|
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | DEVICES | SIZES | SCRIPT FILES | DISK LABELS | DOS mode and DOS 6.x WARNING | COLORS | AUTHORS | ENVIRONMENT | SEE ALSO | AVAILABILITY | COLOPHON |
FDISK(8) System Administration FDISK(8)
fdisk - manipulate disk partition table
fdisk [options] device
fdisk -l [device...]
fdisk is a dialog-driven program for creation and manipulation of
partition tables. It understands GPT, MBR, Sun, SGI and BSD
partition tables.
Block devices can be divided into one or more logical disks called
partitions. This division is recorded in the partition table,
usually found in sector 0 of the disk. (In the BSD world one talks
about `disk slices' and a `disklabel'.)
All partitioning is driven by device I/O limits (the topology) by
default. fdisk is able to optimize the disk layout for a 4K-sector
size and use an alignment offset on modern devices for MBR and GPT.
It is always a good idea to follow fdisk's defaults as the default
values (e.g. first and last partition sectors) and partition sizes
specified by the +<size>{M,G,...} notation are always aligned
according to the device properties.
Note that partx(8) provides a rich interface for scripts to print
disk layouts, fdisk is mostly designed for humans. Backward
compatibility in the output of fdisk is not guaranteed. The input
(the commands) should always be backward compatible.
-b, --sector-size sectorsize
Specify the sector size of the disk. Valid values are 512,
1024, 2048, and 4096. (Recent kernels know the sector size.
Use this option only on old kernels or to override the
kernel's ideas.) Since util-linux-2.17, fdisk differentiates
between logical and physical sector size. This option changes
both sector sizes to sectorsize.
-B, --protect-boot
Don't erase the begin of the first disk sector when create a
new disk label. This feature is supported for GPT and MBR.
-c, --compatibility[=mode]
Specify the compatibility mode, 'dos' or 'nondos'. The
default is non-DOS mode. For backward compatibility, it is
possible to use the option without the mode argument -- then
the default is used. Note that the optional mode argument
cannot be separated from the -c option by a space, the correct
form is for example '-c=dos'.
-h, --help
Display a help text and exit.
-L, --color[=when]
Colorize the output. The optional argument when can be auto,
never or always. If the when argument is omitted, it defaults
to auto. The colors can be disabled; for the current built-in
default see the --help output. See also the COLORS section.
-l, --list
List the partition tables for the specified devices and then
exit. If no devices are given, those mentioned in
/proc/partitions (if that file exists) are used.
-o, --output list
Specify which output columns to print. Use --help to get a
list of all supported columns.
The default list of columns may be extended if list is
specified in the format +list (e.g. -o +UUID).
-s, --getsz
Print the size in 512-byte sectors of each given block device.
This option is DEPRECATED in favour of blockdev(1).
-t, --type type
Enable support only for disklabels of the specified type, and
disable support for all other types.
-u, --units[=unit]
When listing partition tables, show sizes in 'sectors' or in
'cylinders'. The default is to show sizes in sectors. For
backward compatibility, it is possible to use the option
without the unit argument -- then the default is used. Note
that the optional unit argument cannot be separated from the
-u option by a space, the correct form is for example
'-u=cylinders'.
-C, --cylinders number
Specify the number of cylinders of the disk. I have no idea
why anybody would want to do so.
-H, --heads number
Specify the number of heads of the disk. (Not the physical
number, of course, but the number used for partition tables.)
Reasonable values are 255 and 16.
-S, --sectors number
Specify the number of sectors per track of the disk. (Not the
physical number, of course, but the number used for partition
tables.) A reasonable value is 63.
-w, --wipe when
Wipe filesystem, RAID and partition-table signatures from the
device, in order to avoid possible collisions. The argument
when can be auto, never or always. When this option is not
given, the default is auto, in which case signatures are wiped
only when in interactive mode. In all cases detected
signatures are reported by warning messages before a new
partition table is created. See also wipefs(8) command.
-W, --wipe-partition when
Wipe filesystem, RAID and partition-table signatures from a
newly created partitions, in order to avoid possible
collisions. The argument when can be auto, never or always.
When this option is not given, the default is auto, in which
case signatures are wiped only when in interactive mode and
after confirmation by user. In all cases detected signatures
are reported by warning messages before a new partition is
created. See also wipefs(8) command.
-V, --version
Display version information and exit.
The device is usually /dev/sda, /dev/sdb or so. A device name refers
to the entire disk. Old systems without libata (a library used
inside the Linux kernel to support ATA host controllers and devices)
make a difference between IDE and SCSI disks. In such cases the
device name will be /dev/hd* (IDE) or /dev/sd* (SCSI).
The partition is a device name followed by a partition number. For
example, /dev/sda1 is the first partition on the first hard disk in
the system. See also Linux kernel documentation (the
Documentation/devices.txt file).
The "last sector" dialog accepts partition size specified by number
of sectors or by +<size>{K,B,M,G,...} notation.
If the size is prefixed by '+' then it is interpreted as relative to
the partition first sector. In this case the size is expected in
bytes and the number may be followed by the multiplicative suffixes
KiB=1024, MiB=1024*1024, and so on for GiB, TiB, PiB, EiB, ZiB and
YiB. The "iB" is optional, e.g. "K" has the same meaning as "KiB".
The relative sizes are always aligned according to device I/O limits.
The +<size>{K,B,M,G,...} notation is recommended.
For backward compatibility fdisk also accepts the suffixes KB=1000,
MB=1000*1000, and so on for GB, TB, PB, EB, ZB and YB. These 10^N
suffixes are deprecated.
fdisk allows to read (by 'I' command) sfdisk compatible script files.
The script is applied to in-memory partition table, and then it is
possible to modify the partition table before you write it to the
device.
And vice-versa it is possible to write the current in-memory disk
layout to the script file by command 'O'.
The script files are compatible between cfdisk, sfdisk, fdisk and
another libfdisk applications. For more details see sfdisk(8).
GPT (GUID Partition Table)
GPT is modern standard for the layout of the partition table.
GPT uses 64-bit logical block addresses, checksums, UUIDs and
names for partitions and an unlimited number of partitions
(although the number of partitions is usually restricted to
128 in many partitioning tools).
Note that the first sector is still reserved for a protective
MBR in the GPT specification. It prevents MBR-only
partitioning tools from mis-recognizing and overwriting GPT
disks.
GPT is always a better choice than MBR, especially on modern
hardware with a UEFI boot loader.
DOS-type (MBR)
A DOS-type partition table can describe an unlimited number of
partitions. In sector 0 there is room for the description of
4 partitions (called `primary'). One of these may be an
extended partition; this is a box holding logical partitions,
with descriptors found in a linked list of sectors, each
preceding the corresponding logical partitions. The four
primary partitions, present or not, get numbers 1-4. Logical
partitions are numbered starting from 5.
In a DOS-type partition table the starting offset and the size
of each partition is stored in two ways: as an absolute number
of sectors (given in 32 bits), and as a
Cylinders/Heads/Sectors triple (given in 10+8+6 bits). The
former is OK -- with 512-byte sectors this will work up to 2
TB. The latter has two problems. First, these C/H/S fields
can be filled only when the number of heads and the number of
sectors per track are known. And second, even if we know what
these numbers should be, the 24 bits that are available do not
suffice. DOS uses C/H/S only, Windows uses both, Linux never
uses C/H/S. The C/H/S addressing is deprecated and may be
unsupported in some later fdisk version.
Please, read the DOS-mode section if you want DOS-compatible
partitions. fdisk does not care about cylinder boundaries by
default.
BSD/Sun-type
A BSD/Sun disklabel can describe 8 partitions, the third of
which should be a `whole disk' partition. Do not start a
partition that actually uses its first sector (like a swap
partition) at cylinder 0, since that will destroy the
disklabel. Note that a BSD label is usually nested within a
DOS partition.
IRIX/SGI-type
An IRIX/SGI disklabel can describe 16 partitions, the eleventh
of which should be an entire `volume' partition, while the
ninth should be labeled `volume header'. The volume header
will also cover the partition table, i.e., it starts at block
zero and extends by default over five cylinders. The
remaining space in the volume header may be used by header
directory entries. No partitions may overlap with the volume
header. Also do not change its type or make some filesystem
on it, since you will lose the partition table. Use this type
of label only when working with Linux on IRIX/SGI machines or
IRIX/SGI disks under Linux.
A sync() and an ioctl(BLKRRPART) (rereading the partition table from
disk) are performed before exiting when the partition table has been
updated.
