Kernel driver corsair-psu¶
Supported devices:
Corsair Power Supplies
Corsair HX550i
Corsair HX650i
Corsair HX750i
Corsair HX850i
Corsair HX1000i
Corsair HX1200i
Corsair RM550i
Corsair RM650i
Corsair RM750i
Corsair RM850i
Corsair RM1000i
Author: Wilken Gottwalt
Description¶
This driver implements the sysfs interface for the Corsair PSUs with a HID protocol interface of the HXi and RMi series. These power supplies provide access to a micro-controller with 2 attached temperature sensors, 1 fan rpm sensor, 4 sensors for volt levels, 4 sensors for power usage and 4 sensors for current levels and addtional non-sensor information like uptimes.
Sysfs entries¶
| curr1_input | Total current usage |
| curr2_input | Current on the 12v psu rail |
| curr3_input | Current on the 5v psu rail |
| curr4_input | Current on the 3.3v psu rail |
| fan1_input | RPM of psu fan |
| in0_input | Voltage of the psu ac input |
| in1_input | Voltage of the 12v psu rail |
| in2_input | Voltage of the 5v psu rail |
| in3_input | Voltage of the 3.3 psu rail |
| power1_input | Total power usage |
| power2_input | Power usage of the 12v psu rail |
| power3_input | Power usage of the 5v psu rail |
| power4_input | Power usage of the 3.3v psu rail |
| temp1_input | Temperature of the psu vrm component |
| temp2_input | Temperature of the psu case |
Usage Notes¶
It is an USB HID device, so it is auto-detected and supports hot-swapping.
Flickering values in the rail voltage levels can be an indicator for a failing PSU. The driver also provides some additional useful values via debugfs, which do not fit into the hwmon class.
Debugfs entries¶
| uptime | Current uptime of the psu |
| uptime_total | Total uptime of the psu |
| vendor | Vendor name of the psu |
| product | Product name of the psu |