|
PROLOG | NAME | SYNOPSIS | DESCRIPTION | RETURN VALUE | ERRORS | EXAMPLES | APPLICATION USAGE | RATIONALE | FUTURE DIRECTIONS | SEE ALSO | COPYRIGHT |
SEM_TIMEDWAIT(3P) POSIX Programmer's Manual SEM_TIMEDWAIT(3P)
This manual page is part of the POSIX Programmer's Manual. The Linux
implementation of this interface may differ (consult the
corresponding Linux manual page for details of Linux behavior), or
the interface may not be implemented on Linux.
sem_timedwait — lock a semaphore
#include <semaphore.h>
#include <time.h>
int sem_timedwait(sem_t *restrict sem,
const struct timespec *restrict abstime);
The sem_timedwait() function shall lock the semaphore referenced by
sem as in the sem_wait() function. However, if the semaphore cannot
be locked without waiting for another process or thread to unlock the
semaphore by performing a sem_post() function, this wait shall be
terminated when the specified timeout expires.
The timeout shall expire when the absolute time specified by abstime
passes, as measured by the clock on which timeouts are based (that
is, when the value of that clock equals or exceeds abstime), or if
the absolute time specified by abstime has already been passed at the
time of the call.
The timeout shall be based on the CLOCK_REALTIME clock. The
resolution of the timeout shall be the resolution of the clock on
which it is based. The timespec data type is defined as a structure
in the <time.h> header.
Under no circumstance shall the function fail with a timeout if the
semaphore can be locked immediately. The validity of the abstime need
not be checked if the semaphore can be locked immediately.
The sem_timedwait() function shall return zero if the calling process
successfully performed the semaphore lock operation on the semaphore
designated by sem. If the call was unsuccessful, the state of the
semaphore shall be unchanged, and the function shall return a value
of −1 and set errno to indicate the error.
The sem_timedwait() function shall fail if:
EINVAL The process or thread would have blocked, and the abstime
parameter specified a nanoseconds field value less than zero
or greater than or equal to 1000 million.
ETIMEDOUT
The semaphore could not be locked before the specified timeout
expired.
The sem_timedwait() function may fail if:
EDEADLK
A deadlock condition was detected.
EINTR A signal interrupted this function.
EINVAL The sem argument does not refer to a valid semaphore.
The following sections are informative.
The program shown below operates on an unnamed semaphore. The program
expects two command-line arguments. The first argument specifies a
seconds value that is used to set an alarm timer to generate a
SIGALRM signal. This handler performs a sem_post(3) to increment the
semaphore that is being waited on in main() using sem_timedwait().
The second command-line argument specifies the length of the timeout,
in seconds, for sem_timedwait().
#include <unistd.h>
#include <stdio.h>
#include <stdlib.h>
#include <semaphore.h>
#include <time.h>
#include <assert.h>
#include <errno.h>
#include <signal.h>
sem_t sem;
static void
handler(int sig)
{
int sav_errno = errno;
static const char info_msg[] = "sem_post() from handler\n";
write(STDOUT_FILENO, info_msg, sizeof info_msg - 1);
if (sem_post(&sem) == -1) {
static const char err_msg[] = "sem_post() failed\n";
write(STDERR_FILENO, err_msg, sizeof err_msg - 1);
_exit(EXIT_FAILURE);
}
errno = sav_errno;
}
int
main(int argc, char *argv[])
{
struct sigaction sa;
struct timespec ts;
int s;
if (argc != 3) {
fprintf(stderr, "Usage: %s <alarm-secs> <wait-secs>\n",
argv[0]);
exit(EXIT_FAILURE);
}
if (sem_init(&sem, 0, 0) == -1) {
perror("sem_init");
exit(EXIT_FAILURE);
}
/* Establish SIGALRM handler; set alarm timer using argv[1] */
sa.sa_handler = handler;
sigemptyset(&sa.sa_mask);
sa.sa_flags = 0;
if (sigaction(SIGALRM, &sa, NULL) == -1) {
perror("sigaction");
exit(EXIT_FAILURE);
}
alarm(atoi(argv[1]));
/* Calculate relative interval as current time plus
number of seconds given argv[2] */
if (clock_gettime(CLOCK_REALTIME, &ts) == -1) {
perror("clock_gettime");
exit(EXIT_FAILURE);
}
ts.tv_sec += atoi(argv[2]);
printf("main() about to call sem_timedwait()\n");
while ((s = sem_timedwait(&sem, &ts)) == -1 && errno == EINTR)
continue; /* Restart if interrupted by handler */
/* Check what happened */
if (s == -1) {
if (errno == ETIMEDOUT)
printf("sem_timedwait() timed out\n");
else
perror("sem_timedwait");
} else
printf("sem_timedwait() succeeded\n");
exit((s == 0) ? EXIT_SUCCESS : EXIT_FAILURE);
}
Applications using these functions may be subject to priority
inversion, as discussed in the Base Definitions volume of
POSIX.1‐2008, Section 3.287, Priority Inversion.
None.
None.
sem_post(3p), sem_trywait(3p), semctl(3p), semget(3p), semop(3p),
time(3p)
The Base Definitions volume of POSIX.1‐2008, Section 3.287, Priority
Inversion, semaphore.h(0p), time.h(0p)
Portions of this text are reprinted and reproduced in electronic form
from IEEE Std 1003.1, 2013 Edition, Standard for Information
Technology -- Portable Operating System Interface (POSIX), The Open
Group Base Specifications Issue 7, Copyright (C) 2013 by the
Institute of Electrical and Electronics Engineers, Inc and The Open
Group. (This is POSIX.1-2008 with the 2013 Technical Corrigendum 1
applied.) In the event of any discrepancy between this version and
the original IEEE and The Open Group Standard, the original IEEE and
The Open Group Standard is the referee document. The original
Standard can be obtained online at http://www.unix.org/online.html .
Any typographical or formatting errors that appear in this page are
most likely to have been introduced during the conversion of the
source files to man page format. To report such errors, see
https://www.kernel.org/doc/man-pages/reporting_bugs.html .
IEEE/The Open Group 2013 SEM_TIMEDWAIT(3P)
Pages that refer to this page: semaphore.h(0p), time.h(0p), clock_getres(3p), sem_getvalue(3p), sem_init(3p), sem_open(3p), sem_post(3p), sem_trywait(3p)