Note that all this is deprecated. You don't have to care about things
like geometry and cylinders on modern operating systems. If you
really want DOS-compatible partitioning then you have to enable DOS
mode and cylinder units by using the '-c=dos -u=cylinders' fdisk
command-line options.
The DOS 6.x FORMAT command looks for some information in the first
sector of the data area of the partition, and treats this information
as more reliable than the information in the partition table. DOS
FORMAT expects DOS FDISK to clear the first 512 bytes of the data
area of a partition whenever a size change occurs. DOS FORMAT will
look at this extra information even if the /U flag is given -- we
consider this a bug in DOS FORMAT and DOS FDISK.
The bottom line is that if you use fdisk or cfdisk to change the size
of a DOS partition table entry, then you must also use dd(1) to zero
the first 512 bytes of that partition before using DOS FORMAT to
format the partition. For example, if you were using fdisk to make a
DOS partition table entry for /dev/sda1, then (after exiting fdisk
and rebooting Linux so that the partition table information is valid)
you would use the command "dd if=/dev/zero of=/dev/sda1 bs=512
count=1" to zero the first 512 bytes of the partition.
fdisk usually obtains the disk geometry automatically. This is not
necessarily the physical disk geometry (indeed, modern disks do not
really have anything like a physical geometry, certainly not
something that can be described in the simplistic
Cylinders/Heads/Sectors form), but it is the disk geometry that MS-
DOS uses for the partition table.
Usually all goes well by default, and there are no problems if Linux
is the only system on the disk. However, if the disk has to be
shared with other operating systems, it is often a good idea to let
an fdisk from another operating system make at least one partition.
When Linux boots it looks at the partition table, and tries to deduce
what (fake) geometry is required for good cooperation with other
systems.
Whenever a partition table is printed out in DOS mode, a consistency
check is performed on the partition table entries. This check
verifies that the physical and logical start and end points are
identical, and that each partition starts and ends on a cylinder
boundary (except for the first partition).
Some versions of MS-DOS create a first partition which does not begin
on a cylinder boundary, but on sector 2 of the first cylinder.
Partitions beginning in cylinder 1 cannot begin on a cylinder
boundary, but this is unlikely to cause difficulty unless you have
OS/2 on your machine.
For best results, you should always use an OS-specific partition
table program. For example, you should make DOS partitions with the
DOS FDISK program and Linux partitions with the Linux fdisk or Linux
cfdisk programs.
Implicit coloring can be disabled by an empty file /etc/terminal-
colors.d/fdisk.disable.
See terminal-colors.d(5) for more details about colorization
configuration. The logical color names supported by fdisk are:
header The header of the output tables.
help-title
The help section titles.
warn The warning messages.
welcome
The welcome message.
Karel Zak ⟨kzak@redhat.com⟩
Davidlohr Bueso ⟨dave@gnu.org⟩
The original version was written by Andries E. Brouwer, A. V. Le
Blanc and others.
FDISK_DEBUG=all
enables fdisk debug output.
LIBFDISK_DEBUG=all
enables libfdisk debug output.
LIBBLKID_DEBUG=all
enables libblkid debug output.
LIBSMARTCOLS_DEBUG=all
enables libsmartcols debug output.
LIBSMARTCOLS_DEBUG_PADDING=on
use visible padding characters. Requires enabled
LIBSMARTCOLS_DEBUG.
cfdisk(8), mkfs(8), partx(8), sfdisk(8)
The fdisk command is part of the util-linux package and is available
from https://www.kernel.org/pub/linux/utils/util-linux/.
This page is part of the util-linux (a random collection of Linux
utilities) project. Information about the project can be found at
⟨https://www.kernel.org/pub/linux/utils/util-linux/⟩. If you have a
bug report for this manual page, send it to
util-linux@vger.kernel.org. This page was obtained from the
project's upstream Git repository
⟨git://git.kernel.org/pub/scm/utils/util-linux/util-linux.git⟩ on
2017-07-05. If you discover any rendering problems in this HTML ver‐
sion of the page, or you believe there is a better or more up-to-date
source for the page, or you have corrections or improvements to the
information in this COLOPHON (which is not part of the original man‐
ual page), send a mail to man-pages@man7.org
util-linux February 2016 FDISK(8)
Pages that refer to this page: addpart(8), btrfs-filesystem(8), cfdisk(8), delpart(8), mkswap(8), parted(8), partx(8), pvcreate(8), resize2fs(8), resizepart(8), sfdisk(8)