|
NAME | C SYNOPSIS | DESCRIPTION | SEE ALSO | FILES | DIAGNOSTICS | COLOPHON |
PMAFM(3) Library Functions Manual PMAFM(3)
pmafm, pmRecordSetup, pmRecordAddHost, pmRecordControl - record mode
support for PMAPI clients
#include <pcp/pmafm.h>
FILE *pmRecordSetup(const char *folio, const char *creator,
int replay);
int pmRecordAddHost(const char *host, int isdefault,
pmRecordHost **rhp);
int pmRecordControl(pmRecordHost *rhp, int request,
const char *options);
cc ... -lpcp_gui
These routines may be used to create a Performance Co-Pilot (PCP)
archive ``on the fly'' to support ``record mode'' services for PMAPI
client applications.
Each record mode ``session'' involves one or more PCP archive logs
each created using a dedicated pmlogger(1) process, with an overall
Archive Folio format as understood by pmafm(1), to name and collect
all of the archive logs associated with a single recording session.
The pmRecordHost structure is used to maintain state information
between the creator of the recording session and the associated
pmlogger process(es). The structure is defined as:
typedef struct {
FILE *f_config; /* caller writes pmlogger configuration here */
int fd_ipc; /* IPC channel to pmlogger */
char *logfile; /* full pathname for pmlogger error logfile */
pid_t pid; /* process id for pmlogger */
int status; /* exit status, -1 if unknown */
} pmRecordHost;
The routines are used in combination to create a recording session as
follows.
1. Call pmRecordSetup to establish a new recording session. A new
Archive Folio will be created using the name folio; if the file
or directory folio already exists, or the file folio cannot be
created, this is an error. The application that is creating the
session is identified by creator (most often this would be the
same as the global PMAPI application name, pmProgname). If the
application knows how to create its own configuration file to
replay the recorded session, then replay should be non-zero.
pmRecordSetup returns a stdio stream onto which the application
should write the text of the required replay configuration file,
if any.
2. For each host that is to be included in the recording session,
call pmRecordAddHost. A new pmRecordHost structure is returned
via rhp. It is assumed that pmcd(1) is running on host as this
is how pmlogger(1) will retrieve the required performance
metrics.
If this host is the default host for this recording session, then
isdefault should be non-zero. This will ensure that the
corresponding archive appears first in the PCP archive folio, and
hence the tools used to replay the archive folio will make the
correct determination of the archive associated with the default
host. At most one host per recording session may be nominated as
the default host.
The calling application should write the desired pmlogger
configuration onto the stdio stream returned via the f_config
field in the pmRecordHost structure.
3. Optionally add arguments to the command line that will be used to
launch pmlogger(1) by calling pmRecordControl with a request of
PM_REC_SETARG. The argument is passed via options and one call
to pmRecordControl is required for each distinct argument.
An argument may be added for a particular pmlogger instance
identified by rhp, or if the rhp argument is NULL the argument is
added for all pmlogger instances that will be launched in the
current recording session.
Independent of any calls to pmRecordControl with a request of
PM_REC_SETARG, each pmlogger instance will automatically be
launched with the following arguments: -c, -h, -l, -x and the
basename for the PCP archive log.
4. To commence the recording session, call pmRecordControl with a
request of PM_REC_ON, and rhp must be NULL. This will launch one
pmlogger(1) process for each host in the recording session, and
initialize the fd_ipc, logfile, pid and status fields in the
associated pmRecordHost structure(s).
5. To terminate a pmlogger instance identified by rhp, call
pmRecordControl with a request of PM_REC_OFF. If the rhp
argument to pmRecordControl is NULL, the termination request is
broadcast to all pmlogger processes in the current recording
session.
An informative dialog is generated directly by each pmlogger
process and hence note the comments on the disposition of output
from pmlogger below.
Alternatively, pmlogger can be started with options to limit the
duration of logging, e.g. the -T or -s arguments, in which case
there is no need to call pmRecordControl with a request of
PM_REC_OFF and no dialog is generated.
