Skip Headers
Oracle® Database Vault Administrator's Guide
11g Release 2 (11.2)

Part Number E23090-05
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Index
Index
Go to Master Index
Master Index
Go to Feedback page
Contact Us

Go to previous page
Previous
Go to next page
Next
PDF · Mobi · ePub

10 DBA Operations in an Oracle Database Vault Environment

This chapter contains:

Using Oracle Database Vault with Oracle Enterprise Manager

This section contains:

Setting the Database Vault Administrator URL in Oracle Enterprise Manager

You can configure Database Control or Grid Control to use a specific Database Vault Administrator URL.

  1. Access Oracle Database Vault Home page from Oracle Enterprise Manager.

    See "Accessing the Oracle Database Vault Pages from Oracle Enterprise Manager".

    If you want to save the Database Vault URL:

    • For Database Control: Ensure that in addition to being granted the DV_OWNER or DV_ADMIN role, that you are also an Enterprise Manager administrator.

    • For Grid Control: Ensure that you have been granted the OPERATOR privilege on the target database.

  2. Access the Database Vault Administrator URL page.

    From the Database Vault Home page, click the Administration tab, and then under Policy Administration, click the Launch Database Vault Administrator link.

    The Database Vault Administrator URL page appears.

  3. In the Database Vault Administrator URL field, enter the Database Vault Administrator URL that you want to use.

    For example:

    https://myserver.us.example.com:1148/dva
    
  4. To test the URL, click the Launch to test URL button.

  5. Click the Save button.

Propagating Oracle Database Vault Policies to Other Databases

If you have Oracle Database Vault installed in an Oracle Enterprise Manager Grid Control Release 10.2.0.5 environment, then you can propagate Database Vault policies to other Database Vault-protected databases. Note that you cannot use Grid Control to create Database Vault policies or perform the actions normally provided for in Database Vault Administrator. If you want to perform these functions, then use Database Vault Administrator.

To propagate Database Vault policies to other databases:

  1. Access Oracle Database Vault Administrator from Oracle Enterprise Manager, and log in to Database Vault as a user who has been granted the DV_OWNER or DV_ADMIN role.

    Ensure that you select the database that contains the policies that you want to propagate.

    See "Accessing the Oracle Database Vault Pages from Oracle Enterprise Manager".

  2. From the Database Vault home page, select the Administration subpage.

  3. In the Administration page, under Policy Propagation, select the Database Vault Policy Propagation link.

    The Available Policies area in the Policy Propagation subpage lists a summary of the Oracle Database Vault policies that were created for the database that you selected in Step 1. From here, you can propagate these policies to another database.

  4. Under Available Policies, select each policy that you want to propagate to another database.

    By default, all policies are selected.

    Description of dv_oem.gif follows
    Description of the illustration dv_oem.gif

  5. Under Destination Databases, click the Add button.

    Description of dv_oem2.gif follows
    Description of the illustration dv_oem2.gif

  6. Under Search and Select: Database Vault Enabled Destination Databases, search for the destination databases, and then select each database to which you want to propagate the policies. Then click the Select button.

  7. Under Destination Databases, do the following:

    1. Under Apply credentials across destination database(s), enter the user name and password of the administrator of the Database Vault database that contains the policies you want to propagate.

      This feature applies the Database Vault administrator's user name and password to all of the selected destination databases.

    2. Select each database to which you want to propagate the policies.

    3. Enter the Database Vault administrator user name and password for each database.

    4. Click the Apply button.

  8. In the Propagate Options page, select from the following options.

    Any changes made to the seeded realms, command rules, rule sets, and so on will not be propagated to the destination databases. Only custom-created data are propagated.

    • Restore on failure: If the policy propagation encounters errors, then the propagation is rolled back. That is, the original policies on the destination database are restored. If you do not select this option, then the policy propagation on the destination database continues and ignores any errors.

    • Skip propagation if user defined policies exist: If the destination databases already have the user-defined policies, then the policy propagation is not attempted. If you do not select this option, then regardless of whether user-defined policies exist on the destination database, all the existing policies are cleared, and the policies from the source database are applied to the destination database.

    • Propagate Enterprise Manager metric thresholds for database vault metrics: If the source database has Oracle Database Vault metric thresholds set, then these thresholds are also propagated to the destination databases. If you do not select this option, then only policies are propagated and not the Oracle Database Vault thresholds.

