|
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | ENVIRONMENT | EXAMPLES | BUGS | FILES | AUTHOR | SEE ALSO | COLOPHON |
PIDSTAT(1) Linux User's Manual PIDSTAT(1)
pidstat - Report statistics for Linux tasks.
pidstat [ -d ] [ -h ] [ -I ] [ -l ] [ -R ] [ -r ] [ -s ] [ -t ] [ -U
[ username ] ] [ -u ] [ -V ] [ -v ] [ -w ] [ -C comm ] [ -G
process_name ] [ --human ] [ -p { pid [,...] | SELF | ALL } ] [ -T {
TASK | CHILD | ALL } ] [ interval [ count ] ]
The pidstat command is used for monitoring individual tasks currently
being managed by the Linux kernel. It writes to standard output
activities for every task selected with option -p or for every task
managed by the Linux kernel if option -p ALL has been used. Not
selecting any tasks is equivalent to specifying -p ALL but only
active tasks (tasks with non-zero statistics values) will appear in
the report.
The pidstat command can also be used for monitoring the child
processes of selected tasks. Read about option -T below.
The interval parameter specifies the amount of time in seconds
between each report. A value of 0 (or no parameters at all)
indicates that tasks statistics are to be reported for the time since
system startup (boot). The count parameter can be specified in
conjunction with the interval parameter if this one is not set to
zero. The value of count determines the number of reports generated
at interval seconds apart. If the interval parameter is specified
without the count parameter, the pidstat command generates reports
continuously.
You can select information about specific task activities using
flags. Not specifying any flags selects only CPU activity.
-C comm
Display only tasks whose command name includes the string
comm. This string can be a regular expression.
-d Report I/O statistics (kernels 2.6.20 and later only). The
following values may be displayed:
UID
The real user identification number of the task being
monitored.
USER
The name of the real user owning the task being
monitored.
PID
The identification number of the task being monitored.
kB_rd/s
Number of kilobytes the task has caused to be read from
disk per second.
kB_wr/s
Number of kilobytes the task has caused, or shall cause
to be written to disk per second.
kB_ccwr/s
Number of kilobytes whose writing to disk has been
cancelled by the task. This may occur when the task
truncates some dirty pagecache. In this case, some IO
which another task has been accounted for will not be
happening.
iodelay
Block I/O delay of the task being monitored, measured
in clock ticks. This metric includes the delays spent
waiting for sync block I/O completion and for swapin
block I/O completion.
Command
The command name of the task.
-G process_name
Display only processes whose command name includes the string
process_name. This string can be a regular expression. If
option -t is used together with option -G then the threads
belonging to that process are also displayed (even if their
command name doesn't include the string process_name).
-h Display all activities horizontally on a single line. This is
intended to make it easier to be parsed by other programs.
--human
Print sizes in human readable format (e.g. 1k, 1.23M, etc.)
The units displayed with this option supersede any other
default units (e.g. kilobytes, sectors...) associated with
the metrics.
-I In an SMP environment, indicate that tasks CPU usage (as
displayed by option -u ) should be divided by the total number
of processors.
-l Display the process command name and all its arguments.
-p { pid [,...] | SELF | ALL }
Select tasks (processes) for which statistics are to be
reported. pid is the process identification number. The SELF
keyword indicates that statistics are to be reported for the
pidstat process itself, whereas the ALL keyword indicates that
statistics are to be reported for all the tasks managed by the
system.
-R Report realtime priority and scheduling policy information.
The following values may be displayed:
UID
The real user identification number of the task being
monitored.
USER
The name of the real user owning the task being
monitored.
PID
The identification number of the task being monitored.
prio
The realtime priority of the task being monitored.
policy
The scheduling policy of the task being monitored.
Command
The command name of the task.
-r Report page faults and memory utilization.
When reporting statistics for individual tasks, the following
values may be displayed:
UID
The real user identification number of the task being
monitored.
USER
The name of the real user owning the task being
monitored.
PID
The identification number of the task being monitored.
minflt/s
Total number of minor faults the task has made per
second, those which have not required loading a memory
page from disk.
majflt/s
Total number of major faults the task has made per
second, those which have required loading a memory page
from disk.
VSZ
Virtual Size: The virtual memory usage of entire task
in kilobytes.
RSS
Resident Set Size: The non-swapped physical memory used
by the task in kilobytes.
%MEM
The tasks's currently used share of available physical
memory.
Command
The command name of the task.
When reporting global statistics for tasks and all their
children, the following values may be displayed:
UID
The real user identification number of the task which
is being monitored together with its children.
USER
The name of the real user owning the task which is
being monitored together with its children.
PID
The identification number of the task which is being
monitored together with its children.
minflt-nr
Total number of minor faults made by the task and all
its children, and collected during the interval of
time.
majflt-nr
Total number of major faults made by the task and all
its children, and collected during the interval of
time.
Command
The command name of the task which is being monitored
together with its children.
-s Report stack utilization. The following values may be
displayed:
UID
The real user identification number of the task being
monitored.
USER
The name of the real user owning the task being
monitored.
PID
The identification number of the task being monitored.
StkSize
The amount of memory in kilobytes reserved for the task
as stack, but not necessarily used.
StkRef
The amount of memory in kilobytes used as stack,
referenced by the task.
Command
The command name of the task.
-T { TASK | CHILD | ALL }
This option specifies what has to be monitored by the pidstat
command. The TASK keyword indicates that statistics are to be
reported for individual tasks (this is the default option)
whereas the CHILD keyword indicates that statistics are to be
globally reported for the selected tasks and all their
children. The ALL keyword indicates that statistics are to be
reported for individual tasks and globally for the selected
tasks and their children.
