|
NAME | SYNOPSIS | DESCRIPTION | ENVIRONMENT | FILES | ATTRIBUTES | CONFORMING TO | NOTES | SEE ALSO | COLOPHON |
TZSET(3) Linux Programmer's Manual TZSET(3)
tzset, tzname, timezone, daylight - initialize time conversion infor‐
mation
#include <time.h>
void tzset (void);
extern char *tzname[2];
extern long timezone;
extern int daylight;
Feature Test Macro Requirements for glibc (see feature_test_macros(7)):
tzset(): _POSIX_C_SOURCE
tzname: _POSIX_C_SOURCE
timezone, daylight: _XOPEN_SOURCE
|| /* Glibc since 2.19: */ _DEFAULT_SOURCE
|| /* Glibc versions <= 2.19: */ _SVID_SOURCE
The tzset() function initializes the tzname variable from the TZ
environment variable. This function is automatically called by the
other time conversion functions that depend on the timezone. In a
System-V-like environment, it will also set the variables timezone
(seconds West of UTC) and daylight (to 0 if this timezone does not
have any daylight saving time rules, or to nonzero if there is a
time, past, present or future when daylight saving time applies).
If the TZ variable does not appear in the environment, the system
timezone is used. The system timezone is configured by copying, or
linking, a file in the tzfile(5) format to /etc/localtime. A
timezone database of these files may be located in the system
timezone directory (see the FILES section below).
If the TZ variable does appear in the environment, but its value is
empty, or its value cannot be interpreted using any of the formats
specified below, then Coordinated Universal Time (UTC) is used.
The value of TZ can be one of two formats. The first format is a
string of characters that directly represent the timezone to be used:
std offset[dst[offset][,start[/time],end[/time]]]
There are no spaces in the specification. The std string specifies
an abbreviation for the timezone and must be three or more alphabetic
characters. When enclosed between the less-than (<) and greater-than
(>) signs, the characters set is expanded to include the plus (+)
sign, the minus (-) sign, and digits. The offset string immediately
follows std and specifies the time value to be added to the local
time to get Coordinated Universal Time (UTC). The offset is positive
if the local timezone is west of the Prime Meridian and negative if
it is east. The hour must be between 0 and 24, and the minutes and
seconds 00 and 59:
[+|-]hh[:mm[:ss]]
The dst string and offset specify the name and offset for the
corresponding daylight saving timezone. If the offset is omitted, it
defaults to one hour ahead of standard time.
The start field specifies when daylight saving time goes into effect
and the end field specifies when the change is made back to standard
time. These fields may have the following formats:
Jn This specifies the Julian day with n between 1 and 365. Leap
days are not counted. In this format, February 29 can't be
represented; February 28 is day 59, and March 1 is always day
60.
n This specifies the zero-based Julian day with n between 0 and
365. February 29 is counted in leap years.
Mm.w.d This specifies day d (0 <= d <= 6) of week w (1 <= w <= 5) of
month m (1 <= m <= 12). Week 1 is the first week in which day
d occurs and week 5 is the last week in which day d occurs.
Day 0 is a Sunday.
The time fields specify when, in the local time currently in effect,
the change to the other time occurs. If omitted, the default is
02:00:00.
Here is an example for New Zealand, where the standard time (NZST) is
12 hours ahead of UTC, and daylight saving time (NZDT), 13 hours
ahead of UTC, runs from the first Sunday in October to the third
Sunday in March, and the changeovers happen at the default time of
02:00:00:
TZ="NZST-12:00:00NZDT-13:00:00,M10.1.0,M3.3.0"
The second format specifies that the timezone information should be
read from a file:
:[filespec]
If the file specification filespec is omitted, or its value cannot be
interpreted, then Coordinated Universal Time (UTC) is used. If
filespec is given, it specifies another tzfile(5)-format file to read
the timezone information from. If filespec does not begin with a
'/', the file specification is relative to the system timezone
directory. If the colon is omitted each of the above TZ formats will
be tried.
Here's an example, once more for New Zealand:
TZ=":Pacific/Auckland"
TZ If this variable is set its value takes precedence over the
system configured timezone.
TZDIR If this variable is set its value takes precedence over the
system configured timezone database directory path.
/etc/localtime
The system timezone file.
/usr/share/zoneinfo/
The system timezone database directory.
/usr/share/zoneinfo/posixrules
When a TZ string includes a dst timezone without anything
following it, then this file is used for the start/end rules.
It is in the tzfile(5) format. By default, the zoneinfo
Makefile hard links it to the America/New_York tzfile.
Above are the current standard file locations, but they are
configurable when glibc is compiled.
For an explanation of the terms used in this section, see
attributes(7).
┌──────────┬───────────────┬────────────────────┐
│Interface │ Attribute │ Value │
├──────────┼───────────────┼────────────────────┤
│tzset() │ Thread safety │ MT-Safe env locale │
└──────────┴───────────────┴────────────────────┘
POSIX.1-2001, POSIX.1-2008, SVr4, 4.3BSD.
4.3BSD had a function char *timezone(zone, dst) that returned the
name of the timezone corresponding to its first argument (minutes
West of UTC). If the second argument was 0, the standard name was
used, otherwise the daylight saving time version.
date(1), gettimeofday(2), time(2), ctime(3), getenv(3), tzfile(5)
This page is part of release 4.12 of the Linux man-pages project. A
description of the project, information about reporting bugs, and the
latest version of this page, can be found at
https://www.kernel.org/doc/man-pages/.
2016-03-15 TZSET(3)
Pages that refer to this page: gettimeofday(2), ctime(3), timegm(3), localtime(5), tzfile(5), environ(7), anacron(8), hwclock(8)