USB Gadget API for Linux

Author:David Brownell Date:20 August 2004

Introduction

This document presents a Linux-USB “Gadget” kernel mode API, for use within peripherals and other USB devices that embed Linux. It provides an overview of the API structure, and shows how that fits into a system development project. This is the first such API released on Linux to address a number of important problems, including:

• Supports USB 2.0, for high speed devices which can stream data at several dozen megabytes per second.
• Handles devices with dozens of endpoints just as well as ones with just two fixed-function ones. Gadget drivers can be written so they’re easy to port to new hardware.
• Flexible enough to expose more complex USB device capabilities such as multiple configurations, multiple interfaces, composite devices, and alternate interface settings.
• USB “On-The-Go” (OTG) support, in conjunction with updates to the Linux-USB host side.
• Sharing data structures and API models with the Linux-USB host side API. This helps the OTG support, and looks forward to more-symmetric frameworks (where the same I/O model is used by both host and device side drivers).
• Minimalist, so it’s easier to support new device controller hardware. I/O processing doesn’t imply large demands for memory or CPU resources.

Most Linux developers will not be able to use this API, since they have USB host hardware in a PC, workstation, or server. Linux users with embedded systems are more likely to have USB peripheral hardware. To distinguish drivers running inside such hardware from the more familiar Linux “USB device drivers”, which are host side proxies for the real USB devices, a different term is used: the drivers inside the peripherals are “USB gadget drivers”. In USB protocol interactions, the device driver is the master (or “client driver”) and the gadget driver is the slave (or “function driver”).

The gadget API resembles the host side Linux-USB API in that both use queues of request objects to package I/O buffers, and those requests may be submitted or canceled. They share common definitions for the standard USB Chapter 9 messages, structures, and constants. Also, both APIs bind and unbind drivers to devices. The APIs differ in detail, since the host side’s current URB framework exposes a number of implementation details and assumptions that are inappropriate for a gadget API. While the model for control transfers and configuration management is necessarily different (one side is a hardware-neutral master, the other is a hardware-aware slave), the endpoint I/0 API used here should also be usable for an overhead-reduced host side API.

Structure of Gadget Drivers

A system running inside a USB peripheral normally has at least three layers inside the kernel to handle USB protocol processing, and may have additional layers in user space code. The gadget API is used by the middle layer to interact with the lowest level (which directly handles hardware).

In Linux, from the bottom up, these layers are:

USB Controller Driver

This is the lowest software level. It is the only layer that talks to hardware, through registers, fifos, dma, irqs, and the like. The <linux/usb/gadget.h> API abstracts the peripheral controller endpoint hardware. That hardware is exposed through endpoint objects, which accept streams of IN/OUT buffers, and through callbacks that interact with gadget drivers. Since normal USB devices only have one upstream port, they only have one of these drivers. The controller driver can support any number of different gadget drivers, but only one of them can be used at a time.

Examples of such controller hardware include the PCI-based NetChip 2280 USB 2.0 high speed controller, the SA-11x0 or PXA-25x UDC (found within many PDAs), and a variety of other products.

Gadget Driver

The lower boundary of this driver implements hardware-neutral USB functions, using calls to the controller driver. Because such hardware varies widely in capabilities and restrictions, and is used in embedded environments where space is at a premium, the gadget driver is often configured at compile time to work with endpoints supported by one particular controller. Gadget drivers may be portable to several different controllers, using conditional compilation. (Recent kernels substantially simplify the work involved in supporting new hardware, by autoconfiguring endpoints automatically for many bulk-oriented drivers.) Gadget driver responsibilities include:

• handling setup requests (ep0 protocol responses) possibly including class-specific functionality
• returning configuration and string descriptors
• (re)setting configurations and interface altsettings, including enabling and configuring endpoints
• handling life cycle events, such as managing bindings to hardware, USB suspend/resume, remote wakeup, and disconnection from the USB host.
• managing IN and OUT transfers on all currently enabled endpoints

Such drivers may be modules of proprietary code, although that approach is discouraged in the Linux community.

Upper Level

Most gadget drivers have an upper boundary that connects to some Linux driver or framework in Linux. Through that boundary flows the data which the gadget driver produces and/or consumes through protocol transfers over USB. Examples include:

• user mode code, using generic (gadgetfs) or application specific files in /dev
• networking subsystem (for network gadgets, like the CDC Ethernet Model gadget driver)
• data capture drivers, perhaps video4Linux or a scanner driver; or test and measurement hardware.
• input subsystem (for HID gadgets)
• sound subsystem (for audio gadgets)
• file system (for PTP gadgets)
• block i/o subsystem (for usb-storage gadgets)
• … and more

Additional Layers

Other layers may exist. These could include kernel layers, such as network protocol stacks, as well as user mode applications building on standard POSIX system call APIs such as open(), close(), read() and write(). On newer systems, POSIX Async I/O calls may be an option. Such user mode code will not necessarily be subject to the GNU General Public License (GPL).

OTG-capable systems will also need to include a standard Linux-USB host side stack, with usbcore, one or more Host Controller Drivers (HCDs), USB Device Drivers to support the OTG “Targeted Peripheral List”, and so forth. There will also be an OTG Controller Driver, which is visible to gadget and device driver developers only indirectly. That helps the host and device side USB controllers implement the two new OTG protocols (HNP and SRP). Roles switch (host to peripheral, or vice versa) using HNP during USB suspend processing, and SRP can be viewed as a more battery-friendly kind of device wakeup protocol.

Over time, reusable utilities are evolving to help make some gadget driver tasks simpler. For example, building configuration descriptors from vectors of descriptors for the configurations interfaces and endpoints is now automated, and many drivers now use autoconfiguration to choose hardware endpoints and initialize their descriptors. A potential example of particular interest is code implementing standard USB-IF protocols for HID, networking, storage, or audio classes. Some developers are interested in KDB or KGDB hooks, to let target hardware be remotely debugged. Most such USB protocol code doesn’t need to be hardware-specific, any more than network protocols like X11, HTTP, or NFS are. Such gadget-side interface drivers should eventually be combined, to implement composite devices.

Kernel Mode Gadget API

Gadget drivers declare themselves through a struct usb_gadget_driver, which is responsible for most parts of enumeration for a struct usb_gadget. The response to a set_configuration usually involves enabling one or more of the struct usb_ep objects exposed by the gadget, and submitting one or more struct usb_request buffers to transfer data. Understand those four data types, and their operations, and you will understand how this API works.

Note

Other than the “Chapter 9” data types, most of the significant data types and functions are described here.

However, some relevant information is likely omitted from what you are reading. One example of such information is endpoint autoconfiguration. You’ll have to read the header file, and use example source code (such as that for “Gadget Zero”), to fully understand the API.

The part of the API implementing some basic driver capabilities is specific to the version of the Linux kernel that’s in use. The 2.6 and upper kernel versions include a driver model framework that has no analogue on earlier kernels; so those parts of the gadget API are not fully portable. (They are implemented on 2.4 kernels, but in a different way.) The driver model state is another part of this API that is ignored by the kerneldoc tools.

The core API does not expose every possible hardware feature, only the most widely available ones. There are significant hardware features, such as device-to-device DMA (without temporary storage in a memory buffer) that would be added using hardware-specific APIs.

