Defines the owner of a resource and the access privileges granted to various operating system users and groups. The resource owner defines the operating system user of the owner and its privileges. You configure this optional attribute when you create a resource. If you do not configure this attribute, then the value is based on the identity of the process creating the resource. You can change the value of the attribute if such a change is allowed based on the existing privileges of the resource.

In the string:

• owner: The operating system user that owns a resource and the user under which the action script or application-specific agent runs, followed by the privileges of the owner.

• pgrp: The operating system group that is the primary group of the owner of a resource, followed by the privileges of members of the primary group.

• other: Operating system users that are neither the owner nor member of the primary group

• r: The read option, which gives the ability to only see a resource, its state, and configuration

• w: The write option, which gives the ability to modify a resource's attributes and to delete the resource

• x: The execute option, which gives the ability to start, stop, and relocate a resource

By default, the identity of the client that creates a resource is the owner. Also by default, root, and the user specified in owner have full privileges. You can grant required operating system users and operating system groups their privileges by adding the following lines to the ACL attribute:

user:user_name:rwx
group:group_name:rwx

ACL=owner:user_1:rwx,pgrp:osdba:rwx,other::r-

In the preceding example, the owner of the resource is user_1, whose primary group is osdba. The user, user_1, has all privileges, as does the osdba group, while other users can only view the resource.

An absolute file name that includes the path and file name of an action script. The agent specified in the AGENT_FILENAME attribute calls the script specified in the ACTION_SCRIPT attribute.

ACTION_SCRIPT=fully_qualified_path_to_action_script

A single timeout value, in seconds, for all supported actions that Oracle Clusterware can perform on a resource.

ACTION_TIMEOUT=30

The ACTIONS attribute declares a table of names that lists the actions that Oracle Clusterware can perform on a resource and the permissions that correspond to the actions. The ACTIONS attribute contains a space-delimited list of action specifications, where each specification has the following format, where:

• actionName is the name of the action (the maximum length is 32 US7ASCII alphanumeric, case-sensitive characters)

• userName is an operating system user name that is enabled to perform the action

• groupName is an operating system group name that is enabled to perform the action

actionName [,user:userName | group:groupName][ ...]

If you do not specify a userName or groupName, then Oracle Clusterware assumes that the actions are universally accessible.

The following example enables multiple actions:

ACTIONS='action1 action2,user:user2 action3,group:group1'

When set to 1, Oracle Clusterware uses this attribute to reevaluate the placement of a resource during addition or restart of a cluster server. For resources where PLACEMENT=favored, Oracle Clusterware may relocate running resources if the resources run on a non-favored server when a favored one joins the cluster.

ACTIVE_PLACEMENT=1

A fully qualified file name of an agent program that a resource type uses to manage its resources. Every resource type must have an agent program to manage its resources. Resource types use agent programs by either specifying a value for this attribute or inheriting it from their base resource type. There are two script agents included with Oracle Clusterware 12c: application and scriptagent. Oracle Clusterware uses the application script agent for resources of the deprecated application resource type. The default value for this attribute is scriptagent.

AGENT_FILENAME=%Grid_home%/bin/application

Use to specify additional resource attributes that are to be included in resource state alert messages. You can specify the attribute as a space-delimited list of resource attributes. These attributes must be accessible from the resource type to display in alert messages.

ALERT_TEMPLATE="DESCRIPTION HOSTING_MEMBERS"

Indicates whether Oracle Clusterware automatically starts a resource after a cluster server restart. Valid AUTO_START values are:

• always: Restarts the resource when the server restarts regardless of the state of the resource when the server stopped.

• restore: Restores the resource to the same state that it was in when the server stopped. Oracle Clusterware attempts to restart the resource if the value of TARGET was ONLINE before the server stopped.

• never: Oracle Clusterware never restarts the resource regardless of the state of the resource when the server stopped.

The number of servers on which a resource or resource group can run, simultaneously. This is the upper limit for resource cardinality.

CARDINALITY=1

You can also use a value such that cardinality always increases and decreases with the number of servers that are assigned to the server pool in which the resource or resource group is configured to run. The value is:

CARDINALITY=%CRS_SERVER_POOL_SIZE%

Only resources with PLACEMENT=restricted and that use the SERVER_POOLS attribute can use this value.

