|
NAME | SYNOPSIS | DESCRIPTION | QUILT COMMANDS REFERENCE | COMMON OPTIONS TO ALL COMMANDS | EXIT STATUS | EXAMPLE OF WORKING TREE | EXAMPLE | CONFIGURATION FILE | AUTHORS | SEE ALSO | COLOPHON |
quilt(1) General Commands Manual quilt(1)
quilt - tool to manage series of patches
quilt [-h] command [options]
Quilt is a tool to manage large sets of patches by keeping track of
the changes each patch makes. Patches can be applied, un-applied,
refreshed, etc. The key philosophical concept is that your primary
output is patches.
With quilt, all work occurs within a single directory tree. Commands
can be invoked from anywhere within the source tree. They are of the
form quilt cmd similar to CVS, svn or git commands. They can be
abbreviated as long as the specified part of the command is unique.
All commands print some help text with quilt cmd -h.
Quilt manages a stack of patches. Patches are applied incrementally
on top of the base tree plus all preceding patches. They can be
pushed on top of the stack (quilt push), and popped off the stack
(quilt pop). Commands are available for querying the contents of the
series file (quilt series, see below), the contents of the stack
(quilt applied, quilt previous, quilt top), and the patches that are
not applied at a particular moment (quilt next, quilt unapplied). By
default, most commands apply to the topmost patch on the stack.
Patch files are located in the patches sub-directory of the source
tree (see EXAMPLE OF WORKING TREE below). The QUILT_PATCHES
environment variable can be used to override this location. When not
found in the current directory, that subdirectory is searched
recursively in the parent directories (this is similar to the way git
searches for its configuration files). The patches directory may
contain sub-directories. It may also be a symbolic link instead of a
directory.
A file called series contains a list of patch file names that defines
the order in which patches are applied. Unless there are means by
which series files can be generated automatically, it is usually
provided along with a set of patches. In this file, each patch file
name is on a separate line. Patch files are identified by path names
that are relative to the patches directory; patches may be in sub-
directories below this directory. Lines in the series file that start
with a hash character (#) are ignored. You can also add a comment
after each patch file name, introduced by a space followed by a hash
character. When quilt adds, removes, or renames patches, it
automatically updates the series file. Users of quilt can modify
series files while some patches are applied, as long as the applied
patches remain in their original order.
Different series files can be used to assemble patches in different
ways, corresponding for example to different development branches.
Before a patch is applied (or ``pushed on the stack''), copies of all
files the patch modifies are saved to the .pc/patch directory. The
patch is added to the list of currently applied patches (.pc/applied-
patches). Later when a patch is regenerated (quilt refresh), the
backup copies in .pc/patch are compared with the current versions of
the files in the source tree using GNU diff.
Documentation related to a patch can be put at the beginning of a
patch file. Quilt is careful to preserve all text that precedes the
actual patch when doing a refresh. (This is limited to patches in
unified format; see diff documentation).
The series file is looked up in the .pc directory, in the root of the
source tree, and in the patches directory. The first series file
that is found is used. This may also be a symbolic link, or a file
with multiple hard links. Usually, only one series file is used for
a set of patches, so the patches sub-directory is a convenient
location.
The .pc directory and its sub-directories cannot be relocated, but it
can be a symbolic link. While patches are applied to the source tree,
this directory is essential for many operations, including taking
patches off the stack (quilt pop), and refreshing patches (quilt
refresh). Files in the .pc directory are automatically removed when
they are no longer needed, so there is no need to clean up manually.
add [-P patch] {file} ...
Add one or more files to the topmost or named patch. Files must
be added to the patch before being modified. Files that are
modified by patches already applied on top of the specified patch
cannot be added.
-P patch
Patch to add files to.
annotate [-P patch] {file}
Print an annotated listing of the specified file showing which
patches modify which lines. Only applied patches are included.
-P patch
Stop checking for changes at the specified rather than the
topmost patch.
applied [patch]
Print a list of applied patches, or all patches up to and
including the specified patch in the file series.
delete [-r] [--backup] [patch|-n]
Remove the specified or topmost patch from the series file. If
the patch is applied, quilt will attempt to remove it first.
(Only the topmost patch can be removed right now.)
-n Delete the next patch after topmost, rather than the
specified or topmost patch.
-r Remove the deleted patch file from the patches directory as
well.
