|
NAME | SYNOPSIS | DESCRIPTION | BACKWARDS COMPATIBILITY | SEE ALSO | AUTHORS | BUGS | COLOPHON |
PCAP(3PCAP) PCAP(3PCAP)
pcap - Packet Capture library
#include <pcap/pcap.h>
The Packet Capture library provides a high level interface to packet
capture systems. All packets on the network, even those destined for
other hosts, are accessible through this mechanism. It also supports
saving captured packets to a ``savefile'', and reading packets from a
``savefile''.
Opening a capture handle for reading
To open a handle for a live capture, given the name of the network or
other interface on which the capture should be done, call
pcap_create(), set the appropriate options on the handle, and then
activate it with pcap_activate().
To obtain a list of devices that can be opened for a live capture,
call pcap_findalldevs(); to free the list returned by
pcap_findalldevs(), call pcap_freealldevs(). pcap_lookupdev() will
return the first device on that list that is not a ``loopback``
network interface.
To open a handle for a ``savefile'' from which to read packets, given
the pathname of the ``savefile'', call pcap_open_offline(); to set up
a handle for a ``savefile'', given a FILE * referring to a file
already opened for reading, call pcap_fopen_offline().
In order to get a ``fake'' pcap_t for use in routines that require a
pcap_t as an argument, such as routines to open a ``savefile'' for
writing and to compile a filter expression, call pcap_open_dead().
pcap_create(), pcap_open_offline(), pcap_fopen_offline(), and
pcap_open_dead() return a pointer to a pcap_t, which is the handle
used for reading packets from the capture stream or the ``savefile'',
and for finding out information about the capture stream or
``savefile''. To close a handle, use pcap_close().
The options that can be set on a capture handle include
snapshot length
If, when capturing, you capture the entire contents of the
packet, that requires more CPU time to copy the packet to your
application, more disk and possibly network bandwidth to write
the packet data to a file, and more disk space to save the
packet. If you don't need the entire contents of the packet -
for example, if you are only interested in the TCP headers of
packets - you can set the "snapshot length" for the capture to
an appropriate value. If the snapshot length is set to
snaplen, and snaplen is less than the size of a packet that is
captured, only the first snaplen bytes of that packet will be
captured and provided as packet data.
A snapshot length of 65535 should be sufficient, on most if
not all networks, to capture all the data available from the
packet.
The snapshot length is set with pcap_set_snaplen().
promiscuous mode
On broadcast LANs such as Ethernet, if the network isn't
switched, or if the adapter is connected to a "mirror port" on
a switch to which all packets passing through the switch are
sent, a network adapter receives all packets on the LAN,
including unicast or multicast packets not sent to a network
address that the network adapter isn't configured to
recognize.
Normally, the adapter will discard those packets; however,
many network adapters support "promiscuous mode", which is a
mode in which all packets, even if they are not sent to an
address that the adapter recognizes, are provided to the host.
This is useful for passively capturing traffic between two or
more other hosts for analysis.
Note that even if an application does not set promiscuous
mode, the adapter could well be in promiscuous mode for some
other reason.
For now, this doesn't work on the "any" device; if an argument
of "any" or NULL is supplied, the setting of promiscuous mode
is ignored.
Promiscuous mode is set with pcap_set_promisc().
monitor mode
On IEEE 802.11 wireless LANs, even if an adapter is in
promiscuous mode, it will supply to the host only frames for
the network with which it's associated. It might also supply
only data frames, not management or control frames, and might
not provide the 802.11 header or radio information pseudo-
header for those frames.
In "monitor mode", sometimes also called "rfmon mode" (for
"Radio Frequency MONitor"), the adapter will supply all frames
that it receives, with 802.11 headers, and might supply a
pseudo-header with radio information about the frame as well.
Note that in monitor mode the adapter might disassociate from
the network with which it's associated, so that you will not
be able to use any wireless networks with that adapter. This
could prevent accessing files on a network server, or
resolving host names or network addresses, if you are
capturing in monitor mode and are not connected to another
network with another adapter.