This API allows drivers to use conditional compilation to handle endpoint capabilities of different hardware, but doesn’t require that. Hardware tends to have arbitrary restrictions, relating to transfer types, addressing, packet sizes, buffering, and availability. As a rule, such differences only matter for “endpoint zero” logic that handles device configuration and management. The API supports limited run-time detection of capabilities, through naming conventions for endpoints. Many drivers will be able to at least partially autoconfigure themselves. In particular, driver init sections will often have endpoint autoconfiguration logic that scans the hardware’s list of endpoints to find ones matching the driver requirements (relying on those conventions), to eliminate some of the most common reasons for conditional compilation.

Like the Linux-USB host side API, this API exposes the “chunky” nature of USB messages: I/O requests are in terms of one or more “packets”, and packet boundaries are visible to drivers. Compared to RS-232 serial protocols, USB resembles synchronous protocols like HDLC (N bytes per frame, multipoint addressing, host as the primary station and devices as secondary stations) more than asynchronous ones (tty style: 8 data bits per frame, no parity, one stop bit). So for example the controller drivers won’t buffer two single byte writes into a single two-byte USB IN packet, although gadget drivers may do so when they implement protocols where packet boundaries (and “short packets”) are not significant.

Driver Life Cycle

Gadget drivers make endpoint I/O requests to hardware without needing to know many details of the hardware, but driver setup/configuration code needs to handle some differences. Use the API like this:

1. Register a driver for the particular device side usb controller hardware, such as the net2280 on PCI (USB 2.0), sa11x0 or pxa25x as found in Linux PDAs, and so on. At this point the device is logically in the USB ch9 initial state (attached), drawing no power and not usable (since it does not yet support enumeration). Any host should not see the device, since it’s not activated the data line pullup used by the host to detect a device, even if VBUS power is available.
2. Register a gadget driver that implements some higher level device function. That will then bind() to a usb_gadget, which activates the data line pullup sometime after detecting VBUS.
3. The hardware driver can now start enumerating. The steps it handles are to accept USB power and set_address requests. Other steps are handled by the gadget driver. If the gadget driver module is unloaded before the host starts to enumerate, steps before step 7 are skipped.
4. The gadget driver’s setup() call returns usb descriptors, based both on what the bus interface hardware provides and on the functionality being implemented. That can involve alternate settings or configurations, unless the hardware prevents such operation. For OTG devices, each configuration descriptor includes an OTG descriptor.
5. The gadget driver handles the last step of enumeration, when the USB host issues a set_configuration call. It enables all endpoints used in that configuration, with all interfaces in their default settings. That involves using a list of the hardware’s endpoints, enabling each endpoint according to its descriptor. It may also involve using usb_gadget_vbus_draw to let more power be drawn from VBUS, as allowed by that configuration. For OTG devices, setting a configuration may also involve reporting HNP capabilities through a user interface.
6. Do real work and perform data transfers, possibly involving changes to interface settings or switching to new configurations, until the device is disconnect()ed from the host. Queue any number of transfer requests to each endpoint. It may be suspended and resumed several times before being disconnected. On disconnect, the drivers go back to step 3 (above).
7. When the gadget driver module is being unloaded, the driver unbind() callback is issued. That lets the controller driver be unloaded.

Drivers will normally be arranged so that just loading the gadget driver module (or statically linking it into a Linux kernel) allows the peripheral device to be enumerated, but some drivers will defer enumeration until some higher level component (like a user mode daemon) enables it. Note that at this lowest level there are no policies about how ep0 configuration logic is implemented, except that it should obey USB specifications. Such issues are in the domain of gadget drivers, including knowing about implementation constraints imposed by some USB controllers or understanding that composite devices might happen to be built by integrating reusable components.

Note that the lifecycle above can be slightly different for OTG devices. Other than providing an additional OTG descriptor in each configuration, only the HNP-related differences are particularly visible to driver code. They involve reporting requirements during the SET_CONFIGURATION request, and the option to invoke HNP during some suspend callbacks. Also, SRP changes the semantics of usb_gadget_wakeup slightly.

USB 2.0 Chapter 9 Types and Constants

Gadget drivers rely on common USB structures and constants defined in the linux/usb/ch9.h header file, which is standard in Linux 2.6+ kernels. These are the same types and constants used by host side drivers (and usbcore).

Core Objects and Methods

These are declared in <linux/usb/gadget.h>, and are used by gadget drivers to interact with USB peripheral controller drivers.

struct usb_request

describes one i/o request

Definition

struct usb_request {
  void *buf;
  unsigned length;
  dma_addr_t dma;
  struct scatterlist      *sg;
  unsigned num_sgs;
  unsigned num_mapped_sgs;
  unsigned stream_id:16;
  unsigned no_interrupt:1;
  unsigned zero:1;
  unsigned short_not_ok:1;
  unsigned dma_mapped:1;
  void (*complete)(struct usb_ep *ep, struct usb_request *req);
  void *context;
  struct list_head        list;
  unsigned frame_number;
  int status;
  unsigned actual;
};

Members

buf

Buffer used for data. Always provide this; some controllers only use PIO, or don’t use DMA for some endpoints.

length

Length of that data

dma

DMA address corresponding to ‘buf’. If you don’t set this field, and the usb controller needs one, it is responsible for mapping and unmapping the buffer.

sg

a scatterlist for SG-capable controllers.

num_sgs

number of SG entries

num_mapped_sgs

number of SG entries mapped to DMA (internal)

stream_id

The stream id, when USB3.0 bulk streams are being used

no_interrupt

If true, hints that no completion irq is needed. Helpful sometimes with deep request queues that are handled directly by DMA controllers.

zero

If true, when writing data, makes the last packet be “short” by adding a zero length packet as needed;

short_not_ok

When reading data, makes short packets be treated as errors (queue stops advancing till cleanup).

dma_mapped

Indicates if request has been mapped to DMA (internal)

complete

Function called when request completes, so this request and its buffer may be re-used. The function will always be called with interrupts disabled, and it must not sleep. Reads terminate with a short packet, or when the buffer fills, whichever comes first. When writes terminate, some data bytes will usually still be in flight (often in a hardware fifo). Errors (for reads or writes) stop the queue from advancing until the completion function returns, so that any transfers invalidated by the error may first be dequeued.

context

For use by the completion callback

list

For use by the gadget driver.

frame_number

Reports the interval number in (micro)frame in which the isochronous transfer was transmitted or received.

status

Reports completion code, zero or a negative errno. Normally, faults block the transfer queue from advancing until the completion callback returns. Code “-ESHUTDOWN” indicates completion caused by device disconnect, or when the driver disabled the endpoint.

actual

Reports bytes transferred to/from the buffer. For reads (OUT transfers) this may be less than the requested length. If the short_not_ok flag is set, short reads are treated as errors even when status otherwise indicates successful completion. Note that for writes (IN transfers) some data bytes may still reside in a device-side FIFO when the request is reported as complete.

Description

These are allocated/freed through the endpoint they’re used with. The hardware’s driver can add extra per-request data to the memory it returns, which often avoids separate memory allocations (potential failures), later when the request is queued.

Request flags affect request handling, such as whether a zero length packet is written (the “zero” flag), whether a short read should be treated as an error (blocking request queue advance, the “short_not_ok” flag), or hinting that an interrupt is not required (the “no_interrupt” flag, for use with deep request queues).

Bulk endpoints can use any size buffers, and can also be used for interrupt transfers. interrupt-only endpoints can be much less functional.

