ImageOutputStream (Java Platform SE 7 )

All Superinterfaces:

AutoCloseable, Closeable, DataInput, DataOutput, ImageInputStream

All Known Implementing Classes:

FileCacheImageOutputStream, FileImageOutputStream, ImageOutputStreamImpl, MemoryCacheImageOutputStream
```
public interface ImageOutputStream
extends ImageInputStream, DataOutput
```
A seekable output stream interface for use by ImageWriters. Various output destinations, such as OutputStreams and Files, as well as future fast I/O destinations may be "wrapped" by a suitable implementation of this interface for use by the Image I/O API.
Unlike a standard OutputStream, ImageOutputStream extends its counterpart, ImageInputStream. Thus it is possible to read from the stream as it is being written. The same seek and flush positions apply to both reading and writing, although the semantics for dealing with a non-zero bit offset before a byte-aligned write are necessarily different from the semantics for dealing with a non-zero bit offset before a byte-aligned read. When reading bytes, any bit offset is set to 0 before the read; when writing bytes, a non-zero bit offset causes the remaining bits in the byte to be written as 0s. The byte-aligned write then starts at the next byte position.

See Also:
ImageInputStream

Method Summary

Methods
Modifier and Type	Method and Description
`void`	`flushBefore(long pos)` Flushes all data prior to the given position to the underlying destination, such as an `OutputStream` or `File`.
`void`	`write(byte[] b)` Writes a sequence of bytes to the stream at the current position.
`void`	`write(byte[] b, int off, int len)` Writes a sequence of bytes to the stream at the current position.
`void`	`write(int b)` Writes a single byte to the stream at the current position.
`void`	`writeBit(int bit)` Writes a single bit, given by the least significant bit of the argument, to the stream at the current bit offset within the current byte position.
`void`	`writeBits(long bits, int numBits)` Writes a sequence of bits, given by the `numBits` least significant bits of the `bits` argument in left-to-right order, to the stream at the current bit offset within the current byte position.
`void`	`writeBoolean(boolean v)` Writes a `boolean` value to the stream.
`void`	`writeByte(int v)` Writes the 8 low-order bits of `v` to the stream.
`void`	`writeBytes(String s)` Writes a string to the output stream.
`void`	`writeChar(int v)` This method is a synonym for `writeShort`.
`void`	`writeChars(char[] c, int off, int len)` Writes a sequence of chars to the stream at the current position.
`void`	`writeChars(String s)` Writes a string to the output stream.
`void`	`writeDouble(double v)` Writes a `double` value, which is comprised of four bytes, to the output stream.
`void`	`writeDoubles(double[] d, int off, int len)` Writes a sequence of doubles to the stream at the current position.
`void`	`writeFloat(float v)` Writes a `float` value, which is comprised of four bytes, to the output stream.
`void`	`writeFloats(float[] f, int off, int len)` Writes a sequence of floats to the stream at the current position.
`void`	`writeInt(int v)` Writes the 32 bits of `v` to the stream.
`void`	`writeInts(int[] i, int off, int len)` Writes a sequence of ints to the stream at the current position.
`void`	`writeLong(long v)` Writes the 64 bits of `v` to the stream.
`void`	`writeLongs(long[] l, int off, int len)` Writes a sequence of longs to the stream at the current position.
`void`	`writeShort(int v)` Writes the 16 low-order bits of `v` to the stream.
`void`	`writeShorts(short[] s, int off, int len)` Writes a sequence of shorts to the stream at the current position.
`void`	`writeUTF(String s)` Writes two bytes of length information to the output stream in network byte order, followed by the modified UTF-8 representation of every character in the string `s`.

Methods inherited from interface javax.imageio.stream.ImageInputStream
close, flush, getBitOffset, getByteOrder, getFlushedPosition, getStreamPosition, isCached, isCachedFile, isCachedMemory, length, mark, read, read, read, readBit, readBits, readBoolean, readByte, readBytes, readChar, readDouble, readFloat, readFully, readFully, readFully, readFully, readFully, readFully, readFully, readFully, readInt, readLine, readLong, readShort, readUnsignedByte, readUnsignedInt, readUnsignedShort, readUTF, reset, seek, setBitOffset, setByteOrder, skipBytes, skipBytes

- Method Detail
  - write
```
void write(int b)
           throws IOException
```
    Writes a single byte to the stream at the current position. The 24 high-order bits of b are ignored.
    If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write. Implementers can use the flushBits method of ImageOutputStreamImpl to guarantee this.
    