An integer different for each of the INSTANCE_COUNT resource instances.

The time interval, in seconds, between repeated executions of the check action. Shorter intervals enable more frequent checks but also increase resource consumption if you use the script agent. Use an application-specific agent to reduce resource consumption.

CHECK_INTERVAL=60

The maximum time, in seconds, in which a check action can run. Oracle Clusterware returns an error message if the action does not complete within the time specified. If you do not specify this attribute or if you specify 0 seconds, then Oracle Clusterware uses the value of the SCRIPT_TIMEOUT attribute.

CHECK_TIMEOUT=30

The maximum time, in seconds, in which a clean action can run. Oracle Clusterware returns an error message if the action does not complete within the time specified. If you do not specify a value for this attribute or you specify 0 seconds, then Oracle Clusterware uses the value of the STOP_TIMEOUT attribute.

CLEAN_TIMEOUT=30

Resource group attribute that contains a list of resources marked critical for a resource group.

CRITICAL_RESOURCES="r1 r2 r3"
CRITICAL_RESOURCES="appvip type:ora.export.type"

The maximum time, in seconds, in which a delete action can run. Oracle Clusterware returns an error message if the action does not complete within the time specified. If you do not specify a value for this attribute or you specify 0 seconds, then Oracle Clusterware uses the value of the SCRIPT_TIMEOUT attribute.

DELETE_TIMEOUT=30

Enter a description of the resource you are adding.

DESCRIPTION=Apache Web server

Oracle Clusterware uses this attribute to manage the state of the resource. Oracle Clusterware does not attempt to manage a disabled (ENABLED=0) resource either directly or because of a dependency to another resource. A disabled resource cannot be started but it can be stopped. Oracle Clusterware does not actively monitor disabled resources, meaning that Oracle Clusterware does not check their state.

ENABLED=1

The interval, in seconds, before which Oracle Clusterware stops a resource if the resource has exceeded the number of failures specified by the FAILURE_THRESHOLD attribute. If the value is zero (0), then tracking of failures is disabled.

FAILURE_INTERVAL=30

The number of failures of a resource detected within a specified FAILURE_INTERVAL for the resource before Oracle Clusterware marks the resource as unavailable and no longer monitors it. If a resource fails the specified number of times, then Oracle Clusterware stops the resource. If the value is zero (0), then tracking of failures is disabled. The maximum value is 20.

FAILURE_THRESHOLD=3

A space-delimited, ordered list of cluster server names that can host a resource. This attribute is required only when using administrator management, and when the value of the PLACEMENT attribute is set to favored or restricted. When registering applications as Oracle Clusterware resources, use the SERVER_POOLS attribute, instead.

To obtain a list of candidate node names, run the olsnodes command to display a list of your server names.

HOSTING_MEMBERS=server1 server2 server3

Use the INSTANCE_FAILOVER attribute for resources of type CLUSTER_RESOURCE. Using this attribute enables you to disallow the failover of resource instances from the servers on which they fail. This enables you to bind the resource to a particular server.

Set to 0 to disable instance failover.

INSTANCE_FAILOVER=1

Denotes the maximum amount of time in seconds that a resource can remain in the INTERMEDIATE state before the resource is declared as failed. The value of INTERMEDIATE_TIMEOUT must be greater than 0 to take effect.

INTERMEDIATE_TIMEOUT=60

Oracle Clusterware interprets the value of this attribute along with that of the PLACEMENT attribute. When the value of PLACEMENT is balanced, the value of LOAD determines where best to place a resource. A nonnegative, numeric value that quantitatively represents how much server capacity an instance of a resource consumes relative to other resources. Oracle Clusterware attempts to place resources on servers with the least total load of running resources.

LOAD=1

The maximum time, in seconds, in which a modify action can run. Oracle Clusterware returns an error message if the action does not complete within the time specified. If you do not specify a value for this attribute or you specify 0 seconds, then Oracle Clusterware uses the value of the SCRIPT_TIMEOUT attribute.

MODIFY_TIMEOUT=30

A case-sensitive alphanumeric string that names the resource. Oracle recommends a naming convention that starts with an alphanumeric prefix, such as myApache, and complete the name with an identifier to describe it. A resource name can contain any platform-supported characters except the exclamation point (!) and the tilde (~). A resource name cannot begin with a period (.) nor with the string ora.