NOTE

this is analogous to ‘struct urb’ on the host side, except that it’s thinner and promotes more pre-allocation.

struct usb_ep_caps

endpoint capabilities description

Definition

struct usb_ep_caps {
  unsigned type_control:1;
  unsigned type_iso:1;
  unsigned type_bulk:1;
  unsigned type_int:1;
  unsigned dir_in:1;
  unsigned dir_out:1;
};

Members

type_control

Endpoint supports control type (reserved for ep0).

type_iso

Endpoint supports isochronous transfers.

type_bulk

Endpoint supports bulk transfers.

type_int

Endpoint supports interrupt transfers.

dir_in

Endpoint supports IN direction.

dir_out

Endpoint supports OUT direction.

struct usb_ep

device side representation of USB endpoint

Definition

struct usb_ep {
  void *driver_data;
  const char              *name;
  const struct usb_ep_ops *ops;
  struct list_head        ep_list;
  struct usb_ep_caps      caps;
  bool claimed;
  bool enabled;
  unsigned maxpacket:16;
  unsigned maxpacket_limit:16;
  unsigned max_streams:16;
  unsigned mult:2;
  unsigned maxburst:5;
  u8 address;
  const struct usb_endpoint_descriptor    *desc;
  const struct usb_ss_ep_comp_descriptor  *comp_desc;
};

Members

driver_data

for use by the gadget driver.

name

identifier for the endpoint, such as “ep-a” or “ep9in-bulk”

ops

Function pointers used to access hardware-specific operations.

ep_list

the gadget’s ep_list holds all of its endpoints

caps

The structure describing types and directions supported by endoint.

claimed

True if this endpoint is claimed by a function.

enabled

The current endpoint enabled/disabled state.

maxpacket

The maximum packet size used on this endpoint. The initial value can sometimes be reduced (hardware allowing), according to the endpoint descriptor used to configure the endpoint.

maxpacket_limit

The maximum packet size value which can be handled by this endpoint. It’s set once by UDC driver when endpoint is initialized, and should not be changed. Should not be confused with maxpacket.

max_streams

The maximum number of streams supported by this EP (0 - 16, actual number is 2^n)

mult

multiplier, ‘mult’ value for SS Isoc EPs

maxburst

the maximum number of bursts supported by this EP (for usb3)

address

used to identify the endpoint when finding descriptor that matches connection speed

desc

endpoint descriptor. This pointer is set before the endpoint is enabled and remains valid until the endpoint is disabled.

comp_desc

In case of SuperSpeed support, this is the endpoint companion descriptor that is used to configure the endpoint

Description

the bus controller driver lists all the general purpose endpoints in gadget->ep_list. the control endpoint (gadget->ep0) is not in that list, and is accessed only in response to a driver setup() callback.

struct usb_gadget

represents a usb slave device

Definition

struct usb_gadget {
  struct work_struct              work;
  struct usb_udc                  *udc;
  const struct usb_gadget_ops     *ops;
  struct usb_ep                   *ep0;
  struct list_head                ep_list;
  enum usb_device_speed           speed;
  enum usb_device_speed           max_speed;
  enum usb_device_state           state;
  const char                      *name;
  struct device                   dev;
  unsigned isoch_delay;
  unsigned out_epnum;
  unsigned in_epnum;
  unsigned mA;
  struct usb_otg_caps             *otg_caps;
  unsigned sg_supported:1;
  unsigned is_otg:1;
  unsigned is_a_peripheral:1;
  unsigned b_hnp_enable:1;
  unsigned a_hnp_support:1;
  unsigned a_alt_hnp_support:1;
  unsigned hnp_polling_support:1;
  unsigned host_request_flag:1;
  unsigned quirk_ep_out_aligned_size:1;
  unsigned quirk_altset_not_supp:1;
  unsigned quirk_stall_not_supp:1;
  unsigned quirk_zlp_not_supp:1;
  unsigned quirk_avoids_skb_reserve:1;
  unsigned is_selfpowered:1;
  unsigned deactivated:1;
  unsigned connected:1;
  unsigned lpm_capable:1;
};

Members

work

(internal use) Workqueue to be used for sysfs_notify()

udc

struct usb_udc pointer for this gadget

ops

Function pointers used to access hardware-specific operations.

ep0

Endpoint zero, used when reading or writing responses to driver setup() requests

ep_list

List of other endpoints supported by the device.

speed

Speed of current connection to USB host.

max_speed

Maximal speed the UDC can handle. UDC must support this and all slower speeds.

state

the state we are now (attached, suspended, configured, etc)

name

Identifies the controller hardware type. Used in diagnostics and sometimes configuration.

dev

Driver model state for this abstract device.

isoch_delay

value from Set Isoch Delay request. Only valid on SS/SSP

out_epnum

last used out ep number

in_epnum

last used in ep number

mA

last set mA value

otg_caps

OTG capabilities of this gadget.

sg_supported

true if we can handle scatter-gather

is_otg

True if the USB device port uses a Mini-AB jack, so that the gadget driver must provide a USB OTG descriptor.

is_a_peripheral

False unless is_otg, the “A” end of a USB cable is in the Mini-AB jack, and HNP has been used to switch roles so that the “A” device currently acts as A-Peripheral, not A-Host.

b_hnp_enable

OTG device feature flag, indicating that the A-Host enabled HNP support.

a_hnp_support

OTG device feature flag, indicating that the A-Host supports HNP at this port.

a_alt_hnp_support

OTG device feature flag, indicating that the A-Host only supports HNP on a different root port.

hnp_polling_support

OTG device feature flag, indicating if the OTG device in peripheral mode can support HNP polling.

host_request_flag

OTG device feature flag, indicating if A-Peripheral or B-Peripheral wants to take host role.

quirk_ep_out_aligned_size

epout requires buffer size to be aligned to MaxPacketSize.

quirk_altset_not_supp

UDC controller doesn’t support alt settings.

quirk_stall_not_supp

UDC controller doesn’t support stalling.

quirk_zlp_not_supp

UDC controller doesn’t support ZLP.

quirk_avoids_skb_reserve

udc/platform wants to avoid skb_reserve() in u_ether.c to improve performance.

is_selfpowered

if the gadget is self-powered.

deactivated

True if gadget is deactivated - in deactivated state it cannot be connected.

connected

True if gadget is connected.

lpm_capable

If the gadget max_speed is FULL or HIGH, this flag indicates that it supports LPM as per the LPM ECN & errata.

Description

Gadgets have a mostly-portable “gadget driver” implementing device functions, handling all usb configurations and interfaces. Gadget drivers talk to hardware-specific code indirectly, through ops vectors. That insulates the gadget driver from hardware details, and packages the hardware endpoints through generic i/o queues. The “usb_gadget” and “usb_ep” interfaces provide that insulation from the hardware.

Except for the driver data, all fields in this structure are read-only to the gadget driver. That driver data is part of the “driver model” infrastructure in 2.6 (and later) kernels, and for earlier systems is grouped in a similar structure that’s not known to the rest of the kernel.

Values of the three OTG device feature flags are updated before the setup() call corresponding to USB_REQ_SET_CONFIGURATION, and before driver suspend() calls. They are valid only when is_otg, and when the device is acting as a B-Peripheral (so is_a_peripheral is false).

size_t usb_ep_align(struct usb_ep * ep, size_t len)

returns len aligned to ep’s maxpacketsize.

Parameters

struct usb_ep * ep

the endpoint whose maxpacketsize is used to align len

size_t len

buffer size’s length to align to ep’s maxpacketsize

Description

This helper is used to align buffer’s size to an ep’s maxpacketsize.

size_t usb_ep_align_maybe(struct usb_gadget * g, struct usb_ep * ep, size_t len)

returns len aligned to ep’s maxpacketsize if gadget requires quirk_ep_out_aligned_size, otherwise returns len.