    Specified by:
    
    write in interface DataOutput
    
    Parameters:
    b - an int whose lower 8 bits are to be written.
    
    Throws:
    
    IOException - if an I/O error occurs.
  - write
```
void write(byte[] b)
           throws IOException
```
    Writes a sequence of bytes to the stream at the current position. If b.length is 0, nothing is written. The byte b[0] is written first, then the byte b[1], and so on.
    If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write.
    
    Specified by:
    
    write in interface DataOutput
    
    Parameters:
    b - an array of bytes to be written.
    
    Throws:
    
    NullPointerException - if b is null.
    
    IOException - if an I/O error occurs.
  - write
```
void write(byte[] b,
         int off,
         int len)
           throws IOException
```
    Writes a sequence of bytes to the stream at the current position. If len is 0, nothing is written. The byte b[off] is written first, then the byte b[off + 1], and so on.
    If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write. Implementers can use the flushBits method of ImageOutputStreamImpl to guarantee this.
    
    Specified by:
    
    write in interface DataOutput
    
    Parameters:
    b - an array of bytes to be written.
    off - the start offset in the data.
    len - the number of bytes to write.
    
    Throws:
    
    IndexOutOfBoundsException - if off is negative, len is negative, or off + len is greater than b.length.
    
    NullPointerException - if b is null.
    
    IOException - if an I/O error occurs.
  - writeBoolean
```
void writeBoolean(boolean v)
                  throws IOException
```
    Writes a boolean value to the stream. If v is true, the value (byte)1 is written; if v is false, the value (byte)0 is written.
    If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write.
    
    Specified by:
    
    writeBoolean in interface DataOutput
    
    Parameters:
    v - the boolean to be written.
    
    Throws:
    
    IOException - if an I/O error occurs.
  - writeByte
```
void writeByte(int v)
               throws IOException
```
    Writes the 8 low-order bits of v to the stream. The 24 high-order bits of v are ignored. (This means that writeByte does exactly the same thing as write for an integer argument.)
    If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write.
    
    Specified by:
    
    writeByte in interface DataOutput
    
    Parameters:
    v - an int containing the byte value to be written.
    
    Throws:
    
    IOException - if an I/O error occurs.
  - writeShort
```
void writeShort(int v)
                throws IOException
```
    Writes the 16 low-order bits of v to the stream. The 16 high-order bits of v are ignored. If the stream uses network byte order, the bytes written, in order, will be:
```
 (byte)((v >> 8) & 0xff)
 (byte)(v & 0xff)
 
```
    Otherwise, the bytes written will be:
```
 (byte)(v & 0xff)
 (byte)((v >> 8) & 0xff)
 
```
    If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write.
    Specified by:
    
    writeShort in interface DataOutput
    
    Parameters:
    v - an int containing the short value to be written.
    
    Throws:
    
    IOException - if an I/O error occurs.
  - writeChar
```
void writeChar(int v)
               throws IOException
```
    This method is a synonym for writeShort.
    
    Specified by:
    
    writeChar in interface DataOutput
    
    Parameters:
    v - an int containing the char (unsigned short) value to be written.
    
    Throws:
    
    IOException - if an I/O error occurs.
    See Also:
    writeShort(int)
  - writeInt
```
void writeInt(int v)
              throws IOException
```
    Writes the 32 bits of v to the stream. If the stream uses network byte order, the bytes written, in order, will be:
```
 (byte)((v >> 24) & 0xff)
 (byte)((v >> 16) & 0xff)
 (byte)((v >> 8) & 0xff)
 (byte)(v & 0xff)
 
```
    Otheriwse, the bytes written will be:
```
 (byte)(v & 0xff)
 (byte)((v >> 8) & 0xff)
 (byte)((v >> 16) & 0xff)
 (byte)((v >> 24) & 0xff)
 
```
    If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write.
    Specified by:
    
    writeInt in interface DataOutput
    
    Parameters:
    v - an int containing the value to be written.
    
