RC4_40_MD5 |
TLS_KRB5_EXPORT_WITH_RC4_40_SHA |
TLS_KRB5_WITH_3DES_EDE_CBC_MD5 |
TLS_KRB5_WITH_3DES_EDE_CBC_SHA |
TLS_KRB5_WITH_DES_CBC_MD5 |
TLS_KRB5_WITH_DES_CBC_SHA |
TLS_KRB5_WITH_IDEA_CBC_MD5 |
TLS_KRB5_WITH_IDEA_CBC_SHA |
TLS_KRB5_WITH_RC4_128_MD5 |
TLS_KRB5_WITH_RC4_128_SHA |
TLS_PSK_WITH_3DES_EDE_CBC_SHA |
TLS_PSK_WITH_AES_128_CBC_SHA |
TLS_PSK_WITH_AES_128_CBC_SHA256 |
TLS_PSK_WITH_AES_128_GCM_SHA256 |
TLS_PSK_WITH_AES_256_CBC_SHA |
TLS_PSK_WITH_AES_256_CBC_SHA384 |
TLS_PSK_WITH_AES_256_GCM_SHA384 |
TLS_PSK_WITH_NULL_SHA |
TLS_PSK_WITH_NULL_SHA256 |
TLS_PSK_WITH_NULL_SHA384 |
TLS_PSK_WITH_RC4_128_SHA |
SSL_RSA_EXPORT_WITH_DES40_CBC_SHA |
SSL_RSA_EXPORT_WITH_RC2_CBC_40_MD5 |
SSL_RSA_EXPORT_WITH_RC4_40_MD5 |
SSL_RSA_EXPORT1024_WITH_DES_CBC_SHA |
SSL_RSA_EXPORT1024_WITH_RC4_56_SHA |
SSL_RSA_FIPS_WITH_3DES_EDE_CBC_SHA |
SSL_RSA_FIPS_WITH_DES_CBC_SHA |
TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA |
TLS_RSA_PSK_WITH_AES_128_CBC_SHA |
TLS_RSA_PSK_WITH_AES_128_CBC_SHA256 |
TLS_RSA_PSK_WITH_AES_128_GCM_SHA256 |
TLS_RSA_PSK_WITH_AES_256_CBC_SHA |
TLS_RSA_PSK_WITH_AES_256_CBC_SHA384 |
TLS_RSA_PSK_WITH_AES_256_GCM_SHA384 |
TLS_RSA_PSK_WITH_NULL_SHA |
TLS_RSA_PSK_WITH_NULL_SHA256 |
TLS_RSA_PSK_WITH_NULL_SHA384 |
TLS_RSA_PSK_WITH_RC4_128_SHA |
SSL_RSA_WITH_3DES_EDE_CBC_SHA |
TLS_RSA_WITH_AES_128_CBC_SHA |
TLS_RSA_WITH_AES_128_CBC_SHA256 |
TLS_RSA_WITH_AES_128_GCM_SHA256 |
TLS_RSA_WITH_AES_256_CBC_SHA |
TLS_RSA_WITH_AES_256_CBC_SHA256 |
TLS_RSA_WITH_AES_256_GCM_SHA384 |
TLS_RSA_WITH_CAMELLIA_128_CBC_SHA |
TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256 |
TLS_RSA_WITH_CAMELLIA_256_CBC_SHA |
TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256 |
SSL_RSA_WITH_DES_CBC_SHA |
SSL_RSA_WITH_IDEA_CBC_SHA |
SSL_RSA_WITH_NULL_MD5 |
SSL_RSA_WITH_NULL_SHA |
TLS_RSA_WITH_NULL_SHA256 |
SSL_RSA_WITH_RC4_128_MD5 |
SSL_RSA_WITH_RC4_128_SHA |
TLS_RSA_WITH_SEED_CBC_SHA |
TLS_SRP_SHA_DSS_WITH_3DES_EDE_CBC_SHA |
TLS_SRP_SHA_DSS_WITH_AES_128_CBC_SHA |
TLS_SRP_SHA_DSS_WITH_AES_256_CBC_SHA |
TLS_SRP_SHA_RSA_WITH_3DES_EDE_CBC_SHA |
TLS_SRP_SHA_RSA_WITH_AES_128_CBC_SHA |
TLS_SRP_SHA_RSA_WITH_AES_256_CBC_SHA |
TLS_SRP_SHA_WITH_3DES_EDE_CBC_SHA |
TLS_SRP_SHA_WITH_AES_128_CBC_SHA |
TLS_SRP_SHA_WITH_AES_256_CBC_SHA |
*
TLS_EMPTY_RENEGOTIATION_INFO_SCSV
is a new
pseudo-cipher suite to support RFC 5746. Read the Transport
Layer Security (TLS) Renegotiation Issue section of the JSEE
Reference Guide for more information.