NAME=myApache

Controls offline monitoring of a resource. The value represents the interval (in seconds) that Oracle Clusterware monitors a resource when its state is OFFLINE. Monitoring is disabled if the value is 0.

OFFLINE_CHECK_INTERVAL=30

Specifies how Oracle Clusterware selects a cluster server on which to start a resource. Valid values are balanced, favored, or restricted.

If you set the PLACEMENT attribute to favored or restricted, then you must also assign values to the SERVER_POOLS and HOSTING_MEMBERS attributes. If you set the value of the PLACEMENT attribute to balanced, then the HOSTING_MEMBERS attribute is not required.

PLACEMENT=favored

Use to declare whether a resource will be enabled for relocation if requested to do so because of a dependency on the resource for which the relocation was requested. If 0, the resource will not be allowed to relocate because of a dependency on the resource for which relocate request was issued. The valid values are 1 or 0.

RELOCATE_BY_DEPENDENCY=1

The number of times that Oracle Clusterware attempts to restart a resource on the resource's current server before attempting to relocate it. A value of 1 indicates that Oracle Clusterware only attempts to restart the resource once on a server. A second failure causes Oracle Clusterware to attempt to relocate the resource. A value of 0 indicates that there is no attempt to restart but Oracle Clusterware always tries to fail the resource over to another server.

RESTART_ATTEMPTS=2

The maximum time (in seconds) for an action to run. Oracle Clusterware returns an error message if the action script does not complete within the time specified. The timeout applies to all actions (start, stop, check, and clean).

SCRIPT_TIMEOUT=45

For local resources, the definition of a local_resource type is extended to be category-aware. In other words, you can restrict local resources to belong to a particular server category. For cluster resources, the value for the SERVER_CATEGORY attribute always functions with the value for the PLACEMENT attribute. Set SERVER_POOLS to * when PLACEMENT is restricted and SERVER_CATEGORY is used. If you set PLACEMENT to restricted, then Oracle Clusterware expects one of the following attributes to also be set:

• HOSTING_MEMBERS

• SERVER_POOLS

• SERVER_CATEGORY

For example, a resource, known as resource1, can have a policy that sets the value of PLACEMENT to be restricted, and SERVER_CATEGORY is set to HubCategory. In such a case, Oracle Clusterware would only enable resource1 to run on the servers that belong to the HubCategory.

If PLACEMENT is set to favored and if only one of HOSTING_MEMBERS, SERVER_POOLS, or SERVER_CATEGORY is set, then that value expresses a preference. If HOSTING_MEMBERS is populated and one of SERVER_POOLS or SERVER_CATEGORY is set, then the HOSTING_MEMBERS indicates placement preference and SERVER_POOLS or SERVER_CATEGORY indicates a restriction. For example, the ora.cluster.vip resource can have a policy that sets the value of PLACEMENT to favored, and SERVER_CATEGORY is set to HubCategory and HOSTING_MEMBERS is set to server_name1. In such a case, Oracle Clusterware restricts the placement of ora.cluster.vip to the servers in the HubCategory and then it prefers the server known as server_name1.

SERVER_CATEGORY=my_category

The SERVER_POOLS resource attribute is described.

A space-delimited list of the server pools to which a particular resource can belong. If a resource can run on any server in a cluster, then use the default value, *, unless the resource is a cluster_resource type, in which case, the default value for the SERVER_POOLS attribute is empty. Only cluster administrators can specify * as the value for this attribute.

• Use the PLACEMENT attribute with the SERVER_POOLS attribute, as follows: If you set the value of the PLACEMENT attribute to either restricted or favored, then you must also provide a value for the SERVER_POOLS attribute when using policy management for the resource.

• If the value for PLACEMENT is set to balanced, then the resource only runs in the Generic and Free pools, unless SERVER_POOLS=*.

This attribute creates an affinity between a resource and one or more server pools regarding placement, and depends on the value of the PLACEMENT attribute.

SERVER_POOLS=pool1 pool2 pool3

Describes the maximum number of start actions that can be concurrent at a time. A value of 0 means “no limit."

