4 Datetime Data Types and Time Zone Support

This chapter includes the following topics:

4.1 Overview of Datetime and Interval Data Types and Time Zone Support

Businesses conduct transactions across different time zones. Oracle Database datetime and interval data types and time zone support make it possible to store consistent information about the time of events and transactions.

Note:

This chapter describes Oracle Database datetime and interval data types. It does not attempt to describe ANSI data types or other kinds of data types unless noted.

4.2 Datetime and Interval Data Types

The datetime data types are DATE, TIMESTAMP, TIMESTAMP WITH TIME ZONE, and TIMESTAMP WITH LOCAL TIME ZONE. Values of datetime data types are sometimes called datetimes.

The interval data types are INTERVAL YEAR TO MONTH and INTERVAL DAY TO SECOND. Values of interval data types are sometimes called intervals.

Both datetimes and intervals are made up of fields. The values of these fields determine the value of the data type. The fields that apply to all Oracle Database datetime and interval data types are:

  • YEAR

  • MONTH

  • DAY

  • HOUR

  • MINUTE

  • SECOND

TIMESTAMP WITH TIME ZONE also includes these fields:

  • TIMEZONE_HOUR

  • TIMEZONE_MINUTE

  • TIMEZONE_REGION

  • TIMEZONE_ABBR

TIMESTAMP WITH LOCAL TIME ZONE does not store time zone information internally, but you can see local time zone information in SQL output if the TZH:TZM or TZR TZD format elements are specified.

The following sections describe the datetime data types and interval data types in more detail:

4.2.1 Datetime Data Types

This section includes the following topics:

4.2.1.1 DATE Data Type

The DATE data type stores date and time information. Although date and time information can be represented in both character and number data types, the DATE data type has special associated properties. For each DATE value, Oracle Database stores the following information: century, year, month, date, hour, minute, and second.

You can specify a date value by:

  • Specifying the date value as a literal

  • Converting a character or numeric value to a date value with the TO_DATE function

A date can be specified as an ANSI date literal or as an Oracle Database date value.

An ANSI date literal contains no time portion and must be specified in exactly the following format:

DATE 'YYYY-MM-DD'

The following is an example of an ANSI date literal:

DATE '1998-12-25'

Alternatively, you can specify an Oracle Database date value as shown in the following example:

TO_DATE('1998-DEC-25 17:30','YYYY-MON-DD HH24:MI','NLS_DATE_LANGUAGE=AMERICAN')

The default date format for an Oracle Database date value is derived from the NLS_DATE_FORMAT and NLS_DATE_LANGUAGE initialization parameters. The date format in the example includes a two-digit number for the day of the month, an abbreviation of the month name, the four digits of the year, and a 24-hour time designation. The specification for NLS_DATE_LANGUAGE is included because 'DEC' is not a valid value for MON in all locales.

Oracle Database automatically converts character values that are in the default date format into date values when they are used in date expressions.

If you specify a date value without a time component, then the default time is midnight. If you specify a date value without a date, then the default date is the first day of the current month.

Oracle Database DATE columns always contain fields for both date and time. If your queries use a date format without a time portion, then you must ensure that the time fields in the DATE column are set to midnight. You can use the TRUNC (date) SQL function to ensure that the time fields are set to midnight, or you can make the query a test of greater than or less than (<, <=, >=, or >) instead of equality or inequality (= or !=). Otherwise, Oracle Database may not return the query results you expect.

See Also:

4.2.1.2 TIMESTAMP Data Type

The TIMESTAMP data type is an extension of the DATE data type. It stores year, month, day, hour, minute, and second values. It also stores fractional seconds, which are not stored by the DATE data type.

Specify the TIMESTAMP data type as follows:

TIMESTAMP [(fractional_seconds_precision)]

fractional_seconds_precision is optional and specifies the number of digits in the fractional part of the SECOND datetime field. It can be a number in the range 0 to 9. The default is 6.

For example, '26-JUN-02 09:39:16.78' shows 16.78 seconds. The fractional seconds precision is 2 because there are 2 digits in '78'.

You can specify the TIMESTAMP literal in a format like the following:

TIMESTAMP 'YYYY-MM-DD HH24:MI:SS.FF'

Using the example format, specify TIMESTAMP as a literal as follows:

TIMESTAMP '1997-01-31 09:26:50.12'

The value of NLS_TIMESTAMP_FORMAT initialization parameter determines the timestamp format when a character string is converted to the TIMESTAMP data type. NLS_DATE_LANGUAGE determines the language used for character data such as MON.

See Also:

4.2.1.3 TIMESTAMP WITH TIME ZONE Data Type

TIMESTAMP WITH TIME ZONE is a variant of TIMESTAMP that includes a time zone region name or time zone offset in its value. The time zone offset is the difference (in hours and minutes) between local time and UTC (Coordinated Universal Time, formerly Greenwich Mean Time). Specify the TIMESTAMP WITH TIME ZONE data type as follows:

TIMESTAMP [(fractional_seconds_precision)] WITH TIME ZONE

fractional_seconds_precision is optional and specifies the number of digits in the fractional part of the SECOND datetime field.

You can specify TIMESTAMP WITH TIME ZONE as a literal as follows:

TIMESTAMP '1997-01-31 09:26:56.66 +02:00'

Two TIMESTAMP WITH TIME ZONE values are considered identical if they represent the same instant in UTC, regardless of the TIME ZONE offsets stored in the data. For example, the following expressions have the same value:

TIMESTAMP '1999-01-15 8:00:00 -8:00'
TIMESTAMP '1999-01-15 11:00:00 -5:00'

You can replace the UTC offset with the TZR (time zone region) format element. The following expression specifies America/Los_Angeles for the time zone region:

TIMESTAMP '1999-01-15 8:00:00 America/Los_Angeles'

To eliminate the ambiguity of boundary cases when the time switches from Standard Time to Daylight Saving Time, use both the TZR format element and the corresponding TZD format element. The TZD format element is an abbreviation of the time zone region with Daylight Saving Time information included. Examples are PST for U. S. Pacific Standard Time and PDT for U. S. Pacific Daylight Time. The following specification ensures that a Daylight Saving Time value is returned:

TIMESTAMP '1999-10-29 01:30:00 America/Los_Angeles PDT'

If you do not add the TZD format element, and the datetime value is ambiguous, then Oracle Database returns an error if you have the ERROR_ON_OVERLAP_TIME session parameter set to TRUE. If ERROR_ON_OVERLAP_TIME is set to FALSE (the default value), then Oracle Database interprets the ambiguous datetime as Standard Time.

The default date format for the TIMESTAMP WITH TIME ZONE data type is determined by the value of the NLS_TIMESTAMP_TZ_FORMAT initialization parameter.

See Also:

4.2.1.4 TIMESTAMP WITH LOCAL TIME ZONE Data Type

TIMESTAMP WITH LOCAL TIME ZONE is another variant of TIMESTAMP. It differs from TIMESTAMP WITH TIME ZONE as follows: data stored in the database is normalized to the database time zone, and the time zone offset is not stored as part of the column data. When users retrieve the data, Oracle Database returns it in the users' local session time zone. The time zone offset is the difference (in hours and minutes) between local time and UTC (Coordinated Universal Time, formerly Greenwich Mean Time).

Specify the TIMESTAMP WITH LOCAL TIME ZONE data type as follows:

TIMESTAMP [(fractional_seconds_precision)] WITH LOCAL TIME ZONE

fractional_seconds_precision is optional and specifies the number of digits in the fractional part of the SECOND datetime field.

There is no literal for TIMESTAMP WITH LOCAL TIME ZONE, but TIMESTAMP literals and TIMESTAMP WITH TIME ZONE literals can be inserted into a TIMESTAMP WITH LOCAL TIME ZONE column.

The default date format for TIMESTAMP WITH LOCAL TIME ZONE is determined by the value of the NLS_TIMESTAMP_FORMAT initialization parameter.

See Also:

4.2.1.5 Inserting Values into Datetime Data Types

You can insert values into a datetime column in the following ways:

  • Insert a character string whose format is based on the appropriate NLS format value

  • Insert a literal

  • Insert a literal for which implicit conversion is performed

  • Use the TO_TIMESTAMP, TO_TIMESTAMP_TZ, or TO_DATE SQL function

The following examples show how to insert data into datetime data types.

See Also:

"Datetime SQL Functions" for more information about the TO_TIMESTAMP or TO_TIMESTAMP_TZ SQL functions

Example 4-1 Inserting Data into a DATE Column

Set the date format.

SQL> ALTER SESSION SET NLS_DATE_FORMAT='DD-MON-YYYY HH24:MI:SS';

Create a table table_dt with columns c_id and c_dt. The c_id column is of NUMBER data type and helps to identify the method by which the data is entered. The c_dt column is of DATE data type.

SQL> CREATE TABLE table_dt (c_id NUMBER, c_dt DATE);

Insert a date as a character string.

SQL> INSERT INTO table_dt VALUES(1, '01-JAN-2003');

Insert the same date as a DATE literal.

SQL> INSERT INTO table_dt VALUES(2, DATE '2003-01-01');

Insert the date as a TIMESTAMP literal. Oracle Database drops the time zone information.

SQL> INSERT INTO table_dt VALUES(3, TIMESTAMP '2003-01-01 00:00:00 America/Los_Angeles');

Insert the date with the TO_DATE function.

SQL> INSERT INTO table_dt VALUES(4, TO_DATE('01-JAN-2003', 'DD-MON-YYYY'));

Display the data.

SQL> SELECT * FROM table_dt;

C_ID       C_DT
---------- --------------------
1          01-JAN-2003 00:00:00
2          01-JAN-2003 00:00:00
3          01-JAN-2003 00:00:00
4          01-JAN-2003 00:00:00

Example 4-2 Inserting Data into a TIMESTAMP Column

Set the timestamp format.