--backup
Rename the patch file to patch~ rather than deleting it.
Ignored if not used with `-r'.
diff [-p n|-p ab] [-u|-U num|-c|-C num] [--combine patch|-z] [-R] [-P
patch] [--snapshot] [--diff=utility] [--no-timestamps] [--no-index]
[--sort] [--color[=always|auto|never]] [file ...]
Produces a diff of the specified file(s) in the topmost or
specified patch. If no files are specified, all files that are
modified are included.
-p n
Create a -p n style patch (-p0 or -p1 are supported).
-p ab
Create a -p1 style patch, but use a/file and b/file as the
original and new filenames instead of the default
dir.orig/file and dir/file names.
-u, -U num, -c, -C num
Create a unified diff (-u, -U) with num lines of context.
Create a context diff (-c, -C) with num lines of context. The
number of context lines defaults to 3.
--no-timestamps
Do not include file timestamps in patch headers.
--no-index
Do not output Index: lines.
-z Write to standard output the changes that have been made
relative to the topmost or specified patch.
-R Create a reverse diff.
-P patch
Create a diff for the specified patch. (Defaults to the
topmost patch.)
--combine patch
Create a combined diff for all patches between this patch and
the patch specified with -P. A patch name of `-' is
equivalent to specifying the first applied patch.
--snapshot
Diff against snapshot (see `quilt snapshot -h').
--diff=utility
Use the specified utility for generating the diff. The
utility is invoked with the original and new file name as
arguments.
--color[=always|auto|never]
Use syntax coloring (auto activates it only if the output is
a tty).
--sort
Sort files by their name instead of preserving the original
order.
edit file ...
Edit the specified file(s) in $EDITOR after adding it (them) to
the topmost patch.
files [-v] [-a] [-l] [--combine patch] [patch]
Print the list of files that the topmost or specified patch
changes.
-a List all files in all applied patches.
-l Add patch name to output.
-v Verbose, more user friendly output.
--combine patch
Create a listing for all patches between this patch and the
topmost or specified patch. A patch name of `-' is equivalent
to specifying the first applied patch.
fold [-R] [-q] [-f] [-p strip-level]
Integrate the patch read from standard input into the topmost
patch: After making sure that all files modified are part of the
topmost patch, the patch is applied with the specified strip
level (which defaults to 1).
-R Apply patch in reverse.
-q Quiet operation.
-f Force apply, even if the patch has rejects. Unless in quiet
mode, apply the patch interactively: the patch utility may
ask questions.
-p strip-level
The number of pathname components to strip from file names
when applying patchfile.
fork [new_name]
Fork the topmost patch. Forking a patch means creating a
verbatim copy of it under a new name, and use that new name
instead of the original one in the current series. This is
useful when a patch has to be modified, but the original version
of it should be preserved, e.g. because it is used in another
series, or for the history. A typical sequence of commands would
be: fork, edit, refresh.
If new_name is missing, the name of the forked patch will be the
current patch name, followed by `-2'. If the patch name already
ends in a dash-and-number, the number is further incremented
(e.g., patch.diff, patch-2.diff, patch-3.diff).
graph [--all] [--reduce] [--lines[=num]] [--edge-labels=files] [-T
ps] [patch]
Generate a dot(1) directed graph showing the dependencies between
applied patches. A patch depends on another patch if both touch
the same file or, with the --lines option, if their modifications
overlap. Unless otherwise specified, the graph includes all
patches that the topmost patch depends on. When a patch name is
specified, instead of the topmost patch, create a graph for the
specified patch. The graph will include all other patches that
this patch depends on, as well as all patches that depend on this
patch.
--all
Generate a graph including all applied patches and their
dependencies. (Unapplied patches are not included.)
--reduce
Eliminate transitive edges from the graph.
--lines[=num]
Compute dependencies by looking at the lines the patches
modify. Unless a different num is specified, two lines of
context are included.
--edge-labels=files
Label graph edges with the file names that the adjacent
patches modify.
-T ps
Directly produce a PostScript output file.
grep [-h|options] {pattern}
Grep through the source files, recursively, skipping patches and
quilt meta-information. If no filename argument is given, the
whole source tree is searched. Please see the grep(1) manual page
for options.
-h Print this help. The grep -h option can be passed after a
double-dash (--). Search expressions that start with a dash
can be passed after a second double-dash (-- --).
header [-a|-r|-e] [--backup] [--strip-diffstat] [--strip-trailing-
whitespace] [patch]
Print or change the header of the topmost or specified patch.