START_CONCURRENCY=10

Specifies a set of relationships that Oracle Clusterware considers when starting a resource. You can specify a space-delimited list of dependencies on several resources and resource types on which a particular resource can depend.

START_DEPENDENCIES=dependency(resource_set) [dependency(resource_set)] [...]

In the preceding syntax example the variables are defined, as follows:

• dependency: Possible values are attraction, dispersion, exclusion, hard, pullup, and weak. You can specify each dependency only once, except for pullup, which you can specify multiple times.

• resource_set: A comma-delimited list of resource entities—either individual resources or resource types—enclosed in parentheses (), in the form of res1[, res2[, ...]], upon which the resource you are configuring depends.

  Each resource entity is defined, as follows:

  [modifier1:[modifier2:]] {resource_name | type:resource_type}
  

  In the preceding syntax example, resource_name is the name of a specific resource and type:resource_type is the name of a specific resource type. The resource type must be preceded by type and the type modifier must be the last resource entity in the list.

  Optionally, you can specify modifiers to further configure resource entity dependencies. You can modify each dependency by prefixing the following modifiers to the resource entity:

  • attraction([intermediate:]{resource_name | type:resource_type})—Use the attraction start dependency when you want this resource to run on the same server with a particular named resource or any resource of a particular type.

    Use intermediate to specify that this resource is attracted to resource entities on which it depends that are in the INTERMEDIATE state. If not specified, then resources must be in the ONLINE state to attract the dependent resource.

    If you specify the attraction dependency on a resource type for a resource, then any resource of that particular type attracts the dependent resource.

  • exclusion([[preempt_pre: | preempt_post:]] target_resource_name | type:target_resource_type])—Use the exclusion start dependency to keep resources with this dependency from running on the same node.

    Use the preempt_pre modifier to configure the exclusion dependency to stop the specified target resource or resources defined by a specific resource type before starting the source resource.

    Use the preempt_post modifier to configure the exclusion dependency to stop and relocate, if possible, the specified target resource or resources defined by a specific resource type after starting the source resource.

  • dispersion[:active]([intermediate:][pool:]{resource_name | type:resource_type})—Specify the dispersion start dependency for a resource that you want to run on a server that is different from the named resources or resources of a particular type. Resources may still end up running on the same server, depending on availability of servers.

    Use the active modifier to configure the dispersion dependency so that Oracle Clusterware attempts to relocate the dependent resource to another server if it is collocated with another resource and another server comes online. Oracle Clusterware does not relocate resources to newly available servers unless you specify the active modifier.

    Use the intermediate modifier to specify that Oracle Clusterware can relocate the dependent resource if a resource is in either the ONLINE or INTERMEDIATE state. If not specified, then resources must be in the ONLINE state for dispersion of the dependent resource to occur.

    Use the pool modifier if you want a resource to be located in a different server pool than the target, rather than just a different server.

  • hard([intermediate:][global:][uniform:]{resource_name | type:resource_type})—Specify a hard start dependency for a resource when you want the resource to start only when a particular resource or resource of a particular type starts.

    Use the intermediate modifier to specify that Oracle Clusterware can start this resource if a resource on which it depends is in either the ONLINE or INTERMEDIATE state. If not specified, then resources must be in the ONLINE state for Oracle Clusterware to start this resource.

    Use the global modifier to specify that resources are not required to reside on the same server as a condition to Oracle Clusterware starting this resource. If not specified, then resources must reside on the same server for Oracle Clusterware to start this resource.

    Use the uniform modifier to attempt to start all instances of resource B, but only one instance, at least must start to satisfy the dependency.

    If you specify the hard dependency on a resource type for a resource, then the resource can start if any resource of that particular type is running.

    Note:

    Oracle recommends that resources with hard start dependencies also have pullup start dependencies.

  • pullup[:always]([intermediate:][global:]{resource_name | type:resource_type})—When you specify the pullup start dependency for a resource, then this resource starts because of named resources starting.

    Use the always modifier for pullup so that Oracle Clusterware starts this resource despite the value of its TARGET attribute, whether that value is ONLINE or OFFLINE. Otherwise, if you do not specify the always modifier, then Oracle Clusterware starts this resource only if the value of the TARGET attribute is ONLINE for this resource.