Parameters

struct usb_gadget * g

controller to check for quirk

struct usb_ep * ep

the endpoint whose maxpacketsize is used to align len

size_t len

buffer size’s length to align to ep’s maxpacketsize

Description

This helper is used in case it’s required for any reason to check and maybe align buffer’s size to an ep’s maxpacketsize.

int gadget_is_altset_supported(struct usb_gadget * g)

return true iff the hardware supports altsettings

Parameters

struct usb_gadget * g

controller to check for quirk

int gadget_is_stall_supported(struct usb_gadget * g)

return true iff the hardware supports stalling

Parameters

struct usb_gadget * g

controller to check for quirk

int gadget_is_zlp_supported(struct usb_gadget * g)

return true iff the hardware supports zlp

Parameters

struct usb_gadget * g

controller to check for quirk

int gadget_avoids_skb_reserve(struct usb_gadget * g)

return true iff the hardware would like to avoid skb_reserve to improve performance.

Parameters

struct usb_gadget * g

controller to check for quirk

int gadget_is_dualspeed(struct usb_gadget * g)

return true iff the hardware handles high speed

Parameters

struct usb_gadget * g

controller that might support both high and full speeds

int gadget_is_superspeed(struct usb_gadget * g)

return true if the hardware handles superspeed

Parameters

struct usb_gadget * g

controller that might support superspeed

int gadget_is_superspeed_plus(struct usb_gadget * g)

return true if the hardware handles superspeed plus

Parameters

struct usb_gadget * g

controller that might support superspeed plus

int gadget_is_otg(struct usb_gadget * g)

return true iff the hardware is OTG-ready

Parameters

struct usb_gadget * g

controller that might have a Mini-AB connector

Description

This is a runtime test, since kernels with a USB-OTG stack sometimes run on boards which only have a Mini-B (or Mini-A) connector.

struct usb_gadget_driver

driver for usb ‘slave’ devices

Definition

struct usb_gadget_driver {
  char *function;
  enum usb_device_speed   max_speed;
  int (*bind)(struct usb_gadget *gadget, struct usb_gadget_driver *driver);
  void (*unbind)(struct usb_gadget *);
  int (*setup)(struct usb_gadget *, const struct usb_ctrlrequest *);
  void (*disconnect)(struct usb_gadget *);
  void (*suspend)(struct usb_gadget *);
  void (*resume)(struct usb_gadget *);
  void (*reset)(struct usb_gadget *);
  struct device_driver    driver;
  char *udc_name;
  struct list_head        pending;
  unsigned match_existing_only:1;
};

Members

function

String describing the gadget’s function

max_speed

Highest speed the driver handles.

bind

the driver’s bind callback

unbind

Invoked when the driver is unbound from a gadget, usually from rmmod (after a disconnect is reported). Called in a context that permits sleeping.

setup

Invoked for ep0 control requests that aren’t handled by the hardware level driver. Most calls must be handled by the gadget driver, including descriptor and configuration management. The 16 bit members of the setup data are in USB byte order. Called in_interrupt; this may not sleep. Driver queues a response to ep0, or returns negative to stall.

disconnect

Invoked after all transfers have been stopped, when the host is disconnected. May be called in_interrupt; this may not sleep. Some devices can’t detect disconnect, so this might not be called except as part of controller shutdown.

suspend

Invoked on USB suspend. May be called in_interrupt.

resume

Invoked on USB resume. May be called in_interrupt.

reset

Invoked on USB bus reset. It is mandatory for all gadget drivers and should be called in_interrupt.

driver

Driver model state for this driver.

udc_name

A name of UDC this driver should be bound to. If udc_name is NULL, this driver will be bound to any available UDC.

pending

UDC core private data used for deferred probe of this driver.

match_existing_only

If udc is not found, return an error and don’t add this gadget driver to list of pending driver

Description

Devices are disabled till a gadget driver successfully bind()s, which means the driver will handle setup() requests needed to enumerate (and meet “chapter 9” requirements) then do some useful work.

If gadget->is_otg is true, the gadget driver must provide an OTG descriptor during enumeration, or else fail the bind() call. In such cases, no USB traffic may flow until both bind() returns without having called usb_gadget_disconnect(), and the USB host stack has initialized.

Drivers use hardware-specific knowledge to configure the usb hardware. endpoint addressing is only one of several hardware characteristics that are in descriptors the ep0 implementation returns from setup() calls.

Except for ep0 implementation, most driver code shouldn’t need change to run on top of different usb controllers. It’ll use endpoints set up by that ep0 implementation.

The usb controller driver handles a few standard usb requests. Those include set_address, and feature flags for devices, interfaces, and endpoints (the get_status, set_feature, and clear_feature requests).

Accordingly, the driver’s setup() callback must always implement all get_descriptor requests, returning at least a device descriptor and a configuration descriptor. Drivers must make sure the endpoint descriptors match any hardware constraints. Some hardware also constrains other descriptors. (The pxa250 allows only configurations 1, 2, or 3).

The driver’s setup() callback must also implement set_configuration, and should also implement set_interface, get_configuration, and get_interface. Setting a configuration (or interface) is where endpoints should be activated or (config 0) shut down.

(Note that only the default control endpoint is supported. Neither hosts nor devices generally support control traffic except to ep0.)

Most devices will ignore USB suspend/resume operations, and so will not provide those callbacks. However, some may need to change modes when the host is not longer directing those activities. For example, local controls (buttons, dials, etc) may need to be re-enabled since the (remote) host can’t do that any longer; or an error state might be cleared, to make the device behave identically whether or not power is maintained.

int usb_gadget_probe_driver(struct usb_gadget_driver * driver)

probe a gadget driver

Parameters

struct usb_gadget_driver * driver

the driver being registered

Context

can sleep

Description

Call this in your gadget driver’s module initialization function, to tell the underlying usb controller driver about your driver. The bind() function will be called to bind it to a gadget before this registration call returns. It’s expected that the bind() function will be in init sections.

int usb_gadget_unregister_driver(struct usb_gadget_driver * driver)

unregister a gadget driver

Parameters

struct usb_gadget_driver * driver

the driver being unregistered

Context

can sleep

Description

Call this in your gadget driver’s module cleanup function, to tell the underlying usb controller that your driver is going away. If the controller is connected to a USB host, it will first disconnect(). The driver is also requested to unbind() and clean up any device state, before this procedure finally returns. It’s expected that the unbind() functions will in in exit sections, so may not be linked in some kernels.

struct usb_string

wraps a C string and its USB id

Definition

struct usb_string {
  u8 id;
  const char              *s;
};

Members

id

the (nonzero) ID for this string

s

the string, in UTF-8 encoding

Description

If you’re using usb_gadget_get_string(), use this to wrap a string together with its ID.

struct usb_gadget_strings

a set of USB strings in a given language

Definition

struct usb_gadget_strings {
  u16 language;
  struct usb_string       *strings;
};

Members

language

identifies the strings’ language (0x0409 for en-us)

strings

array of strings with their ids

Description

If you’re using usb_gadget_get_string(), use this to wrap all the strings for a given language.

void usb_free_descriptors(struct usb_descriptor_header ** v)

free descriptors returned by usb_copy_descriptors()

Parameters

struct usb_descriptor_header ** v

vector of descriptors

Optional Utilities

The core API is sufficient for writing a USB Gadget Driver, but some optional utilities are provided to simplify common tasks. These utilities include endpoint autoconfiguration.

int usb_gadget_get_string(const struct usb_gadget_strings * table, int id, u8 * buf)

fill out a string descriptor

Parameters

const struct usb_gadget_strings * table

of c strings encoded using UTF-8

int id

string id, from low byte of wValue in get string descriptor

u8 * buf

at least 256 bytes, must be 16-bit aligned

Description

Finds the UTF-8 string matching the ID, and converts it into a string descriptor in utf16-le. Returns length of descriptor (always even) or negative errno

If your driver needs stings in multiple languages, you’ll probably “switch (wIndex) { … }” in your ep0 string descriptor logic, using this routine after choosing which set of UTF-8 strings to use. Note that US-ASCII is a strict subset of UTF-8; any string bytes with the eighth bit set will be multibyte UTF-8 characters, not ISO-8859/1 characters (which are also widely used in C strings).

int usb_descriptor_fillbuf(void * buf, unsigned buflen, const struct usb_descriptor_header ** src)

fill buffer with descriptors

Parameters

void * buf

Buffer to be filled

unsigned buflen

Size of buf

const struct usb_descriptor_header ** src

Array of descriptor pointers, terminated by null pointer.

