|
PROLOG | NAME | SYNOPSIS | DESCRIPTION | OPTIONS | OPERANDS | STDIN | INPUT FILES | ENVIRONMENT VARIABLES | ASYNCHRONOUS EVENTS | STDOUT | STDERR | OUTPUT FILES | EXTENDED DESCRIPTION | EXIT STATUS | CONSEQUENCES OF ERRORS | APPLICATION USAGE | EXAMPLES | RATIONALE | FUTURE DIRECTIONS | SEE ALSO | COPYRIGHT |
SCCS(1P) POSIX Programmer's Manual SCCS(1P)
This manual page is part of the POSIX Programmer's Manual. The Linux
implementation of this interface may differ (consult the
corresponding Linux manual page for details of Linux behavior), or
the interface may not be implemented on Linux.
sccs — front end for the SCCS subsystem (DEVELOPMENT)
sccs [−r] [−d path] [−p path] command [options...] [operands...]
The sccs utility is a front end to the SCCS programs. It also
includes the capability to run set-user-id to another user to provide
additional protection.
The sccs utility shall invoke the specified command with the
specified options and operands. By default, each of the operands
shall be modified by prefixing it with the string "SCCS/s.".
The command can be the name of one of the SCCS utilities in this
volume of POSIX.1‐2008 (admin, delta, get, prs, rmdel, sact, unget,
val, or what) or one of the pseudo-utilities listed in the EXTENDED
DESCRIPTION section.
The sccs utility shall conform to the Base Definitions volume of
POSIX.1‐2008, Section 12.2, Utility Syntax Guidelines, except that
options operands are actually options to be passed to the utility
named by command. When the portion of the command:
command [options ... ] [operands ... ]
is considered, all of the pseudo-utilities used as command shall
support the Utility Syntax Guidelines. Any of the other SCCS
utilities that can be invoked in this manner support the Guidelines
to the extent indicated by their individual OPTIONS sections.
The following options shall be supported preceding the command
operand:
−d path A pathname of a directory to be used as a root directory
for the SCCS files. The default shall be the current
directory. The −d option shall take precedence over the
PROJECTDIR variable. See −p.
−p path A pathname of a directory in which the SCCS files are
located. The default shall be the SCCS directory.
The −p option differs from the −d option in that the −d
option-argument shall be prefixed to the entire pathname
and the −p option-argument shall be inserted before the
final component of the pathname. For example:
sccs −d /x −p y get a/b
converts to:
get /x/a/y/s.b
This allows the creation of aliases such as:
alias syssccs="sccs −d /usr/src"
which is used as:
syssccs get cmd/who.c
−r Invoke command with the real user ID of the process, not
any effective user ID that the sccs utility is set to.
Certain commands (admin, check, clean, diffs, info, rmdel,
and tell) cannot be run set-user-ID by all users, since
this would allow anyone to change the authorizations. These
commands are always run as the real user.
The following operands shall be supported:
command An SCCS utility name or the name of one of the pseudo-
utilities listed in the EXTENDED DESCRIPTION section.
options An option or option-argument to be passed to command.
operands An operand to be passed to command.
See the utility description for the specified command.
See the utility description for the specified command.
The following environment variables shall affect the execution of
sccs:
LANG Provide a default value for the internationalization
variables that are unset or null. (See the Base Definitions
volume of POSIX.1‐2008, Section 8.2, Internationalization
Variables for the precedence of internationalization
variables used to determine the values of locale
categories.)
LC_ALL If set to a non-empty string value, override the values of
all the other internationalization variables.
LC_CTYPE Determine the locale for the interpretation of sequences of
bytes of text data as characters (for example, single-byte
as opposed to multi-byte characters in arguments and input
files).
LC_MESSAGES
Determine the locale that should be used to affect the
format and contents of diagnostic messages written to
standard error.
NLSPATH Determine the location of message catalogs for the
processing of LC_MESSAGES.
PROJECTDIR
Provide a default value for the −d path option. If the
value of PROJECTDIR begins with a <slash>, it shall be
considered an absolute pathname; otherwise, the value of
PROJECTDIR is treated as a user name and that user's
initial working directory shall be examined for a
subdirectory src or source. If such a directory is found,
it shall be used. Otherwise, the value shall be used as a
relative pathname.
Additional environment variable effects may be found in the utility
description for the specified command.
Default.
See the utility description for the specified command.
See the utility description for the specified command.
See the utility description for the specified command.