    Use the intermediate modifier to specify that Oracle Clusterware can start this resource if a resource on which it depends is in either the ONLINE or INTERMEDIATE state. If not specified, then resources must be in the ONLINE state for Oracle Clusterware to start this resource.

    Use the global modifier to specify that resources on which this resource depends are not required to reside on the same server as a condition to Oracle Clusterware starting this resource. If not specified, then resources on which this resource depends must reside on the same server for Oracle Clusterware to start this resource.

    If you specify the pullup dependency on a resource type for a resource, then, when any resource of that particular type starts, Oracle Clusterware can start this resource.

    Note:

    Oracle recommends that resources with hard start dependencies also have pullup start dependencies.

  • weak([concurrent:][global:][uniform:]{resource_name | type:resource_type})—Specify a weak start dependency for a resource when you want that resource to start despite whether named resources are running, or not. An attempt to start this resource also attempts to start any resources on which this resource depends if they are not running.

    Use the concurrent modifier to specify that Oracle Clusterware can start a dependent resource while a resource on which it depends is in the process of starting. If concurrent is not specified, then resources must complete startup before Oracle Clusterware can start the dependent resource.

    Use the global modifier to specify that resources are not required to reside on the same server as a condition to Oracle Clusterware starting the dependent resource.

    Use the uniform modifier to start all instances of the resource everywhere the resource can run. If you do not specify a modifier (the default), then the resource starts on the same server as the resource on which it depends.

    If you specify the weak start dependency on a resource type for a resource, then the resource can start if any resource of that particular type is running.

The maximum time (in seconds) in which a start action can run. Oracle Clusterware returns an error message if the action does not complete within the time specified. If you do not specify a value for this attribute or you specify 0 seconds, then Oracle Clusterware uses the value of the SCRIPT_TIMEOUT attribute.

START_TIMEOUT=30

Describes the maximum number of stop actions that can be concurrent at a time. A value of 0 means “no limit."

STOP_CONCURRENCY=10

Specifies a set of relationships that Oracle Clusterware considers when stopping a resource.

STOP_DEPENDENCIES=dependency(resource_set) [dependency(resource_set)] ...

In the preceding syntax example the variables are defined, as follows:

• dependency: The only possible value is hard.

• resource_set: A comma-delimited list, in the form of res1[, res2 [,...]], of resource entities—either individual resources or resource types—upon which the resource you are configuring depends.

  Each resource entity is defined, as follows:

  [modifier1:[modifier2:][modifier3:]] resource_name | type:resource_type
  

  In the preceding syntax example, resource_name is the name of a specific resource and type:resource_type is the name of a specific resource type. The resource type must be preceded by type:.

  Optionally, you can specify modifiers to further configure resource entity dependencies. You can modify each dependency by prefixing the following modifiers to the resource entity:

  hard([intermediate:][global:][shutdown:]{resource_name | type:resource_type})—Specify a hard stop dependency for a resource that you want to stop when named resources or resources of a particular resource type stop.

  Use intermediate to specify that the dependent resource can remain in an ONLINE state if a resource is in either the ONLINE or INTERMEDIATE state. If not specified, then Oracle Clusterware stops the dependent resource unless resources are in the ONLINE state.

  Use global to specify that the dependent resource remains in an ONLINE state if a resource is in an ONLINE state on any node in the cluster. If not specified, then when resources residing on the same server go offline, Oracle Clusterware stops the dependent resource.

  Use shutdown to apply this dependency when the Oracle Clusterware stack is shut down. This is a convenient way to affect the order of stopping resources when stopping the stack, without having any affect on planned or unplanned events on the individual resources. This dependency, when used with the shutdown modifier, does not go into effect if somebody stops the resource directly, but only when the stack is shut down.

The maximum time (in seconds) in which a stop or clean action can run. Oracle Clusterware returns an error message if the action does not complete within the time specified. If you do not specify this attribute or if you specify 0 seconds, then Oracle Clusterware uses the value of the SCRIPT_TIMEOUT attribute.

STOP_TIMEOUT=30

The value for UPTIME_THRESHOLD represents the length of time that a resource must be up before Oracle Clusterware considers the resource to be stable. By setting a value for the UPTIME_THRESHOLD attribute, you can indicate the stability of a resource.