SQL> ALTER SESSION SET NLS_TIMESTAMP_FORMAT='DD-MON-YY HH:MI:SSXFF';

Create a table table_ts with columns c_id and c_ts. The c_id column is of NUMBER data type and helps to identify the method by which the data is entered. The c_ts column is of TIMESTAMP data type.

SQL> CREATE TABLE table_ts(c_id NUMBER, c_ts TIMESTAMP);

Insert a date and time as a character string.

SQL> INSERT INTO table_ts VALUES(1, '01-JAN-2003 2:00:00');

Insert the same date and time as a TIMESTAMP literal.

SQL> INSERT INTO table_ts VALUES(2, TIMESTAMP '2003-01-01 2:00:00');

Insert the same date and time as a TIMESTAMP WITH TIME ZONE literal. Oracle Database converts it to a TIMESTAMP value, which means that the time zone information is dropped.

SQL> INSERT INTO table_ts VALUES(3, TIMESTAMP '2003-01-01 2:00:00 -08:00');

Display the data.

SQL> SELECT * FROM table_ts;

C_ID        C_TS
----------  -----------------------------
1           01-JAN-03 02:00:00.000000 AM
2           01-JAN-03 02:00:00.000000 AM
3           01-JAN-03 02:00:00.000000 AM

Note that the three methods result in the same value being stored.

Example 4-3 Inserting Data into the TIMESTAMP WITH TIME ZONE Data Type

Set the timestamp format.

SQL> ALTER SESSION SET NLS_TIMESTAMP_TZ_FORMAT='DD-MON-RR HH:MI:SSXFF AM TZR';

Set the time zone to '-07:00'.

SQL> ALTER SESSION SET TIME_ZONE='-7:00';

Create a table table_tstz with columns c_id and c_tstz. The c_id column is of NUMBER data type and helps to identify the method by which the data is entered. The c_tstz column is of TIMESTAMP WITH TIME ZONE data type.

SQL> CREATE TABLE table_tstz (c_id NUMBER, c_tstz TIMESTAMP WITH TIME ZONE);

Insert a date and time as a character string.

SQL> INSERT INTO table_tstz VALUES(1, '01-JAN-2003 2:00:00 AM -07:00');

Insert the same date and time as a TIMESTAMP literal. Oracle Database converts it to a TIMESTAMP WITH TIME ZONE literal, which means that the session time zone is appended to the TIMESTAMP value.

SQL> INSERT INTO table_tstz VALUES(2, TIMESTAMP '2003-01-01 2:00:00');

Insert the same date and time as a TIMESTAMP WITH TIME ZONE literal.

SQL> INSERT INTO table_tstz VALUES(3, TIMESTAMP '2003-01-01 2:00:00 -8:00');

Display the data.

SQL> SELECT * FROM table_tstz;

C_ID        C_TSTZ
----------  ------------------------------------
1           01-JAN-03 02:00.00:000000 AM -07:00
2           01-JAN-03 02:00:00.000000 AM -07:00
3           01-JAN-03 02:00:00.000000 AM -08:00

Note that the time zone is different for method 3, because the time zone information was specified as part of the TIMESTAMP WITH TIME ZONE literal.

Example 4-4 Inserting Data into the TIMESTAMP WITH LOCAL TIME ZONE Data Type

Consider data that is being entered in Denver, Colorado, U.S.A., whose time zone is UTC-7.

SQL> ALTER SESSION SET TIME_ZONE='-07:00';

Create a table table_tsltz with columns c_id and c_tsltz. The c_id column is of NUMBER data type and helps to identify the method by which the data is entered. The c_tsltz column is of TIMESTAMP WITH LOCAL TIME ZONE data type.

SQL> CREATE TABLE table_tsltz (c_id NUMBER, c_tsltz TIMESTAMP WITH LOCAL TIME ZONE);

Insert a date and time as a character string.

SQL> INSERT INTO table_tsltz VALUES(1, '01-JAN-2003 2:00:00');

Insert the same data as a TIMESTAMP WITH LOCAL TIME ZONE literal.

SQL> INSERT INTO table_tsltz VALUES(2, TIMESTAMP '2003-01-01 2:00:00');

Insert the same data as a TIMESTAMP WITH TIME ZONE literal. Oracle Database converts the data to a TIMESTAMP WITH LOCAL TIME ZONE value. This means the time zone that is entered (-08:00) is converted to the session time zone value (-07:00).

SQL> INSERT INTO table_tsltz VALUES(3, TIMESTAMP '2003-01-01 2:00:00 -08:00');

Display the data.

SQL> SELECT * FROM table_tsltz;

C_ID        C_TSLTZ
----------  ------------------------------------
1           01-JAN-03 02.00.00.000000 AM
2           01-JAN-03 02.00.00.000000 AM
3           01-JAN-03 03.00.00.000000 AM

Note that the information that was entered as UTC-8 has been changed to the local time zone, changing the hour from 2 to 3.

4.2.1.6 Choosing a TIMESTAMP Data Type

Use the TIMESTAMP data type when you need a datetime value to record the time of an event without the time zone. For example, you can store information about the times when workers punch a time card in and out of their assembly line workstations. Because this is always a local time it is then not needed to store the timezone part. The TIMESTAMP data type uses 7 or 11 bytes of storage.

Use the TIMESTAMP WITH TIME ZONE data type when the datetime value represents a future local time or the time zone information must be recorded with the value. Consider a scheduled appointment in a local time. The future local time may need to be adjusted if the time zone definition, such as daylight saving rule, changes. Otherwise, the value can become incorrect. This data type is most immune to such impact.

The TIMESTAMP WITH TIME ZONE data type requires 13 bytes of storage, or two more bytes of storage than the TIMESTAMP and TIMESTAMP WITH LOCAL TIME ZONE data types because it stores time zone information. The time zone is stored as a time zone region name or as an offset from UTC. The data is available for display or calculations without additional processing. A TIMESTAMP WITH TIME ZONE column cannot be used as a primary key. If an index is created on a TIMESTAMP WITH TIME ZONE column, it becomes a function-based index.

The TIMESTAMP WITH LOCAL TIME ZONE data type stores the timestamp without time zone information. It normalizes the data to the database time zone every time the data is sent to and from a client. It requires 11 bytes of storage.

The TIMESTAMP WITH LOCAL TIME ZONE data type is appropriate when the original time zone is of no interest, but the relative times of events are important and daylight saving adjustment does not have to be accurate. The time zone conversion that this data type performs to and from the database time zone is asymmetrical, due to the daylight saving adjustment. Because this data type does not preserve the time zone information, it does not distinguish values near the adjustment in fall, whether they are daylight saving time or standard time. This confusion between distinct instants can cause an application to behave unexpectedly, especially if the adjustment takes place during the normal working hours of a user.

Note that some regions, such as Brazil and Israel, that update their Daylight Saving Transition dates frequently and at irregular periods, are particularly susceptible to time zone adjustment issues. If time information from these regions is key to your application, you may want to consider using one of the other datetime types.

4.2.2 Interval Data Types

Interval data types store time durations. They are used primarily with analytic functions. For example, you can use them to calculate a moving average of stock prices. You must use interval data types to determine the values that correspond to a particular percentile. You can also use interval data types to update historical tables.

This section includes the following topics:

4.2.2.1 INTERVAL YEAR TO MONTH Data Type

INTERVAL YEAR TO MONTH stores a period of time using the YEAR and MONTH datetime fields. Specify INTERVAL YEAR TO MONTH as follows:

INTERVAL YEAR [(year_precision)] TO MONTH

year_precision is the number of digits in the YEAR datetime field. Accepted values are 0 to 9. The default value of year_precision is 2.

Interval values can be specified as literals. There are many ways to specify interval literals. The following is one example of specifying an interval of 123 years and 2 months. The year precision is 3.

INTERVAL '123-2' YEAR(3) TO MONTH

See Also:

Oracle Database SQL Language Reference for more information about specifying interval literals with the INTERVAL YEAR TO MONTH data type

4.2.2.2 INTERVAL DAY TO SECOND Data Type

INTERVAL DAY TO SECOND stores a period of time in terms of days, hours, minutes, and seconds. Specify this data type as follows:

INTERVAL DAY [(day_precision)] TO SECOND [(fractional_seconds_precision)]

day_precision is the number of digits in the DAY datetime field. Accepted values are 0 to 9. The default is 2.

fractional_seconds_precision is the number of digits in the fractional part of the SECOND datetime field. Accepted values are 0 to 9. The default is 6.

The following is one example of specifying an interval of 4 days, 5 hours, 12 minutes, 10 seconds, and 222 thousandths of a second. The fractional second precision is 3.

INTERVAL '4 5:12:10.222' DAY TO SECOND(3)

Interval values can be specified as literals. There are many ways to specify interval literals.

See Also:

Oracle Database SQL Language Reference for more information about specifying interval literals with the INTERVAL DAY TO SECOND data type

4.2.2.3 Inserting Values into Interval Data Types

You can insert values into an interval column in the following ways:

  • Insert an interval as a literal. For example:

    INSERT INTO table1 VALUES (INTERVAL '4-2' YEAR TO MONTH);
    

    This statement inserts an interval of 4 years and 2 months.

    Oracle Database recognizes literals for other ANSI interval types and converts the values to Oracle Database interval values.

  • Use the NUMTODSINTERVAL, NUMTOYMINTERVAL, TO_DSINTERVAL, and TO_YMINTERVAL SQL functions.

4.3 Datetime and Interval Arithmetic and Comparisons

This section includes the following topics:

4.3.1 Datetime and Interval Arithmetic

You can perform arithmetic operations on date (DATE), timestamp (TIMESTAMP, TIMESTAMP WITH TIME ZONE, and TIMESTAMP WITH LOCAL TIME ZONE) and interval (INTERVAL DAY TO SECOND and INTERVAL YEAR TO MONTH) data. You can maintain the most precision in arithmetic operations by using a timestamp data type with an interval data type.