The following pseudo-utilities shall be supported as command
operands. All options referred to in the following list are values
given in the options operands following command.
check Equivalent to info, except that nothing shall be printed if
nothing is being edited, and a non-zero exit status shall be
returned if anything is being edited. The intent is to have
this included in an ``install'' entry in a makefile to ensure
that everything is included into the SCCS file before a
version is installed.
clean Remove everything from the current directory that can be
recreated from SCCS files, but do not remove any files being
edited. If the −b option is given, branches shall be ignored
in the determination of whether they are being edited; this
is dangerous if branches are kept in the same directory.
create Create an SCCS file, taking the initial contents from the
file of the same name. Any options to admin are accepted. If
the creation is successful, the original files shall be
renamed by prefixing the basenames with a comma. These
renamed files should be removed after it has been verified
that the SCCS files have been created successfully.
delget Perform a delta on the named files and then get new versions.
The new versions shall have ID keywords expanded and shall
not be editable. Any −m, −p, −r, −s, and −y options shall be
passed to delta, and any −b, −c, −e, −i, −k, −l, −s, and −x
options shall be passed to get.
deledit Equivalent to delget, except that the get phase shall include
the −e option. This option is useful for making a checkpoint
of the current editing phase. The same options shall be
passed to delta as described above, and all the options
listed for get above except −e shall be passed to edit.
diffs Write a difference listing between the current version of the
files checked out for editing and the versions in SCCS
format. Any −r, −c, −i, −x, and −t options shall be passed to
get; any −l, −s, −e, −f, −h, and −b options shall be passed
to diff. A −C option shall be passed to diff as −c.
edit Equivalent to get −e.
fix Remove the named delta, but leave a copy of the delta with
the changes that were in it. It is useful for fixing small
compiler bugs, and so on. The application shall ensure that
it is followed by a −r SID option. Since fix does not leave
audit trails, it should be used carefully.
info Write a listing of all files being edited. If the −b option
is given, branches (that is, SIDs with two or fewer
components) shall be ignored. If a −u user option is given,
then only files being edited by the named user shall be
listed. A −U option shall be equivalent to −u<current user>.
print Write out verbose information about the named files,
equivalent to sccs prs.
tell Write a <newline>-separated list of the files being edited to
standard output. Takes the −b, −u, and −U options like info
and check.
unedit This is the opposite of an edit or a get −e. It should be
used with caution, since any changes made since the get are
lost.
The following exit values shall be returned:
0 Successful completion.
>0 An error occurred.
Default.
The following sections are informative.
Many of the SCCS utilities take directory names as operands as well
as specific filenames. The pseudo-utilities supported by sccs are not
described as having this capability, but are not prohibited from
doing so.
1. To get a file for editing, edit it and produce a new delta:
sccs get −e file.c
ex file.c
sccs delta file.c
2. To get a file from another directory:
sccs −p /usr/src/sccs/s. get cc.c
or:
sccs get /usr/src/sccs/s.cc.c
3. To make a delta of a large number of files in the current
directory:
sccs delta *.c
4. To get a list of files being edited that are not on branches:
sccs info −b
5. To delta everything being edited by the current user:
sccs delta $(sccs tell −U)
6. In a makefile, to get source files from an SCCS file if it does
not already exist:
SRCS = <list of source files>
$(SRCS):
sccs get $(REL) $@
sccs and its associated utilities are part of the XSI Development
Utilities option within the XSI option.
SCCS is an abbreviation for Source Code Control System. It is a
maintenance and enhancement tracking tool. When a file is put under
SCCS, the source code control system maintains the file and, when
changes are made, identifies and stores them in the file with the
original source code and/or documentation. As other changes are made,
they too are identified and retained in the file.
Retrieval of the original and any set of changes is possible. Any
version of the file as it develops can be reconstructed for
inspection or additional modification. History data can be stored
with each version, documenting why the changes were made, who made
them, and when they were made.
None.
admin(1p), delta(1p), get(1p), make(1p), prs(1p), rmdel(1p),
sact(1p), unget(1p), val(1p), what(1p)
The Base Definitions volume of POSIX.1‐2008, Chapter 8, Environment
Variables, Section 12.2, Utility Syntax Guidelines
Portions of this text are reprinted and reproduced in electronic form
from IEEE Std 1003.1, 2013 Edition, Standard for Information
Technology -- Portable Operating System Interface (POSIX), The Open
Group Base Specifications Issue 7, Copyright (C) 2013 by the
Institute of Electrical and Electronics Engineers, Inc and The Open
Group. (This is POSIX.1-2008 with the 2013 Technical Corrigendum 1
applied.) In the event of any discrepancy between this version and
the original IEEE and The Open Group Standard, the original IEEE and
The Open Group Standard is the referee document. The original
Standard can be obtained online at http://www.unix.org/online.html .
Any typographical or formatting errors that appear in this page are
most likely to have been introduced during the conversion of the
source files to man page format. To report such errors, see
https://www.kernel.org/doc/man-pages/reporting_bugs.html .
IEEE/The Open Group 2013 SCCS(1P)
Pages that refer to this page: make(1p), sact(1p)