The keyType
parameter passed to the
chooseClientAlias
, chooseServerAlias
,
getClientAliases
, and getServerAliases
methods of X509KeyManager
specifies the public key
types. Each row of the table that follows lists the standard name
that should be used for keyType
, given the specified
certificate type.
Name | Certificate Type |
---|---|
RSA | RSA |
DSA | DSA |
DH_RSA | Diffie-Hellman with RSA signature |
DH_DSA | Diffie-Hellman with DSA signature |
EC | Elliptic Curve |
EC_EC | Elliptic Curve with ECDSA signature |
EC_RSA | Elliptic Curve with RSA signature |
The protocols
parameter passed to the
setEnabledProtocols
method of SSLSocket
specifies the protocol versions to be enabled for use on the
connection. The table that follows lists the standard names that
can be passed to setEnabledProtocols
or that may be
returned by the SSLSocket getSupportedProtocols
and
getEnabledProtocols
methods.
Name | Protocol |
---|---|
SSLv2 | SSL version 2 protocol |
SSLv3 | SSL version 3 protocol |
TLSv1 | TLS version 1.0 protocol (defined in RFC 2246) |
TLSv1.1 | TLS version 1.1 protocol (defined in RFC 4346) |
TLSv1.2 | TLS version 1.2 protocol (defined in RFC 5246) |
SSLv2Hello | Currently, the SSLv3, TLSv1, and TLSv1.1 protocols allow you to
send SSLv3, TLSv1, and TLSv1.1 hellos encapsulated in an SSLv2
format hello. For more details on the reasons for allowing this
compatibility in these protocols, see Appendix E in the appropriate
RFCs (previously listed). Note that some SSL/TLS servers do not support the v2 hello format and require that client hellos conform to the SSLv3 or TLSv1 client hello formats. The SSLv2Hello option controls the SSLv2 encapsulation. If SSLv2Hello is disabled on the client, then all outgoing messages will conform to the SSLv3/TLSv1 client hello format. If SSLv2Hello is disabled on the server, then all incoming messages must conform to the SSLv3/TLSv1 client hello format. |
The authType
parameter passed to the
checkClientTrusted
and checkServerTrusted
methods of X509TrustManager
indicates the
authentication type. The table that follows specifies what standard
names should be used for the client or server certificate
chains.
Client or Server Certificate Chain | Authentication Type Standard Name |
---|---|
Client | Determined by the actual certificate used. For instance, if
RSAPublicKey is used, the authType should be
"RSA". |
Server | The key exchange algorithm portion of the cipher suites
represented as a String, such as "RSA" or "DHE_DSS". Note: For some
exportable cipher suites, the key exchange algorithm is determined
at runtime during the handshake. For instance, for
TLS_RSA_EXPORT_WITH_RC4_40_MD5, the authType should be
"RSA_EXPORT" when an ephemeral RSA key is used for the key
exchange, and "RSA" when the key from the server certificate is
used. Or it can take the value "UNKNOWN". |
The Java SE 7 release supports endpoint identification
algorithms for TLS 1.2. The algorithm name can be passed to the
setEndpointIdentificationAlgorithm()
method of
javax.net.ssl.SSLParameters
. The following table shows
the currently recognized names.
Endpoint Identification Algorithm Name |
Specification |
---|---|
HTTPS | http://www.ietf.org/rfc/rfc2818.txt |
LDAPS | http://www.ietf.org/rfc/rfc2830.txt |
This section specifies details concerning some of the algorithms defined in this document. Any provider supplying an implementation of the listed algorithms must comply with the specifications in this section.
To add a new algorithm not specified here, you should first survey other people or companies supplying provider packages to see if they have already added that algorithm, and, if so, use the definitions they published, if available. Otherwise, you should create and make available a template, similar to those found in this section, with the specifications for the algorithm you provide.
The following table shows the fields of the algorithm specifications.