Monitor mode is set with pcap_set_rfmon(), and
pcap_can_set_rfmon() can be used to determine whether an
adapter can be put into monitor mode.
packet buffer timeout
If, when capturing, packets are delivered as soon as they
arrive, the application capturing the packets will be woken up
for each packet as it arrives, and might have to make one or
more calls to the operating system to fetch each packet.
If, instead, packets are not delivered as soon as they arrive,
but are delivered after a short delay (called a "packet buffer
timeout"), more than one packet can be accumulated before the
packets are delivered, so that a single wakeup would be done
for multiple packets, and each set of calls made to the
operating system would supply multiple packets, rather than a
single packet. This reduces the per-packet CPU overhead if
packets are arriving at a high rate, increasing the number of
packets per second that can be captured.
The packet buffer timeout is required so that an application
won't wait for the operating system's capture buffer to fill
up before packets are delivered; if packets are arriving
slowly, that wait could take an arbitrarily long period of
time.
Not all platforms support a packet buffer timeout; on
platforms that don't, the packet buffer timeout is ignored. A
zero value for the timeout, on platforms that support a packet
buffer timeout, will cause a read to wait forever to allow
enough packets to arrive, with no timeout.
NOTE: the packet buffer timeout cannot be used to cause calls
that read packets to return within a limited period of time,
because, on some platforms, the packet buffer timeout isn't
supported, and, on other platforms, the timer doesn't start
until at least one packet arrives. This means that the packet
buffer timeout should NOT be used, for example, in an
interactive application to allow the packet capture loop to
``poll'' for user input periodically, as there's no guarantee
that a call reading packets will return after the timeout
expires even if no packets have arrived.
The packet buffer timeout is set with pcap_set_timeout().
buffer size
Packets that arrive for a capture are stored in a buffer, so
that they do not have to be read by the application as soon as
they arrive. On some platforms, the buffer's size can be set;
a size that's too small could mean that, if too many packets
are being captured and the snapshot length doesn't limit the
amount of data that's buffered, packets could be dropped if
the buffer fills up before the application can read packets
from it, while a size that's too large could use more non-
pageable operating system memory than is necessary to prevent
packets from being dropped.
The buffer size is set with pcap_set_buffer_size().
timestamp type
On some platforms, the time stamp given to packets on live
captures can come from different sources that can have
different resolutions or that can have different relationships
to the time values for the current time supplied by routines
on the native operating system. See pcap-tstamp(7) for a list
of time stamp types.
The time stamp type is set with pcap_set_tstamp_type().
Reading packets from a network interface may require that you have
special privileges:
Under SunOS 3.x or 4.x with NIT or BPF:
You must have read access to /dev/nit or /dev/bpf*.
Under Solaris with DLPI:
You must have read/write access to the network pseudo device,
e.g. /dev/le. On at least some versions of Solaris, however,
this is not sufficient to allow tcpdump to capture in
promiscuous mode; on those versions of Solaris, you must be
root, or the application capturing packets must be installed
setuid to root, in order to capture in promiscuous mode. Note
that, on many (perhaps all) interfaces, if you don't capture
in promiscuous mode, you will not see any outgoing packets, so
a capture not done in promiscuous mode may not be very useful.
In newer versions of Solaris, you must have been given the
net_rawaccess privilege; this is both necessary and sufficient
to give you access to the network pseudo-device - there is no
need to change the privileges on that device. A user can be
given that privilege by, for example, adding that privilege to
the user's defaultpriv key with the usermod(8) command.
Under HP-UX with DLPI:
You must be root or the application capturing packets must be
installed setuid to root.
Under IRIX with snoop:
You must be root or the application capturing packets must be
installed setuid to root.
Under Linux:
You must be root or the application capturing packets must be
installed setuid to root (unless your distribution has a
kernel that supports capability bits such as CAP_NET_RAW and
code to allow those capability bits to be given to particular
accounts and to cause those bits to be set on a user's initial
processes when they log in, in which case you must have
CAP_NET_RAW in order to capture and CAP_NET_ADMIN to enumerate
network devices with, for example, the -D flag).