You can use NUMBER constants in arithmetic operations on date and timestamp values. Oracle Database internally converts timestamp values to date values before doing arithmetic operations on them with NUMBER constants. This means that information about fractional seconds is lost during operations that include both date and timestamp values. Oracle Database interprets NUMBER constants in datetime and interval expressions as number of days.

Each DATE value contains a time component. The result of many date operations includes a fraction. This fraction means a portion of one day. For example, 1.5 days is 36 hours. These fractions are also returned by Oracle Database built-in SQL functions for common operations on DATE data. For example, the built-in MONTHS_BETWEEN SQL function returns the number of months between two dates. The fractional portion of the result represents that portion of a 31-day month.

Oracle Database performs all timestamp arithmetic in UTC time. For TIMESTAMP WITH LOCAL TIME ZONE data, Oracle Database converts the datetime value from the database time zone to UTC and converts back to the database time zone after performing the arithmetic. For TIMESTAMP WITH TIME ZONE data, the datetime value is always in UTC, so no conversion is necessary.

See Also:

4.3.2 Datetime Comparisons

When you compare date and timestamp values, Oracle Database converts the data to the more precise data type before doing the comparison. For example, if you compare data of TIMESTAMP WITH TIME ZONE data type with data of TIMESTAMP data type, Oracle Database converts the TIMESTAMP data to TIMESTAMP WITH TIME ZONE, using the session time zone.

The order of precedence for converting date and timestamp data is as follows:

  1. DATE

  2. TIMESTAMP

  3. TIMESTAMP WITH LOCAL TIME ZONE

  4. TIMESTAMP WITH TIME ZONE

For any pair of data types, Oracle Database converts the data type that has a smaller number in the preceding list to the data type with the larger number.

4.3.3 Explicit Conversion of Datetime Data Types

If you want to do explicit conversion of datetime data types, use the CAST SQL function. You can explicitly convert DATE, TIMESTAMP, TIMESTAMP WITH TIME ZONE, and TIMESTAMP WITH LOCAL TIME ZONE to another data type in the list.

4.4 Datetime SQL Functions

Datetime functions operate on date (DATE), timestamp (TIMESTAMP, TIMESTAMP WITH TIME ZONE, and TIMESTAMP WITH LOCAL TIME ZONE) and interval (INTERVAL DAY TO SECOND, INTERVAL YEAR TO MONTH) values.

Some of the datetime functions were designed for the Oracle Database DATE data type. If you provide a timestamp value as their argument, then Oracle Database internally converts the input type to a DATE value. Oracle Database does not perform internal conversion for the ROUND and TRUNC functions.

The following table shows the datetime functions that were designed for the Oracle Database DATE data type.

Table 4-1 Datetime Functions Designed for the DATE Data Type

Function Description

ADD_MONTHS

Returns the date d plus n months

LAST_DAY

Returns the last day of the month that contains date

MONTHS_BETWEEN

Returns the number of months between date1 and date2

NEW_TIME

Returns the date and time in zone2 time zone when the date and time in zone1 time zone are date

Note: This function takes as input only a limited number of time zones. You can have access to a much greater number of time zones by combining the FROM_TZ function and the datetime expression.

NEXT_DAY

Returns the date of the first weekday named by char that is later than date

ROUND(date)

Returns date rounded to the unit specified by the fmt format model

TRUNC(date)

Returns date with the time portion of the day truncated to the unit specified by the fmt format model

The following table describes additional datetime functions.

Table 4-2 Additional Datetime Functions

Datetime Function Description

CURRENT_DATE

Returns the current date in the session time zone in a value in the Gregorian calendar, of the DATE data type

CURRENT_TIMESTAMP

Returns the current date and time in the session time zone as a TIMESTAMP WITH TIME ZONE value

DBTIMEZONE

Returns the value of the database time zone. The value is a time zone offset or a time zone region name

EXTRACT (datetime)

Extracts and returns the value of a specified datetime field from a datetime or interval value expression

FROM_TZ

Converts a TIMESTAMP value at a time zone to a TIMESTAMP WITH TIME ZONE value

LOCALTIMESTAMP

Returns the current date and time in the session time zone in a value of the TIMESTAMP data type

NUMTODSINTERVAL

Converts number n to an INTERVAL DAY TO SECOND literal

NUMTOYMINTERVAL

Converts number n to an INTERVAL YEAR TO MONTH literal

SESSIONTIMEZONE

Returns the value of the current session's time zone

SYS_EXTRACT_UTC

Extracts the UTC from a datetime with time zone offset

SYSDATE

Returns the date and time of the operating system on which the database resides, taking into account the time zone of the database server's operating system that was in effect when the database was started

SYSTIMESTAMP

Returns the system date, including fractional seconds and time zone of the system on which the database resides

TO_CHAR (datetime)

Converts a datetime or interval value of DATE, TIMESTAMP, TIMESTAMP WITH TIME ZONE, or TIMESTAMP WITH LOCAL TIME ZONE data type to a value of VARCHAR2 data type in the format specified by the fmt date format

TO_DSINTERVAL

Converts a character string of CHAR, VARCHAR2, NCHAR, or NVARCHAR2 data type to a value of INTERVAL DAY TO SECOND data type

TO_NCHAR (datetime)

Converts a datetime or interval value of DATE, TIMESTAMP, TIMESTAMP WITH TIME ZONE, TIMESTAMP WITH LOCAL TIME ZONE, INTERVAL MONTH TO YEAR, or INTERVAL DAY TO SECOND data type from the database character set to the national character set

TO_TIMESTAMP

Converts a character string of CHAR, VARCHAR2, NCHAR, or NVARCHAR2 data type to a value of TIMESTAMP data type

TO_TIMESTAMP_TZ

Converts a character string of CHAR, VARCHAR2, NCHAR, or NVARCHAR2 data type to a value of the TIMESTAMP WITH TIME ZONE data type

TO_YMINTERVAL

Converts a character string of CHAR, VARCHAR2, NCHAR, or NVARCHAR2 data type to a value of the INTERVAL YEAR TO MONTH data type

TZ_OFFSET

Returns the time zone offset that corresponds to the entered value, based on the date that the statement is executed

The following table describes the functions related to the Daylight Saving Time (DST) upgrade process.

Table 4-3 Time Zone Conversion Functions

Time Zone Function Description

ORA_DST_AFFECTED

Enables you to verify whether the data in a column is affected by upgrading the DST rules from one version to another version

ORA_DST_CONVERT

Enables you to upgrade your TSTZ column data from one version to another

ORA_DST_ERROR

Enables you to verify that there are no errors when upgrading a datetime value

See Also:

4.5 Datetime and Time Zone Parameters and Environment Variables

This section includes the following topics:

4.5.1 Datetime Format Parameters

The following table contains the names and descriptions of the datetime format parameters.

Table 4-4 Datetime Format Parameters

Parameter Description

NLS_DATE_FORMAT

Defines the default date format to use with the TO_CHAR and TO_DATE functions

NLS_TIMESTAMP_FORMAT

Defines the default timestamp format to use with the TO_CHAR and TO_TIMESTAMP functions

NLS_TIMESTAMP_TZ_FORMAT

Defines the default timestamp with time zone format to use with the TO_CHAR and TO_TIMESTAMP_TZ functions

Their default values are derived from NLS_TERRITORY.

You can specify their values by setting them in the initialization parameter file. If you change the values in the initialization parameter file, you must restart the instance for the change to take effect. You can also specify their values for a client as client environment variables. For Java clients, the value of NLS_TERRITORY is derived from the default locale of JRE. The values specified in the initialization parameter file are not used for JDBC sessions.

To change their values during a session, use the ALTER SESSION statement.

See Also:

4.5.2 Time Zone Environment Variables

The time zone environment variables are:

  • ORA_TZFILE, which enables you to specify a time zone on the client and Oracle Database server. Note that when you specify ORA_TZFILE on Oracle Database server, the only time when this environment variable takes effect is during the creation of the database.

  • ORA_SDTZ, which specifies the default session time zone.

4.5.3 Daylight Saving Time Session Parameter

ERROR_ON_OVERLAP_TIME is a session parameter that determines how Oracle Database handles an ambiguous datetime boundary value. Ambiguous datetime values can occur when the time changes between Daylight Saving Time and standard time.

The possible values are TRUE and FALSE. When ERROR_ON_OVERLAP_TIME is TRUE, then an error is returned when Oracle Database encounters an ambiguous datetime value. When ERROR_ON_OVERLAP_TIME is FALSE, then ambiguous datetime values are assumed to be the standard time representation for the region. The default value is FALSE.

4.5.4 Daylight Saving Time Upgrade Parameter

DST_UPGRADE_INSERT_CONV is an initialization parameter that is only used during the upgrade window of the Daylight Saving Time (DST) upgrade process. It is only applicable to tables with TIMESTAMP WITH TIME ZONE columns because those are the only ones that are modified during the DST upgrade.

During the upgrade window of the DST patching process (which is described in the DBMS_DST package), tables with TIMESTAMP WITH TIMEZONE data undergo conversion to the new time zone version. Columns in tables that have not yet been converted will still have the TIMESTAMP WITH TIMEZONE reflecting the previous time zone version. In order to present the data in these columns as though they had been converted to the new time zone version when you issue SELECT statements, Oracle adds by default conversion operators over the columns to convert them to the new version. Adding the conversion operator may, however, slow down queries and disable usage of indexes on the TIMESTAMP WITH TIMEZONE columns. Hence, Oracle provides a parameter, DST_UPGRADE_INSERT_CONV, that specifies whether or not internal operators are allocated on top of TIMESTAMP WITH TIMEZONE columns of tables that have not been upgraded. By default, its value is TRUE. If users know that the conversion process will not affect the TIMESTAMP WITH TIMEZONE columns, then this parameter can be set to FALSE.

Oracle strongly recommends that you set this parameter to TRUE throughout the DST patching process. By default, this parameter is set to TRUE. However, if set to TRUE, query performance may be degraded on unconverted tables. Note that this only applies during the upgrade window.

