*Using pipelining to speedup Redis queries

*Request/Response protocols and RTT

Redis is a TCP server using the client-server model and what is called a Request/Response protocol.

This means that usually a request is accomplished with the following steps:

  • The client sends a query to the server, and reads from the socket, usually in a blocking way, for the server response.
  • The server processes the command and sends the response back to the client.

So for instance a four commands sequence is something like this:

  • Client: INCR X
  • Server: 1
  • Client: INCR X
  • Server: 2
  • Client: INCR X
  • Server: 3
  • Client: INCR X
  • Server: 4

Clients and Servers are connected via a networking link. Such a link can be very fast (a loopback interface) or very slow (a connection established over the Internet with many hops between the two hosts). Whatever the network latency is, there is a time for the packets to travel from the client to the server, and back from the server to the client to carry the reply.

This time is called RTT (Round Trip Time). It is very easy to see how this can affect the performances when a client needs to perform many requests in a row (for instance adding many elements to the same list, or populating a database with many keys). For instance if the RTT time is 250 milliseconds (in the case of a very slow link over the Internet), even if the server is able to process 100k requests per second, we'll be able to process at max four requests per second.

If the interface used is a loopback interface, the RTT is much shorter (for instance my host reports 0,044 milliseconds pinging 127.0.0.1), but it is still a lot if you need to perform many writes in a row.

Fortunately there is a way to improve this use case.

*Redis Pipelining

A Request/Response server can be implemented so that it is able to process new requests even if the client didn't already read the old responses. This way it is possible to send multiple commands to the server without waiting for the replies at all, and finally read the replies in a single step.

This is called pipelining, and is a technique widely in use since many decades. For instance many POP3 protocol implementations already supported this feature, dramatically speeding up the process of downloading new emails from the server.

Redis has supported pipelining since the very early days, so whatever version you are running, you can use pipelining with Redis. This is an example using the raw netcat utility:

$ (printf "PING\r\nPING\r\nPING\r\n"; sleep 1) | nc localhost 6379
+PONG
+PONG
+PONG

This time we are not paying the cost of RTT for every call, but just one time for the three commands.

To be very explicit, with pipelining the order of operations of our very first example will be the following:

  • Client: INCR X
  • Client: INCR X
  • Client: INCR X
  • Client: INCR X
  • Server: 1
  • Server: 2
  • Server: 3
  • Server: 4

IMPORTANT NOTE: While the client sends commands using pipelining, the server will be forced to queue the replies, using memory. So if you need to send a lot of commands with pipelining, it is better to send them as batches having a reasonable number, for instance 10k commands, read the replies, and then send another 10k commands again, and so forth. The speed will be nearly the same, but the additional memory used will be at max the amount needed to queue the replies for these 10k commands.

*It's not just a matter of RTT

Pipelining is not just a way in order to reduce the latency cost due to the round trip time, it actually improves by a huge amount the total operations you can perform per second in a given Redis server. This is the result of the fact that, without using pipelining, serving each command is very cheap from the point of view of accessing the data structures and producing the reply, but it is very costly from the point of view of doing the socket I/O. This involves calling the read() and write() syscall, that means going from user land to kernel land. The context switch is a huge speed penalty.

When pipelining is used, many commands are usually read with a single read() system call, and multiple replies are delivered with a single write() system call. Because of this, the number of total queries performed per second initially increases almost linearly with longer pipelines, and eventually reaches 10 times the baseline obtained not using pipelining, as you can see from the following graph:

Pipeline size and IOPs

*Some real world code example

In the following benchmark we'll use the Redis Ruby client, supporting pipelining, to test the speed improvement due to pipelining:

require 'rubygems'
require 'redis'

def bench(descr)
    start = Time.now
    yield
    puts "#{descr} #{Time.now-start} seconds"
end

def without_pipelining
    r = Redis.new
    10000.times {
        r.ping
    }
end

def with_pipelining
    r = Redis.new
    r.pipelined {
        10000.times {
            r.ping
        }
    }
end

bench("without pipelining") {
    without_pipelining
}
bench("with pipelining") {
    with_pipelining
}

Running the above simple script will provide the following figures in my Mac OS X system, running over the loopback interface, where pipelining will provide the smallest improvement as the RTT is already pretty low:

without pipelining 1.185238 seconds
with pipelining 0.250783 seconds

As you can see, using pipelining, we improved the transfer by a factor of five.

*Pipelining VS Scripting

Using Redis scripting (available in Redis version 2.6 or greater) a number of use cases for pipelining can be addressed more efficiently using scripts that perform a lot of the work needed at the server side. A big advantage of scripting is that it is able to both read and write data with minimal latency, making operations like read, compute, write very fast (pipelining can't help in this scenario since the client needs the reply of the read command before it can call the write command).

Sometimes the application may also want to send EVAL or EVALSHA commands in a pipeline. This is entirely possible and Redis explicitly supports it with the SCRIPT LOAD command (it guarantees that EVALSHA can be called without the risk of failing).

*Appendix: Why are busy loops slow even on the loopback interface?

Even with all the background covered in this page, you may still wonder why a Redis benchmark like the following (in pseudo code), is slow even when executed in the loopback interface, when the server and the client are running in the same physical machine:

FOR-ONE-SECOND:
    Redis.SET("foo","bar")
END

After all if both the Redis process and the benchmark are running in the same box, isn't this just messages copied via memory from one place to another without any actual latency and actual networking involved?

The reason is that processes in a system are not always running, actually it is the kernel scheduler that let the process run, so what happens is that, for instance, the benchmark is allowed to run, reads the reply from the Redis server (related to the last command executed), and writes a new command. The command is now in the loopback interface buffer, but in order to be read by the server, the kernel should schedule the server process (currently blocked in a system call) to run, and so forth. So in practical terms the loopback interface still involves network-alike latency, because of how the kernel scheduler works.

Basically a busy loop benchmark is the silliest thing that can be done when metering performances in a networked server. The wise thing is just avoiding benchmarking in this way.