  9. Click the OK button.

  10. In the Confirmation window, click OK.

    A message indicating success or failure appears. If the propagation succeeds, then the policies are active right away in their destination databases.

Using Enterprise Manager Grid Control Alerts for Oracle Database Vault Policies

Grid Control generates Oracle Database Vault-specific alerts. To view these alerts, you must be granted the DV_OWNER, DV_ADMIN, or DV_SECANALYST role. The alerts are as follows:

  • Database Vault Attempted Realm Violations. This alert helps the Oracle Database Vault security analyst (DV_SECANALYST role) to monitor violation attempts on the Database Vault database. This user can select the realms to be affected by the alert and filter these realms based on the different types of attempts by using error codes. You can enable this metric from the Metrics and Policy Settings page. By default, the attempted realm violations are collected every 24 hours.

  • Database Vault Attempted Command Rule Violations. The functionality for this alert is the same as for Database Vault Attempted Realm Violations, except that it focuses on violations on command rules.

  • Database Vault Realm Configuration Issues. This metric tracks and raises an alert if users misconfigure realms. This metric is enabled when you install Oracle Database vault, and by default it collects data every one hour.

  • Database Vault Command Rule Configuration Issues. This functionality for this alert is that same as Database Vault Realm Configuration Issues, except that it focuses on configuration changes to command rules.

  • Database Vault Policy Changes. This metric raises an alert on any change to any Database Vault policy, such as policies for realms and command rules. It provides a detailed policy changes report.

Using Oracle Database Vault-Specific Reports in Enterprise Manager Grid Control

From the Database Vault home page, you can find information about the following types of violations:

  • Top five attempted violations on realm and command rule

  • Top five attempted violations by database users and client host

  • Time series-based graphical reports on attempted violations for more detailed analysis

To have full access to the Database Vault reports, you must log in to Database Vault Administrator as a user who has been granted the DV_OWNER, DV_ADMIN, or DV_SECANALYST role.

Changing the DBSNMP Account Password in an Oracle Database Vault Environment

Before you can change the password for the DBSNMP user account, you must revoke the DV_MONITOR role from this account. In an Oracle Database Vault environment, the DBSNMP user account is granted the DV_MONITOR role. (The DBSNMP user can change his or her own password directly, without having to have the DV_MONITOR role revoked first.)

To change the DBSNMP user password:

  1. Log in to SQL*Plus using an account that has been granted the DV_OWNER role.

  2. Revoke the DV_MONITOR role from the DBSNMP user account.

  3. Connect as a user who has been granted the DV_ACCTMGR role and then change the DBSNMP user account password.

  4. Connect as the DV_OWNER user and then grant the DV_MONITOR role back to the DBSNMP user account.

Alternatively, you can temporarily disable Oracle Database Vault, log on as a user who has been granted the ALTER USER privilege, and then modify the DBSNMP password. Afterward, re-enable Database Vault. See Appendix B, "Disabling and Enabling Oracle Database Vault," for more information.

Using Oracle Data Pump in an Oracle Database Vault Environment

This section contains:

About Using Oracle Data Pump in an Oracle Database Vault Environment

Database administrators who want to use Oracle Data Pump must have Oracle Database Vault-specific authorization, in addition to the standard Oracle Data Pump privileges, if they want to export and import data in an Oracle Database Vault environment. (Note that you cannot use the legacy EXP and IMP utilities if Oracle Database Vault is enabled.)

The level of authorization that you must grant depends on the following scenarios:

  • A database administrator wants to export or import data in a schema that has no realm protection. In this case, this user only needs the standard Oracle Data Pump privileges, not the Oracle Database Vault authorization.

  • A database administrator wants to export or import data in a protected schema. You must grant this user Database Vault-specific authorization by using the DVSYS.DBMS_MACADM.AUTHORIZE_DATAPUMP_USER procedure. This authorization applies to both the EXPDP and IMPDP utilities. Later on, you can revoke this authorization by using the DVSYS.DBMS_MACADM.UNAUTHORIZE_DATAPUMP_USER procedure.

  • A database administrator wants to export or import the contents of an entire database. In addition to the authorization granted by the DVSYS.DBMS_MACADM.AUTHORIZE_DATAPUMP_USER procedure, you must grant this user the DV_OWNER role.