Field | Description |
---|---|
Name | The name by which the algorithm is known. This is
the name passed to the getInstance method (when
requesting the algorithm), and returned by the
getAlgorithm method to determine the name of an
existing algorithm object. These methods are in the relevant engine
classes: Signature ,
MessageDigest ,
KeyPairGenerator , and
AlgorithmParameterGenerator
. |
Type | The type of algorithm: Signature ,
MessageDigest , KeyPairGenerator , or
ParameterGenerator . |
Description | General notes about the algorithm, including any standards implemented by the algorithm, applicable patents, and so on. |
KeyPair Algorithm
(optional) |
The keypair algorithm for this algorithm. |
Keysize (optional) | For a keyed algorithm or key generation algorithm: the valid keysizes. |
Size (optional) |
For an algorithm parameter generation algorithm: the valid "sizes" for algorithm parameter generation. |
Parameter Defaults (optional) |
For a key generation algorithm: the default parameter values. |
|
For a Signature algorithm, the format
of the signature, that is, the input and output of the verify and
sign methods, respectively. |
Field | Description | |
---|---|---|
Name | SHA-1 | |
Type | MessageDigest |
|
Description | The message digest algorithm as defined in NIST's FIPS 180-2. The output of this algorithm is a 160-bit digest. |
Field | Description | |
---|---|---|
Name | MD2 | |
Type | MessageDigest |
|
Description | The message digest algorithm as defined in RFC 1319. The output of this algorithm is a 128-bit (16 byte) digest. |
Field | Description | |
---|---|---|
Name | MD5 | |
Type | MessageDigest |
|
Description | The message digest algorithm as defined in RFC 1321. The output of this algorithm is a 128-bit (16 byte) digest. |
Field | Description | |
---|---|---|
Name | SHA1withDSA | |
Type | Signature |
|
Description | This algorithm is the signature algorithm described in NIST FIPS 186, using DSA with the SHA-1 message digest algorithm. | |
KeyPair Algorithm |
DSA | |
Signature Format | ASN.1 sequence of two INTEGER values:
r and s , in that order:SEQUENCE ::= { r INTEGER, s INTEGER } |
Field | Description | |
---|---|---|
Names | MD2withRSA, MD5withRSA and SHA1withRSA | |
Type | Signature |
|
Description | These are the signature algorithms that use the MD2, MD5, and SHA-1 message digest algorithms (respectively) with RSA encryption. | |
KeyPair Algorithm |
RSA | |
Signature Format | DER-encoded PKCS1 block as defined in RSA Laboratories, PKCS #1. The data encrypted is the digest of the data signed. |
Field | Description | |
---|---|---|
Name | DSA | |
Type | KeyPairGenerator |
|
Description | This algorithm is the key pair generation algorithm described NIST FIPS 186 for DSA. | |
Keysize | The length, in bits, of the modulus
p . This must range from 512 to 1024, and must be a
multiple of 64. The default keysize is 1024. |
|
Parameter Defaults |
The following default parameter values are used for keysizes of 512, 768, and 1024 bits: 512-bit Key ParametersSEED = b869c82b 35d70e1b 1ff91b28 e37a62ec dc34409b counter = 123 p = fca682ce 8e12caba 26efccf7 110e526d b078b05e decbcd1e b4a208f3 ae1617ae 01f35b91 a47e6df6 3413c5e1 2ed0899b cd132acd 50d99151 bdc43ee7 37592e17 q = 962eddcc 369cba8e bb260ee6 b6a126d9 346e38c5 g = 678471b2 7a9cf44e e91a49c5 147db1a9 aaf244f0 5a434d64 86931d2d 14271b9e 35030b71 fd73da17 9069b32e 2935630e 1c206235 4d0da20a 6c416e50 be794ca4 768-bit key parametersSEED = 77d0f8c4 dad15eb8 c4f2f8d6 726cefd9 6d5bb399 counter = 263 p = e9e64259 9d355f37 c97ffd35 67120b8e 25c9cd43 e927b3a9 670fbec5 d8901419 22d2c3b3 ad248009 3799869d 1e846aab 49fab0ad 26d2ce6a 22219d47 0bce7d77 7d4a21fb e9c270b5 7f607002 f3cef839 3694cf45 ee3688c1 1a8c56ab 127a3daf q = 9cdbd84c 9f1ac2f3 8d0f80f4 2ab952e7 338bf511 g = 30470ad5 a005fb14 ce2d9dcd 87e38bc7 d1b1c5fa cbaecbe9 5f190aa7 a31d23c4 dbbcbe06 17454440 1a5b2c02 0965d8c2 bd2171d3 66844577 1f74ba08 4d2029d8 3c1c1585 47f3a9f1 a2715be2 3d51ae4d 3e5a1f6a 7064f316 933a346d 3f529252 1024-bit key parametersSEED = 8d515589 4229d5e6 89ee01e6 018a237e 2cae64cd counter = 92 p = fd7f5381 1d751229 52df4a9c 2eece4e7 f611b752 3cef4400 c31e3f80 b6512669 455d4022 51fb593d 8d58fabf c5f5ba30 f6cb9b55 6cd7813b 801d346f f26660b7 6b9950a5 a49f9fe8 047b1022 c24fbba9 d7feb7c6 1bf83b57 e7c6a8a6 150f04fb 83f6d3c5 1ec30235 54135a16 9132f675 f3ae2b61 d72aeff2 2203199d d14801c7 q = 9760508f 15230bcc b292b982 a2eb840b f0581cf5 g = f7e1a085 d69b3dde cbbcab5c 36b857b9 7994afbb fa3aea82 f9574c0b 3d078267 5159578e bad4594f e6710710 8180b449 167123e8 4c281613 b7cf0932 8cc8a6e1 3c167a8b 547c8d28 e0a3ae1e 2bb3a675 916ea37f 0bfa2135 62f1fb62 7a01243b cca4f1be a8519089 a883dfe1 5ae59f06 928b665e 807b5525 64014c3b fecf492a |
Field | Description | |
---|---|---|
Names | RSA | |
Type | KeyPairGenerator |
|
Description | This algorithm is the key pair generation algorithm described in PKCS #1. | |
Strength | Any integer that is a multiple of 8, greater than or equal to 512. |
Field | Description | |
---|---|---|
Names | DSA | |
Type | ParameterGenerator |
|
Description | This algorithm is the parameter generation algorithm described in NIST FIPS 186 for DSA. | |
Strength | The length, in bits, of the modulus p .