-a, -r, -e
Append to (-a) or replace (-r) the exiting patch header, or
edit (-e) the header in $EDITOR. If none of these options is
given, print the patch header.
--strip-diffstat
Strip diffstat output from the header.
--strip-trailing-whitespace
Strip trailing whitespace at the end of lines of the header.
--backup
Create a backup copy of the old version of a patch as patch~.
import [-p num] [-R] [-P patch] [-f] [-d {o|a|n}] patchfile ...
Import external patches. The patches will be inserted following
the current top patch, and must be pushed after import to apply
them.
-p num
Number of directory levels to strip when applying (default=1)
-R
Apply patch in reverse.
-P patch
Patch filename to use inside quilt. This option can only be
used when importing a single patch.
-f Overwrite/update existing patches.
-d {o|a|n}
When overwriting in existing patch, keep the old (o), all
(a), or new (n) patch header. If both patches include
headers, this option must be specified. This option is only
effective when -f is used.
mail {--mbox file|--send} [-m text] [-M file] [--prefix prefix]
[--sender ...] [--from ...] [--to ...] [--cc ...] [--bcc ...]
[--subject ...] [--reply-to message] [--charset ...] [--signature
file] [first_patch [last_patch]]
Create mail messages from a specified range of patches, or all
patches in the series file, and either store them in a mailbox
file, or send them immediately. The editor is opened with a
template for the introduction. Please see
/usr/local/share/doc/quilt/README.MAIL for details. When
specifying a range of patches, a first patch name of `-' denotes
the first, and a last patch name of `-' denotes the last patch in
the series.
-m text
Text to use as the text in the introduction. When this option
is used, the editor will not be invoked, and the patches will
be processed immediately.
-M file
Like the -m option, but read the introduction from file.
--prefix prefix
Use an alternate prefix in the bracketed part of the subjects
generated. Defaults to `patch'.
--mbox file
Store all messages in the specified file in mbox format. The
mbox can later be sent using formail, for example.
--send
Send the messages directly.
--sender
The envelope sender address to use. The address must be of
the form `user@domain.name'. No display name is allowed.
--from, --subject
The values for the From and Subject headers to use. If no
--from option is given, the value of the --sender option is
used.
--to, --cc, --bcc
Append a recipient to the To, Cc, or Bcc header.
--charset
Specify a particular message encoding on systems which don't
use UTF-8 or ISO-8859-15. This character encoding must match
the one used in the patches.
--signature file
Append the specified signature to messages (defaults to
~/.signature if found; use `-' for no signature).
--reply-to message
Add the appropriate headers to reply to the specified
message.
new [-p n|-p ab] {patchname}
Create a new patch with the specified file name, and insert it
after the topmost patch. The name can be prefixed with a sub-
directory name, allowing for grouping related patches together.
-p n
Create a -p n style patch (-p0 or -p1 are supported).
-p ab
Create a -p1 style patch, but use a/file and b/file as the
original and new filenames instead of the default
dir.orig/file and dir/file names.
Quilt can be used in sub-directories of a source tree. It
determines the root of a source tree by searching for a
patches directory above the current working directory. Create
a patches directory in the intended root directory if quilt
chooses a top-level directory that is too high up in the
directory tree.
next [patch]
Print the name of the next patch after the specified or topmost
patch in the series file.
patches [-v] [--color[=always|auto|never]] {file} [files...]
Print the list of patches that modify any of the specified files.
(Uses a heuristic to determine which files are modified by
unapplied patches. Note that this heuristic is much slower than
scanning applied patches.)
-v Verbose, more user friendly output.
--color[=always|auto|never]
Use syntax coloring (auto activates it only if the output is
a tty).
pop [-afRqv] [--refresh] [num|patch]
Remove patch(es) from the stack of applied patches. Without
options, the topmost patch is removed. When a number is
specified, remove the specified number of patches. When a patch
name is specified, remove patches until the specified patch end
up on top of the stack. Patch names may include the patches/
prefix, which means that filename completion can be used.
-a Remove all applied patches.
-f Force remove. The state before the patch(es) were applied
will be restored from backup files.
-R Always verify if the patch removes cleanly; don't rely on
timestamp checks.
-q Quiet operation.
-v Verbose operation.
