Scheduler Statistics

Version 15 of schedstats dropped counters for some sched_yield: yld_exp_empty, yld_act_empty and yld_both_empty. Otherwise, it is identical to version 14.

Version 14 of schedstats includes support for sched_domains, which hit the mainline kernel in 2.6.20 although it is identical to the stats from version 12 which was in the kernel from 2.6.13-2.6.19 (version 13 never saw a kernel release). Some counters make more sense to be per-runqueue; other to be per-domain. Note that domains (and their associated information) will only be pertinent and available on machines utilizing CONFIG_SMP.

In version 14 of schedstat, there is at least one level of domain statistics for each cpu listed, and there may well be more than one domain. Domains have no particular names in this implementation, but the highest numbered one typically arbitrates balancing across all the cpus on the machine, while domain0 is the most tightly focused domain, sometimes balancing only between pairs of cpus. At this time, there are no architectures which need more than three domain levels. The first field in the domain stats is a bit map indicating which cpus are affected by that domain.

These fields are counters, and only increment. Programs which make use of these will need to start with a baseline observation and then calculate the change in the counters at each subsequent observation. A perl script which does this for many of the fields is available at

Note that any such script will necessarily be version-specific, as the main reason to change versions is changes in the output format. For those wishing to write their own scripts, the fields are described here.

CPU statistics

cpu<N> 1 2 3 4 5 6 7 8 9

First field is a sched_yield() statistic:

  1. # of times sched_yield() was called

Next three are schedule() statistics:

  1. This field is a legacy array expiration count field used in the O(1) scheduler. We kept it for ABI compatibility, but it is always set to zero.
  2. # of times schedule() was called
  3. # of times schedule() left the processor idle

Next two are try_to_wake_up() statistics:

  1. # of times try_to_wake_up() was called
  2. # of times try_to_wake_up() was called to wake up the local cpu

Next three are statistics describing scheduling latency:

  1. sum of all time spent running by tasks on this processor (in jiffies)
  2. sum of all time spent waiting to run by tasks on this processor (in jiffies)
  3. # of timeslices run on this cpu

Domain statistics

One of these is produced per domain for each cpu described. (Note that if CONFIG_SMP is not defined, no domains are utilized and these lines will not appear in the output.)

domain<N> <cpumask> 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36

The first field is a bit mask indicating what cpus this domain operates over.

The next 24 are a variety of load_balance() statistics in grouped into types of idleness (idle, busy, and newly idle):

  1. # of times in this domain load_balance() was called when the cpu was idle
  2. # of times in this domain load_balance() checked but found the load did not require balancing when the cpu was idle
  3. # of times in this domain load_balance() tried to move one or more tasks and failed, when the cpu was idle
  4. sum of imbalances discovered (if any) with each call to load_balance() in this domain when the cpu was idle
  5. # of times in this domain pull_task() was called when the cpu was idle
  6. # of times in this domain pull_task() was called even though the target task was cache-hot when idle
  7. # of times in this domain load_balance() was called but did not find a busier queue while the cpu was idle
  8. # of times in this domain a busier queue was found while the cpu was idle but no busier group was found
  9. # of times in this domain load_balance() was called when the cpu was busy
  10. # of times in this domain load_balance() checked but found the load did not require balancing when busy
  11. # of times in this domain load_balance() tried to move one or more tasks and failed, when the cpu was busy
  12. sum of imbalances discovered (if any) with each call to load_balance() in this domain when the cpu was busy
  13. # of times in this domain pull_task() was called when busy
  14. # of times in this domain pull_task() was called even though the target task was cache-hot when busy
  15. # of times in this domain load_balance() was called but did not find a busier queue while the cpu was busy
  16. # of times in this domain a busier queue was found while the cpu was busy but no busier group was found
  17. # of times in this domain load_balance() was called when the cpu was just becoming idle
  18. # of times in this domain load_balance() checked but found the load did not require balancing when the cpu was just becoming idle
  19. # of times in this domain load_balance() tried to move one or more tasks and failed, when the cpu was just becoming idle
  20. sum of imbalances discovered (if any) with each call to load_balance() in this domain when the cpu was just becoming idle
  21. # of times in this domain pull_task() was called when newly idle
  22. # of times in this domain pull_task() was called even though the target task was cache-hot when just becoming idle
  23. # of times in this domain load_balance() was called but did not find a busier queue while the cpu was just becoming idle
  24. # of times in this domain a busier queue was found while the cpu was just becoming idle but no busier group was found

Next three are active_load_balance() statistics:

  1. # of times active_load_balance() was called
  2. # of times active_load_balance() tried to move a task and failed
  3. # of times active_load_balance() successfully moved a task

Next three are sched_balance_exec() statistics:

  1. sbe_cnt is not used
  2. sbe_balanced is not used
  3. sbe_pushed is not used

Next three are sched_balance_fork() statistics:

  1. sbf_cnt is not used
  2. sbf_balanced is not used
  3. sbf_pushed is not used

Next three are try_to_wake_up() statistics:

  1. # of times in this domain try_to_wake_up() awoke a task that last ran on a different cpu in this domain
  2. # of times in this domain try_to_wake_up() moved a task to the waking cpu because it was cache-cold on its own cpu anyway
  3. # of times in this domain try_to_wake_up() started passive balancing

/proc/<pid>/schedstat

schedstats also adds a new /proc/<pid>/schedstat file to include some of the same information on a per-process level. There are three fields in this file correlating for that process to:

  1. time spent on the cpu
  2. time spent waiting on a runqueue
  3. # of timeslices run on this cpu

A program could be easily written to make use of these extra fields to report on how well a particular process or set of processes is faring under the scheduler’s policies. A simple version of such a program is available at