NAME | SYNOPSIS | DESCRIPTION | USAGE | OPTIONS | VARIABLES | ENVIRONMENT VARIABLES | EXAMPLES | SEE ALSO | COLOPHON

VGRENAME(8)                System Manager's Manual               VGRENAME(8)

NAME         top

       vgrename - Rename a volume group

SYNOPSIS         top

       vgrename position_args
           [ option_args ]

DESCRIPTION         top

       vgrename renames a VG.
       All VGs visible to a system need to have different names, otherwise
       many LVM commands will refuse to run or give warning messages. VGs
       with the same name can occur when disks are moved between machines,
       or filters are changed. If a newly connected disk has a VG with the
       same name as the VG containing the root filesystem, the machine may
       not boot correctly. When two VGs have the same name, the VG UUID can
       be used in place of the source VG name.

USAGE         top

       Rename a VG.
       vgrename VG VG_new
           [ COMMON_OPTIONS ]
       Rename a VG by specifying the VG UUID.
       vgrename String VG_new
           [ COMMON_OPTIONS ]
       Common options for command:
           [ -A|--autobackup y|n ]
           [ -f|--force ]
           [    --reportformat basic|json ]
       Common options for lvm:
           [ -d|--debug ]
           [ -h|--help ]
           [ -q|--quiet ]
           [ -t|--test ]
           [ -v|--verbose ]
           [ -y|--yes ]
           [    --commandprofile String ]
           [    --config String ]
           [    --driverloaded y|n ]
           [    --longhelp ]
           [    --profile String ]
           [    --version ]

OPTIONS         top

       -A|--autobackup y|n
              Specifies if metadata should be backed up automatically after
              a change.  Enabling this is strongly advised! See
              vgcfgbackup(8) for more information.
       --commandprofile String
              The command profile to use for command configuration.  See
              lvm.conf(5) for more information about profiles.
       --config String
              Config settings for the command. These override lvm.conf
              settings.  The String arg uses the same format as lvm.conf, or
              may use section/field syntax.  See lvm.conf(5) for more
              information about config.
       -d|--debug ...
              Set debug level. Repeat from 1 to 6 times to increase the
              detail of messages sent to the log file and/or syslog (if
              configured).
       --driverloaded y|n
              If set to no, the command will not attempt to use device-
              mapper.  For testing and debugging.
       -f|--force ...
              Override various checks, confirmations and protections.  Use
              with extreme caution.
       -h|--help
              Display help text.
       --longhelp
              Display long help text.
       --profile String
              An alias for --commandprofile or --metadataprofile, depending
              on the command.
       -q|--quiet ...
              Suppress output and log messages. Overrides --debug and
              --verbose.  Repeat once to also suppress any prompts with
              answer 'no'.
       --reportformat basic|json
              Overrides current output format for reports which is defined
              globally by the report/output_format setting in lvm.conf.
              basic is the original format with columns and rows.  If there
              is more than one report per command, each report is prefixed
              with the report name for identification. json produces report
              output in JSON format. See lvmreport(7) for more information.
       -t|--test
              Run in test mode. Commands will not update metadata.  This is
              implemented by disabling all metadata writing but nevertheless
              returning success to the calling function. This may lead to
              unusual error messages in multi-stage operations if a tool
              relies on reading back metadata it believes has changed but
              hasn't.
       -v|--verbose ...
              Set verbose level. Repeat from 1 to 4 times to increase the
              detail of messages sent to stdout and stderr.
       --version
              Display version information.
       -y|--yes
              Do not prompt for confirmation interactively but always assume
              the answer yes. Use with extreme caution.  (For automatic no,
              see -qq.)