4.6 Choosing a Time Zone File

The Oracle Database time zone files contain the valid time zone names. The following information is also included for each time zone:

  • Offset from Coordinated Universal Time (UTC)

  • Transition times for Daylight Saving Time

  • Abbreviations for standard time and Daylight Saving Time

Oracle Database supplies multiple versions of time zone files, and there are two types of file associated with each version: a large file, which contains all the time zones defined in the database, and a small file, which contains only the most commonly used time zones. The large version files are named as timezlrg_version_number.dat and the small version files are named as timezone_version_number.dat, where version_number is the version number of the time zone file. The time zone files are stored in the $ORACLE_HOME/oracore/zoneinfo directory and the default time zone file is a large time zone file having the highest version number. In Oracle Database 19c, the default time zone file is $ORACLE_HOME/oracore/zoneinfo/timezlrg_32.dat.

Examples of time zone files are:

$ORACLE_HOME/oracore/zoneinfo/timezlrg_4.dat   -- large version 4
$ORACLE_HOME/oracore/zoneinfo/timezone_4.dat   -- small version 4
$ORACLE_HOME/oracore/zoneinfo/timezlrg_5.dat   -- large version 5
$ORACLE_HOME/oracore/zoneinfo/timezone_5.dat   -- small version 5

During the database creation process, you choose the time zone version for the server. This version is fixed, but you can, however, go through the upgrade process to achieve a higher version. You can use different versions of time zone files on the client and server, but Oracle recommends that you do not. This is because there is a performance penalty when a client on one version communicates with a server on a different version. The performance penalty arises because the TIMESTAMP WITH TIME ZONE (TSTZ) data is transferred using a local timestamp instead of UTC.

On the server, Oracle Database always uses a large file. On the client, you can use either a large or a small file. If you use a large time zone file on the client, then you should continue to use it unless you are sure that no information will be missing if you switch to a smaller one. If you use a small file, you have to make sure that the client does not query data that is not present in the small time zone file. Otherwise, you get an error.

You can enable the use of a specific time zone file on the client or on the server. If you want to enable a time zone file on the server, there are two situations. One is when you want to upgrade the time zone to the target version. See "Upgrading the Time Zone File and Timestamp with Time Zone Data" for more information. Another is when you want to create a new database. In this case, you can set the ORA_TZFILE environment variable to point to the time zone file of your choice.

To enable a specific time zone file on a client, you can set ORA_TZFILE to whatever time zone file you want. If ORA_TZFILE is not set, Oracle Database automatically picks up and uses the file with the latest time zone version.

See Also:

Oracle Call Interface Programmer's Guide for more information on how to upgrade Daylight Saving Time on a client

Note:

Oracle Database time zone data is derived from the public domain information available on The IANA Functions website. Oracle Database time zone data may not reflect the most recent data available on this website.

You can obtain a list of time zone names and time zone abbreviations from the time zone file that is installed with your database by entering the following statement:

SELECT TZNAME, TZABBREV 
FROM V$TIMEZONE_NAMES
ORDER BY TZNAME, TZABBREV;

For the default time zone file, this statement results in output similar to the following:

TZNAME               TZABBREV
-------------------- ----------
Africa/Abidjan       GMT
Africa/Abidjan       LMT
...
Africa/Algiers       CEST
Africa/Algiers       CET
Africa/Algiers       LMT
Africa/Algiers       PMT
Africa/Algiers       WET
Africa/Algiers       WEST
...
WET                  LMT
WET                  WEST
WET                  WET

2137 rows selected.

In the above output, 2 time zone abbreviations are associated with the Africa/Abidjan time zone, and 6 abbreviations are associated with the Africa/Algiers time zone. The following table shows some of the time zone abbreviations and their meanings.

Time Zone Abbreviation Meaning

LMT

Local Mean Time

PMT

Paris Mean Time

WET

Western European Time

WEST

Western European Summer Time

CET

Central Europe Time

CEST

Central Europe Summer Time

EET

Eastern Europe Time

EEST

Eastern Europe Summer Time

Note that an abbreviation can be associated with multiple time zones. For example, CET is associated with both Africa/Algiers and Africa/Casablanca, as well as time zones in Europe.

If you want a list of time zones without repeating the time zone name for each abbreviation, use the following query:

SELECT UNIQUE TZNAME
FROM V$TIMEZONE_NAMES;

For example, version 11 contains output similar to the following:

TZNAME
--------------------
Africa/Addis_Ababa
Africa/Bissau
Africa/Ceuta
...
Turkey
US/East-Indiana
US/Samoa

The default time zone file, that is, the large time zone file contains more than 350 unique time zone names. The small time zone file contains more than 180 unique time zone names.

See Also:

  • "Time Zone Region Names" for a list of valid Oracle Database time zone names

  • $ORACLE_HOME/oracore/zoneinfo/timezdif.csv provided with your Oracle Database software installation for a full list of time zones changed in each version of the time zone file.

  • Oracle Database Upgrade Guide for upgrade information

4.7 Upgrading the Time Zone File and Timestamp with Time Zone Data

The time zone files that are supplied with the Oracle Database are updated periodically to reflect changes in transition rules for various time zone regions. To find which time zone file your database currently uses, query the V$TIMEZONE_FILE view.

Note:

Each Oracle Database release includes a time zone file that is current at the time of the release and a number of older version files. Between Oracle Database releases, new time zone file versions may be provided in patch sets or individual patches to reflect the changes in transition rules for various time zone regions. Older time zone file versions allow you to run upgraded databases without a need to immediately upgrade the time zone file to the most current version.

Daylight Saving Time (DST) Transition Rules Changes

Governments can and do change the rules for when Daylight Saving Time takes effect or how it is handled. When this occurs, Oracle provides a new set of transition rules for handling timestamp with time zone data.

Transition periods for the beginning or ending of Daylight Saving Time can potentially introduce problems (such as data loss) when handling timestamps with time zone data. Oracle has provided the PL/SQL package DBMS_DST and the utltz_* scripts to deal with this transition.

The changes to DST transition rules may affect existing data of TIMESTAMP WITH TIME ZONE data type, because of the way Oracle Database stores this data internally. When users enter timestamps with time zone, Oracle Database converts the data to UTC, based on the transition rules in the time zone file, and stores the data together with the ID of the original time zone on disk. When data is retrieved, the reverse conversion from UTC takes place. For example, in the past, under version 2 transition rules, the value TIMESTAMP '2007-11-02 12:00:00 America/Los_Angeles' was stored as UTC value '2007-11-02 20:00:00' plus the time zone ID for . The time in Los Angeles was stored as UTC minus eight hours (PST). Under version 3 of the transition rules, the offset for the same day is minus seven hours (PDT). Beginning with year 2007, the DST has been in effect longer (until the first Sunday of November, which is November 4th in 2007). Now, when users retrieve the same timestamp and the new offset is added to the stored UTC time, they receive TIMESTAMP '2007-11-02 13:00:00 America/Los_Angeles'. There is a one hour difference compared to the data previous to version 3 taking effect.

Note:

For any time zone region whose transition rules have been updated, the upgrade process discussed throughout this section affects only timestamps that point to the future relative to the effective date of the corresponding DST rule change. For example, no timestamp before year 2007 is affected by the version 3 change to the 'America/Los_Angeles' time zone region.

Preparing to Upgrade the Time Zone File and Timestamp with Time Zone Data

Before you actually upgrade any data, that is TIMESTAMP WITH TIME ZONE (TSTZ) data in a database, you should verify what the impact of the upgrade is likely to be. In general, you can consider the upgrade process to have two separate sub-processes – prepare and upgrade. To prepare for the upgrade, you start a prepare window, which is the time when you check how much data has to be updated in the database. To upgrade, you start an upgrade window, which is the time when changes to the data actually occur.

While not required, Oracle strongly recommends that you perform the prepare step. In addition to finding out how much data will have to be modified during the upgrade, thus giving you an estimate of how much time the upgrade will take, you will also see any semantic errors that you may encounter.

Methods to Upgrade the Time Zone File and Timestamp with Time Zone Data

You can upgrade the time zone data in your database based on the latest released time zone file using any of the following methods:

The upgrade method that uses the utltz_* scripts is introduced starting with Oracle Database 18c and is easier to implement as compared to the method that uses the DBMS_DST package.

4.7.1 Upgrading the Time Zone Data Using the utltz_* Scripts

This section contains the following topics related to the time zone data upgrade using the utltz_* scripts.

Note:

This upgrade method of using the utltz_* scripts is introduced starting with Oracle Database 18c and is easier to implement as compared to the other upgrade method that uses the DBMS_DST package for upgrading the time zone data in a database.

4.7.1.1 Prepare Window

During the prepare window, you can run any of the following scripts present in the $ORACLE_HOME/rdbms/admin directory to check how much data will need to be updated in the database during the time zone data upgrade:

  • utltz_countstats.sql

    This script shows the optimizer statistics of num_rows of all the tables having TIMESTAMP WITH TIME ZONE (TSTZ) data.

    Note:

    Run the utltz_countstats.sql script only when the database optimizer statistics are up to date, else run the utltz_countstar.sql script. If you run the utltz_countstats.sql script, then you need not run the utltz_countstar.sql script.

  • utltz_countstar.sql

    This script shows the result of the count(*) operation for all the tables having TIMESTAMP WITH TIME ZONE (TSTZ) data.

    Note:

    The utltz_countstar.sql script may take a considerable amount of time to complete its execution.