    Throws:
    
    IOException - if an I/O error occurs.
  - writeLong
```
void writeLong(long v)
               throws IOException
```
    Writes the 64 bits of v to the stream. If the stream uses network byte order, the bytes written, in order, will be:
```
 (byte)((v >> 56) & 0xff)
 (byte)((v >> 48) & 0xff)
 (byte)((v >> 40) & 0xff)
 (byte)((v >> 32) & 0xff)
 (byte)((v >> 24) & 0xff)
 (byte)((v >> 16) & 0xff)
 (byte)((v >> 8) & 0xff)
 (byte)(v & 0xff)
 
```
    Otherwise, the bytes written will be:
```
 (byte)(v & 0xff)
 (byte)((v >> 8) & 0xff)
 (byte)((v >> 16) & 0xff)
 (byte)((v >> 24) & 0xff)
 (byte)((v >> 32) & 0xff)
 (byte)((v >> 40) & 0xff)
 (byte)((v >> 48) & 0xff)
 (byte)((v >> 56) & 0xff)
 
```
    If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write.
    Specified by:
    
    writeLong in interface DataOutput
    
    Parameters:
    v - a long containing the value to be written.
    
    Throws:
    
    IOException - if an I/O error occurs.
  - writeFloat
```
void writeFloat(float v)
                throws IOException
```
    Writes a float value, which is comprised of four bytes, to the output stream. It does this as if it first converts this float value to an int in exactly the manner of the Float.floatToIntBits method and then writes the int value in exactly the manner of the writeInt method.
    If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write.
    
    Specified by:
    
    writeFloat in interface DataOutput
    
    Parameters:
    v - a float containing the value to be written.
    
    Throws:
    
    IOException - if an I/O error occurs.
  - writeDouble
```
void writeDouble(double v)
                 throws IOException
```
    Writes a double value, which is comprised of four bytes, to the output stream. It does this as if it first converts this double value to an long in exactly the manner of the Double.doubleToLongBits method and then writes the long value in exactly the manner of the writeLong method.
    If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write.
    
    Specified by:
    
    writeDouble in interface DataOutput
    
    Parameters:
    v - a double containing the value to be written.
    
    Throws:
    
    IOException - if an I/O error occurs.
  - writeBytes
```
void writeBytes(String s)
                throws IOException
```
    Writes a string to the output stream. For every character in the string s, taken in order, one byte is written to the output stream. If s is null, a NullPointerException is thrown.
    If s.length is zero, then no bytes are written. Otherwise, the character s[0] is written first, then s[1], and so on; the last character written is s[s.length-1]. For each character, one byte is written, the low-order byte, in exactly the manner of the writeByte method. The high-order eight bits of each character in the string are ignored.
    If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write.
    
    Specified by:
    
    writeBytes in interface DataOutput
    
    Parameters:
    s - a String containing the value to be written.
    
    Throws:
    
    NullPointerException - if s is null.
    
    IOException - if an I/O error occurs.
  - writeChars
```
void writeChars(String s)
                throws IOException
```
    Writes a string to the output stream. For every character in the string s, taken in order, two bytes are written to the output stream, ordered according to the current byte order setting. If network byte order is being used, the high-order byte is written first; the order is reversed otherwise. If s is null, a NullPointerException is thrown.
    If s.length is zero, then no bytes are written. Otherwise, the character s[0] is written first, then s[1], and so on; the last character written is s[s.length-1].
    If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write.
    
    Specified by:
    
    writeChars in interface DataOutput
    
    Parameters:
    s - a String containing the value to be written.
    
    Throws:
    
    NullPointerException - if s is null.
    