VARIABLES         top

       VG
              Volume Group name.  See lvm(8) for valid names.
       String
              See the option description for information about the string
              content.
       Size[UNIT]
              Size is an input number that accepts an optional unit.  Input
              units are always treated as base two values, regardless of
              capitalization, e.g. 'k' and 'K' both refer to 1024.  The
              default input unit is specified by letter, followed by |UNIT.
              UNIT represents other possible input units: bBsSkKmMgGtTpPeE.
              b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
              m|M is megabytes, g|G is gigabytes, t|T is terabytes, p|P is
              petabytes, e|E is exabytes.  (This should not be confused with
              the output control --units, where capital letters mean
              multiple of 1000.)

ENVIRONMENT VARIABLES         top

       See lvm(8) for information about environment variables used by lvm.
       For example, LVM_VG_NAME can generally be substituted for a required
       VG parameter.

EXAMPLES         top

       Rename VG "vg02" to "myvg":
       vgrename vg02 myvg
       Rename the VG with the specified UUID to "myvg".
       vgrename Zvlifi-Ep3t-e0Ng-U42h-o0ye-KHu1-nl7Ns4 myvg

SEE ALSO         top

       lvm(8) lvm.conf(5) lvmconfig(8)
       pvchange(8) pvck(8) pvcreate(8) pvdisplay(8) pvmove(8) pvremove(8)
       pvresize(8) pvs(8) pvscan(8)
       vgcfgbackup(8) vgcfgrestore(8) vgchange(8) vgck(8) vgcreate(8)
       vgconvert(8) vgdisplay(8) vgexport(8) vgextend(8) vgimport(8)
       vgimportclone(8) vgmerge(8) vgmknodes(8) vgreduce(8) vgremove(8)
       vgrename(8) vgs(8) vgscan(8) vgsplit(8)
       lvcreate(8) lvchange(8) lvconvert(8) lvdisplay(8) lvextend(8)
       lvreduce(8) lvremove(8) lvrename(8) lvresize(8) lvs(8) lvscan(8)
       lvm-fullreport(8) lvm-lvpoll(8) lvm2-activation-generator(8)
       blkdeactivate(8) lvmdump(8)
       dmeventd(8) lvmetad(8) lvmpolld(8) lvmlockd(8) lvmlockctl(8) clvmd(8)
       cmirrord(8) lvmdbusd(8)
       lvmsystemid(7) lvmreport(7) lvmraid(7) lvmthin(7) lvmcache(7)

COLOPHON         top

       This page is part of the lvm2 (Logical Volume Manager 2) project.
       Information about the project can be found at 
       ⟨http://www.sourceware.org/lvm2/⟩.  If you have a bug report for this
       manual page, send it to linux-lvm@redhat.com.  This page was obtained
       from the project's upstream Git repository 
       ⟨git://sourceware.org/git/lvm2.git⟩ on 2017-07-05.  If you discover
       any rendering problems in this HTML version of the page, or you
       believe there is a better or more up-to-date source for the page, or
       you have corrections or improvements to the information in this
       COLOPHON (which is not part of the original manual page), send a mail
       to man-pages@man7.org
Red Hat, Inc.      LVM TOOLS 2.02.173(2)-git (2017-06-28)        VGRENAME(8)

Pages that refer to this page: lvchange(8)lvconvert(8)lvcreate(8)lvdisplay(8)lvextend(8)lvm(8)lvmconfig(8)lvmdiskscan(8)lvm-fullreport(8)lvm-lvpoll(8)lvreduce(8)lvremove(8)lvrename(8)lvresize(8)lvs(8)lvscan(8)pvchange(8)pvck(8)pvcreate(8)pvdisplay(8)pvmove(8)pvremove(8)pvresize(8)pvs(8)pvscan(8)vgcfgbackup(8)vgcfgrestore(8)vgchange(8)vgck(8)vgconvert(8)vgcreate(8)vgdisplay(8)vgexport(8)vgextend(8)vgimport(8)vgimportclone(8)vgmerge(8)vgmknodes(8)vgreduce(8)vgremove(8)vgrename(8)vgs(8)vgscan(8)vgsplit(8)