The DBMS_SCHEDULER table generally contains a large amount of time zone data. In case the data in this table is not needed, then delete it using the following command before you run the upgrade steps. Stop the main jobs before running this command as it may not delete all the data from the DBMS_SCHEDULER table, if some of the main jobs in a chain of jobs are still running.

exec dbms_scheduler.purge_log;

The other tables that may contain a large amount of time zone data are the SYS.WRI$_OPTSTAT_HISTGRM_HISTORY and SYS.WRI$_OPTSTAT_HISTHEAD_HISTORY tables. In case you do not need this data, then you may delete it using the following commands:

-- check the number of rows in the tables
select count(*) from SYS.WRI$_OPTSTAT_HISTGRM_HISTORY;
select count(*) from SYS.WRI$_OPTSTAT_HISTHEAD_HISTORY;

-- check the data retention period of the stats
-- the default value is 31
select systimestamp - dbms_stats.get_stats_history_availability from dual;

-- disable stats retention
exec dbms_stats.alter_stats_history_retention(0);

-- remove all the stats
exec DBMS_STATS.PURGE_STATS(systimestamp);

-- check the result of the purge operation
select count(*) from SYS.WRI$_OPTSTAT_HISTGRM_HISTORY;
select count(*) from SYS.WRI$_OPTSTAT_HISTHEAD_HISTORY;

You may set the data retention period back to its original value using the following command once the time zone data upgrade is completed:

exec dbms_stats.alter_stats_history_retention(31);
4.7.1.2 Upgrade Window

During the upgrade window, you can run the following scripts present in the $ORACLE_HOME/rdbms/admin directory to upgrade the time zone data in the database:

  1. Run the utltz_upg_check.sql script from the $ORACLE_HOME directory:

    spool utltz_upg_check.log
    @utltz_upg_check.sql
    spool off

    The following information is displayed on the screen after successful execution of the script:

    INFO: A newer RDBMS DST version than the one currently used is found.
    INFO: Note that NO DST update was yet done.
    INFO: Now run utltz_upg_apply.sql to do the actual RDBMS DST update.
    INFO: Note that the utltz_upg_apply.sql script will
    INFO: restart the database 2 times WITHOUT any confirmation or prompt.

    The script also writes the following information in the alert.log file:

    utltz_upg_check sucessfully found newer RDBMS DSTv new_time_zone_version and took number_of_minutes minutes to run.

    If the utltz_upg_check.sql script displays the following error, check the previous message displayed on the screen and proceed accordingly.

    ORA-20xxx: Stopping script - see previous message...

  2. Run the utltz_upg_apply.sql script from the $ORACLE_HOME directory after the utltz_upg_check.sql script is executed successfully:

    spool utltz_upg_apply.log
    @utltz_upg_apply.sql
    spool off

    Note:

    The following are the prerequisites for running the utltz_upg_apply.sql script:

    • No application should query or insert time zone data in the database during the time zone upgrade process.

    • In an RAC environment, the RAC database must be started as a single database instance.

    • In a multitenant environment, all the PDBs must be shut down before running the utltz_upg_apply.sql script on the CDB.

    Also, note the following:

    • The utltz_upg_apply.sql script automatically restarts the database multiple times during its execution.

    • The utltz_upg_apply.sql script generally takes less time to execute than the utltz_upg_check.sql script.

    The following information is displayed on the screen after successful execution of the utltz_upg_apply.sql script:

    INFO: The RDBMS DST update is successfully finished.
    INFO: Make sure to exit this sqlplus session.
    INFO: Do not use it for timezone related selects.

    The TZ_VERSION column in the Registry$database table now gets updated with the new time zone version.

    If the script displays the following error message, then check the previous message displayed on the screen and proceed accordingly.

    ORA-20xxx: Stopping script - see previous message...

Note:

If you want to see what is happening when the scripts utltz_upg_check.sql and utltz_upg_apply.sql are being executed, run the following commands:

set PAGES 1000

-- query the V$SESSION_LONGOPS view
select TARGET, TO_CHAR(START_TIME,'HH24:MI:SS - DD-MM-YY'),
       TIME_REMAINING, SOFAR, TOTALWORK, SID, SERIAL#, OPNAME
from V$SESSION_LONGOPS
where sid in
      (select SID from V$SESSION where CLIENT_INFO = 'upg_tzv')
      and
      SOFAR < TOTALWORK
order by START_TIME;

-- query the V$SESSION and V$SQLAREA views
select S.SID, S.SERIAL#, S.SQL_ID, S.PREV_SQL_ID,
       S.EVENT#, S.EVENT, S.P1TEXT, S.P1, S.P2TEXT,
       S.P2, S.P3TEXT, S.P3, S.TIME_REMAINING_MICRO,
       S.SEQ#, S.BLOCKING_SESSION, BS.PROGRAM "Blocking Program",
       Q1.SQL_TEXT "Current SQL", Q2.SQL_TEXT "Previous SQL"
from V$SESSION S, V$SQLAREA Q1, V$SQLAREA Q2, V$SESSION BS
where S.SQL_ID = Q1.SQL_ID(+) and
      S.PREV_SQL_ID = Q2.SQL_ID(+) and
      S.BLOCKING_SESSION = BS.SID(+) and
      S.CLIENT_INFO = 'upg_tzv';

Note:

The following are some points to note related to time zone upgrade in a multitenant environment:

  • Updating the time zone version of a CDB does not change the time zone version of the PDBs.

  • Updating the time zone version of a PDB does not change the time zone version of the other PDBs.

  • A new PDB is always assigned the time zone version of PDB$SEED.

  • PDB$SEED is always assigned the time zone version at the time of CDB creation. The time zone version of PDB$SEED cannot be changed.

4.7.2 Upgrading the Time Zone Data Using the DBMS_DST Package

This section contains the following topics related to the time zone data upgrade using the DBMS_DST package.

4.7.2.1 Prepare Window

During the prepare window, you can get the information about the data that will be affected during the time zone upgrade process using the following steps:

  1. Install the desired version of time zone files to which you will be later migrating into $ORACLE_HOME/oracore/zoneinfo. If the desired version is version_number, then you must add the file timezlrg_version_number.dat. You can add the file timezone_version_number.dat at your discretion later. These files can be found on My Oracle Support. The desired version should be the latest version available, unless the latest version contains relevant DST rule changes that were rolled back by the appropriate government after the version had been released.
  2. You can optionally create the following tables:
    • an error table that contains the errors generated during the upgrade process by using the DBMS_DST.CREATE_ERROR_TABLE procedure. If you do not explicitly create this table, then the default table used is sys.dst$error_table.

    • a table that contains the affected timestamp with time zone information by using the DBMS_DST.CREATE_AFFECTED_TABLE procedure. If you do not explicitly create this table, then the default table used is sys.dst$affected_tables.

    • a trigger table that stores the disabled TSTZ table triggers information by using the DBMS_DST.CREATE_TRIGGER_TABLE procedure. If you do not explicitly create this table, then the default table used is sys.dst$trigger_table. Note that during the upgrade window, Oracle Database first disables the triggers on a TSTZ table and then performs the upgrade of its affected TSTZ data. Oracle Database saves the information about those triggers in the sys.dst$trigger_table table. After completing the upgrade of the affected TSTZ data in the table, the disabled triggers are enabled by reading their information from the sys.dst$trigger_table table and then their information is removed from the sys.dst$trigger_table table. If any fatal error occurs, such as an unexpected instance shutdown during the upgrade window, you should check the sys.dst$trigger_table table to see if any trigger has not been restored to its previous active state before the upgrade.

  3. Execute the procedure DBMS_DST.BEGIN_PREPARE(new_version), where new_version is the time zone file version you chose in Step 1.
  4. Collect information about affected data by executing the procedure DBMS_DST.FIND_AFFECTED_TABLES, optionally passing the names of custom tables created in Step 2 as parameters. Verify the affected columns by querying sys.dst$affected_tables or the corresponding custom table. Also, it is particularly important to check sys.dst$affected_tables.error_count or the corresponding error_count column in the custom table for possible errors. If the error count is greater than 0, you can check what kind of errors you might expect during the upgrade by checking sys.dst$error_table or the corresponding custom error table. See "Upgrade Error Handling".
  5. End the prepare window by executing the procedure DBMS_DST.END_PREPARE.

Note:

  • Only one DBA should run the prepare window at one time. Also, make sure to correct all errors before running the upgrade.

  • You can find the matrix of available patches for updating your time zone files by going to Oracle Support and reading Document ID 412160.1.

See Also:

Oracle Database PL/SQL Packages and Types Reference for more information about DBMS_DST package

4.7.2.2 Upgrade Window

During the upgrade window, you can upgrade the time zone data using the following steps:

  1. If you have not already done so, download the desired version of timezlrg_version_number.dat and install it in $ORACLE_HOME/oracore/zoneinfo. In addition, you can optionally download timezone_version_number.dat from My Oracle Support and put it in the same location.
  2. Shut down the database. In Oracle RAC, you must shut down all instances.
  3. Start up the database in the UPGRADE mode. Note that, in Oracle RAC, only one instance should be started. See Oracle Database Upgrade Guide for more information about the UPGRADE mode.
  4. Execute the procedure DBMS_DST.BEGIN_UPGRADE(new_version). Optionally, you can have two other parameters that you can specify to TRUE, if you do not want to ignore semantic errors during the upgrade of dictionary tables that contain timestamp with time zone data. If you specify TRUE for either or both of these parameters, the errors are populated into sys.dst$error_table. In this case, you might want to truncate the error table before you execute the BEGIN_UPGRADE procedure. See Oracle Database PL/SQL Packages and Types Reference for more information.
  5. If the BEGIN_UPGRADE procedure fails, the error "ORA-56927: Starting an upgrade window failed" is displayed.

    After BEGIN_UPGRADE procedure finishes executing with errors, check sys.dst$error_table to determine if the dictionary conversion was successful. If successful, there will not be any rows in the table. If there are errors, correct those errors manually and rerun the BEGIN_UPGRADE procedure. See "Upgrade Error Handling".

  6. Restart the database in normal mode.
  7. Truncate the error and trigger tables (by default, sys.dst$error_table and sys.dst$trigger_table).
  8. Upgrade the TSTZ data in all tables by executing the procedure DBMS_DST.UPGRADE_DATABASE.
  9. Verify that all tables have been upgraded by querying the DBA_TSTZ_TABLES view, as shown in "Upgrade Example". Then check dst$error_table to see if there are any errors. If there are errors, correct the errors and rerun the DBMS_DST.UPGRADE_TABLE procedure for the relevant tables. Or, if you do not think those errors are important, then rerun the DBMS_DST.UPGRADE_TABLE procedure with the parameters set to ignore errors.
  10. End the upgrade window by executing the procedure DBMS_DST.END_UPGRADE.