    IOException - if an I/O error occurs.
  - writeUTF
```
void writeUTF(String s)
              throws IOException
```
    Writes two bytes of length information to the output stream in network byte order, followed by the modified UTF-8 representation of every character in the string s. If s is null, a NullPointerException is thrown. Each character in the string s is converted to a group of one, two, or three bytes, depending on the value of the character.
    If a character c is in the range \u0001 through \u007f, it is represented by one byte:
```
 (byte)c
 
```
    If a character c is \u0000 or is in the range \u0080 through \u07ff, then it is represented by two bytes, to be written in the order shown:
```
 (byte)(0xc0 | (0x1f & (c >> 6)))
 (byte)(0x80 | (0x3f & c))
 
```
    If a character c is in the range \u0800 through uffff, then it is represented by three bytes, to be written in the order shown:
```
 (byte)(0xe0 | (0x0f & (c >> 12)))
 (byte)(0x80 | (0x3f & (c >> 6)))
 (byte)(0x80 | (0x3f & c))
 
```
    First, the total number of bytes needed to represent all the characters of s is calculated. If this number is larger than 65535, then a UTFDataFormatException is thrown. Otherwise, this length is written to the output stream in exactly the manner of the writeShort method; after this, the one-, two-, or three-byte representation of each character in the string s is written.
    The current byte order setting is ignored.
    If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write.
    Note: This method should not be used in the implementation of image formats that use standard UTF-8, because the modified UTF-8 used here is incompatible with standard UTF-8.
    Specified by:
    
    writeUTF in interface DataOutput
    
    Parameters:
    s - a String containing the value to be written.
    
    Throws:
    
    NullPointerException - if s is null.
    
    UTFDataFormatException - if the modified UTF-8 representation of s requires more than 65536 bytes.
    
    IOException - if an I/O error occurs.
  - writeShorts
```
void writeShorts(short[] s,
               int off,
               int len)
                 throws IOException
```
    Writes a sequence of shorts to the stream at the current position. If len is 0, nothing is written. The short s[off] is written first, then the short s[off + 1], and so on. The byte order of the stream is used to determine the order in which the individual bytes are written.
    If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write.
    
    Parameters:
    s - an array of shorts to be written.
    off - the start offset in the data.
    len - the number of shorts to write.
    
    Throws:
    
    IndexOutOfBoundsException - if off is negative, len is negative, or off + len is greater than s.length.
    
    NullPointerException - if s is null.
    
    IOException - if an I/O error occurs.
  - writeChars
```
void writeChars(char[] c,
              int off,
              int len)
                throws IOException
```
    Writes a sequence of chars to the stream at the current position. If len is 0, nothing is written. The char c[off] is written first, then the char c[off + 1], and so on. The byte order of the stream is used to determine the order in which the individual bytes are written.
    If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write.
    
    Parameters:
    c - an array of chars to be written.
    off - the start offset in the data.
    len - the number of chars to write.
    
    Throws:
    
    IndexOutOfBoundsException - if off is negative, len is negative, or off + len is greater than c.length.
    
    NullPointerException - if c is null.
    
    IOException - if an I/O error occurs.
  - writeInts
```
void writeInts(int[] i,
             int off,
             int len)
               throws IOException
```
    Writes a sequence of ints to the stream at the current position. If len is 0, nothing is written. The int i[off] is written first, then the int i[off + 1], and so on. The byte order of the stream is used to determine the order in which the individual bytes are written.
    If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write.
    
    Parameters:
    i - an array of ints to be written.
    off - the start offset in the data.
    len - the number of ints to write.
    
    Throws:
    
    IndexOutOfBoundsException - if off is negative, len is negative, or off + len is greater than i.length.
    
    NullPointerException - if i is null.
    
    IOException - if an I/O error occurs.
  - writeLongs
```
void writeLongs(long[] l,
              int off,
              int len)
                throws IOException
```
    Writes a sequence of longs to the stream at the current position. If len is 0, nothing is written. The long l[off] is written first, then the long l[off + 1], and so on. The byte order of the stream is used to determine the order in which the individual bytes are written.
    If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write.
    
    Parameters:
    l - an array of longs to be written.
    off - the start offset in the data.
    len - the number of longs to write.
    
    Throws:
    
    IndexOutOfBoundsException - if off is negative, len is negative, or off + len is greater than l.length.
    
    NullPointerException - if l is null.
    
    IOException - if an I/O error occurs.
  - writeFloats
```
void writeFloats(float[] f,
               int off,
               int len)
                 throws IOException
```
    Writes a sequence of floats to the stream at the current position. If len is 0, nothing is written. The float f[off] is written first, then the float f[off + 1], and so on. The byte order of the stream is used to determine the order in which the individual bytes are written.
    If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write.
    