Granting a Database Administrator Authorization to Use Oracle Data Pump

To authorize a database administrator to use Data Pump in an Oracle Database Vault environment:

  1. Log in to SQL*Plus as a user who has been granted the DV_OWNER or DV_ADMIN role.

  2. Ensure that the user to whom you want to grant authorization has been granted the EXP_FULL_DATABASE and IMP_FULL_DATABASE roles, which are required for using Oracle Data Pump.

    SELECT GRANTEE, GRANTED_ROLE FROM DBA_ROLE_PRIVS 
     WHERE GRANTED_ROLE LIKE '%FULL%';
    
  3. Grant this user Oracle Database Vault authorization.

    For example, to authorize the Data Pump user dp_mgr to export and import objects for an entire database:

    EXEC DVSYS.DBMS_MACADM.AUTHORIZE_DATAPUMP_USER('dp_mgr');
    

    Optionally, you can restrict dp_mgr's activities to a specific schema or even a table, as shown in the following examples:

    EXEC DVSYS.DBMS_MACADM.AUTHORIZE_DATAPUMP_USER('DP_MGR', 'HR');
    
    EXEC DVSYS.DBMS_MACADM.AUTHORIZE_DATAPUMP_USER('DP_MGR', 'HR', 'EMPLOYEES');
    

    See "AUTHORIZE_DATAPUMP_USER Procedure" for detailed information about this procedure.

    After you run the DVSYS.DBMS_MACADM.AUTHORIZE_DATAPUMP_USER procedure, the authorization is stored as a rule in the Allow Oracle Data Pump Operation rule set, described in "Default Rule Sets". You can refer to this rule set by querying the DVSYS.DBA_DV_RULE_SET view if you want to check the user's authorizations.

  4. If the objects that this user wants to import are associated with other objects that are protected by a realm, then authorize the user to have access to that realm.

    For example, suppose user dp_mgr wants to export the SCOTT schema. However, the SCOTT schema is associated with the SYSMAN.AQ$_MGMT_NOTIFY_QTABLE_S table, and the SYSMAN schema is protected by a realm. So, before user dp_mgr can export the SCOTT schema, he must be authorized as follows:

    First, ensure that this user is a realm participant. For example:

    BEGIN
     DVSYS.DBMS_MACADM.ADD_AUTH_TO_REALM(
      realm_name   => 'SYSMAN Realm', 
      grantee      => 'DP_MGR', 
      auth_options => DBMS_MACUTL.G_REALM_AUTH_PARTICIPANT);
    END;
    /
    

    Next, run the following procedure to authorize the user for Oracle Data Pump operations:

    EXEC DVSYS.DBMS_MACADM.AUTHORIZE_DATAPUMP_USER('DP_MGR','SYSMAN'); 
    
  5. If the user must export the entire database, then grant the user the DV_OWNER role.

    GRANT DV_OWNER TO dp_mgr;
    
  6. Ensure that the Allow Oracle Data Pump Operation rule set has been enabled by querying the DVSYS.DBA_DV_RULE_SET data dictionary view as follows:

    SELECT ENABLED FROM DVSYS.DBA_DV_RULE_SET 
     WHERE RULE_SET_NAME = 'Allow Oracle Data Pump Operation'; 
    

Guidelines for Exporting or Importing Data in an Oracle Database Vault Environment

After you have granted the database administrator who is using Data Pump the necessary authorization, this user is ready to perform any export or import operations that are necessary. Before this user begins work, he or she should follow these guidelines:

  • Create a full backup of the database datafiles. This way, if you or other users do not like the newly-imported data, you easily can revert the database to its previous state. This guideline is especially useful if an intruder had managed to modify Data Pump exported data to use his or her own policies.

  • Decide how to handle exporting and importing multiple schemas or tables. You cannot specify multiple schemas or tables in the DVSYS.DBMS_MACADM.AUTHORIZE_DATAPUMP_USER procedure, but you can use either of the following methods to accomplish this task:

    • Run individual DVSYS.DBMS_MACADM.AUTHORIZE_DATAPUMP_USER procedures for each schema or table, and then specify the list of these objects in the SCHEMAS or TABLES parameter of the expdp and impdp utilities.

    • Perform a full database export or import operation. If so, see the next guideline.