Under ULTRIX and Digital UNIX/Tru64 UNIX:
Any user may capture network traffic. However, no user (not
even the super-user) can capture in promiscuous mode on an
interface unless the super-user has enabled promiscuous-mode
operation on that interface using pfconfig(8), and no user
(not even the super-user) can capture unicast traffic received
by or sent by the machine on an interface unless the super-
user has enabled copy-all-mode operation on that interface
using pfconfig, so useful packet capture on an interface
probably requires that either promiscuous-mode or copy-all-
mode operation, or both modes of operation, be enabled on that
interface.
Under BSD (this includes Mac OS X):
You must have read access to /dev/bpf* on systems that don't
have a cloning BPF device, or to /dev/bpf on systems that do.
On BSDs with a devfs (this includes Mac OS X), this might
involve more than just having somebody with super-user access
setting the ownership or permissions on the BPF devices - it
might involve configuring devfs to set the ownership or
permissions every time the system is booted, if the system
even supports that; if it doesn't support that, you might have
to find some other way to make that happen at boot time.
Reading a saved packet file doesn't require special privileges.
The packets read from the handle may include a ``pseudo-header''
containing various forms of packet meta-data, and probably includes a
link-layer header whose contents can differ for different network
interfaces. To determine the format of the packets supplied by the
handle, call pcap_datalink(); http://www.tcpdump.org/linktypes.html
lists the values it returns and describes the packet formats that
correspond to those values.
Do NOT assume that the packets for a given capture or ``savefile``
will have any given link-layer header type, such as DLT_EN10MB for
Ethernet. For example, the "any" device on Linux will have a link-
layer header type of DLT_LINUX_SLL even if all devices on the system
at the time the "any" device is opened have some other data link
type, such as DLT_EN10MB for Ethernet.
To obtain the FILE * corresponding to a pcap_t opened for a
``savefile'', call pcap_file().
Routines
pcap_create(3PCAP)
get a pcap_t for live capture
pcap_activate(3PCAP)
activate a pcap_t for live capture
pcap_findalldevs(3PCAP)
get a list of devices that can be opened for a live
capture
pcap_freealldevs(3PCAP)
free list of devices
pcap_lookupdev(3PCAP)
get first non-loopback device on that list
pcap_open_offline(3PCAP)
open a pcap_t for a ``savefile'', given a pathname
pcap_open_offline_with_tstamp_precision(3PCAP)
open a pcap_t for a ``savefile'', given a pathname, and
specify the precision to provide for packet time stamps
pcap_fopen_offline(3PCAP)
open a pcap_t for a ``savefile'', given a FILE *
pcap_fopen_offline_with_tstamp_precision(3PCAP)
open a pcap_t for a ``savefile'', given a FILE *, and
specify the precision to provide for packet time stamps
pcap_open_dead(3PCAP)
create a ``fake'' pcap_t
pcap_close(3PCAP)
close a pcap_t
pcap_set_snaplen(3PCAP)
set the snapshot length for a not-yet-activated pcap_t
for live capture
pcap_snapshot(3PCAP)
get the snapshot length for a pcap_t
pcap_set_promisc(3PCAP)
set promiscuous mode for a not-yet-activated pcap_t for
live capture
pcap_set_rfmon(3PCAP)
set monitor mode for a not-yet-activated pcap_t for
live capture
pcap_can_set_rfmon(3PCAP)
determine whether monitor mode can be set for a pcap_t
for live capture
pcap_set_timeout(3PCAP)
set packet buffer timeout for a not-yet-activated
pcap_t for live capture
pcap_set_buffer_size(3PCAP)
set buffer size for a not-yet-activated pcap_t for live
capture
pcap_set_tstamp_type(3PCAP)
set time stamp type for a not-yet-activated pcap_t for
live capture
pcap_list_tstamp_types(3PCAP)
get list of available time stamp types for a not-yet-
activated pcap_t for live capture
pcap_free_tstamp_types(3PCAP)
free list of available time stamp types
pcap_tstamp_type_val_to_name(3PCAP)
get name for a time stamp type
pcap_tstamp_type_val_to_description(3PCAP)
get description for a time stamp type
pcap_tstamp_type_name_to_val(3PCAP)
get time stamp type corresponding to a name
pcap_set_tstamp_precision(3PCAP)
set time stamp precision for a not-yet-activated pcap_t
for live capture
pcap_get_tstamp_precision(3PCAP)
get the time stamp precision of a pcap_t for live
capture
pcap_datalink(3PCAP)
get link-layer header type for a pcap_t
pcap_file(3PCAP)
get the FILE * for a pcap_t opened for a ``savefile''
pcap_is_swapped(3PCAP)
determine whether a ``savefile'' being read came from a
machine with the opposite byte order
pcap_major_version(3PCAP)
pcap_minor_version(3PCAP)
get the major and minor version of the file format
version for a ``savefile''
Selecting a link-layer header type for a live capture
Some devices may provide more than one link-layer header type. To
obtain a list of all link-layer header types provided by a device,
call pcap_list_datalinks() on an activated pcap_t for the device. To
free a list of link-layer header types, call pcap_free_datalinks().
