27.4. Progress Reporting

27.4.1. CREATE INDEX Progress Reporting
27.4.2. VACUUM Progress Reporting
27.4.3. CLUSTER Progress Reporting

PostgreSQL has the ability to report the progress of certain commands during command execution. Currently, the only commands which support progress reporting are CREATE INDEX, VACUUM and CLUSTER. This may be expanded in the future.

27.4.1. CREATE INDEX Progress Reporting

Whenever CREATE INDEX or REINDEX is running, the pg_stat_progress_create_index view will contain one row for each backend that is currently creating indexes. The tables below describe the information that will be reported and provide information about how to interpret it.

Table 27.22. pg_stat_progress_create_index View

ColumnTypeDescription
pidintegerProcess ID of backend.
datidoidOID of the database to which this backend is connected.
datnamenameName of the database to which this backend is connected.
relidoidOID of the table on which the index is being created.
index_relidoidOID of the index being created or reindexed. During a non-concurrent CREATE INDEX, this is 0.
commandtext The command that is running: CREATE INDEX, CREATE INDEX CONCURRENTLY, REINDEX, or REINDEX CONCURRENTLY.
phasetext Current processing phase of index creation. See Table 27.23.
lockers_totalbigint Total number of lockers to wait for, when applicable.
lockers_donebigint Number of lockers already waited for.
current_locker_pidbigint Process ID of the locker currently being waited for.
blocks_totalbigint Total number of blocks to be processed in the current phase.
blocks_donebigint Number of blocks already processed in the current phase.
tuples_totalbigint Total number of tuples to be processed in the current phase.
tuples_donebigint Number of tuples already processed in the current phase.
partitions_totalbigint When creating an index on a partitioned table, this column is set to the total number of partitions on which the index is to be created.
partitions_donebigint When creating an index on a partitioned table, this column is set to the number of partitions on which the index has been completed.

Table 27.23. CREATE INDEX Phases

PhaseDescription
initializing CREATE INDEX or REINDEX is preparing to create the index. This phase is expected to be very brief.
waiting for writers before build CREATE INDEX CONCURRENTLY or REINDEX CONCURRENTLY is waiting for transactions with write locks that can potentially see the table to finish. This phase is skipped when not in concurrent mode. Columns lockers_total, lockers_done and current_locker_pid contain the progress information for this phase.
building index The index is being built by the access method-specific code. In this phase, access methods that support progress reporting fill in their own progress data, and the subphase is indicated in this column. Typically, blocks_total and blocks_done will contain progress data, as well as potentially tuples_total and tuples_done.
waiting for writers before validation CREATE INDEX CONCURRENTLY or REINDEX CONCURRENTLY is waiting for transactions with write locks that can potentially write into the table to finish. This phase is skipped when not in concurrent mode. Columns lockers_total, lockers_done and current_locker_pid contain the progress information for this phase.
index validation: scanning index CREATE INDEX CONCURRENTLY is scanning the index searching for tuples that need to be validated. This phase is skipped when not in concurrent mode. Columns blocks_total (set to the total size of the index) and blocks_done contain the progress information for this phase.
index validation: sorting tuples CREATE INDEX CONCURRENTLY is sorting the output of the index scanning phase.
index validation: scanning table CREATE INDEX CONCURRENTLY is scanning the table to validate the index tuples collected in the previous two phases. This phase is skipped when not in concurrent mode. Columns blocks_total (set to the total size of the table) and blocks_done contain the progress information for this phase.
waiting for old snapshots CREATE INDEX CONCURRENTLY or REINDEX CONCURRENTLY is waiting for transactions that can potentially see the table to release their snapshots. This phase is skipped when not in concurrent mode. Columns lockers_total, lockers_done and current_locker_pid contain the progress information for this phase.
waiting for readers before marking dead REINDEX CONCURRENTLY is waiting for transactions with read locks on the table to finish, before marking the old index dead. This phase is skipped when not in concurrent mode. Columns lockers_total, lockers_done and current_locker_pid contain the progress information for this phase.
waiting for readers before dropping REINDEX CONCURRENTLY is waiting for transactions with read locks on the table to finish, before dropping the old index. This phase is skipped when not in concurrent mode. Columns lockers_total, lockers_done and current_locker_pid contain the progress information for this phase.

27.4.2. VACUUM Progress Reporting

Whenever VACUUM is running, the pg_stat_progress_vacuum view will contain one row for each backend (including autovacuum worker processes) that is currently vacuuming. The tables below describe the information that will be reported and provide information about how to interpret it. Progress for VACUUM FULL commands is reported via pg_stat_progress_cluster because both VACUUM FULL and CLUSTER rewrite the table, while regular VACUUM only modifies it in place. See Section 27.4.3.

Table 27.24. pg_stat_progress_vacuum View

ColumnTypeDescription
pidintegerProcess ID of backend.
datidoidOID of the database to which this backend is connected.
datnamenameName of the database to which this backend is connected.
relidoidOID of the table being vacuumed.
phasetext Current processing phase of vacuum. See Table 27.25.
heap_blks_totalbigint Total number of heap blocks in the table. This number is reported as of the beginning of the scan; blocks added later will not be (and need not be) visited by this VACUUM.
heap_blks_scannedbigint Number of heap blocks scanned. Because the visibility map is used to optimize scans, some blocks will be skipped without inspection; skipped blocks are included in this total, so that this number will eventually become equal to heap_blks_total when the vacuum is complete. This counter only advances when the phase is scanning heap.
heap_blks_vacuumedbigint Number of heap blocks vacuumed. Unless the table has no indexes, this counter only advances when the phase is vacuuming heap. Blocks that contain no dead tuples are skipped, so the counter may sometimes skip forward in large increments.
index_vacuum_countbigint Number of completed index vacuum cycles.
max_dead_tuplesbigint Number of dead tuples that we can store before needing to perform an index vacuum cycle, based on maintenance_work_mem.
num_dead_tuplesbigint Number of dead tuples collected since the last index vacuum cycle.

Table 27.25. VACUUM Phases

PhaseDescription
initializing VACUUM is preparing to begin scanning the heap. This phase is expected to be very brief.
scanning heap VACUUM is currently scanning the heap. It will prune and defragment each page if required, and possibly perform freezing activity. The heap_blks_scanned column can be used to monitor the progress of the scan.
vacuuming indexes VACUUM is currently vacuuming the indexes. If a table has any indexes, this will happen at least once per vacuum, after the heap has been completely scanned. It may happen multiple times per vacuum if maintenance_work_mem is insufficient to store the number of dead tuples found.
vacuuming heap VACUUM is currently vacuuming the heap. Vacuuming the heap is distinct from scanning the heap, and occurs after each instance of vacuuming indexes. If heap_blks_scanned is less than heap_blks_total, the system will return to scanning the heap after this phase is completed; otherwise, it will begin cleaning up indexes after this phase is completed.
cleaning up indexes VACUUM is currently cleaning up indexes. This occurs after the heap has been completely scanned and all vacuuming of the indexes and the heap has been completed.
truncating heap VACUUM is currently truncating the heap so as to return empty pages at the end of the relation to the operating system. This occurs after cleaning up indexes.
performing final cleanup VACUUM is performing final cleanup. During this phase, VACUUM will vacuum the free space map, update statistics in pg_class, and report statistics to the statistics collector. When this phase is completed, VACUUM will end.

27.4.3. CLUSTER Progress Reporting

Whenever CLUSTER or VACUUM FULL is running, the pg_stat_progress_cluster view will contain a row for each backend that is currently running either command. The tables below describe the information that will be reported and provide information about how to interpret it.

Table 27.26. pg_stat_progress_cluster View

ColumnTypeDescription
pidintegerProcess ID of backend.
datidoidOID of the database to which this backend is connected.
datnamenameName of the database to which this backend is connected.
relidoidOID of the table being clustered.
commandtext The command that is running. Either CLUSTER or VACUUM FULL.
phasetext Current processing phase. See Table 27.27.
cluster_index_relidoid If the table is being scanned using an index, this is the OID of the index being used; otherwise, it is zero.
heap_tuples_scannedbigint Number of heap tuples scanned. This counter only advances when the phase is seq scanning heap, index scanning heap or writing new heap.
heap_tuples_writtenbigint Number of heap tuples written. This counter only advances when the phase is seq scanning heap, index scanning heap or writing new heap.
heap_blks_totalbigint Total number of heap blocks in the table. This number is reported as of the beginning of seq scanning heap.
heap_blks_scannedbigint Number of heap blocks scanned. This counter only advances when the phase is seq scanning heap.
index_rebuild_countbigint Number of indexes rebuilt. This counter only advances when the phase is rebuilding index.

Table 27.27. CLUSTER and VACUUM FULL Phases

PhaseDescription
initializing The command is preparing to begin scanning the heap. This phase is expected to be very brief.
seq scanning heap The command is currently scanning the table using a sequential scan.
index scanning heap CLUSTER is currently scanning the table using an index scan.
sorting tuples CLUSTER is currently sorting tuples.
swapping relation files The command is currently swapping newly-built files into place.
rebuilding index The command is currently rebuilding an index.
performing final cleanup The command is performing final cleanup. When this phase is completed, CLUSTER or VACUUM FULL will end.