Description

Copies descriptors into the buffer, returning the length or a negative error code if they can’t all be copied. Useful when assembling descriptors for an associated set of interfaces used as part of configuring a composite device; or in other cases where sets of descriptors need to be marshaled.

int usb_gadget_config_buf(const struct usb_config_descriptor * config, void * buf, unsigned length, const struct usb_descriptor_header ** desc)

builts a complete configuration descriptor

Parameters

const struct usb_config_descriptor * config

Header for the descriptor, including characteristics such as power requirements and number of interfaces.

void * buf

Buffer for the resulting configuration descriptor.

unsigned length

Length of buffer. If this is not big enough to hold the entire configuration descriptor, an error code will be returned.

const struct usb_descriptor_header ** desc

Null-terminated vector of pointers to the descriptors (interface, endpoint, etc) defining all functions in this device configuration.

Description

This copies descriptors into the response buffer, building a descriptor for that configuration. It returns the buffer length or a negative status code. The config.wTotalLength field is set to match the length of the result, but other descriptor fields (including power usage and interface count) must be set by the caller.

Gadget drivers could use this when constructing a config descriptor in response to USB_REQ_GET_DESCRIPTOR. They will need to patch the resulting bDescriptorType value if USB_DT_OTHER_SPEED_CONFIG is needed.

struct usb_descriptor_header ** usb_copy_descriptors(struct usb_descriptor_header ** src)

copy a vector of USB descriptors

Parameters

struct usb_descriptor_header ** src

null-terminated vector to copy

Context

initialization code, which may sleep

Description

This makes a copy of a vector of USB descriptors. Its primary use is to support usb_function objects which can have multiple copies, each needing different descriptors. Functions may have static tables of descriptors, which are used as templates and customized with identifiers (for interfaces, strings, endpoints, and more) as needed by a given function instance.

Composite Device Framework

The core API is sufficient for writing drivers for composite USB devices (with more than one function in a given configuration), and also multi-configuration devices (also more than one function, but not necessarily sharing a given configuration). There is however an optional framework which makes it easier to reuse and combine functions.

Devices using this framework provide a struct usb_composite_driver, which in turn provides one or more struct usb_configuration instances. Each such configuration includes at least one struct usb_function, which packages a user visible role such as “network link” or “mass storage device”. Management functions may also exist, such as “Device Firmware Upgrade”.

struct usb_os_desc_ext_prop

describes one “Extended Property”

Definition

struct usb_os_desc_ext_prop {
  struct list_head        entry;
  u8 type;
  int name_len;
  char *name;
  int data_len;
  char *data;
  struct config_item      item;
};

Members

entry

used to keep a list of extended properties

type

Extended Property type

name_len

Extended Property unicode name length, including terminating ‘0’

name

Extended Property name

data_len

Length of Extended Property blob (for unicode store double len)

data

Extended Property blob

item

Represents this Extended Property in configfs

struct usb_os_desc

describes OS descriptors associated with one interface

Definition

struct usb_os_desc {
  char *ext_compat_id;
  struct list_head        ext_prop;
  int ext_prop_len;
  int ext_prop_count;
  struct mutex            *opts_mutex;
  struct config_group     group;
  struct module           *owner;
};

Members

ext_compat_id

16 bytes of “Compatible ID” and “Subcompatible ID”

ext_prop

Extended Properties list

ext_prop_len

Total length of Extended Properties blobs

ext_prop_count

Number of Extended Properties

opts_mutex

Optional mutex protecting config data of a usb_function_instance

group

Represents OS descriptors associated with an interface in configfs

owner

Module associated with this OS descriptor

struct usb_os_desc_table

describes OS descriptors associated with one interface of a usb_function

Definition

struct usb_os_desc_table {
  int if_id;
  struct usb_os_desc      *os_desc;
};

Members

if_id

Interface id

os_desc

“Extended Compatibility ID” and “Extended Properties” of the interface

Description

Each interface can have at most one “Extended Compatibility ID” and a number of “Extended Properties”.

struct usb_function

describes one function of a configuration

Definition

struct usb_function {
  const char                      *name;
  struct usb_gadget_strings       **strings;
  struct usb_descriptor_header    **fs_descriptors;
  struct usb_descriptor_header    **hs_descriptors;
  struct usb_descriptor_header    **ss_descriptors;
  struct usb_descriptor_header    **ssp_descriptors;
  struct usb_configuration        *config;
  struct usb_os_desc_table        *os_desc_table;
  unsigned os_desc_n;
  int (*bind)(struct usb_configuration *, struct usb_function *);
  void (*unbind)(struct usb_configuration *, struct usb_function *);
  void (*free_func)(struct usb_function *f);
  struct module           *mod;
  int (*set_alt)(struct usb_function *, unsigned interface, unsigned alt);
  int (*get_alt)(struct usb_function *, unsigned interface);
  void (*disable)(struct usb_function *);
  int (*setup)(struct usb_function *, const struct usb_ctrlrequest *);
  bool (*req_match)(struct usb_function *,const struct usb_ctrlrequest *, bool config0);
  void (*suspend)(struct usb_function *);
  void (*resume)(struct usb_function *);
  int (*get_status)(struct usb_function *);
  int (*func_suspend)(struct usb_function *, u8 suspend_opt);
};

Members

name

For diagnostics, identifies the function.

strings

tables of strings, keyed by identifiers assigned during bind() and by language IDs provided in control requests

fs_descriptors

Table of full (or low) speed descriptors, using interface and string identifiers assigned during bind(). If this pointer is null, the function will not be available at full speed (or at low speed).

hs_descriptors

Table of high speed descriptors, using interface and string identifiers assigned during bind(). If this pointer is null, the function will not be available at high speed.

ss_descriptors

Table of super speed descriptors, using interface and string identifiers assigned during bind(). If this pointer is null after initiation, the function will not be available at super speed.

ssp_descriptors

Table of super speed plus descriptors, using interface and string identifiers assigned during bind(). If this pointer is null after initiation, the function will not be available at super speed plus.

config

assigned when usb_add_function() is called; this is the configuration with which this function is associated.

os_desc_table

Table of (interface id, os descriptors) pairs. The function can expose more than one interface. If an interface is a member of an IAD, only the first interface of IAD has its entry in the table.

os_desc_n

Number of entries in os_desc_table

bind

Before the gadget can register, all of its functions bind() to the available resources including string and interface identifiers used in interface or class descriptors; endpoints; I/O buffers; and so on.

unbind

Reverses bind; called as a side effect of unregistering the driver which added this function.

free_func

free the struct usb_function.

mod

(internal) points to the module that created this structure.

set_alt

(REQUIRED) Reconfigures altsettings; function drivers may initialize usb_ep.driver data at this time (when it is used). Note that setting an interface to its current altsetting resets interface state, and that all interfaces have a disabled state.

get_alt

Returns the active altsetting. If this is not provided, then only altsetting zero is supported.

disable

(REQUIRED) Indicates the function should be disabled. Reasons include host resetting or reconfiguring the gadget, and disconnection.

setup

Used for interface-specific control requests.

req_match

Tests if a given class request can be handled by this function.

suspend

Notifies functions when the host stops sending USB traffic.

resume

Notifies functions when the host restarts USB traffic.

get_status

Returns function status as a reply to GetStatus() request when the recipient is Interface.

func_suspend

callback to be called when SetFeature(FUNCTION_SUSPEND) is reseived

Description

A single USB function uses one or more interfaces, and should in most cases support operation at both full and high speeds. Each function is associated by usb_add_function() with a one configuration; that function causes bind() to be called so resources can be allocated as part of setting up a gadget driver. Those resources include endpoints, which should be allocated using usb_ep_autoconfig().

To support dual speed operation, a function driver provides descriptors for both high and full speed operation. Except in rare cases that don’t involve bulk endpoints, each speed needs different endpoint descriptors.

Function drivers choose their own strategies for managing instance data. The simplest strategy just declares it “static’, which means the function can only be activated once. If the function needs to be exposed in more than one configuration at a given speed, it needs to support multiple usb_function structures (one for each configuration).

A more complex strategy might encapsulate a usb_function structure inside a driver-specific instance structure to allows multiple activations. An example of multiple activations might be a CDC ACM function that supports two or more distinct instances within the same configuration, providing several independent logical data links to a USB host.

struct usb_configuration

represents one gadget configuration

Definition

struct usb_configuration {
  const char                      *label;
  struct usb_gadget_strings       **strings;
  const struct usb_descriptor_header **descriptors;
  void (*unbind)(struct usb_configuration *);
  int (*setup)(struct usb_configuration *, const struct usb_ctrlrequest *);
  u8 bConfigurationValue;
  u8 iConfiguration;
  u8 bmAttributes;
  u16 MaxPower;
  struct usb_composite_dev        *cdev;
};

Members

label

For diagnostics, describes the configuration.

strings

Tables of strings, keyed by identifiers assigned during bind() and by language IDs provided in control requests.

descriptors

Table of descriptors preceding all function descriptors. Examples include OTG and vendor-specific descriptors.

unbind

Reverses bind; called as a side effect of unregistering the driver which added this configuration.

setup

Used to delegate control requests that aren’t handled by standard device infrastructure or directed at a specific interface.

bConfigurationValue

Copied into configuration descriptor.

iConfiguration

Copied into configuration descriptor.

bmAttributes

Copied into configuration descriptor.

MaxPower

Power consumtion in mA. Used to compute bMaxPower in the configuration descriptor after considering the bus speed.

cdev

assigned by usb_add_config() before calling bind(); this is the device associated with this configuration.

Description

Configurations are building blocks for gadget drivers structured around function drivers. Simple USB gadgets require only one function and one configuration, and handle dual-speed hardware by always providing the same functionality. Slightly more complex gadgets may have more than one single-function configuration at a given speed; or have configurations that only work at one speed.

Composite devices are, by definition, ones with configurations which include more than one function.

The lifecycle of a usb_configuration includes allocation, initialization of the fields described above, and calling usb_add_config() to set up internal data and bind it to a specific device. The configuration’s bind() method is then used to initialize all the functions and then call usb_add_function() for them.

Those functions would normally be independent of each other, but that’s not mandatory. CDC WMC devices are an example where functions often depend on other functions, with some functions subsidiary to others. Such interdependency may be managed in any way, so long as all of the descriptors complete by the time the composite driver returns from its bind() routine.

struct usb_composite_driver

groups configurations into a gadget

Definition

struct usb_composite_driver {
  const char                              *name;
  const struct usb_device_descriptor      *dev;
  struct usb_gadget_strings               **strings;
  enum usb_device_speed                   max_speed;
  unsigned needs_serial:1;
  int (*bind)(struct usb_composite_dev *cdev);
  int (*unbind)(struct usb_composite_dev *);
  void (*disconnect)(struct usb_composite_dev *);
  void (*suspend)(struct usb_composite_dev *);
  void (*resume)(struct usb_composite_dev *);
  struct usb_gadget_driver                gadget_driver;
};

Members

name

For diagnostics, identifies the driver.

dev

Template descriptor for the device, including default device identifiers.

strings

tables of strings, keyed by identifiers assigned during bind and language IDs provided in control requests. Note: The first entries are predefined. The first entry that may be used is USB_GADGET_FIRST_AVAIL_IDX

max_speed

Highest speed the driver supports.

needs_serial

set to 1 if the gadget needs userspace to provide a serial number. If one is not provided, warning will be printed.

bind

(REQUIRED) Used to allocate resources that are shared across the whole device, such as string IDs, and add its configurations using usb_add_config(). This may fail by returning a negative errno value; it should return zero on successful initialization.

unbind

Reverses bind; called as a side effect of unregistering this driver.

disconnect

optional driver disconnect method

suspend

Notifies when the host stops sending USB traffic, after function notifications

resume

Notifies configuration when the host restarts USB traffic, before function notifications

gadget_driver

Gadget driver controlling this driver

Description

Devices default to reporting self powered operation. Devices which rely on bus powered operation should report this in their bind method.

Before returning from bind, various fields in the template descriptor may be overridden. These include the idVendor/idProduct/bcdDevice values normally to bind the appropriate host side driver, and the three strings (iManufacturer, iProduct, iSerialNumber) normally used to provide user meaningful device identifiers. (The strings will not be defined unless they are defined in dev and strings.) The correct ep0 maxpacket size is also reported, as defined by the underlying controller driver.

module_usb_composite_driver(__usb_composite_driver)

Helper macro for registering a USB gadget composite driver

Parameters

__usb_composite_driver

usb_composite_driver struct

Description

Helper macro for USB gadget composite drivers which do not do anything special in module init/exit. This eliminates a lot of boilerplate. Each module may only use this macro once, and calling it replaces module_init() and module_exit()

struct usb_composite_dev

represents one composite usb gadget

Definition

struct usb_composite_dev {
  struct usb_gadget               *gadget;
  struct usb_request              *req;
  struct usb_request              *os_desc_req;
  struct usb_configuration        *config;
  u8 qw_sign[OS_STRING_QW_SIGN_LEN];
  u8 b_vendor_code;
  struct usb_configuration        *os_desc_config;
  unsigned int                    use_os_string:1;
  unsigned int                    setup_pending:1;
  unsigned int                    os_desc_pending:1;
};

Members

gadget

read-only, abstracts the gadget’s usb peripheral controller

req

used for control responses; buffer is pre-allocated

os_desc_req

used for OS descriptors responses; buffer is pre-allocated

config

the currently active configuration

qw_sign

qwSignature part of the OS string

b_vendor_code

bMS_VendorCode part of the OS string

os_desc_config

the configuration to be used with OS descriptors

use_os_string

false by default, interested gadgets set it

setup_pending

true when setup request is queued but not completed

os_desc_pending

true when os_desc request is queued but not completed

Description

One of these devices is allocated and initialized before the associated device driver’s bind() is called.