--refresh
Automatically refresh every patch before it gets unapplied.
previous [patch]
Print the name of the previous patch before the specified or
topmost patch in the series file.
push [-afqvm] [--fuzz=N] [--merge[=merge|diff3]] [--leave-rejects]
[--color[=always|auto|never]] [--refresh] [num|patch]
Apply patch(es) from the series file. Without options, the next
patch in the series file is applied. When a number is specified,
apply the specified number of patches. When a patch name is
specified, apply all patches up to and including the specified
patch. Patch names may include the patches/ prefix, which means
that filename completion can be used.
-a Apply all patches in the series file.
-q Quiet operation.
-f Force apply, even if the patch has rejects.
-v Verbose operation.
--fuzz=N
Set the maximum fuzz factor (default: 2).
-m, --merge[=merge|diff3]
Merge the patch file into the original files (see patch(1)).
--leave-rejects
Leave around the reject files patch produced, even if the
patch is not actually applied.
--color[=always|auto|never]
Use syntax coloring (auto activates it only if the output is
a tty).
--refresh
Automatically refresh every patch after it was successfully
applied.
refresh [-p n|-p ab] [-u|-U num|-c|-C num] [-z[new_name]] [-f] [--no-
timestamps] [--no-index] [--diffstat] [--sort] [--backup] [--strip-
trailing-whitespace] [patch]
Refreshes the specified patch, or the topmost patch by default.
Documentation that comes before the actual patch in the patch
file is retained.
It is possible to refresh patches that are not on top. If any
patches on top of the patch to refresh modify the same files, the
script aborts by default. Patches can still be refreshed with
-f. In that case this script will print a warning for each
shadowed file, changes by more recent patches will be ignored,
and only changes in files that have not been modified by any more
recent patches will end up in the specified patch.
-p n
Create a -p n style patch (-p0 or -p1 supported).
-p ab
Create a -p1 style patch, but use a/file and b/file as the
original and new filenames instead of the default
dir.orig/file and dir/file names.
-u, -U num, -c, -C num
Create a unified diff (-u, -U) with num lines of context.
Create a context diff (-c, -C) with num lines of context. The
number of context lines defaults to 3.
-z[new_name]
Create a new patch containing the changes instead of
refreshing the topmost patch. If no new name is specified,
`-2' is added to the original patch name, etc. (See the fork
command.)
--no-timestamps
Do not include file timestamps in patch headers.
--no-index
Do not output Index: lines.
--diffstat
Add a diffstat section to the patch header, or replace the
existing diffstat section.
-f Enforce refreshing of a patch that is not on top.
--backup
Create a backup copy of the old version of a patch as patch~.
--sort
Sort files by their name instead of preserving the original
order.
--strip-trailing-whitespace
Strip trailing whitespace at the end of lines.
remove [-P patch] {file} ...
Remove one or more files from the topmost or named patch. Files
that are modified by patches on top of the specified patch cannot
be removed.
-P patch
Remove named files from the named patch.
rename [-P patch] new_name
Rename the topmost or named patch.
-P patch
Patch to rename.
revert [-P patch] {file} ...
Revert uncommitted changes to the topmost or named patch for the
specified file(s): after the revert, 'quilt diff -z' will show no
differences for those files. Changes to files that are modified
by patches on top of the specified patch cannot be reverted.
-P patch
Revert changes in the named patch.
series [--color[=always|auto|never]] [-v]
Print the names of all patches in the series file.
--color[=always|auto|never]
Use syntax coloring (auto activates it only if the output is
a tty).
-v Verbose, more user friendly output.
setup [-d path-prefix] [-v] [--sourcedir dir] [--fuzz=N]
[--slow|--fast] {specfile|seriesfile}
Initializes a source tree from an rpm spec file or a quilt series
file.
-d Optional path prefix for the resulting source tree.
--sourcedir
Directory that contains the package sources. Defaults to `.'.
-v Verbose debug output.
--fuzz=N
Set the maximum fuzz factor (needs rpm 4.6 or later).
--slow
Use the original, slow method to process the spec file. This
is the default for now, but that might change in the future.
In this mode, rpmbuild generates a working tree in a
temporary directory while all its actions are recorded, and
then everything is replayed from scratch in the target
directory.
--fast
Use an alternative, faster method to process the spec file.