This must range from 512 to 1024, and must be a multiple of 64. The
default size is 1024. |
This section defines the security algorithm requirements for Java SE 7 implementations. These requirements are intended to improve the interoperability of Java SE 7 implementations and applications that use these algorithms.
Note that the requirements in this section are not a measure of the strength or security of the algorithm. For example, recent advances in cryptanalysis have found weaknesses in the strength of the MD5 MessageDigest algorithm. It is your responsibility to determine whether the algorithm meets the security requirements of your application.
Every implementation of the Java SE 7 platform must support the specified algorithms in the table that follows. These requirements do not apply to 3rd party providers. Consult the release documentation for your implementation to see if any other algorithms are supported.
Class | Algorithm Name(s) |
---|---|
AlgorithmParameterGenerator Implementations must support the key sizes in parentheses. |
DiffieHellman (1024) DSA (1024) |
AlgorithmParameters |
AES DES DESede DiffieHellman DSA |
CertificateFactory |
X.509 |
CertPath Encodings |
PKCS7 PkiPath |
CertPathBuilder |
PKIX |
CertPathValidator |
PKIX |
CertStore |
Collection |
Cipher The algorithms are specified as transformations. Implementations must support the key sizes in parentheses. |
AES/CBC/NoPadding (128) AES/CBC/PKCS5Padding (128) AES/ECB/NoPadding (128) AES/ECB/PKCS5Padding (128) DES/CBC/NoPadding (56) DES/CBC/PKCS5Padding (56) DES/ECB/NoPadding (56) DES/ECB/PKCS5Padding (56) DESede/CBC/NoPadding (168) DESede/CBC/PKCS5Padding (168) DESede/ECB/NoPadding (168) DESede/ECB/PKCS5Padding (168) RSA/ECB/PKCS1Padding (1024, 2048) RSA/ECB/OAEPWithSHA-1AndMGF1Padding (1024, 2048) RSA/ECB/OAEPWithSHA-256AndMGF1Padding (1024, 2048) |
Configuration [1] |
|
KeyAgreement |
DiffieHellman |
KeyFactory |
DiffieHellman DSA RSA |
KeyGenerator Implementations must support the key sizes in parentheses. |
AES (128) DES (56) DESede (168) HmacSHA1 HmacSHA256 |
KeyPairGenerator Implementations must support the key sizes in parentheses. |
DiffieHellman (1024) DSA (1024) RSA (1024, 2048) |
KeyStore |
PKCS12 |
Mac |
HmacMD5 HmacSHA1 HmacSHA256 |
MessageDigest |
MD5 SHA-1 SHA-256 |
Policy [1] |
|
SecretKeyFactory |
DES DESede |
SecureRandom [1] |
|
Signature |
SHA1withDSA SHA1withRSA SHA256withRSA |
SSLContext |
TLSv1 [2] |
[1] No specific Configuration
type, Policy
type or SecureRandom
algorithm is required; however, an implementation-specific default
must be provided.
[2] A TLSv1 implementation must support the cipher suite SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA as defined in RFC 2246 and the special signaling cipher suite TLS_EMPTY_RENEGOTIATION_INFO_SCSV for safe renegotiation as defined in RFC 5746.
Every implementation of the Java SE 7 platform must support the specified XML Signature algorithms in the table that follows. These requirements do not apply to 3rd party providers. Consult the release documentation for your implementation to see if any other algorithms are supported.
Class | Algorithm Name(s) |
---|---|
TransformService |
http://www.w3.org/2001/10/xml-exc-c14n#
(CanonicalizationMethod.EXCLUSIVE )http://www.w3.org/TR/2001/REC-xml-c14n-20010315 ( CanonicalizationMethod.INCLUSIVE )http://www.w3.org/2000/09/xmldsig#base64 ( Transform.BASE64 )http://www.w3.org/2000/09/xmldsig#enveloped-signature ( Transform.ENVELOPED ) |
XMLSignatureFactory |
DOM |