6. To display the current status of the pmlogger instance identified
by rhp, call pmRecordControl with a request of PM_REC_STATUS. If
the rhp argument to pmRecordControl is NULL, the status request
is broadcast to all pmlogger processes in the current recording
session.
The display is generated directly by each pmlogger process and
hence note the comments on the disposition of output from
pmlogger below.
7. To detach a pmlogger instance identified by rhp and allow it to
continue independent of the application that launched the
recording session, call pmRecordControl with a request of
PM_REC_DETACH. If the rhp argument to pmRecordControl is NULL,
the detach request is broadcast to all pmlogger processes in the
current recording session.
An informative dialog is generated directly by each pmlogger
process and hence note the comments on the disposition of output
from pmlogger below.
The calling application should not close any of the returned stdio
streams; this will be done by pmRecordControl when recording is
commenced.
Once pmlogger has been started for a recording session, then pmlogger
will assume responsibility for any dialog with the user in the event
that the application that launched the recording session should exit,
particularly without terminating the recording session.
By default, information and dialogs from pmlogger will be displayed
using pmquery(1) on the assumption that most applications wishing to
launch a recording session are GUI-based. In the event that pmquery
fails to display the information (for example, because the DISPLAY
environment variable is not set), pmlogger will write on its own
stderr stream (not the stderr stream of the launching process); the
output will be assigned to the XXXXXX.host.log file described in the
FILES section below. For convenience, the full pathname to this file
is provided via the logfile field in the pmRecordHost structure.
If the options argument to pmRecordControl is not NULL, this string
may be used to pass additional arguments to pmquery(1) in those cases
where a dialog is to be displayed. One use of this capability would
be to provide a -geometry string to control the placement of the
dialog.
Premature termination of a launched pmlogger process may be
determined using the pmRecordHost structure, by calling select(2) on
the fd_ipc field or polling the status field that will contain the
termination status from waitpid(2) if known, else -1.
pmafm(1), pmlogger(1), pmquery(1) and PMAPI(3).
These routines create a number of files in the same directory as the
folio file named in the call to pmRecordSetup. In all cases, the
``XXXXXX'' component is the result of calling mktemp(3).
XXXXXX If replay is non-zero, this is the creator's replay
configuration file, else an empty control file, used to
guarantee uniqueness.
folio The PCP Archive Folio, suitable for use with pmafm(1).
XXXXXX.host.config
The pmlogger(1) configuration for each host - if the same
host is used in different calls to pmRecordAddHost within
the same recording session then one of the letters ``a''
through ``z'' will be appended to the ``XXXXXX'' part of
all associated file names to ensure uniqueness.
XXXXXX.host.log
stdout and stderr for the pmlogger(1) instance for each
host.
XXXXXX.host.{0,meta,index}
The files comprising a single PCP archive for each host.
pmRecordSetup may return NULL in the event of an error. Check errno
for the real cause, but the value EINVAL typically means that the
order of calls to these routines is not correct (there is obvious
state associated with the current recording session that is
maintained across calls to these routines). For example the
following calls would produce this EINVAL error; calling
pmRecordControl before calling pmRecordAddHost at least once, or
calling pmRecordAddHost before calling pmRecordSetup.
pmRecordControl and pmRecordAddHost both return 0 on success, else a
value less than 0 suitable for decoding with pmErrStr(3) on failure.
The value -EINVAL has the same interpretation as errno being set to
EINVAL as described above.
pmRecordControl will return PM_ERR_IPC if the associated pmlogger
process has already exited.
This page is part of the PCP (Performance Co-Pilot) project.
Information about the project can be found at ⟨http://www.pcp.io/⟩.
If you have a bug report for this manual page, send it to
pcp@oss.sgi.com. This page was obtained from the project's upstream
Git repository ⟨git://git.pcp.io/pcp⟩ on 2017-07-05. If you discover
any rendering problems in this HTML version of the page, or you
believe there is a better or more up-to-date source for the page, or
you have corrections or improvements to the information in this
COLOPHON (which is not part of the original manual page), send a mail
to man-pages@man7.org
Performance Co-Pilot PCP PMAFM(3)
Pages that refer to this page: pmafm(1), pmnewlog(1)