SCSI Kernel Parameters

See The kernel’s command-line parameters for general information on specifying module parameters.

This document may not be entirely up to date and comprehensive. The command modinfo -p ${modulename} shows a current list of all parameters of a loadable module. Loadable modules, after being loaded into the running kernel, also reveal their parameters in /sys/module/${modulename}/parameters/. Some of these parameters may be changed at runtime by the command echo -n ${value} > /sys/module/${modulename}/parameters/${parm}.

advansys=       [HW,SCSI]
                See header of drivers/scsi/advansys.c.

aha152x=        [HW,SCSI]
                See Documentation/scsi/aha152x.rst.

aha1542=        [HW,SCSI]
                Format: <portbase>[,<buson>,<busoff>[,<dmaspeed>]]

aic7xxx=        [HW,SCSI]
                See Documentation/scsi/aic7xxx.rst.

aic79xx=        [HW,SCSI]
                See Documentation/scsi/aic79xx.rst.

atascsi=        [HW,SCSI]
                See drivers/scsi/atari_scsi.c.

BusLogic=       [HW,SCSI]
                See drivers/scsi/BusLogic.c, comment before function
                BusLogic_ParseDriverOptions().

gdth=           [HW,SCSI]
                See header of drivers/scsi/gdth.c.

gvp11=          [HW,SCSI]

ips=            [HW,SCSI] Adaptec / IBM ServeRAID controller
                See header of drivers/scsi/ips.c.

mac5380=        [HW,SCSI]
                See drivers/scsi/mac_scsi.c.

scsi_mod.max_luns=
                [SCSI] Maximum number of LUNs to probe.
                Should be between 1 and 2^32-1.

scsi_mod.max_report_luns=
                [SCSI] Maximum number of LUNs received.
                Should be between 1 and 16384.

NCR_D700=       [HW,SCSI]
                See header of drivers/scsi/NCR_D700.c.

ncr5380=        [HW,SCSI]
                See Documentation/scsi/g_NCR5380.rst.

ncr53c400=      [HW,SCSI]
                See Documentation/scsi/g_NCR5380.rst.

ncr53c400a=     [HW,SCSI]
                See Documentation/scsi/g_NCR5380.rst.

ncr53c8xx=      [HW,SCSI]

osst=           [HW,SCSI] SCSI Tape Driver
                Format: <buffer_size>,<write_threshold>
                See also Documentation/scsi/st.rst.

scsi_debug_*=   [SCSI]
                See drivers/scsi/scsi_debug.c.

scsi_mod.default_dev_flags=
                [SCSI] SCSI default device flags
                Format: <integer>

scsi_mod.dev_flags=
                [SCSI] Black/white list entry for vendor and model
                Format: <vendor>:<model>:<flags>
                (flags are integer value)

scsi_mod.scsi_logging_level=
                [SCSI] a bit mask of logging levels
                See drivers/scsi/scsi_logging.h for bits.  Also
                settable via sysctl at dev.scsi.logging_level
                (/proc/sys/dev/scsi/logging_level).
                There is also a nice 'scsi_logging_level' script in the
                S390-tools package, available for download at
                https://github.com/ibm-s390-tools/s390-tools/blob/master/scripts/scsi_logging_level

scsi_mod.scan=  [SCSI] sync (default) scans SCSI busses as they are
                discovered.  async scans them in kernel threads,
                allowing boot to proceed.  none ignores them, expecting
                user space to do the scan.

sim710=         [SCSI,HW]
                See header of drivers/scsi/sim710.c.

st=             [HW,SCSI] SCSI tape parameters (buffers, etc.)
                See Documentation/scsi/st.rst.

wd33c93=        [HW,SCSI]
                See header of drivers/scsi/wd33c93.c.