Note:

Tables containing timestamp with time zone columns need to be in a state where they can be updated. So, as an example, the columns cannot have validated and disabled check constraints as this prevents updating.

Oracle recommends that you use the parallel option if a table size is greater than 2 Gigabytes. Oracle also recommends that you allow Oracle to handle any semantic errors that may arise.

Note that, when you execute the CREATE statements for error, trigger, or affected tables, you must pass the table name only, not the schema name. This is because the tables are created in the schema from which the CREATE statements are executed.

See Also:

Oracle Database PL/SQL Packages and Types Reference for more information about DBMS_DST package

4.7.2.3 Upgrade Example

This example illustrates updating DST behavior to Oracle Database 11g, release 2 for which the default time zone version is 14. First, assume that your current database is using time zone version 3, and also assume you have an existing table t, which contains timestamp with time zone data.

Connect to the database as the user scott and execute the following statements:

DROP TABLE t;
CREATE TABLE t (c NUMBER, mark VARCHAR(25), ts TIMESTAMP WITH TIME ZONE);
 
INSERT INTO t VALUES(1, 'not_affected', 
                    to_timestamp_tz('22-sep-2006 13:00:00 america/los_angeles',
                                    'dd-mon-yyyy hh24:mi:ss tzr tzd'));
INSERT INTO t VALUES(4, 'affected_err_exist',
                     to_timestamp_tz('11-mar-2007 00:30:00 america/st_johns',
                                     'dd-mon-yyyy hh24:mi:ss tzr tzd'));
INSERT INTO t VALUES(6, 'affected_no_err',
                     to_timestamp_tz('11-mar-2007 01:30:00 america/st_johns',
                                     'dd-mon-yyyy hh24:mi:ss tzr tzd'));
INSERT INTO t VALUES(14, 'affected_err_dup', 
                     to_timestamp_tz('21-sep-2006 23:30:00 egypt',
                                     'dd-mon-yyyy hh24:mi:ss tzr tzd'));
COMMIT;
 

Then, optionally, you can start a prepare window to check the affected data and potential semantic errors where there is an overlap or non-existing time. To do this, you should start a window for preparation to migrate to time zone version 14. It is assumed that you have the necessary privileges. These privileges are controlled with the DBMS_DST package.

See Also:

Oracle Database PL/SQL Packages and Types Reference for more information about the DBMS_DST package

As an example, first, prepare the window.

connect / as sysdba
set serveroutput on
EXEC DBMS_DST.BEGIN_PREPARE(14);
 
A prepare window has been successfully started.
 
PL/SQL procedure successfully completed.
 

Note that the argument 14 causes the time zone version 14 to be used in this statement. After this window is successfully started, you can check the status of the DST in DATABASE_PROPERTIES as shown in the following example:

SELECT property_name, SUBSTR(property_value, 1, 30) value
FROM database_properties
WHERE property_name LIKE 'DST_%'
ORDER BY property_name;

You will see the output similar to the following:

PROPERTY_NAME                  VALUE
---------------------------    ---------
DST_PRIMARY_TT_VERSION         3
DST_SECONDARY_TT_VERSION       14
DST_UPGRADE_STATE              PREPARE

Next, you can execute DBMS_DST.FIND_AFFECTED_TABLES to find all the tables in the database that are affected if you upgrade from version 3 to version 14. This table contains the table owner, table name, column name, row count, and error count. Here, you have the choice of using the defaults for error tables (sys.dst$error_table) and affected tables (sys.dst$affected_table) or you can create your own. In this example, we create our own tables by using DBMS_DST.CREATE_ERROR_TABLE and DBMS_DST.CREATE_AFFECTED_TABLE and then pass to FIND_AFFECTED_TABLES as shown below.

Connect to the database as the user scott and execute the following statements:

EXEC DBMS_DST.CREATE_AFFECTED_TABLE('my_affected_tables');
EXEC DBMS_DST.CREATE_ERROR_TABLE('my_error_table');
 

It is a good idea to make sure that there are no rows in these tables. You can do this by truncating the tables:

TRUNCATE TABLE my_affected_tables;
TRUNCATE TABLE my_error_table;

Then, you can execute FIND_AFFECTED_TABLES to see which tables are impacted during the upgrade:

connect / as sysdba

BEGIN
   DBMS_DST.FIND_AFFECTED_TABLES(affected_tables  => 'scott.my_affected_tables',
                                 log_errors       => TRUE,
                                 log_errors_table => 'scott.my_error_table');
END;
/

Then, check the affected tables:

SELECT * FROM scott.my_affected_tables;
 
TABLE_OWNER   TABLE_NAME   COLUMN_NAM   ROW_COUNT  ERROR_COUNT
-----------   ----------   ----------   ---------  -----------
SCOTT         T            TS                   3            2
 

Then, check the error table:

SELECT * FROM scott.my_error_table;
 
TABLE_OWNER   TABLE_NAME  COLUMN_NAME   ROWID                ERROR_NUMBER
-----------   ----------  -----------   ------------------   ------------
SCOTT         T           TS            AAAPW3AABAAANzoAAB           1878
SCOTT         T           TS            AAAPW3AABAAANzoAAE           1883
 

These errors can be corrected as described in "Upgrade Error Handling". Then, end the prepare window, as in the following statement:

EXEC DBMS_DST.END_PREPARE;
 
A prepare window has been successfully ended.
 
PL/SQL procedure successfully completed.
 

After this, you can check the DST status in DATABASE_PROPERTIES:

SELECT property_name, SUBSTR(property_value, 1, 30) value
FROM database_properties
WHERE property_name LIKE 'DST_%'
ORDER BY property_name;
 
PROPERTY_NAME                 VALUE
------------------------      --------
DST_PRIMARY_TT_VERSION        3
DST_SECONDARY_TT_VERSION      0
DST_UPGRADE_STATE             NONE
 

Next, you can use the upgrade window to upgrade the affected data. To do this, first, start an upgrade window. Note that the database must be opened in UPGRADE mode before you can execute DBMS_DST.BEGIN_UPGRADE. In Oracle RAC, only one instance can be started. BEGIN_UPGRADE upgrades all dictionary tables in one transaction, so the invocation will either succeed or fail as one whole. During the procedure's execution, all user tables with TSTZ data are marked as an upgrade in progress. See Oracle Database Upgrade Guide for more information.

Also, only SYSDBA can start an upgrade window. If you do not open the database in UPGRADE mode and invoke BEGIN_UPGRADE, you will see the following error:

EXEC DBMS_DST.BEGIN_UPGRADE(14);
BEGIN DBMS_DST.BEGIN_UPGRADE(14); END;
 
*
ERROR at line 1:
ORA-56926: database must be in UPGRADE mode in order to start an upgrade window
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 79
ORA-06512: at "SYS.DBMS_DST", line 1021
ORA-06512: at line 1
 

So, BEGIN_UPGRADE upgrades system tables that contain TSTZ data and marks user tables (containing TSTZ data) with the UPGRADE_IN_PROGRESS property. This can be checked in DBA_TSTZ_TABLES, and is illustrated later in this example.

There are two parameters in BEGIN_UPGRADE that are for handling semantic errors: error_on_overlap_time (error number ORA-1883) and error_on_nonexisting_time (error number ORA-1878). If the parameters use the default setting of FALSE, Oracle converts the data using a default conversion and does not signal an error. See "Upgrade Error Handling" for more information regarding what they mean, and how to handle errors.

The following call can automatically correct semantic errors based on some default values when you upgrade the dictionary tables. If you do not ignore semantic errors, and you do have such errors in the dictionary tables, BEGIN_UPGRADE will fail. These semantic errors are populated into sys.dst$error_table.

EXEC DBMS_DST.BEGIN_UPGRADE(14);
An upgrade window has been successfully started.
 
PL/SQL procedure successfully completed.
 

After this, you can check the DST status in DATABASE_PROPERTIES, as in the following:

SELECT property_name, SUBSTR(property_value, 1, 30) value
FROM database_properties
WHERE property_name LIKE 'DST_%'
ORDER BY property_name;
 
PROPERTY_NAME               VALUE
------------------------    --------
DST_PRIMARY_TT_VERSION            14
DST_SECONDARY_TT_VERSION           3
DST_UPGRADE_STATE            UPGRADE
 

Then, check which user tables are marked with UPGRADE_IN_PROGRESS:

SELECT owner, table_name, upgrade_in_progress FROM dba_tstz_tables;
 
OWNER   TABLE_NAME                      UPGRADE_IN_PROGRESS
-----   -------------------------       -------------------
SYS     WRI$_OPTSTAT_AUX_HISTORY        NO
SYS     WRI$_OPTSTAT_OPR                NO
SYS     OPTSTAT_HIST_CONTROL$           NO
SYS     SCHEDULER$_JOB                  NO
SYS     KET$_AUTOTASK_STATUS            NO
SYS     AQ$_ALERT_QT_S                  NO
SYS     AQ$_KUPC$DATAPUMP_QUETAB_S      NO
DBSNMP  MGMT_DB_FEATURE_LOG             NO
WMSYS   WM$VERSIONED_TABLES             NO
SYS     WRI$_OPTSTAT_IND_HISTORY        NO
SYS     OPTSTAT_USER_PREFS$             NO
SYS     FGR$_FILE_GROUP_FILES           NO
SYS     SCHEDULER$_WINDOW               NO
SYS     WRR$_REPLAY_DIVERGENCE          NO
SCOTT   T                               YES
IX      AQ$_ORDERS_QUEUETABLE_S         YES
...
 

In this output, dictionary tables (in the SYS schema) have already been upgraded by BEGIN_UPGRADE. User tables, such as SCOTT.T, have not been and are in progress.