In this mode, rpmbuild is told to generate a working tree
directly in the target directory. If the input is a series
file, it is assumed that all archives have been extracted
manually beforehand.
snapshot [-d]
Take a snapshot of the current working state. After taking the
snapshot, the tree can be modified in the usual ways, including
pushing and popping patches. A diff against the tree at the
moment of the snapshot can be generated with `quilt diff
--snapshot'.
-d Only remove current snapshot.
top
Print the name of the topmost patch on the current stack of
applied patches.
unapplied [patch]
Print a list of patches that are not applied, or all patches that
follow the specified patch in the series file.
upgrade
Upgrade the meta-data in a working tree from an old version of
quilt to the current version. This command is only needed when
the quilt meta-data format has changed, and the working tree
still contains old-format meta-data. In that case, quilt will
request to run `quilt upgrade'.
--trace
Runs the command in bash trace mode (-x). For internal
debugging.
--quiltrc file
Use the specified configuration file instead of ~/.quiltrc
(or /etc/quilt.quiltrc if ~/.quiltrc does not exist). See
the pdf documentation for details about its possible
contents. The special value "-" causes quilt not to read any
configuration file.
--version
Print the version number and exit immediately.
The exit status is 0 if the sub-command was successfully executed,
and 1 in case of error.
An exit status of 2 denotes that quilt did not do anything to
complete the command. This happens in particular when asking to push
when the whole stack is already pushed, or asking to pop when the
whole stack is already popped. This behavior is intended to ease the
scripting around quilt.
work/
├── patches/
│ ├── series (list of patches to apply)
│ ├── patch1.diff (one particular patch)
│ ├── patch2.diff
│ └── ...
├── .pc/
│ ├── .quilt_patches (content of QUILT_PATCHES)
│ ├── .quilt_series (content of QUILT_SERIES)
│ ├── patch1.diff/ (copy of patched files)
│ │ └── ...
│ ├── patch2.diff/
│ │ └── ...
│ └── ...
└── ...
The patches/ directory is precious as it contains all your patches as
well as the order in which it should be applied.
The .pc/ directory contains some metadata about the current state of
your patch serie. Changing its content is not advised. This directory
can usually be regenerated from the initial files and the content of
the patches/ directory (provided that all patches were regenerated
before the removal).
Please refer to the pdf documentation for a full example of use.
Upon startup, quilt evaluates the file .quiltrc in the user's home
directory, or the file specified with the --quiltrc option. This
file is a regular bash script. Default options can be passed to any
COMMAND by defining a QUILT_${COMMAND}_ARGS variable. For example,
QUILT_DIFF_ARGS="--color=auto" causes the output of quilt diff to be
syntax colored when writing to a terminal.
In addition to that, quilt recognizes the following variables:
EDITOR
The program to run to edit files. If it isn't redefined in the
configuration file, $EDITOR as defined in the environment will be
used.
LESS
The arguments used to invoke the pager. Inherits the existing
value of $LESS if LESS is already set in the environment,
otherwise defaults to "-FRSX".
QUILT_DIFF_OPTS
Additional options that quilt shall pass to GNU diff when
generating patches. A useful setting for C source code is "-p",
which causes GNU diff to show in the resulting patch which
function a change is in.
QUILT_PATCH_OPTS
Additional options that quilt shall pass to GNU patch when
applying patches. For example, recent versions of GNU patch
support the "--reject-format=unified" option for generating
reject files in unified diff style (older patch versions used
"--unified-reject-files" for that).
You may also want to add the "-E" option if you have issues with
quilt not deleting empty files when you think it should. The
documentation of GNU patch says that "normally this option is
unnecessary", but when patch is in POSIX mode or if the patch
format doesn't allow to distinguish empty files from deleted
files, patch deletes empty files only if the -E option is given.
Beware that when passing -E to patch, quilt will no longer be
able to deal with empty files, which is why using -E is no longer
the default.
QUILT_DIFFSTAT_OPTS
Additional options that quilt shall pass to diffstat when
generating patch statistics. For example, "-f0" can be used for
an alternative output format. Recent versions of diffstat also
support alternative rounding methods ("-r1", "-r2").
QUILT_PATCHES
The location of patch files, defaulting to "patches".
QUILT_SERIES
The name of the series file, defaulting to "series". Unless an
absolute path is used, the search algorithm described above
applies.
QUILT_PATCHES_PREFIX
If set to anything, quilt will prefix patch names it prints with
their directory (QUILT_PATCHES).