  • When performing an export or import operation for an entire database, set the expdp or impdp FULL option to Y. Remember that this setting will capture the DVSYS schema, so ensure that the user has been granted the DV_OWNER role. For detailed information about Oracle Data Pump, see Oracle Database Utilities.

Revoking Authorization from Databases Administrators Who Are Using Data Pump

To revoke authorization from the database administrator who is using Data Pump:

  1. If you granted the user the DV_OWNER role, optionally revoke this role.

    REVOKE DV_OWNER FROM dp_mgr;
    
  2. Query the DVSYS.DBA_DV_RULE_SET data dictionary view and then make a note of the user's authorizations that have been defined in the Allow Oracle Data Pump Operation rule set.

    SELECT RULE_EXPR FROM DVSYS.DBA_DV_RULE_SET_RULE
     WHERE RULE_SET_NAME = 'Allow Oracle Data Pump Operation';
    

    For example, if you had authorized user dp_mgr to perform export and import operations on the entire database, a rule defining this authorization appears in the list of rule expressions in the Allow Oracle Data Pump Operation rule set.

  3. Use the information you gathered from Step 2 to build the DVSYS.DBMS_MACADM.UNAUTHORIZE_DATAPUMP_USER command.

    For example:

    EXEC DVSYS.DBMS_MACADM.UNAUTHORIZE_DATAPUMP_USER('DP_MGR');
    

    Ensure that this unauthorization complements the original authorization action. In other words, if you originally gave dp_mgr authorization over the entire database, then the following commands will not work:

    EXEC DVSYS.DBMS_MACADM.UNAUTHORIZE_DATAPUMP_USER('DP_MGR', 'HR');
    
    EXEC DVSYS.DBMS_MACADM.UNAUTHORIZE_DATAPUMP_USER('DP_MGR', 'HR', 'EMPLOYEES');
    

    See "UNAUTHORIZE_DATAPUMP_USER Procedure" for more information.

  4. If you needed to make the user a realm participant (for example, to access the SYSMAN.AQ$_MGMT_NOTIFY_QTABLE_S table objects, as described in Step 4 under "Granting a Database Administrator Authorization to Use Oracle Data Pump"), then remove the realm authorization for this user.

    For example:

    BEGIN
     DVSYS.DBMS_MACADM.DELETE_AUTH_FROM_REALM(
      realm_name => 'SYSMAN Realm',
      grantee    => 'DP_MGR');
    END;
    /
    

Scheduling Database Jobs in an Oracle Database Vault Environment

This section contains:

About Scheduling Database Jobs in an Oracle Database Vault Environment

Users who are responsible for scheduling database jobs must have Oracle Database Vault-specific administration, in addition to the standard system privileges required for scheduling database jobs.

The level of authorization that you must grant depends on the following scenarios:

  • An administrator wants to schedule a job in his or her own schema. An administrator who has been granted privileges to schedule database jobs can continue to do so without any Oracle Database Vault-specific authorizations, unless this schema is protected by a realm. In that case, ensure that this user is authorized to access the realm. See "Defining Realm Authorization" for instructions on granting a user realm authorization.

  • An administrator wants to run a job in another schema, but this job does not access any Oracle Database Vault realm or command rule protected object. In this case, this user only needs job related system privileges, not the Oracle Database Vault privileges.

  • An administrator wants to run a job under the schema of another user, including any schema in the database or a remote database. If this job accesses an Oracle Database Vault realm or command rule protected object, then you must grant this user Database Vault-specific authorization by using the DVSYS.DBMS_MACADM.AUTHORIZE_SCHEDULER_USER procedure. This authorization applies to both background and foreground jobs. For background jobs, the authorization applies to the last user who created or modified the job. In addition, ensure that the schema owner (the protected schema in which the job is created) authorized to the realm.

    Later on, you can revoke this authorization by using the DVSYS.DBMS_MACADM.UNAUTHORIZE_SCHEDULER_USER procedure. If the schema is not protected by a realm, then you do not need to run the DVSYS.DBMS_MACADM.AUTHORIZE_SCHEDULER_USER procedure for the user.

Granting a Job Scheduling Administrator Authorization for Oracle Database Vault

To authorize a user to schedule database jobs:

  1. Log in to SQL*Plus as a user who has been granted the DV_OWNER or DV_ADMIN role.

    Only a user who has been granted either of these roles can grant the necessary authorization.