Enter values for this attribute as a number followed by a letter that represents seconds (s), minutes (m), hours (h), days (d), or weeks (w). For example, a value of 7h represents an uptime threshold of seven hours.

After the time period you specify for UPTIME_THRESHOLD elapses, Oracle Clusterware resets the value for RESTART_COUNT to 0 at the next resource state change event, such as stop, start, relocate, or failure. Oracle Clusterware can alert you when the value for RESTART_COUNT reaches the value that you set for RESTART_ATTEMPTS. The counter is effectively reset the next time the resource fails or restarts. The threshold represents the amount of time that restarts are to be counted and discarded. If the resource fails after the threshold, it will still restart.

Use to indicate whether a resource is a workload generating resource for what-if analysis. Possible values are yes or no.

USER_WORKLOAD=yes

Use to indicate that a resource should run where it last ran, if possible, and to not permit load-balancing that would otherwise apply. If set to 1, Oracle Clusterware attempts to start the resource where it last ran. Enabling USE_STICKINESS also disables load-balancing. The default value is 0. Possible values are 0 and 1.

USE_STICKINESS=1

This is an internally-managed attribute for an ora.* resource. You cannot edit this attribute.

The INSTANCE_COUNT attribute is an internally managed attribute that contains the number of instances that the resource currently has.

An internally managed, read-only attribute that describes what, if any, action the policy engine is currently executing on the resource. Possible values and their meanings are as follows:

• STARTING: The policy engine is currently starting the resource

• STOPPING: The policy engine is currently stopping the resource

• CLEANING: The policy engine is currently cleaning the resource

• STABLE: The policy engine is not currently executing any action on the resource

  Note, however, that the resource can still be locked as part of some other command.

For cluster_resource-type resources, this is an internally managed, read-only attribute that contains the name of the server on which the last start action for the resource succeeded.

For local_resource-type resources, this is the name of the server to which the resource instance is pinned.

An internally managed, read-only attribute that describes when the policy engine registers the current state of the resource. Note that this may either be the timestamp of when state of the resource changed or when the policy engine discovered the state, as occurs when CRSD restarts.

This is an internally-managed attribute for an ora.* resource. You cannot edit this attribute.

List of resources belonging to a resource group. Oracle Clusterware populates and updates this attribute when resources are added to the group.

An internally-managed attribute used by the Oracle Clusterware daemon to count the number of attempts to restart a resource, starting from zero up to the value specified in the RESTART_ATTEMPTS attribute. You cannot edit this attribute.

An internally-managed attribute that reflects the current state of the resource as reported by Oracle Clusterware. The state of a resource can be one of the following:

• ONLINE: The resource is online and resource monitoring is enabled (see CHECK_INTERVAL).

• OFFLINE: The resource is offline and only offline resource monitoring is enabled, if configured (see OFFLINE_CHECK_INTERVAL).

• INTERMEDIATE: The resource is either partially online or was known to be online before and subsequent attempts to determine its state have failed; resource monitoring is enabled (see CHECK_INTERVAL).

• UNKNOWN: The resource is unmanageable and its current state is unknown; manual intervention is required to resume its operation. A resource in this state is not monitored.

This is an internally-managed attribute for an ora.* resource. You cannot edit this attribute.

An internally managed, read-only attribute that contains details about the state of a resource.

The four resource states—ONLINE, OFFLINE, UNKNOWN, and INTERMEDIATE—may map to different resource-specific values, such as mounted, unmounted, and open. Resource agent developers can use the STATE_DETAILS attribute to provide a more detailed description of this mapping, resource to the resource state.

Providing details is optional. If details are not provided, then Oracle Clusterware uses only the four possible resource states. Additionally, if the agent cannot provide these details (as may also happen to the value of the resource state), then Oracle Clusterware sets the value of this attribute to provide minimal details about why the resource is in its current state.

An internal, read-only attribute that describes the desired state of a resource. Using the crsctl start resource_name or crsctl stop resource_name commands, however, can affect the value of this attribute.

This is an internally-managed attribute that contains the name of the server where the resource is starting. This value is relevant when the resource is starting.

The type of resource indicated when you create a resource. This attribute is required when creating a resource and cannot be changed after the resource is created.

The number of instances of a cluster resource that can run on a single server.