|
NAME | SYNOPSIS | DESCRIPTION | EXAMPLE | CAVEATS | FILES | PCP ENVIRONMENT | SEE ALSO | COLOPHON |
DBPMDA(1) General Commands Manual DBPMDA(1)
dbpmda - debugger for Performance Co-Pilot PMDAs
dbpmda [-efi] [-n pmnsfile] [-q timeout] [-U username]
dbpmda is an interactive interface to the interactions between a
Performance Metric Domain Agent (PMDA(3)) and the Performance Metric
Collector Daemon (pmcd(1)). This allows PMDAs to be attached,
initialized and exercised to test for correctness.
dbpmda interactively prompts the user for commands, many of which
emulate the Protocol Data Units (PDUs) that may be sent by a pmcd(1)
process. After running dbpmda, enter the command help to get a list
of the available commands. The example section below illustrates a
session using dbpmda to test a PMDA.
To simplify repetitive testing of a PMDA, the file .dbpmdarc in the
current working directory can contain a list of commands that will be
executed by dbpmda on startup, before the user is prompted to enter
further commands interactively. While processing the .dbpmdarc file,
interactive mode and command echoing are enabled and then reset at
the end of the .dbpmdarc file (see the -i and -e command line
arguments below).
The -f command line option prevents startup processing of a .dbpmdarc
file (if it exists).
If the system supports readline(3) then this will be used to read
commands when input is from a tty device, so history and command line
editing are available.
dbpmda accepts the following command line arguments:
-e Echo the input to stdout. This is useful when the input is
redirected from a file.
-i Emulate interactive behavior and prompt for new commands, even
if standard input is not a tty device.
-n pmnsfile
Normally dbpmda operates on the distributed Performance
Metrics Name Space (PMNS), however if the -n option is
specified an alternative local PMNS is loaded from the file
pmnsfile.
-q timeout
The pmcd to agent version exchange protocol (new in PCP 2.0 -
introduced to provide backward compatibility) uses this
timeout to specify how long dbpmda should wait before assuming
that no version response is coming from an agent. If this
timeout is reached, the agent is assumed to be an agent which
does not understand the PCP 2.0 protocol. The default timeout
interval is five seconds, but the -q option allows an
alternative timeout interval (which must be greater than zero)
to be specified. The unit of time is seconds.
-U username
User account under which to run dbpmda.
As there are no timeout constraints on a PMDA while using dbpmda (as
compared to pmcd(1)), another debugger like gdb(1) can be used on the
PMDA process once it has been attached to dbpmda.
Below is a dbpmda session using the simple PMDA. A .dbpmdarc file is
used to set the debugging flag, open the PMDA and display the current
status of the debugger:
$ cat .dbpmdarc
debug libpmda
open dso pmda_simple.so simple_init 253
status
When dbpmda is run, the commands in the .dbpmdarc file are executed
first:
$ dbpmda
.dbpmdarc> debug libpmda
.dbpmdarc> open dso pmda_simple.so simple_init 253
[Fri Sep 19 10:19:55] dbpmda(11651) Debug: pmdaInit: PMDA simple DSO: Metric 0.0.1(1) matched to indom 253.0(0)
[Fri Sep 19 10:19:55] dbpmda(11651) Debug: pmdaInit: PMDA simple DSO: help file $PCP_PMDAS_DIR/simple/help opened
[Fri Sep 19 10:19:55] dbpmda(11651) Info: name = simple DSO
[Fri Sep 19 10:19:55] dbpmda(11651) Info: domain = 253
[Fri Sep 19 10:19:55] dbpmda(11651) Info: num metrics = 4
[Fri Sep 19 10:19:55] dbpmda(11651) Info: num indom = 1
[Fri Sep 19 10:19:55] dbpmda(11651) Info: direct map = 1
.dbpmdarc> status
Namespace: (default)
PMDA: ./pmda_simple.so
Connection: dso
DSO Interface Version: 2
PMDA PMAPI Version: 2
pmDebug: 32768 ( libpmda )
Timer: off
Getdesc: off
Dump Instance Profile state=INCLUDE, 0 profiles
.dbpmdarc>
