mod_perl logo perl icon
previous page: Apache2::ServerRec - Perl API for Apache server record accessorspage up: mod_perl 2.0 APInext page: Apache2::SubProcess -- Executing SubProcesses under mod_perl

Apache2::ServerUtil - Perl API for Apache server record utils






Embedding Perl in HTML with Mason

Embedding Perl in HTML with Mason

By Dave Rolsky, