|
NAME | SYNOPSIS | DESCRIPTION | COPYRIGHT | SEE ALSO | AUTHOR | COLOPHON |
MYSQLTEST(1) MariaDB Database System MYSQLTEST(1)
mysqltest - program to run test cases
mysqltest_embedded - program to run embedded test cases
mysqltest [options] [db_name]
mysqltest_embedded [options] [db_name]
The mysqltest program runs a test case against a MariaDB server and
optionally compares the output with a result file. This program reads
input written in a special test language. Typically, you invoke
mysqltest via mysql-test-run.pl rather than invoking it directly.
mysqltest_embedded is similar but is built with support for the
libmysqld embedded server.
Features of mysqltest:
· Can send SQL statements to MariaDB servers for execution
· Can execute external shell commands
· Can test whether the result from an SQL statement or shell
command is as expected
· Can connect to one or more standalone mysqld servers and switch
between connections
· Can connect to an embedded server (libmysqld), if MariaDB is
compiled with support for libmysqld. (In this case, the
executable is named mysqltest_embedded rather than mysqltest.)
By default, mysqltest reads the test case on the standard input. To
run mysqltest this way, you normally invoke it like this:
shell> mysqltest [options] [db_name] < test_file
You can also name the test case file with a --test-file=file_name
option.
The exit value from mysqltest is 0 for success, 1 for failure, and 62
if it skips the test case (for example, if after checking some
preconditions it decides not to run the test).
mysqltest supports the following options:
· --help, -?
Display a help message and exit.
· --basedir=dir_name, -b dir_name
The base directory for tests.
· --character-sets-dir=path
The directory where character sets are installed.
· --compress, -C
Compress all information sent between the client and the server
if both support compression.
· --connect-timeout=num
This can be used to set the MYSQL_OPT_CONNECT_TIMEOUT parameter
of mysql_options to change the number of seconds before an
unsuccessful connection attempt times out.
· --continue-on-error
Continue test even if we got an error. This is mostly useful when
testing a storage engine to see what from a test file it can
execute, or to find all syntax errors in a newly created big test
file.
· --cursor-protocol
Use cursors for prepared statements.
· --database=db_name, -D db_name
The default database to use.
· --debug[=debug_options], -#[debug_options]
Write a debugging log if MariaDB is built with debugging support.
The default debug_options value is
´d:t:S:i:O,/tmp/mysqltest.trace´.
· --debug-check
Print some debugging information when the program exits.
· --debug-info
Print debugging information and memory and CPU usage statistics
when the program exits.
· --host=host_name, -h host_name
Connect to the MariaDB server on the given host.
· --logdir=dir_name
The directory to use for log files.
· --mark-progress
Write the line number and elapsed time to test_file.progress.
· --max-connect-retries=num
The maximum number of connection attempts when connecting to
server.
· --max-connections=num
The maximum number of simultaneous server connections per client
(that is, per test). If not set, the maximum is 128. Minimum
allowed limit is 8, maximum is 5120.
· --no-defaults
Do not read default options from any option files. If used, this
must be the first option.
· --non-blocking-api
Use the non-blocking client API for communication.
· --overlay-dir=dir_name
Overlay directory.
· --password[=password], -p[password]
The password to use when connecting to the server. If you use the
short option form (-p), you cannot have a space between the
option and the password. If you omit the password value following
the --password or -p option on the command line, you are prompted
for one.
· --plugin-dir=dir_name
Directory for client-side plugins.
· --port=port_num, -P port_num
The TCP/IP port number to use for the connection or 0 for default
to, in order of preference, my.cnf, $MYSQL_TCP_PORT,
/etc/services, built-in default (3306).
· --prologue=name
Include the contents of the given file before processing the
contents of the test file. The included file should have the same
format as other mysqltest test files. This option has the same
effect as putting a --source file_name command as the first line
of the test file.
· --protocol={TCP|SOCKET|PIPE|MEMORY}
The connection protocol to use for connecting to the server. It
is useful when the other connection parameters normally would
cause a protocol to be used other than the one you want.
· --ps-protocol
Use the prepared-statement protocol for communication.
· --quiet
Suppress all normal output. This is a synonym for --silent.
· --record, -r
Record the output that results from running the test file into
the file named by the --result-file option, if that option is
given. It is an error to use this option without also using
--result-file.
· --result-file=file_name, -R file_name
This option specifies the file for test case expected results.