Now you can perform an upgrade of user tables using DBMS_DST.UPGRADE_DATABASE. All tables must be upgraded, otherwise, you will not be able to end the upgrade window using the END_UPGRADE procedure. Before this step, you must restart the database in normal mode. An example of the syntax is as follows:

VAR numfail number;
BEGIN
   DBMS_DST.UPGRADE_DATABASE(:numfail,
            parallel                  => TRUE,
            log_errors                => TRUE,
            log_errors_table          => 'SYS.DST$ERROR_TABLE',
            log_triggers_table        => 'SYS.DST$TRIGGER_TABLE',
            error_on_overlap_time     => TRUE,
            error_on_nonexisting_time => TRUE);

DBMS_OUTPUT.PUT_LINE('Number of tables failed to upgrade:'|| :numfail);
END;
/

If there are any errors, you should correct them and use UPGRADE_TABLE on the individual tables. In that case, you may need to handle tables related to materialized views, such as materialized view base tables, materialized view log tables, and materialized view container tables. There are a couple of considerations to keep in mind when upgrading these tables. First, the base table and its materialized view log table have to be upgraded atomically. Next, the materialized view container table has to be upgraded after all its base tables and the materialized view log tables have been upgraded. In general, Oracle recommends that you handle semantic errors by letting Oracle Database take the default action.

For the sake of this example, let us assume there were some errors in SCOTT.T after you ran UPGRADE_DATABASE. In that case, you can check these errors by using the following query:

SELECT * FROM sys.dst$error_table;
 
TABLE_OWNER   TABLE_NAME  COLUMN_NAME   ROWID                ERROR_NUMBER
-----------   ----------  -----------   ------------------   ------------
SCOTT         T           TS            AAAO2XAABAAANrgAAD           1878
SCOTT         T           TS            AAAO2XAABAAANrgAAE           1878
 

In the output, you can see the errors having number 1878. This error means that an error has occurred for a non-existing time.

To continue with this example, assume that SCOTT.T has a materialized view log scott.mlog$_t, and that there is a single materialized view on SCOTT.T. Then, assume that this 1878 error has been corrected.

Finally, you can upgrade the table, materialized view log and materialized view as follows:

VAR numfail number;
BEGIN
  DBMS_DST.UPGRADE_TABLE(:numfail,
           table_list                => 'SCOTT.t, SCOTT.mlog$_T',
           parallel                  => TRUE,
           continue_after_errors     => FALSE,
           log_errors                => TRUE,
           log_errors_table          => 'SYS.DST$ERROR_TABLE',
           error_on_overlap_time     => FALSE,
           error_on_nonexisting_time => TRUE,
           log_triggers_table        => 'SYS.DST$TRIGGER_TABLE',
           atomic_upgrade            => TRUE);
 
 DBMS_OUTPUT.PUT_LINE('Number of tables failed to upgrade:'|| :numfail);
END;
/

VAR numfail number;
BEGIN
  DBMS_DST.UPGRADE_TABLE(:numfail, 
           table_list                => 'SCOTT.MYMV_T',
           parallel                  => TRUE,
           continue_after_errors     => FALSE,
           log_errors                => TRUE, 
           log_errors_table          => 'SYS.DST$ERROR_TABLE',
           error_on_overlap_time     => FALSE,
           error_on_nonexisting_time => TRUE,
           log_triggers_table        => 'SYS.DST$TRIGGER_TABLE',
           atomic_upgrade            => TRUE);
 
  DBMS_OUTPUT.PUT_LINE('Number of tables failed to upgrade:'|| :numfail);
END;
/ 

The atomic_upgrade parameter enables you to combine the upgrade of the table with its materialized view log.

After all the tables are upgraded, you can invoke END_UPGRADE to end an upgrade window as shown below:

VAR numfail number;
BEGIN
  DBMS_DST.END_UPGRADE(:numfail);
  DBMS_OUTPUT.PUT_LINE('Number of tables failed to upgrade:'|| :numfail);
END;
/

The upgrade window ends if all the affected tables are upgraded successfully, else the output shows how many tables did not upgrade successfully.

4.7.2.4 Upgrade Error Handling

There are three major semantic errors that can occur during an upgrade. The first is when an existing time becomes a non-existing time, the second is when a time becomes duplicated, and the third is when a duplicate time becomes a non-duplicate time.

As an example of the first case, consider the change from Pacific Standard Time (PST) to Pacific Daylight Saving Time (PDT) in 2007. This change takes place on Mar-11-2007 at 2AM according to version 3 (and any later version up to at least 32) when the clock moves forward one hour to 3AM and produces a gap between 2AM and 3AM. In version 2, this time change occurs on Apr-01-2007. If you upgrade the time zone file from version 2 to version 3, any time in the interval between 2AM and 3AM on Mar-11-2007 is not valid, and raises an error (ORA-1878) if ERROR_ON_NONEXISTING_TIME is set to TRUE. Therefore, there is a non-existing time problem. When ERROR_ON_NONEXISTING_TIME is set to FALSE, which is the default value for this parameter, the error is not reported and Oracle preserves UTC time in this case. For example, "Mar-11-2007 02:30 PST" in version 2 becomes "Mar-11-2007 03:30 PDT" in version 3 as they both are translated to the same UTC timestamp.

An example of the second case occurs when changing from PDT to PST. For example, in version 3 for 2007, the change occurs on Nov-04-2007, when the time falls back from 2AM to 1AM. This means that times in the interval <1AM, 2AM> on Nov-04-2007 can appear twice, once with PST and once with PDT. In version 2, this transition occurs on Oct-28-2007 at 2AM. Thus, any timestamp within <1AM, 2AM> on Nov-04-2007, which is uniquely identified in version 2, results in an error (ORA-1883) in version 3, if ERROR_ON_OVERLAP_TIME is set to TRUE. If you leave this parameter on its default setting of FALSE, then the UTC timestamp value is preserved and no error is raised. In this situation, if you change the version from 2 to 3, timestamp "Nov-04-2007 01:30 PST" in version 2 becomes "Nov-04-2007 01:30 PST" in version 3.

The third case happens when a duplicate time becomes a non-duplicate time. Consider the transition from PDT to PST in 2007, for example, where <1AM, 2AM> on Oct-28-2007 in version 2 is the overlapped interval. Then both "Oct-28-2007 01:30 PDT" and "Oct-28-2007 01:30 PST" are valid timestamps in version 2. If ERROR_ON_OVERLAP_TIME is set to TRUE, an ORA-1883 error is raised during an upgrade from version 2 to version 3. If ERROR_ON_OVERLAP_TIME is set to FALSE (the default value of this parameter), however, the LOCAL time is preserved and no error is reported. In this case, both "Oct-28-2007 01:30 PDT" and "Oct-28-2007 01:30 PST" in version 2 convert to the same "Oct-28-2007 01:30 PDT" in version 3. Note that setting ERROR_ON_OVERLAP_TIME to FALSE can potentially cause some time sequences to be reversed. For example, a job (Job A) scheduled at "Oct-28-2007 01:45 PDT" in version 2 is supposed to be executed before a job (Job B) scheduled at "Oct-28-2007 01:30 PST". After the upgrade to version 3, Job A is scheduled at "Oct-28-2007 01:45 PDT" and Job B remains at "Oct-28-2007 01:30 PDT", resulting in Job B being executed before Job A. Even though unchained scheduled jobs are not guaranteed to be executed in a certain order, this issue should be kept in mind when setting up scheduled jobs.

See Also:

Oracle Database PL/SQL Packages and Types Reference for more information regarding how to use these parameters

4.8 Clients and Servers Operating with Different Versions of Time Zone Files

In Oracle Database 11g, Release 11.2 and later, you can use different versions of time zone file on the client and the server. This mode of operation was not supported in the earlier Oracle Database releases. Both client and server must be Oracle Database 11g, Release 11.2 or later to operate in such a mixed mode.

See Also:

Oracle Call Interface Programmer's Guide for the ramifications of working in the mixed mode

OCI, JDBC, Pro*C, and SQL*Plus clients can now continue to communicate with the database server without having to update client-side time zone files. For other products, if not explicitly stated in the product-specific documentation, it should be assumed that such clients cannot operate with a database server with a different time zone file than the client. Otherwise, computations on the TIMESTAMP WITH TIMEZONE values that are region ID based may give inconsistent results on the client. This is due to different daylight saving time (DST) rules in effect for the time zone regions affected between the different time zone file versions at the client and on the server.

Note if an application connects to different databases directly or via database links, it is recommended that all databases be on the same time zone file version. Otherwise, computations on the TIMESTAMP WITH TIMEZONE values on these different databases may give inconsistent results. This is due to different DST rules in effect for the time zone regions affected between the different time zone file versions across the different database servers.

4.9 Setting the Database Time Zone

Set the database time zone when the database is created by using the SET TIME_ZONE clause of the CREATE DATABASE statement. If you do not set the database time zone, then it defaults to the time zone of the server's operating system.

The time zone may be set to a named region or an absolute offset from UTC. To set the time zone to a named region, use a statement similar to the following example:

CREATE DATABASE db01
...
SET TIME_ZONE='Europe/London';

To set the time zone to an offset from UTC, use a statement similar to the following example:

CREATE DATABASE db01
...
SET TIME_ZONE='-05:00';

The range of valid offsets is -12:00 to +14:00.

Note:

The database time zone is relevant only for TIMESTAMP WITH LOCAL TIME ZONE columns. Oracle recommends that you set the database time zone to UTC (0:00) to avoid data conversion and improve performance when data is transferred among databases. This is especially important for distributed databases, replication, and exporting and importing.

You can change the database time zone by using the SET TIME_ZONE clause of the ALTER DATABASE statement. For example:

ALTER DATABASE SET TIME_ZONE='Europe/London';
ALTER DATABASE SET TIME_ZONE='-05:00';

The ALTER DATABASE SET TIME_ZONE statement returns an error if the database contains a table with a TIMESTAMP WITH LOCAL TIME ZONE column and the column contains data.

The change does not take effect until the database has been shut down and restarted.

You can find out the database time zone by entering the following query:

SELECT dbtimezone FROM DUAL;

4.10 Setting the Session Time Zone

You can set the default session time zone with the ORA_SDTZ environment variable. When users retrieve TIMESTAMP WITH LOCAL TIME ZONE data, Oracle Database returns it in the users' session time zone. The session time zone also takes effect when a TIMESTAMP value is converted to the TIMESTAMP WITH TIME ZONE or TIMESTAMP WITH LOCAL TIME ZONE data type.

Note:

Setting the session time zone does not affect the value returned by the SYSDATE and SYSTIMESTAMP SQL function. SYSDATE returns the date and time of the operating system on which the database resides, taking into account the time zone of the database server's operating system that was in effect when the database was started.

The ORA_SDTZ environment variable can be set to the following values:

  • Operating system local time zone ('OS_TZ')

  • Database time zone ('DB_TZ')

  • Absolute offset from UTC (for example, '-05:00')

  • Time zone region name (for example, 'Europe/London')

To set ORA_SDTZ, use statements similar to one of the following in a UNIX environment (C shell):

% setenv ORA_SDTZ 'OS_TZ'
% setenv ORA_SDTZ 'DB_TZ'
% setenv ORA_SDTZ 'Europe/London'
% setenv ORA_SDTZ '-05:00'

When setting the ORA_SDTZ variable in a Microsoft Windows environment -- in the Registry, among system environment variables, or in a command prompt window -- do not enclose the time zone value in quotes.

You can change the time zone for a specific SQL session with the SET TIME_ZONE clause of the ALTER SESSION statement.

TIME_ZONE can be set to the following values:

  • Default local time zone when the session was started (local)

  • Database time zone (dbtimezone)

  • Absolute offset from UTC (for example, '+10:00')

  • Time zone region name (for example, 'Asia/Hong_Kong')

Use ALTER SESSION statements similar to the following:

ALTER SESSION SET TIME_ZONE=local;
ALTER SESSION SET TIME_ZONE=dbtimezone;
ALTER SESSION SET TIME_ZONE='Asia/Hong_Kong';
ALTER SESSION SET TIME_ZONE='+10:00';

You can find out the current session time zone by entering the following query:

SELECT sessiontimezone FROM DUAL;

4.11 Converting Time Zones With the AT TIME ZONE Clause

A datetime SQL expression can be one of the following:

  • A datetime column

  • A compound expression that yields a datetime value

A datetime expression can include an AT LOCAL clause or an AT TIME ZONE clause. If you include an AT LOCAL clause, then the result is returned in the current session time zone. If you include the AT TIME ZONE clause, then use one of the following settings with the clause:

  • Time zone offset: The string '(+|-)HH:MM' specifies a time zone as an offset from UTC. For example, '-07:00' specifies the time zone that is 7 hours behind UTC. For example, if the UTC time is 11:00 a.m., then the time in the '-07:00' time zone is 4:00 a.m.

  • DBTIMEZONE: Oracle Database uses the database time zone established (explicitly or by default) during database creation.

  • SESSIONTIMEZONE: Oracle Database uses the session time zone established by default or in the most recent ALTER SESSION statement.

  • Time zone region name: Oracle Database returns the value in the time zone indicated by the time zone region name. For example, you can specify Asia/Hong_Kong.

  • An expression: If an expression returns a character string with a valid time zone format, then Oracle Database returns the input in that time zone. Otherwise, Oracle Database returns an error.

The following example converts the datetime value in the America/New_York time zone to the datetime value in the America/Los_Angeles time zone.

Example 4-5 Converting a Datetime Value to Another Time Zone

SELECT FROM_TZ(CAST(TO_DATE('1999-12-01 11:00:00',
     'YYYY-MM-DD HH:MI:SS') AS TIMESTAMP), 'America/New_York')
     AT TIME ZONE 'America/Los_Angeles' "West Coast Time"
FROM DUAL;

West Coast Time
----------------------------------------------------------
01-DEC-99 08.00.00.000000 AM AMERICA/LOS_ANGELES

4.12 Support for Daylight Saving Time

Oracle Database automatically determines whether Daylight Saving Time is in effect for a specified time zone and returns the corresponding local time. Normally, date/time values are sufficient to allow Oracle Database to determine whether Daylight Saving Time is in effect for a specified time zone. The periods when Daylight Saving Time begins or ends are boundary cases. For example, in the Eastern region of the United States, the time changes from 01:59:59 a.m. to 3:00:00 a.m. when Daylight Saving Time goes into effect. The interval between 02:00:00 and 02:59:59 a.m. does not exist. Values in that interval are invalid. When Daylight Saving Time ends, the time changes from 02:00:00 a.m. to 01:00:01 a.m. The interval between 01:00:01 and 02:00:00 a.m. is repeated. Values from that interval are ambiguous because they occur twice.

To resolve these boundary cases, Oracle Database uses the TZR and TZD format elements. TZR represents the time zone region in datetime input strings. Examples are 'Australia/North', 'UTC', and 'Singapore'. TZD represents an abbreviated form of the time zone region with Daylight Saving Time information. Examples are 'PST' for U. S. Pacific Standard Time and 'PDT' for U. S. Pacific Daylight Time. To see a list of valid values for the TZR and TZD format elements, query the TZNAME and TZABBREV columns of the V$TIMEZONE_NAMES dynamic performance view.

See Also:

4.12.1 Examples: The Effect of Daylight Saving Time on Datetime Calculations

The TIMESTAMP data type does not accept time zone values and does not calculate Daylight Saving Time.

The TIMESTAMP WITH TIME ZONE and TIMESTAMP WITH LOCAL TIME ZONE data types have the following behavior:

  • If a time zone region is associated with the datetime value, then the database server knows the Daylight Saving Time rules for the region and uses the rules in calculations.

  • Daylight Saving Time is not calculated for regions that do not use Daylight Saving Time.

The rest of this section contains examples that use datetime data types. The examples use the global_orders table. It contains the orderdate1 column of TIMESTAMP data type and the orderdate2 column of TIMESTAMP WITH TIME ZONE data type. The global_orders table is created as follows:

CREATE TABLE global_orders ( orderdate1 TIMESTAMP(0),
                      orderdate2 TIMESTAMP(0) WITH TIME ZONE);
INSERT INTO global_orders VALUES ( '28-OCT-00 11:24:54 PM',
                            '28-OCT-00 11:24:54 PM America/New_York');

Note:

If you have created a global_orders table for the previous examples, then drop the global_orders table before you try Example 4-7 through Example 4-8.

Example 4-6 Comparing Daylight Saving Time Calculations Using TIMESTAMP WITH TIME ZONE and TIMESTAMP

SELECT orderdate1 + INTERVAL '8' HOUR, orderdate2 + INTERVAL '8' HOUR 
       FROM global_orders;

The following output results:

ORDERDATE1+INTERVAL'8'HOUR      ORDERDATE2+INTERVAL'8'HOUR
--------------------------      --------------------------
29-OCT-00 07.24.54.000000 AM    29-OCT-00 06.24.54.000000 AM AMERICA/NEW_YORK

This example shows the effect of adding 8 hours to the columns. The time period includes a Daylight Saving Time boundary (a change from Daylight Saving Time to standard time). The orderdate1 column is of TIMESTAMP data type, which does not use Daylight Saving Time information and thus does not adjust for the change that took place in the 8-hour interval. The TIMESTAMP WITH TIME ZONE data type does adjust for the change, so the orderdate2 column shows the time as one hour earlier than the time shown in the orderdate1 column.

Example 4-7 Comparing Daylight Saving Time Calculations Using TIMESTAMP WITH LOCAL TIME ZONE and TIMESTAMP

The TIMESTAMP WITH LOCAL TIME ZONE data type uses the value of TIME_ZONE that is set for the session environment. The following statements set the value of the TIME_ZONE session parameter and create a global_orders table. The global_orders table has one column of TIMESTAMP data type and one column of TIMESTAMP WITH LOCAL TIME ZONE data type.

ALTER SESSION SET TIME_ZONE='America/New_York';
CREATE TABLE global_orders ( orderdate1 TIMESTAMP(0),
                             orderdate2 TIMESTAMP(0) WITH LOCAL TIME ZONE );
INSERT INTO global_orders VALUES ( '28-OCT-00 11:24:54 PM',
                                   '28-OCT-00 11:24:54 PM' );

Add 8 hours to both columns.

SELECT orderdate1 + INTERVAL '8' HOUR, orderdate2 + INTERVAL '8' HOUR 
FROM global_orders;

Because a time zone region is associated with the datetime value for orderdate2, the Oracle Database server uses the Daylight Saving Time rules for the region. Thus the output is the same as in Example 4-6. There is a one-hour difference between the two calculations because Daylight Saving Time is not calculated for the TIMESTAMP data type, and the calculation crosses a Daylight Saving Time boundary.

Example 4-8 Daylight Saving Time Is Not Calculated for Regions That Do Not Use Daylight Saving Time

Set the time zone region to UTC. UTC does not use Daylight Saving Time.

ALTER SESSION SET TIME_ZONE='UTC';

Truncate the global_orders table.

TRUNCATE TABLE global_orders;

Insert values into the global_orders table.

INSERT INTO global_orders VALUES ( '28-OCT-00 11:24:54 PM',
                                 TIMESTAMP '2000-10-28 23:24:54 ' );

Add 8 hours to the columns.

SELECT orderdate1 + INTERVAL '8' HOUR, orderdate2 + INTERVAL '8' HOUR 
FROM global_orders;

The following output results.

ORDERDATE1+INTERVAL'8'HOUR                 ORDERDATE2+INTERVAL'8'HOUR
--------------------------                 ---------------------------
29-OCT-00 07.24.54.000000000 AM            29-OCT-00 07.24.54.000000000 AM UTC

The times are the same because Daylight Saving Time is not calculated for the UTC time zone region.