To examine the metric and instance descriptors, the desc and instance
commands can be used. Metrics may be identified either by name, or
using the ``dotted'' notation to specify the domain, cluster and item
fields of a PMID. Instance domains must be identified using a
``dotted'' notation to specify the domain and serial fields. The
syntax for most commands will be displayed if the command is given
without any arguments:
dbpmda> desc 253.0.0
PMID: 253.0.0
Data Type: 32-bit unsigned int InDom: PM_INDOM_NULL 0xffffffff
Semantics: instant Units: none
dbpmda> instance
instance indom# [ number | name | "name" ]
dbpmda> instance 253.0
pmInDom: 253.0
[ 0] inst: 0 name: "red"
[ 1] inst: 1 name: "green"
[ 2] inst: 2 name: "blue"
To test the most important component of a PMDA, the fetch, it is
often useful to determine the time it takes the PMDA to respond. The
timer may be turned on before giving a fetch:
dbpmda> timer on
dbpmda> fetch simple.numfetch 253.0.1
PMID(s): 253.0.0 253.0.1
pmResult dump from 0x100078e0 timestamp: 0.000000 11:00:00.000 numpmid: 2
253.0.0 (simple.numfetch): numval: 1 valfmt: 0 vlist[]:
value 1 1.4012985e-45 0x1
253.0.1 (simple.color): numval: 3 valfmt: 0 vlist[]:
inst [0 or ???] value 1 1 1.4012985e-45 0x1
inst [1 or ???] value 101 1.4153114e-43 0x65
inst [2 or ???] value 201 2.8166099e-43 0xc9
Timer: 0.003921 seconds
dbpmda> timer off
The integer, floating point and hex translations of the values in the
pmResult structure are dumped if getdesc is set to off (the default).
Setting getdesc to on would result in only integer values being
dumped in the above fetch as the descriptor describes the metrics of
32-bit unsigned integers.
The simple PMDA also supports the store operation which can be tested
with subsequent fetch commands:
dbpmda> store simple.numfetch "42"
PMID: 253.0.0
Getting description...
Getting Result Structure...
253.0.0: 2 -> 42
dbpmda> fetch simple.numfetch
PMID(s): 253.0.0
pmResult dump from 0x100078e0 timestamp: 0.000000 11:00:00.000 numpmid: 1
253.0.0 (simple.numfetch): numval: 1 valfmt: 0 vlist[]:
value 43
The value argument in the store command must be a string, which is
enclosed in either single quotes (') or double quotes (").
A profile can be specified for each instance domain which includes
all, some or no instances:
dbpmda> help profile
profile indom# [ all | none ]
profile indom# [ add | delete ] number
For the instance domain specified, the profile may be changed to
include 'all' instances, no instances, add an instance or delete
an instance.
dbpmda> profile 253.0 none
dbpmda> getdesc on
dbpmda> fetch 253.0.1
PMID(s): 253.0.1
pmResult dump from 0x100078e0 timestamp: 0.000000 11:00:00.000 numpmid: 1
253.0.1 (simple.color): No values returned!
dbpmda> profile 253.0 add 2
dbpmda> fetch 253.0.1
PMID(s): 253.0.1
pmResult dump from 0x100078e0 timestamp: 0.000000 11:00:00.000 numpmid: 1
253.0.1 (simple.color): numval: 1 valfmt: 0 vlist[]:
value 202
dbpmda> profile 253.0 add 0
dbpmda> fetch 253.0.1
PMID(s): 253.0.1
pmResult dump from 0x100078e0 timestamp: 0.000000 11:00:00.000 numpmid: 1
253.0.1 (simple.color): numval: 2 valfmt: 0 vlist[]:
inst [0 or ???] value 2
inst [2 or ???] value 203
dbpmda> status
PMDA = pmda_simple.so
Connection = dso
pmDebug = 32768 ( libpmda )
Timer = off
Dump Instance Profile state=INCLUDE, 1 profiles
Profile [0] indom=1061158913 [253.0] state=EXCLUDE 2 instances
Instances: [2] [0]
dbpmda> quit
The watch command (usage: watch filename ) opens an xterm window
which tails the specified log file. This window must be closed by
the user when no longer required.
The wait command is equivalent to sleep(1) and takes a single integer
argument.
The introduction of dynamic subtrees in the PMNS and PMDA_INTERFACE_4
in libpcp_pmda has led to additional commands being supported in
dbpmda to exercise the associated dynamic PMNS services. The
examples below are based on the sample PMDA.