  2. Ensure that the user to whom you want to grant authorization has been granted system privileges to schedule database jobs.

    These privileges include any of the following: CREATE JOB, CREATE ANY JOB, CREATE EXTERNAL JOB, EXECUTE ANY PROGRAM, EXECUTE ANY CLASS, MANAGE SCHEDULER. The DBA and SCHEDULER_ADMIN roles provide these privileges; however, when Oracle Database Vault is enabled, the privileges are revoked from these roles.

    For example:

    SELECT GRANTEE, PRIVILEGE FROM DBA_SYS_PRIVS 
     WHERE PRIVILEGE IN ('CREATE JOB', 'CREATE ANY JOB');
    
  3. Grant this user Oracle Database Vault authorization.

    For example, to authorize the user job_mgr to schedule jobs for any schema in the database:

    EXEC DVSYS.DBMS_MACADM.AUTHORIZE_SCHEDULER_USER('JOB_MGR');
    

    Optionally, you can restrict job_mgr's activities to a specific schema, as follows:

    EXEC DVSYS.DBMS_MACADM.AUTHORIZE_SCHEDULER_USER('JOB_MGR', 'HR');
    

    See "AUTHORIZE_SCHEDULER_USER Procedure" for detailed information about this procedure.

    After you run the DVSYS.DBMS_MACADM.AUTHORIZE_SCHEDULER_USER procedure, the authorization is stored as a rule in the Allow Scheduler Job rule set, described in "Default Rule Sets". You can refer to this rule set by querying the DVSYS.DBA_DV_RULE_SET view if you want to check the user's authorizations.

  4. Ensure that the user has been authorized by querying the DVSYS.DBA_DV_JOB_AUTH data dictionary view as follows:

    SELECT GRANTEE,OBJECT_OWNER FROM DVSYS.DBA_DV_JOB_AUTH 
    WHERE GRANTEE = 'user_name';
    

Revoking Authorization from Job Scheduling Administrators

To revoke authorization from a user for scheduling database jobs.

  1. Query the DVSYS.DBA_DV_JOB_AUTH data dictionary view and then make a note of the user's authorizations that have been defined in the Allow Scheduler Job rule set.

    SELECT GRANTEE FROM DVSYS.DBA_DV_JOB_AUTH;
    

    For example, if you had authorized user job_mgr to perform schedule database jobs for the entire database, a rule defining this authorization appears in the list of rule expressions in the Allow Scheduler Job rule set.

  2. Use the information you gathered from Step 1 to build the DVSYS.DBMS_MACADM.UNAUTHORIZE_SCHEDULER_USER command.

    For example:

    EXEC DVSYS.DBMS_MACADM.UNAUTHORIZE_SCHEDULER_USER('JOB_MGR');
    

    Ensure that this unauthorization complements the original authorization action. In other words, if you originally gave job_mgr authorization over the entire database, then the following command will not work:

    EXEC DVSYS.DBMS_MACADM.UNAUTHORIZE_SCHEDULER_USER('JOB_MGR', 'HR');
    

    See "UNAUTHORIZE_SCHEDULER_USER Procedure" for more information.

Using Oracle Database Vault with Oracle Recovery Manager

You can use Recovery Manager (RMAN) in an Oracle Database Vault environment. The functionality of RMAN with Oracle Database Vault is the same as its functionality in a standard Oracle Database environment.

For more information about RMAN, see the following documentation:

Using Oracle Streams in an Oracle Database Vault Environment

If you want to use Oracle Streams in an Oracle Database Vault environment, then you must have the following privileges:

Using XStream in an Oracle Database Vault Environment

If you want to use XStream in an Oracle Database Vault environment, then you must have the following privileges:

Using Oracle GoldenGate in an Oracle Database Vault Environment

If you want to use Oracle GoldenGate in an Oracle Database Vault environment, then you must have the following privileges:

Using Data Masking in an Oracle Database Vault Environment

This section contains:

About Data Masking in an Oracle Database Vault Enabled Database

In an Oracle Database Vault-enabled database, only users who have Database Vault authorizations can mask data in Database Vault-protected database objects. In a non-Database Vault environment, users who have been granted the SELECT_CATALOG_ROLE and DBA roles can perform data masking. However, with Database Vault, users must have additional privileges. This section describes three ways that you can use to enable users to mask data in Database Vault-protected objects.