--result-file, together with --record, determines how mysqltest
treats the test actual and expected results for a test case:
· If the test produces no results, mysqltest exits with an
error message to that effect, unless --result-file is given
and the named file is an empty file.
· Otherwise, if --result-file is not given, mysqltest sends
test results to the standard output.
· With --result-file but not --record, mysqltest reads the
expected results from the given file and compares them with
the actual results. If the results do not match, mysqltest
writes a .reject file in the same directory as the result
file, outputs a diff of the two files, and exits with an
error.
· With both --result-file and --record, mysqltest updates the
given file by writing the actual test results to it.
· --result-format-version=#
Version of the result file format to use.
· --server-arg=value, -A value
Pass the argument as an argument to the embedded server. For
example, --server-arg=--tmpdir=/tmp or --server-arg=--core. Up to
64 arguments can be given.
· --server-file=file_name, -F file_name
Read arguments for the embedded server from the given file. The
file should contain one argument per line.
· --silent, -s
Suppress all normal output.
· --sleep=num, -T num
Cause all sleep commands in the test case file to sleep num
seconds. This option does not affect real_sleep commands.
An option value of 0 can be used, which effectively disables
sleep commands in the test case.
· --socket=path, -S path
The socket file to use when connecting to localhost (which is the
default host).
· --sp-protocol
Execute DML statements within a stored procedure. For every DML
statement, mysqltest creates and invokes a stored procedure that
executes the statement rather than executing the statement
directly.
· --ssl
Enable SSL for connection (automatically enabled with other
flags). Disable with --skip-ssl.
· --ssl-ca=name
CA file in PEM format (check OpenSSL docs, implies --ssl).
· --ssl-capath=name
CA directory (check OpenSSL docs, implies --ssl).
· --ssl-cert=name
X509 cert in PEM format (check OpenSSL docs, implies --ssl).
· --ssl-cipher=name
SSL cipher to use (check OpenSSL docs, implies --ssl).
· --ssl-key=name
X509 key in PEM format (check OpenSSL docs, implies --ssl).
· --ssl-crl=name
Certificate revocation list (check OpenSSL docs, implies --ssl).
· --ssl-crlpath=name
Certificate revocation list path (check OpenSSL docs, implies
--ssl).
· --ssl-verify-server-cert
Verify server's "Common Name" in its cert against hostname used
when connecting. This option is disabled by default.
· --suite-dir=dir_name
Suite directory.
· --tail-lines=nn
Specify how many lines of the result to include in the output if
the test fails because an SQL statement fails. The default is 0,
meaning no lines of result printed.
· --test-file=file_name, -x file_name
Read test input from this file. The default is to read from the
standard input.
· --timer-file=file_name, -m file_name
If given, the number of microseconds spent running the test will
be written to this file. This is used by mysql-test-run.pl for
its reporting.
· --tmpdir=dir_name, -t dir_name
The temporary directory where socket files are created.
· --user=user_name, -u user_name
The MariaDB user name to use when connecting to the server.
· --verbose, -v
Verbose mode. Print out more information about what the program
does.
· --version, -V
Display version information and exit.
· --view-protocol
Every SELECT statement is wrapped inside a view.
Copyright © 2007, 2010, Oracle and/or its affiliates, 2010-2015
MariaDB Foundation
This documentation is free software; you can redistribute it and/or
modify it only under the terms of the GNU General Public License as
published by the Free Software Foundation; version 2 of the License.
This documentation is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
You should have received a copy of the GNU General Public License
along with the program; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
02110-1301 USA or see http://www.gnu.org/licenses/.
For more information, please refer to the MariaDB Knowledge Base,
available online at https://mariadb.com/kb/
MariaDB Foundation (http://www.mariadb.org/).
This page is part of the MariaDB (MariaDB database server) project.
Information about the project can be found at ⟨http://mariadb.org/⟩.
If you have a bug report for this manual page, see
⟨https://mariadb.com/kb/en/mariadb/reporting-bugs/⟩. This page was
obtained from the project's upstream Git repository
⟨https://github.com/MariaDB/server⟩ on 2017-07-05. If you discover
any rendering problems in this HTML version of the page, or you
believe there is a better or more up-to-date source for the page, or
you have corrections or improvements to the information in this
COLOPHON (which is not part of the original manual page), send a mail
to man-pages@man7.org
MariaDB 10.1 14/12/2015 MYSQLTEST(1)