NAME | SYNOPSIS | DESCRIPTION | USAGE | OPTIONS | VARIABLES | ENVIRONMENT VARIABLES | SEE ALSO | COLOPHON

VGCK(8)                    System Manager's Manual                   VGCK(8)

NAME         top

       vgck - Check the consistency of volume group(s)

SYNOPSIS         top

       vgck
           [ option_args ]
           [ position_args ]

DESCRIPTION         top

       vgck checks LVM metadata for consistency.

USAGE         top

       vgck
           [    --reportformat basic|json ]
           [ COMMON_OPTIONS ]
           [ VG|Tag ... ]
       Common options for lvm:
           [ -d|--debug ]
           [ -h|--help ]
           [ -q|--quiet ]
           [ -t|--test ]
           [ -v|--verbose ]
           [ -y|--yes ]
           [    --commandprofile String ]
           [    --config String ]
           [    --driverloaded y|n ]
           [    --longhelp ]
           [    --profile String ]
           [    --version ]

OPTIONS         top

       --commandprofile String
              The command profile to use for command configuration.  See
              lvm.conf(5) for more information about profiles.
       --config String
              Config settings for the command. These override lvm.conf
              settings.  The String arg uses the same format as lvm.conf, or
              may use section/field syntax.  See lvm.conf(5) for more
              information about config.
       -d|--debug ...
              Set debug level. Repeat from 1 to 6 times to increase the
              detail of messages sent to the log file and/or syslog (if
              configured).
       --driverloaded y|n
              If set to no, the command will not attempt to use device-
              mapper.  For testing and debugging.
       -h|--help
              Display help text.
       --longhelp
              Display long help text.
       --profile String
              An alias for --commandprofile or --metadataprofile, depending
              on the command.
       -q|--quiet ...
              Suppress output and log messages. Overrides --debug and
              --verbose.  Repeat once to also suppress any prompts with
              answer 'no'.
       --reportformat basic|json
              Overrides current output format for reports which is defined
              globally by the report/output_format setting in lvm.conf.
              basic is the original format with columns and rows.  If there
              is more than one report per command, each report is prefixed
              with the report name for identification. json produces report
              output in JSON format. See lvmreport(7) for more information.
       -t|--test
              Run in test mode. Commands will not update metadata.  This is
              implemented by disabling all metadata writing but nevertheless
              returning success to the calling function. This may lead to
              unusual error messages in multi-stage operations if a tool
              relies on reading back metadata it believes has changed but
              hasn't.
       -v|--verbose ...
              Set verbose level. Repeat from 1 to 4 times to increase the
              detail of messages sent to stdout and stderr.
       --version
              Display version information.
       -y|--yes
              Do not prompt for confirmation interactively but always assume
              the answer yes. Use with extreme caution.  (For automatic no,
              see -qq.)

VARIABLES         top

       VG
              Volume Group name.  See lvm(8) for valid names.
       Tag
              Tag name.  See lvm(8) for information about tag names and
              using tags in place of a VG, LV or PV.
       String
              See the option description for information about the string
              content.
       Size[UNIT]
              Size is an input number that accepts an optional unit.  Input
              units are always treated as base two values, regardless of
              capitalization, e.g. 'k' and 'K' both refer to 1024.  The
              default input unit is specified by letter, followed by |UNIT.
              UNIT represents other possible input units: bBsSkKmMgGtTpPeE.
              b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
              m|M is megabytes, g|G is gigabytes, t|T is terabytes, p|P is
              petabytes, e|E is exabytes.  (This should not be confused with
              the output control --units, where capital letters mean
              multiple of 1000.)

ENVIRONMENT VARIABLES         top

       See lvm(8) for information about environment variables used by lvm.
       For example, LVM_VG_NAME can generally be substituted for a required
       VG parameter.

SEE ALSO         top

       lvm(8) lvm.conf(5) lvmconfig(8)
       pvchange(8) pvck(8) pvcreate(8) pvdisplay(8) pvmove(8) pvremove(8)
       pvresize(8) pvs(8) pvscan(8)
       vgcfgbackup(8) vgcfgrestore(8) vgchange(8) vgck(8) vgcreate(8)
       vgconvert(8) vgdisplay(8) vgexport(8) vgextend(8) vgimport(8)
       vgimportclone(8) vgmerge(8) vgmknodes(8) vgreduce(8) vgremove(8)
       vgrename(8) vgs(8) vgscan(8) vgsplit(8)
       lvcreate(8) lvchange(8) lvconvert(8) lvdisplay(8) lvextend(8)
       lvreduce(8) lvremove(8) lvrename(8) lvresize(8) lvs(8) lvscan(8)
       lvm-fullreport(8) lvm-lvpoll(8) lvm2-activation-generator(8)
       blkdeactivate(8) lvmdump(8)
       dmeventd(8) lvmetad(8) lvmpolld(8) lvmlockd(8) lvmlockctl(8) clvmd(8)
       cmirrord(8) lvmdbusd(8)
       lvmsystemid(7) lvmreport(7) lvmraid(7) lvmthin(7) lvmcache(7)

COLOPHON         top

       This page is part of the lvm2 (Logical Volume Manager 2) project.
       Information about the project can be found at 
       ⟨http://www.sourceware.org/lvm2/⟩.  If you have a bug report for this
       manual page, send it to linux-lvm@redhat.com.  This page was obtained
       from the project's upstream Git repository 
       ⟨git://sourceware.org/git/lvm2.git⟩ on 2017-07-05.  If you discover
       any rendering problems in this HTML version of the page, or you
       believe there is a better or more up-to-date source for the page, or
       you have corrections or improvements to the information in this
       COLOPHON (which is not part of the original manual page), send a mail
       to man-pages@man7.org
Red Hat, Inc.      LVM TOOLS 2.02.173(2)-git (2017-06-28)            VGCK(8)

Pages that refer to this page: lvchange(8)lvconvert(8)lvcreate(8)lvdisplay(8)lvextend(8)lvm(8)lvmconfig(8)lvmdiskscan(8)lvm-fullreport(8)lvm-lvpoll(8)lvreduce(8)lvremove(8)lvrename(8)lvresize(8)lvs(8)lvscan(8)pvchange(8)pvck(8)pvcreate(8)pvdisplay(8)pvmove(8)pvremove(8)pvresize(8)pvs(8)pvscan(8)vgcfgbackup(8)vgcfgrestore(8)vgchange(8)vgck(8)vgconvert(8)vgcreate(8)vgdisplay(8)vgexport(8)vgextend(8)vgimport(8)vgimportclone(8)vgmerge(8)vgmknodes(8)vgreduce(8)vgremove(8)vgrename(8)vgs(8)vgscan(8)vgsplit(8)