Note: Global statistics for tasks and all their children are
not available for all options of pidstat. Also these
statistics are not necessarily relevant to current time
interval: The statistics of a child process are collected only
when it finishes or it is killed.
-t Also display statistics for threads associated with selected
tasks.
This option adds the following values to the reports:
TGID
The identification number of the thread group leader.
TID
The identification number of the thread being
monitored.
-U [ username ]
Display the real user name of the tasks being monitored
instead of the UID. If username is specified, then only tasks
belonging to the specified user are displayed.
-u Report CPU utilization.
When reporting statistics for individual tasks, the following
values may be displayed:
UID
The real user identification number of the task being
monitored.
USER
The name of the real user owning the task being
monitored.
PID
The identification number of the task being monitored.
%usr
Percentage of CPU used by the task while executing at
the user level (application), with or without nice
priority. Note that this field does NOT include time
spent running a virtual processor.
%system
Percentage of CPU used by the task while executing at
the system level (kernel).
%guest
Percentage of CPU spent by the task in virtual machine
(running a virtual processor).
%wait
Percentage of CPU spent by the task while waiting to
run.
%CPU
Total percentage of CPU time used by the task. In an
SMP environment, the task's CPU usage will be divided
by the total number of CPU's if option -I has been
entered on the command line.
CPU
Processor number to which the task is attached.
Command
The command name of the task.
When reporting global statistics for tasks and all their
children, the following values may be displayed:
UID
The real user identification number of the task which
is being monitored together with its children.
USER
The name of the real user owning the task which is
being monitored together with its children.
PID
The identification number of the task which is being
monitored together with its children.
usr-ms
Total number of milliseconds spent by the task and all
its children while executing at the user level
(application), with or without nice priority, and
collected during the interval of time. Note that this
field does NOT include time spent running a virtual
processor.
system-ms
Total number of milliseconds spent by the task and all
its children while executing at the system level
(kernel), and collected during the interval of time.
guest-ms
Total number of milliseconds spent by the task and all
its children in virtual machine (running a virtual
processor).
Command
The command name of the task which is being monitored
together with its children.
-V Print version number then exit.
-v Report values of some kernel tables. The following values may
be displayed:
UID
The real user identification number of the task being
monitored.
USER
The name of the real user owning the task being
monitored.
PID
The identification number of the task being monitored.
threads
Number of threads associated with current task.
fd-nr
Number of file descriptors associated with current
task.
Command
The command name of the task.
-w Report task switching activity (kernels 2.6.23 and later
only). The following values may be displayed:
UID
The real user identification number of the task being
monitored.
USER
The name of the real user owning the task being
monitored.
PID
The identification number of the task being monitored.
cswch/s
Total number of voluntary context switches the task
made per second. A voluntary context switch occurs
when a task blocks because it requires a resource that
is unavailable.
nvcswch/s
Total number of non voluntary context switches the task
made per second. A involuntary context switch takes
place when a task executes for the duration of its time
slice and then is forced to relinquish the processor.
Command
The command name of the task.
The pidstat command takes into account the following environment
variables:
S_COLORS
When this variable is set, display statistics in color on the
terminal. Possible values for this variable are never, always
or auto (the latter is the default).
Please note that the color (being red, yellow, or some other
color) used to display a value is not indicative of any kind
of issue simply because of the color. It only indicates
different ranges of values.
S_COLORS_SGR
Specify the colors and other attributes used to display
statistics on the terminal. Its value is a colon-separated
list of capabilities that defaults to
H=31;1:I=32;22:M=35;1:N=34;1:Z=34;22. Supported capabilities
are:
H= SGR (Select Graphic Rendition) substring for percentage
values greater than or equal to 75%.
I= SGR substring for item values like PID, UID or CPU
number.
M= SGR substring for percentage values in the range from
50% to 75%.
N= SGR substring for non-zero statistics values and for
tasks names.
Z= SGR substring for zero values and for threads names.
S_TIME_FORMAT
If this variable exists and its value is ISO then the current
locale will be ignored when printing the date in the report
header. The pidstat command will use the ISO 8601 format
(YYYY-MM-DD) instead. The timestamp will also be compliant
with ISO 8601 format.
pidstat 2 5
Display five reports of CPU statistics for every active task
in the system at two second intervals.
pidstat -r -p 1643 2 5
Display five reports of page faults and memory statistics for
PID 1643 at two second intervals.
pidstat -C "fox|bird" -r -p ALL
Display global page faults and memory statistics for all the
processes whose command name includes the string "fox" or
"bird".
pidstat -T CHILD -r 2 5
Display five reports of page faults statistics at two second
intervals for the child processes of all tasks in the system.
Only child processes with non-zero statistics values are
displayed.
/proc filesystem must be mounted for the pidstat command to work.
/proc contains various files with system statistics.
Sebastien Godard (sysstat <at> orange.fr)
sar(1), top(1), ps(1), mpstat(1), iostat(1), vmstat(8)
http://pagesperso-orange.fr/sebastien.godard/
This page is part of the sysstat (sysstat performance monitoring
tools) project. Information about the project can be found at
⟨http://sebastien.godard.pagesperso-orange.fr/⟩. If you have a bug
report for this manual page, send it to systat-AT-orange.fr. This
page was obtained from the project's upstream Git repository
⟨https://github.com/sysstat/sysstat.git⟩ on 2017-07-05. If you dis‐
cover any rendering problems in this HTML version of the page, or you
believe there is a better or more up-to-date source for the page, or
you have corrections or improvements to the information in this
COLOPHON (which is not part of the original manual page), send a mail
to man-pages@man7.org
Linux MAY 2017 PIDSTAT(1)
Pages that refer to this page: cifsiostat(1), iostat(1), mpstat(1), nfsiostat-sysstat(1), pcp-pidstat(1), sar(1)