If users do not have the correct privileges, then the following errors can occur while creating the masking definition or when the job is executing:

ORA-47400: Command Rule violation for string on string 

ORA-47401: Realm violation for string on string. 

ORA-47408: Realm violation for the EXECUTE command 

ORA-47409: Command Rule violation for the EXECUTE command 

ORA-01301: insufficient privileges

Adding Data Masking Users to the Data Dictionary Realm Authorizations

The Oracle Data Dictionary controls access to the Oracle Database catalog schemas, such as SYS and SYSTEM. (See "Default Realms" for a full list of these schemas.) It also controls the ability to grant system privileges and database administrator roles. If you add users to the Data Dictionary realm, and assuming these users already have the privileges associated with the Oracle Data Dictionary, then these users will have these same privileges in a Database Vault environment. Therefore, if you do add a user to this realm, ensure that this user is a trusted user.

For example:

BEGIN
 DVSYS.DBMS_MACADM.ADD_AUTH_TO_REALM(
  realm_name   => 'Data Dictionary Realm', 
  grantee      => 'DBA_JSMITH', 
  auth_options => DBMS_MACUTL.G_REALM_AUTH_PARTICIPANT);
END;
/

Giving Users Access to Tables or Schemas That They Want to Mask

If the table or schema of a table that is to be data masked is in a realm, then you must add the user responsible for data masking to the realm authorization as a participant or owner. If the table or schema has dependent objects that are in other realm-protected tables, then you must grant the user participant or owner authorization for those realms as well.

The following example shows how to grant user DBA_JSMITH authorization for the HR.EMPLOYEES table, which is protected by a realm called Business Apps Realm:

BEGIN
 DVSYS.DBMS_MACADM.ADD_AUTH_TO_REALM(
  realm_name   => 'Business Apps Realm', 
  grantee      => 'DBA_JSMITH', 
  auth_options => DBMS_MACUTL.G_REALM_AUTH_PARTICIPANT;
END;
/

Creating a Command Rule to Enable Data Masking Privileges

For data masking, users must have the CREATE TABLE, SELECT TABLE, ALTER TABLE, and DROP TABLE privileges for the masking objects and if there are any dependent objects to be created, the user must have the appropriate privileges such as CREATE PACKAGE, CREATE TRIGGER, and so on.

You can create command rules to control data masking privileges at a granular level. To do so, create a command rule that can either prevent or allow the user access to objects that must have to be data masked. For example, you can create a command rule called Allow Data Masking that checks if the user is in a list of users who are responsible for data masking. If the user logging in is one of these users, then the command rule evaluates to true and the user is permitted to create the data mask for the protected object.

To create this type of command rule:

  1. Create the rule set rule.

    For example:

    BEGIN
     DVSYS.DBMS_MACADM.CREATE_RULE(
      rule_name  => 'Is HDRISCOLL or DBA_JSMITH User', 
      rule_expr  =>'USER IN(''HDRISCOLL'',''DBA_JSMITH'')';
    END;
    /
    
  2. Create a rule set and then add the rule to it:

    BEGIN
     DVSYS.DBMS_MACADM.CREATE_RULE_SET(
      rule_set_name    => 'Allow Data Masking', 
      description      => 'Allows users HDRISCOLL and DBA_JSMITH access', 
      enabled          => 'Y',
      eval_options     => 1,
      audit_options    => 1,
      fail_options     => 1,
      fail_message     => 'You do not have access to this object.',
      fail_code        => 20461,
      handler_options  => 0, 
      is_static        => TRUE);
    END;
    /
    BEGIN
     DVSYS.DBMS_MACADM.ADD_RULE_TO_RULE_SET(
      rule_set_name => 'Allow Data Masking', 
      rule_name     => 'Is HDRISCOLL or DBA_JSMITH User'),
      rule_order    => 1);
    END;
    /
    
  3. Create a command rule and then add this rule to it:

    BEGIN
     DVSYS.DBMS_MACADM.CREATE_COMMAND_RULE(
      command         => 'CREATE TABLE', 
      rule_set_name   => 'Allow Data Masking', 
      object_owner    => 'HR', 
      object_name     => 'EMPLOYEES', 
      enabled         => DBMS_MACUTL.G_YES);
    END; 
    /