NAME | SYNOPSIS | DESCRIPTION | OPTIONS | EXAMPLES | SEE ALSO | COLOPHON

Match-all classifier in tc(8)       Linux      Match-all classifier in tc(8)

NAME         top

       matchall - traffic control filter that matches every packet

SYNOPSIS         top

       tc filter ... matchall [ skip_sw | skip_hw  ] [ action ACTION_SPEC ]
               [ classid CLASSID ]

DESCRIPTION         top

       The matchall filter allows to classify every packet that flows on the
       port and run a action on it.

OPTIONS         top

       action ACTION_SPEC
              Apply an action from the generic actions framework on matching
              packets.
       classid CLASSID
              Push matching packets into the class identified by CLASSID.
       skip_sw
              Do not process filter by software. If hardware has no offload
              support for this filter, or TC offload is not enabled for the
              interface, operation will fail.
       skip_hw
              Do not process filter by hardware.

EXAMPLES         top

       To create ingress mirroring from port eth1 to port eth2:
              tc qdisc  add dev eth1 handle ffff: ingress
              tc filter add dev eth1 parent ffff:           \
                      matchall skip_sw                      \
                      action mirred egress mirror           \
                      dev eth2
       The first command creats an ingress qdisc with handle ffff: on device
       eth1 where the second command attaches a matchall filters on it that
       mirrors the packets to device eth2.
       To create egress mirroring from port eth1 to port eth2:
              tc qdisc add dev eth1 handle 1: root prio
              tc filter add dev eth1 parent 1:               \
                      matchall skip_sw                       \
                      action mirred egress mirror            \
                      dev eth2
       The first command creats an egress qdisc with handle 1: that replaces
       the root qdisc on device eth1 where the second command attaches a
       matchall filters on it that mirrors the packets to device eth2.
       To sample one of every 100 packets flowing into interface eth0 to
       psample group 12:
              tc qdisc add dev eth0 handle ffff: ingress
              tc filter add dev eth0 parent ffff: matchall \
                   action sample rate 100 group 12

SEE ALSO         top

       tc(8),

COLOPHON         top

       This page is part of the iproute2 (utilities for controlling TCP/IP
       networking and traffic) project.  Information about the project can
       be found at 
       ⟨http://www.linuxfoundation.org/collaborate/workgroups/networking/iproute2⟩.
       If you have a bug report for this manual page, send it to
       netdev@vger.kernel.org, shemminger@osdl.org.  This page was obtained
       from the project's upstream Git repository 
       ⟨git://git.kernel.org/pub/scm/linux/kernel/git/shemminger/iproute2.git⟩
       on 2017-07-05.  If you discover any rendering problems in this HTML
       version of the page, or you believe there is a better or more up-to-
       date source for the page, or you have corrections or improvements to
       the information in this COLOPHON (which is not part of the original
       manual page), send a mail to man-pages@man7.org
iproute2                         21 Oct 2015   Match-all classifier in tc(8)

Pages that refer to this page: tc(8)tc-sample(8)