OPEN ISSUE: it appears that some WUSB devices will need to be built by combining a normal (wired) gadget with a wireless one. This revision of the gadget framework should probably try to make sure doing that won’t hurt too much.

One notion for how to handle Wireless USB devices involves:

1. a second gadget here, discovery mechanism TBD, but likely needing separate “register/unregister WUSB gadget” calls;
2. updates to usb_gadget to include flags “is it wireless”, “is it wired”, plus (presumably in a wrapper structure) bandgroup and PHY info;
3. presumably a wireless_ep wrapping a usb_ep, and reporting wireless-specific parameters like maxburst and maxsequence;
4. configurations that are specific to wireless links;
5. function drivers that understand wireless configs and will support wireless for (additional) function instances;
6. a function to support association setup (like CBAF), not necessarily requiring a wireless adapter;
7. composite device setup that can create one or more wireless configs, including appropriate association setup support;
8. more, TBD.

int config_ep_by_speed(struct usb_gadget * g, struct usb_function * f, struct usb_ep * _ep)

configures the given endpoint according to gadget speed.

Parameters

struct usb_gadget * g

pointer to the gadget

struct usb_function * f

usb function

struct usb_ep * _ep

the endpoint to configure

Return

error code, 0 on success

This function chooses the right descriptors for a given endpoint according to gadget speed and saves it in the endpoint desc field. If the endpoint already has a descriptor assigned to it - overwrites it with currently corresponding descriptor. The endpoint maxpacket field is updated according to the chosen descriptor.

Note

the supplied function should hold all the descriptors for supported speeds

int usb_add_function(struct usb_configuration * config, struct usb_function * function)

add a function to a configuration

Parameters

struct usb_configuration * config

the configuration

struct usb_function * function

the function being added

Context

single threaded during gadget setup

Description

After initialization, each configuration must have one or more functions added to it. Adding a function involves calling its bind() method to allocate resources such as interface and string identifiers and endpoints.

This function returns the value of the function’s bind(), which is zero for success else a negative errno value.

int usb_function_deactivate(struct usb_function * function)

prevent function and gadget enumeration

Parameters

struct usb_function * function

the function that isn’t yet ready to respond

Description

Blocks response of the gadget driver to host enumeration by preventing the data line pullup from being activated. This is normally called during bind() processing to change from the initial “ready to respond” state, or when a required resource becomes available.

For example, drivers that serve as a passthrough to a userspace daemon can block enumeration unless that daemon (such as an OBEX, MTP, or print server) is ready to handle host requests.

Not all systems support software control of their USB peripheral data pullups.

Returns zero on success, else negative errno.

int usb_function_activate(struct usb_function * function)

allow function and gadget enumeration

Parameters

struct usb_function * function

function on which usb_function_activate() was called

Description

Reverses effect of usb_function_deactivate(). If no more functions are delaying their activation, the gadget driver will respond to host enumeration procedures.

Returns zero on success, else negative errno.

int usb_interface_id(struct usb_configuration * config, struct usb_function * function)

allocate an unused interface ID

Parameters

struct usb_configuration * config

configuration associated with the interface

struct usb_function * function

function handling the interface

Context

single threaded during gadget setup

Description

usb_interface_id() is called from usb_function.bind() callbacks to allocate new interface IDs. The function driver will then store that ID in interface, association, CDC union, and other descriptors. It will also handle any control requests targeted at that interface, particularly changing its altsetting via set_alt(). There may also be class-specific or vendor-specific requests to handle.

All interface identifier should be allocated using this routine, to ensure that for example different functions don’t wrongly assign different meanings to the same identifier. Note that since interface identifiers are configuration-specific, functions used in more than one configuration (or more than once in a given configuration) need multiple versions of the relevant descriptors.

Returns the interface ID which was allocated; or -ENODEV if no more interface IDs can be allocated.

int usb_add_config(struct usb_composite_dev * cdev, struct usb_configuration * config, int (*bind) (struct usb_configuration *)

add a configuration to a device.

Parameters

struct usb_composite_dev * cdev

wraps the USB gadget

struct usb_configuration * config

the configuration, with bConfigurationValue assigned

int (*)(struct usb_configuration *) bind

the configuration’s bind function

Context

single threaded during gadget setup

Description

One of the main tasks of a composite bind() routine is to add each of the configurations it supports, using this routine.

This function returns the value of the configuration’s bind(), which is zero for success else a negative errno value. Binding configurations assigns global resources including string IDs, and per-configuration resources such as interface IDs and endpoints.

int usb_string_id(struct usb_composite_dev * cdev)

allocate an unused string ID

Parameters

struct usb_composite_dev * cdev

the device whose string descriptor IDs are being allocated

Context

single threaded during gadget setup

Description

usb_string_id() is called from bind() callbacks to allocate string IDs. Drivers for functions, configurations, or gadgets will then store that ID in the appropriate descriptors and string table.

All string identifier should be allocated using this, usb_string_ids_tab() or usb_string_ids_n() routine, to ensure that for example different functions don’t wrongly assign different meanings to the same identifier.

int usb_string_ids_tab(struct usb_composite_dev * cdev, struct usb_string * str)

allocate unused string IDs in batch

Parameters

struct usb_composite_dev * cdev

the device whose string descriptor IDs are being allocated

struct usb_string * str

an array of usb_string objects to assign numbers to

Context

single threaded during gadget setup

Description

usb_string_ids() is called from bind() callbacks to allocate string IDs. Drivers for functions, configurations, or gadgets will then copy IDs from the string table to the appropriate descriptors and string table for other languages.

All string identifier should be allocated using this, usb_string_id() or usb_string_ids_n() routine, to ensure that for example different functions don’t wrongly assign different meanings to the same identifier.

struct usb_string * usb_gstrings_attach(struct usb_composite_dev * cdev, struct usb_gadget_strings ** sp, unsigned n_strings)

attach gadget strings to a cdev and assign ids

Parameters

struct usb_composite_dev * cdev

the device whose string descriptor IDs are being allocated and attached.

struct usb_gadget_strings ** sp

an array of usb_gadget_strings to attach.

unsigned n_strings

number of entries in each usb_strings array (sp[]->strings)

Description

This function will create a deep copy of usb_gadget_strings and usb_string and attach it to the cdev. The actual string (usb_string.s) will not be copied but only a referenced will be made. The struct usb_gadget_strings array may contain multiple languages and should be NULL terminated. The ->language pointer of each struct usb_gadget_strings has to contain the same amount of entries. For instance: sp[0] is en-US, sp[1] is es-ES. It is expected that the first usb_string entry of es-ES contains the translation of the first usb_string entry of en-US. Therefore both entries become the same id assign.

int usb_string_ids_n(struct usb_composite_dev * c, unsigned n)

allocate unused string IDs in batch

Parameters

struct usb_composite_dev * c

the device whose string descriptor IDs are being allocated

unsigned n

number of string IDs to allocate

Context

single threaded during gadget setup

Description

Returns the first requested ID. This ID and next n-1 IDs are now valid IDs. At least provided that n is non-zero because if it is, returns last requested ID which is now very useful information.

usb_string_ids_n() is called from bind() callbacks to allocate string IDs. Drivers for functions, configurations, or gadgets will then store that ID in the appropriate descriptors and string table.

All string identifier should be allocated using this, usb_string_id() or usb_string_ids_n() routine, to ensure that for example different functions don’t wrongly assign different meanings to the same identifier.

int usb_composite_probe(struct usb_composite_driver * driver)

register a composite driver

Parameters

struct usb_composite_driver * driver

the driver to register

Context

single threaded during gadget setup

Description

This function is used to register drivers using the composite driver framework. The return value is zero, or a negative errno value. Those values normally come from the driver’s bind method, which does all the work of setting up the driver to match the hardware.

