|
PROLOG | NAME | SYNOPSIS | DESCRIPTION | RETURN VALUE | ERRORS | EXAMPLES | APPLICATION USAGE | RATIONALE | FUTURE DIRECTIONS | SEE ALSO | COPYRIGHT |
POPEN(3P) POSIX Programmer's Manual POPEN(3P)
This manual page is part of the POSIX Programmer's Manual. The Linux
implementation of this interface may differ (consult the
corresponding Linux manual page for details of Linux behavior), or
the interface may not be implemented on Linux.
popen — initiate pipe streams to or from a process
#include <stdio.h>
FILE *popen(const char *command, const char *mode);
The popen() function shall execute the command specified by the
string command. It shall create a pipe between the calling program
and the executed command, and shall return a pointer to a stream that
can be used to either read from or write to the pipe.
The environment of the executed command shall be as if a child
process were created within the popen() call using the fork()
function, and the child invoked the sh utility using the call:
execl(shell path, "sh", "-c", command, (char *)0);
where shell path is an unspecified pathname for the sh utility.
The popen() function shall ensure that any streams from previous
popen() calls that remain open in the parent process are closed in
the new child process.
The mode argument to popen() is a string that specifies I/O mode:
1. If mode is r, when the child process is started, its file
descriptor STDOUT_FILENO shall be the writable end of the pipe,
and the file descriptor fileno(stream) in the calling process,
where stream is the stream pointer returned by popen(), shall be
the readable end of the pipe.
2. If mode is w, when the child process is started its file
descriptor STDIN_FILENO shall be the readable end of the pipe,
and the file descriptor fileno(stream) in the calling process,
where stream is the stream pointer returned by popen(), shall be
the writable end of the pipe.
3. If mode is any other value, the result is unspecified.
After popen(), both the parent and the child process shall be capable
of executing independently before either terminates.
Pipe streams are byte-oriented.
Upon successful completion, popen() shall return a pointer to an open
stream that can be used to read or write to the pipe. Otherwise, it
shall return a null pointer and may set errno to indicate the error.
The popen() function shall fail if:
EMFILE {STREAM_MAX} streams are currently open in the calling
process.
The popen() function may fail if:
EMFILE {FOPEN_MAX} streams are currently open in the calling process.
EINVAL The mode argument is invalid.
The popen() function may also set errno values as described by
fork(3p) or pipe(3p).
The following sections are informative.
Using popen() to Obtain a List of Files from the ls Utility
The following example demonstrates the use of popen() and pclose() to
execute the command ls* in order to obtain a list of files in the
current directory:
#include <stdio.h>
...
FILE *fp;
int status;
char path[PATH_MAX];
fp = popen("ls *", "r");
if (fp == NULL)
/* Handle error */;
while (fgets(path, PATH_MAX, fp) != NULL)
printf("%s", path);
status = pclose(fp);
if (status == −1) {
/* Error reported by pclose() */
...
} else {
/* Use macros described under wait() to inspect `status' in order
to determine success/failure of command executed by popen() */
...
}
Since open files are shared, a mode r command can be used as an input
filter and a mode w command as an output filter.
Buffered reading before opening an input filter may leave the
standard input of that filter mispositioned. Similar problems with an
output filter may be prevented by careful buffer flushing; for
example, with fflush(3p).
A stream opened by popen() should be closed by pclose().
The behavior of popen() is specified for values of mode of r and w.
Other modes such as rb and wb might be supported by specific
implementations, but these would not be portable features. Note that
historical implementations of popen() only check to see if the first
character of mode is r. Thus, a mode of robert the robot would be
treated as mode r, and a mode of anything else would be treated as
mode w.
If the application calls waitpid() or waitid() with a pid argument
greater than 0, and it still has a stream that was called with
popen() open, it must ensure that pid does not refer to the process
started by popen().
To determine whether or not the environment specified in the Shell
and Utilities volume of POSIX.1‐2008 is present, use the function
call:
sysconf(_SC_2_VERSION)
(See sysconf(3p)).
The popen() function should not be used by programs that have set
user (or group) ID privileges. The fork() and exec family of
functions (except execlp() and execvp()), should be used instead.
This prevents any unforeseen manipulation of the environment of the
user that could cause execution of commands not anticipated by the
calling program.
If the original and popen()ed processes both intend to read or write
or read and write a common file, and either will be using FILE-type C
functions (fread(), fwrite(), and so on), the rules for sharing file
handles must be observed (see Section 2.5.1, Interaction of File
Descriptors and Standard I/O Streams).
None.
Section 2.5, Standard I/O Streams, fork(3p), pclose(3p), pipe(3p),
sysconf(3p), system(3p), wait(3p), waitid(3p)
The Base Definitions volume of POSIX.1‐2008, stdio.h(0p)
The Shell and Utilities volume of POSIX.1‐2008, sh(1p)
Portions of this text are reprinted and reproduced in electronic form
from IEEE Std 1003.1, 2013 Edition, Standard for Information
Technology -- Portable Operating System Interface (POSIX), The Open
Group Base Specifications Issue 7, Copyright (C) 2013 by the
Institute of Electrical and Electronics Engineers, Inc and The Open
Group. (This is POSIX.1-2008 with the 2013 Technical Corrigendum 1
applied.) In the event of any discrepancy between this version and
the original IEEE and The Open Group Standard, the original IEEE and
The Open Group Standard is the referee document. The original
Standard can be obtained online at http://www.unix.org/online.html .
Any typographical or formatting errors that appear in this page are
most likely to have been introduced during the conversion of the
source files to man page format. To report such errors, see
https://www.kernel.org/doc/man-pages/reporting_bugs.html .
IEEE/The Open Group 2013 POPEN(3P)
Pages that refer to this page: stdio.h(0p), awk(1p), pclose(3p), stdin(3p)