QUILT_NO_DIFF_INDEX
By default, quilt prepends an Index: line to the patches it
generates. If this variable is set to anything, no line is
prepended. This is a shortcut to adding --no-index to both
QUILT_DIFF_ARGS and QUILT_REFRESH_ARGS.
QUILT_NO_DIFF_TIMESTAMPS
By default, quilt includes timestamps in headers when generating
patches. If this variable is set to anything, no timestamp will
be included. This is a shortcut to adding --no-timestamps to
both QUILT_DIFF_ARGS and QUILT_REFRESH_ARGS.
QUILT_PAGER
The pager quilt shall use for commands which produce paginated
output. If unset, the values of GIT_PAGER or PAGER is used. If
none of these variables is set, "less -R" is used. An empty
value indicates that no pager should be used.
QUILT_COLORS
By default, quilt uses its predefined color set in order to be
more comprehensible when distiguishing various types of patches,
eg. applied/unapplied, failed, etc.
To override one or more color settings, set the QUILT_COLORS
variable in following syntax - colon (:) separated list of
elements, each being of the form <format name>=<foreground
color>[;<background color>]
Format names with their respective default values are listed
below, along with their usage(s). Color codes(values) are
standard bash coloring escape codes. See more at
http://tldp.org/LDP/abs/html/colorizing.html#AEN20229
diff_hdr Used in 'quilt diff' to color the index line. Defaults
to 32 (green).
diff_add Used in 'quilt diff' to color added lines. Defaults to
36 (azure).
diff_mod Used in 'quilt diff' to color modified lines. Defaults
to 35 (purple).
diff_rem Used in 'quilt diff' to color removed lines. Defaults
to 35 (purple).
diff_hunk Used in 'quilt diff' to color hunk header. Defaults to
33 (brown/orange).
diff_ctx Used in 'quilt diff' to color the text after end of
hunk header (diff --show-c-function generates this).
Defaults to 35 (purple).
diff_cctx Used in 'quilt diff' to color the 15-asterisk sequence
before or after a hunk. Defaults to 33 (brown/orange).
patch_fuzz
Used in 'quilt push' to color the patch fuzz
information. Defaults to 35 (purple).
patch_fail
Used in 'quilt push' to color the fail message.
Defaults to 31 (red).
series_app
Used in 'quilt series' and 'quilt patches' to color the
applied patch names. Defaults to 32 (green).
series_top
Used in 'quilt series' and 'quilt patches' to color the
top patch name. Defaults to 33 (brown/orange).
series_una
Used in 'quilt series' and 'quilt patches' to color
unapplied patch names. Defaults to 0 (no special
color).
In addition, the clear format name is used to turn off special
coloring. Its value is 0; it is not advised to modify it.
The content of QUILT_COLORS supersedes default values. So the
value diff_hdr=35;44 will get you the diff headers in magenta
over blue instead of the default green over unchanged background.
For that, add the following content to ~/.quiltrc (or
/etc/quilt.quiltrc):
QUILT_DIFF_ARGS="--color"
QUILT_COLORS='diff_hdr=35;44'
Quilt started as a series of scripts written by Andrew Morton (patch-
scripts). Based on Andrew's ideas, Andreas Gruenbacher completely
rewrote the scripts, with the help of several other contributors (see
AUTHORS file in the distribution).
This man page was written by Martin Quinson, based on information
found in the pdf documentation, and in the help messages of each
commands.
The pdf documentation, which should be under
/usr/local/share/doc/quilt/quilt.pdf. Note that some distributors
compress this file. zxpdf(1) can be used to display compressed pdf
files.
diff(1), patch(1).
This page is part of the quilt (tool to manage series of patches)
project. Information about the project can be found at
⟨http://savannah.nongnu.org/projects/quilt⟩. If you have a bug report
for this manual page, see
⟨http://savannah.nongnu.org/bugs/?group=quilt⟩. This page was
obtained from the project's upstream Git repository
⟨git://git.savannah.nongnu.org/quilt.git⟩ on 2017-07-05. If you dis‐
cover any rendering problems in this HTML version of the page, or you
believe there is a better or more up-to-date source for the page, or
you have corrections or improvements to the information in this
COLOPHON (which is not part of the original manual page), send a mail
to man-pages@man7.org
quilt Dec 17, 2013 quilt(1)