$ dbpmda
dbpmda> open pipe /var/lib/pcp/pmdas/sample/pmdasample -d 29
Start pmdasample PMDA: /var/lib/pcp/pmdas/sample/pmdasample -d 29
dbpmda> children sample.secret
Metric: sample.secret
non-leaf foo
leaf bar
dbpmda> traverse sample.secret.foo
Metric: sample.secret.foo
sample.secret.foo.bar.max.redirect
sample.secret.foo.one
sample.secret.foo.two
sample.secret.foo.bar.three
sample.secret.foo.bar.four
sample.secret.foo.bar.grunt.five
sample.secret.foo.bar.grunt.snort.six
sample.secret.foo.bar.grunt.snort.huff.puff.seven
dbpmda> pmid sample.secret.foo.bar.four
Metric: sample.secret.foo.bar.four
29.0.1004
dbpmda> name 29.0.1006
PMID: 29.0.1006
sample.secret.foo.bar.grunt.snort.six
The children command returns the next name component for all the
direct descendants of a node within a dynamic subtree of the PMNS.
The related traverse command returns the full metric names for all
leaf nodes in the PMNS below the specified non-leaf node in a dynamic
subtree of the PMNS.
The name and pmid commands exercise the translation of metric names
to PMIDs (and vice versa) for metrics within a dynamic subtree of the
PMNS.
If the commands children, traverse, pmid or name are used with a PMDA
that is not using PMDA_INTERFACE_4 or with performance metric names
that are not part of a dynamic subtree of the PMNS, then the PMDA
would be expected to return errors (PM_ERR_NAME or PM_ERR_PMID) to
reflect the fact that the operation is in error (outside a dynamic
subtree of the PMNS it is pmcd(1) and not the PMDA that is
responsible for implementing these functions).
Client authentication mechanisms have been incorporated into the
PMCS, providing per-user (and per-connection) information that is
available to PMDAs. A PMDA using PMDA_INTERFACE_6 or later in
libpcp_pmda is able to make use of the "attribute" method to gain
visibility into these authenticated connections, with access to
information including user and group identifiers, user name, and so
on. The need to exercise and debug this interface has led to a new
dbpmda command. The following example is based on the sample PMDA.
$ dbpmda
dbpmda> open pipe pmdasample -D AUTH -l logfile
Start pmdasample PMDA: pmdasample -D AUTH -l logfile
dbpmda> attr "username" "tanya"
Attribute: username=tanya
Success
dbpmda> attr 11 "0"
Attribute: userid=0
Success
dbpmda>
The attr command passes connection attributes (PCP_ATTR keys) and
their values into a PMDA in much the same way that PMCD would for a
client connection. dbpmda always passes a client context identifier
of zero, and while no validity checking on values is performed only
recognised attributes can be set.
In the example above the AUTH debug flag is set for the PMDA, which
uses this in its attribute callback and records each attribute and
value pair sent to it in its logfile.
Note that authentication checks have already been performed by PMCD
by the time a PMDA is presented with these attributes, so no further
verification is necessary by the PMDA.
A value cannot be stored into metrics of type PM_TYPE_AGGREGATE or
PM_TYPE_EVENT.
dbpmda uses fork(2) and exec(2) to attach to daemon PMDAs. dbpmda
makes no attempt to detect the termination of the daemon PMDA
process, so it is possible for a PMDA to exit unexpectedly without
any notification. However, any further communication attempts with
the PMDA will result in errors which will indicate that the PMDA is
no longer responding.
./.dbpmdarc
List of commands to do on startup.
Environment variables with the prefix PCP_ are used to parameterize
the file and directory names used by PCP. On each installation, the
file /etc/pcp.conf contains the local values for these variables.
The $PCP_CONF variable may be used to specify an alternative
configuration file, as described in pcp.conf(5).
gdb(1), pmcd(1), pmdbg(1), exec(2), fork(2), PMAPI(3), PMDA(3),
pcp.conf(5) and pcp.env(5).
This page is part of the PCP (Performance Co-Pilot) project.
Information about the project can be found at ⟨http://www.pcp.io/⟩.
If you have a bug report for this manual page, send it to
pcp@oss.sgi.com. This page was obtained from the project's upstream
Git repository ⟨git://git.pcp.io/pcp⟩ on 2017-07-05. If you discover
any rendering problems in this HTML version of the page, or you
believe there is a better or more up-to-date source for the page, or
you have corrections or improvements to the information in this
COLOPHON (which is not part of the original manual page), send a mail
to man-pages@man7.org
Performance Co-Pilot PCP DBPMDA(1)
Pages that refer to this page: pmdakernel(1), pmda(3)