To set the link-layer header type for a device, call
pcap_set_datalink(). This should be done after the device has been
activated but before any packets are read and before any filters are
compiled or installed.
Routines
pcap_list_datalinks(3PCAP)
get a list of link-layer header types for a device
pcap_free_datalinks(3PCAP)
free list of link-layer header types
pcap_set_datalink(3PCAP)
set link-layer header type for a device
pcap_datalink_val_to_name(3PCAP)
get name for a link-layer header type
pcap_datalink_val_to_description(3PCAP)
get description for a link-layer header type
pcap_datalink_name_to_val(3PCAP)
get link-layer header type corresponding to a name
Reading packets
Packets are read with pcap_dispatch() or pcap_loop(), which process
one or more packets, calling a callback routine for each packet, or
with pcap_next() or pcap_next_ex(), which return the next packet.
The callback for pcap_dispatch() and pcap_loop() is supplied a
pointer to a struct pcap_pkthdr, which includes the following
members:
ts a struct timeval containing the time when the packet
was captured
caplen a bpf_u_int32 giving the number of bytes of the packet
that are available from the capture
len a bpf_u_int32 giving the length of the packet, in bytes
(which might be more than the number of bytes available
from the capture, if the length of the packet is larger
than the maximum number of bytes to capture).
The callback is also supplied a const u_char pointer to the first
caplen (as given in the struct pcap_pkthdr mentioned above) bytes of
data from the packet. This won't necessarily be the entire packet;
to capture the entire packet, you will have to provide a value for
snaplen in your call to pcap_set_snaplen() that is sufficiently large
to get all of the packet's data - a value of 65535 should be
sufficient on most if not all networks). When reading from a
``savefile'', the snapshot length specified when the capture was
performed will limit the amount of packet data available.
pcap_next() is passed an argument that points to a struct pcap_pkthdr
structure, and fills it in with the time stamp and length values for
the packet. It returns a const u_char to the first caplen bytes of
the packet on success, and NULL on error.
pcap_next_ex() is passed two pointer arguments, one of which points
to a structpcap_pkthdr* and one of which points to a const u_char*.
It sets the first pointer to point to a struct pcap_pkthdr structure
with the time stamp and length values for the packet, and sets the
second pointer to point to the first caplen bytes of the packet.
To force the loop in pcap_dispatch() or pcap_loop() to terminate,
call pcap_breakloop().
By default, when reading packets from an interface opened for a live
capture, pcap_dispatch(), pcap_next(), and pcap_next_ex() will, if no
packets are currently available to be read, block waiting for packets
to become available. On some, but not all, platforms, if a packet
buffer timeout was specified, the wait will terminate after the
packet buffer timeout expires; applications should be prepared for
this, as it happens on some platforms, but should not rely on it, as
it does not happen on other platforms. Note that the wait might, or
might not, terminate even if no packets are available; applications
should be prepared for this to happen, but must not rely on it
happening.