On successful return, the gadget is ready to respond to requests from the host, unless one of its components invokes usb_gadget_disconnect() while it was binding. That would usually be done in order to wait for some userspace participation.

void usb_composite_unregister(struct usb_composite_driver * driver)

unregister a composite driver

Parameters

struct usb_composite_driver * driver

the driver to unregister

Description

This function is used to unregister drivers using the composite driver framework.

void usb_composite_setup_continue(struct usb_composite_dev * cdev)

Continue with the control transfer

Parameters

struct usb_composite_dev * cdev

the composite device who’s control transfer was kept waiting

Description

This function must be called by the USB function driver to continue with the control transfer’s data/status stage in case it had requested to delay the data/status stages. A USB function’s setup handler (e.g. set_alt()) can request the composite framework to delay the setup request’s data/status stages by returning USB_GADGET_DELAYED_STATUS.

Composite Device Functions

At this writing, a few of the current gadget drivers have been converted to this framework. Near-term plans include converting all of them, except for gadgetfs.

Peripheral Controller Drivers

The first hardware supporting this API was the NetChip 2280 controller, which supports USB 2.0 high speed and is based on PCI. This is the net2280 driver module. The driver supports Linux kernel versions 2.4 and 2.6; contact NetChip Technologies for development boards and product information.

Other hardware working in the gadget framework includes: Intel’s PXA 25x and IXP42x series processors (pxa2xx_udc), Toshiba TC86c001 “Goku-S” (goku_udc), Renesas SH7705/7727 (sh_udc), MediaQ 11xx (mq11xx_udc), Hynix HMS30C7202 (h7202_udc), National 9303/4 (n9604_udc), Texas Instruments OMAP (omap_udc), Sharp LH7A40x (lh7a40x_udc), and more. Most of those are full speed controllers.

At this writing, there are people at work on drivers in this framework for several other USB device controllers, with plans to make many of them be widely available.

A partial USB simulator, the dummy_hcd driver, is available. It can act like a net2280, a pxa25x, or an sa11x0 in terms of available endpoints and device speeds; and it simulates control, bulk, and to some extent interrupt transfers. That lets you develop some parts of a gadget driver on a normal PC, without any special hardware, and perhaps with the assistance of tools such as GDB running with User Mode Linux. At least one person has expressed interest in adapting that approach, hooking it up to a simulator for a microcontroller. Such simulators can help debug subsystems where the runtime hardware is unfriendly to software development, or is not yet available.

Support for other controllers is expected to be developed and contributed over time, as this driver framework evolves.

Gadget Drivers

In addition to Gadget Zero (used primarily for testing and development with drivers for usb controller hardware), other gadget drivers exist.

There’s an ethernet gadget driver, which implements one of the most useful Communications Device Class (CDC) models. One of the standards for cable modem interoperability even specifies the use of this ethernet model as one of two mandatory options. Gadgets using this code look to a USB host as if they’re an Ethernet adapter. It provides access to a network where the gadget’s CPU is one host, which could easily be bridging, routing, or firewalling access to other networks. Since some hardware can’t fully implement the CDC Ethernet requirements, this driver also implements a “good parts only” subset of CDC Ethernet. (That subset doesn’t advertise itself as CDC Ethernet, to avoid creating problems.)

Support for Microsoft’s RNDIS protocol has been contributed by Pengutronix and Auerswald GmbH. This is like CDC Ethernet, but it runs on more slightly USB hardware (but less than the CDC subset). However, its main claim to fame is being able to connect directly to recent versions of Windows, using drivers that Microsoft bundles and supports, making it much simpler to network with Windows.

There is also support for user mode gadget drivers, using gadgetfs. This provides a User Mode API that presents each endpoint as a single file descriptor. I/O is done using normal read() and read() calls. Familiar tools like GDB and pthreads can be used to develop and debug user mode drivers, so that once a robust controller driver is available many applications for it won’t require new kernel mode software. Linux 2.6 Async I/O (AIO) support is available, so that user mode software can stream data with only slightly more overhead than a kernel driver.

There’s a USB Mass Storage class driver, which provides a different solution for interoperability with systems such as MS-Windows and MacOS. That Mass Storage driver uses a file or block device as backing store for a drive, like the loop driver. The USB host uses the BBB, CB, or CBI versions of the mass storage class specification, using transparent SCSI commands to access the data from the backing store.

There’s a “serial line” driver, useful for TTY style operation over USB. The latest version of that driver supports CDC ACM style operation, like a USB modem, and so on most hardware it can interoperate easily with MS-Windows. One interesting use of that driver is in boot firmware (like a BIOS), which can sometimes use that model with very small systems without real serial lines.

Support for other kinds of gadget is expected to be developed and contributed over time, as this driver framework evolves.

USB On-The-GO (OTG)

USB OTG support on Linux 2.6 was initially developed by Texas Instruments for OMAP 16xx and 17xx series processors. Other OTG systems should work in similar ways, but the hardware level details could be very different.

Systems need specialized hardware support to implement OTG, notably including a special Mini-AB jack and associated transceiver to support Dual-Role operation: they can act either as a host, using the standard Linux-USB host side driver stack, or as a peripheral, using this gadget framework. To do that, the system software relies on small additions to those programming interfaces, and on a new internal component (here called an “OTG Controller”) affecting which driver stack connects to the OTG port. In each role, the system can re-use the existing pool of hardware-neutral drivers, layered on top of the controller driver interfaces (usb_bus or usb_gadget). Such drivers need at most minor changes, and most of the calls added to support OTG can also benefit non-OTG products.

• Gadget drivers test the is_otg flag, and use it to determine whether or not to include an OTG descriptor in each of their configurations.

• Gadget drivers may need changes to support the two new OTG protocols, exposed in new gadget attributes such as b_hnp_enable flag. HNP support should be reported through a user interface (two LEDs could suffice), and is triggered in some cases when the host suspends the peripheral. SRP support can be user-initiated just like remote wakeup, probably by pressing the same button.

• On the host side, USB device drivers need to be taught to trigger HNP at appropriate moments, using usb_suspend_device(). That also conserves battery power, which is useful even for non-OTG configurations.

• Also on the host side, a driver must support the OTG “Targeted Peripheral List”. That’s just a whitelist, used to reject peripherals not supported with a given Linux OTG host. This whitelist is product-specific; each product must modify otg_whitelist.h to match its interoperability specification.

  Non-OTG Linux hosts, like PCs and workstations, normally have some solution for adding drivers, so that peripherals that aren’t recognized can eventually be supported. That approach is unreasonable for consumer products that may never have their firmware upgraded, and where it’s usually unrealistic to expect traditional PC/workstation/server kinds of support model to work. For example, it’s often impractical to change device firmware once the product has been distributed, so driver bugs can’t normally be fixed if they’re found after shipment.

Additional changes are needed below those hardware-neutral usb_bus and usb_gadget driver interfaces; those aren’t discussed here in any detail. Those affect the hardware-specific code for each USB Host or Peripheral controller, and how the HCD initializes (since OTG can be active only on a single port). They also involve what may be called an OTG Controller Driver, managing the OTG transceiver and the OTG state machine logic as well as much of the root hub behavior for the OTG port. The OTG controller driver needs to activate and deactivate USB controllers depending on the relevant device role. Some related changes were needed inside usbcore, so that it can identify OTG-capable devices and respond appropriately to HNP or SRP protocols.