    Parameters:
    f - an array of floats to be written.
    off - the start offset in the data.
    len - the number of floats to write.
    
    Throws:
    
    IndexOutOfBoundsException - if off is negative, len is negative, or off + len is greater than f.length.
    
    NullPointerException - if f is null.
    
    IOException - if an I/O error occurs.
  - writeDoubles
```
void writeDoubles(double[] d,
                int off,
                int len)
                  throws IOException
```
    Writes a sequence of doubles to the stream at the current position. If len is 0, nothing is written. The double d[off] is written first, then the double d[off + 1], and so on. The byte order of the stream is used to determine the order in which the individual bytes are written.
    If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write.
    
    Parameters:
    d - an array of doubless to be written.
    off - the start offset in the data.
    len - the number of doubles to write.
    
    Throws:
    
    IndexOutOfBoundsException - if off is negative, len is negative, or off + len is greater than d.length.
    
    NullPointerException - if d is null.
    
    IOException - if an I/O error occurs.
  - writeBit
```
void writeBit(int bit)
              throws IOException
```
    Writes a single bit, given by the least significant bit of the argument, to the stream at the current bit offset within the current byte position. The upper 31 bits of the argument are ignored. The given bit replaces the previous bit at that position. The bit offset is advanced by one and reduced modulo 8.
    If any bits of a particular byte have never been set at the time the byte is flushed to the destination, those bits will be set to 0 automatically.
    
    Parameters:
    bit - an int whose least significant bit is to be written to the stream.
    
    Throws:
    
    IOException - if an I/O error occurs.
  - writeBits
```
void writeBits(long bits,
             int numBits)
               throws IOException
```
    Writes a sequence of bits, given by the numBits least significant bits of the bits argument in left-to-right order, to the stream at the current bit offset within the current byte position. The upper 64 - numBits bits of the argument are ignored. The bit offset is advanced by numBits and reduced modulo 8. Note that a bit offset of 0 always indicates the most-significant bit of the byte, and bytes of bits are written out in sequence as they are encountered. Thus bit writes are always effectively in network byte order. The actual stream byte order setting is ignored.
    Bit data may be accumulated in memory indefinitely, until flushBefore is called. At that time, all bit data prior to the flushed position will be written.
    If any bits of a particular byte have never been set at the time the byte is flushed to the destination, those bits will be set to 0 automatically.
    
    Parameters:
    bits - a long containing the bits to be written, starting with the bit in position numBits - 1 down to the least significant bit.
    numBits - an int between 0 and 64, inclusive.
    
    Throws:
    
    IllegalArgumentException - if numBits is not between 0 and 64, inclusive.
    
    IOException - if an I/O error occurs.
  - flushBefore
```
void flushBefore(long pos)
                 throws IOException
```
    Flushes all data prior to the given position to the underlying destination, such as an OutputStream or File. Attempting to seek to the flushed portion of the stream will result in an IndexOutOfBoundsException.
    
    Specified by:
    
    flushBefore in interface ImageInputStream
    
    Parameters:
    pos - a long containing the length of the stream prefix that may be flushed to the destination.
    
    Throws:
    
    IndexOutOfBoundsException - if pos lies in the flushed portion of the stream or past the current stream position.
    
    IOException - if an I/O error occurs.

Submit a bug or feature
For further API reference and developer documentation, see Java SE Documentation. That documentation contains more detailed, developer-targeted descriptions, with conceptual overviews, definitions of terms, workarounds, and working code examples.
Copyright © 1993, 2015, Oracle and/or its affiliates. All rights reserved.

Interface ImageOutputStream

Method Summary

Methods inherited from interface javax.imageio.stream.ImageInputStream

Method Detail

write

write

write

writeBoolean

writeByte

writeShort

writeChar

writeInt

writeLong

writeFloat

writeDouble

writeBytes

writeChars

writeUTF

writeShorts

writeChars

writeInts

writeLongs

writeFloats

writeDoubles

writeBit

writeBits

flushBefore