A handle can be put into ``non-blocking mode'', so that those
routines will, rather than blocking, return an indication that no
packets are available to read. Call pcap_setnonblock() to put a
handle into non-blocking mode or to take it out of non-blocking mode;
call pcap_getnonblock() to determine whether a handle is in non-
blocking mode. Note that non-blocking mode does not work correctly
in Mac OS X 10.6.
Non-blocking mode is often combined with routines such as select(2)
or poll(2) or other routines a platform offers to wait for any of a
set of descriptors to be ready to read. To obtain, for a handle, a
descriptor that can be used in those routines, call
pcap_get_selectable_fd(). Not all handles have such a descriptor
available; pcap_get_selectable_fd() will return -1 if no such
descriptor exists. In addition, for various reasons, one or more of
those routines will not work properly with the descriptor; the
documentation for pcap_get_selectable_fd() gives details. Note that,
just as an attempt to read packets from a pcap_t may not return any
packets if the packet buffer timeout expires, a select(), poll(), or
other such call may, if the packet buffer timeout expires, indicate
that a descriptor is ready to read even if there are no packets
available to read.
Routines
pcap_dispatch(3PCAP)
read a bufferful of packets from a pcap_t open for a
live capture or the full set of packets from a pcap_t
open for a ``savefile''
pcap_loop(3PCAP)
read packets from a pcap_t until an interrupt or error
occurs
pcap_next(3PCAP)
read the next packet from a pcap_t without an
indication whether an error occurred
pcap_next_ex(3PCAP)
read the next packet from a pcap_t with an error
indication on an error
pcap_breakloop(3PCAP)
prematurely terminate the loop in pcap_dispatch() or
pcap_loop()
pcap_setnonblock(3PCAP)
set or clear non-blocking mode on a pcap_t
pcap_getnonblock(3PCAP)
get the state of non-blocking mode for a pcap_t
pcap_get_selectable_fd(3PCAP)
attempt to get a descriptor for a pcap_t that can be
used in calls such as select(2) and poll(2)
Filters
In order to cause only certain packets to be returned when reading
packets, a filter can be set on a handle. For a live capture, the
filtering will be performed in kernel mode, if possible, to avoid
copying ``uninteresting'' packets from the kernel to user mode.
A filter can be specified as a text string; the syntax and semantics
of the string are as described by pcap-filter(7). A filter string is
compiled into a program in a pseudo-machine-language by
pcap_compile() and the resulting program can be made a filter for a
handle with pcap_setfilter(). The result of pcap_compile() can be
freed with a call to pcap_freecode(). pcap_compile() may require a
network mask for certain expressions in the filter string;
pcap_lookupnet() can be used to find the network address and network
mask for a given capture device.
A compiled filter can also be applied directly to a packet that has
been read using pcap_offline_filter().
Routines
pcap_compile(3PCAP)
compile filter expression to a pseudo-machine-language
code program
pcap_freecode(3PCAP)
free a filter program
pcap_setfilter(3PCAP)
set filter for a pcap_t
pcap_lookupnet(3PCAP)
get network address and network mask for a capture
device
pcap_offline_filter(3PCAP)
apply a filter program to a packet
Incoming and outgoing packets
By default, libpcap will attempt to capture both packets sent by the
machine and packets received by the machine. To limit it to
capturing only packets received by the machine or, if possible, only
packets sent by the machine, call pcap_setdirection().
Routines
pcap_setdirection(3PCAP)
specify whether to capture incoming packets, outgoing
packets, or both
Capture statistics
To get statistics about packets received and dropped in a live
capture, call pcap_stats().
Routines
pcap_stats(3PCAP)
get capture statistics
Opening a handle for writing captured packets
To open a ``savefile`` to which to write packets, given the pathname
the ``savefile'' should have, call pcap_dump_open(). To open a
``savefile`` to which to write packets, given the pathname the
``savefile'' should have, call pcap_dump_open(); to set up a handle
for a ``savefile'', given a FILE * referring to a file already opened
for writing, call pcap_dump_fopen(). They each return pointers to a
pcap_dumper_t, which is the handle used for writing packets to the
``savefile''. If it succeeds, it will have created the file if it
doesn't exist and truncated the file if it does exist. To close a
pcap_dumper_t, call pcap_dump_close().
Routines
pcap_dump_open(3PCAP)
open a pcap_dumper_t for a ``savefile``, given a
pathname
pcap_dump_fopen(3PCAP)
open a pcap_dumper_t for a ``savefile``, given a FILE *
pcap_dump_close(3PCAP)
close a pcap_dumper_t
pcap_dump_file(3PCAP)
get the FILE * for a pcap_dumper_t opened for a
``savefile''
Writing packets
To write a packet to a pcap_dumper_t, call pcap_dump(). Packets
written with pcap_dump() may be buffered, rather than being
immediately written to the ``savefile''. Closing the pcap_dumper_t
will cause all buffered-but-not-yet-written packets to be written to
the ``savefile''. To force all packets written to the pcap_dumper_t,
and not yet written to the ``savefile'' because they're buffered by
the pcap_dumper_t, to be written to the ``savefile'', without closing
the pcap_dumper_t, call pcap_dump_flush().
Routines
pcap_dump(3PCAP)
write packet to a pcap_dumper_t
pcap_dump_flush(3PCAP)
flush buffered packets written to a pcap_dumper_t to
the ``savefile''
pcap_dump_ftell(3PCAP)
get current file position for a pcap_dumper_t
Injecting packets
If you have the required privileges, you can inject packets onto a
network with a pcap_t for a live capture, using pcap_inject() or
pcap_sendpacket(). (The two routines exist for compatibility with
both OpenBSD and WinPcap; they perform the same function, but have
different return values.)
Routines
pcap_inject(3PCAP)
pcap_sendpacket(3PCAP)
transmit a packet
Reporting errors
Some routines return error or warning status codes; to convert them
to a string, use pcap_statustostr().
Routines
pcap_statustostr(3PCAP)
get a string for an error or warning status code
Getting library version information
To get a string giving version information about libpcap, call
pcap_lib_version().
Routines
pcap_lib_version(3PCAP)
get library version string
In versions of libpcap prior to 1.0, the pcap.h header file was not
in a pcap directory on most platforms; if you are writing an
application that must work on versions of libpcap prior to 1.0,
include <pcap.h>, which will include <pcap/pcap.h> for you, rather
than including <pcap/pcap.h>.
pcap_create() and pcap_activate() were not available in versions of
libpcap prior to 1.0; if you are writing an application that must
work on versions of libpcap prior to 1.0, either use pcap_open_live()
to get a handle for a live capture or, if you want to be able to use
the additional capabilities offered by using pcap_create() and
pcap_activate(), use an autoconf(1) script or some other
configuration script to check whether the libpcap 1.0 APIs are
available and use them only if they are.
autoconf(1), tcpdump(1), tcpslice(1), pcap-filter(7), pfconfig(8),
usermod(8)
The original authors of libpcap are:
Van Jacobson, Craig Leres and Steven McCanne, all of the Lawrence
Berkeley National Laboratory, University of California, Berkeley, CA.
The current version is available from "The Tcpdump Group"'s Web site
at
http://www.tcpdump.org/
To report a security issue please send an e-mail to
security@tcpdump.org.
To report bugs and other problems, contribute patches, request a
feature, provide generic feedback etc please see the file
CONTRIBUTING in the libpcap source tree root.
This page is part of the libpcap (packet capture library) project.
Information about the project can be found at
⟨http://www.tcpdump.org/⟩. If you have a bug report for this manual
page, see ⟨http://www.tcpdump.org/#patches⟩. This page was obtained
from the project's upstream Git repository
⟨https://github.com/the-tcpdump-group/libpcap.git⟩ on 2017-07-05. If
you discover any rendering problems in this HTML version of the page,
or you believe there is a better or more up-to-date source for the
page, or you have corrections or improvements to the information in
this COLOPHON (which is not part of the original manual page), send a
mail to man-pages@man7.org
20 January 2017 PCAP(3PCAP)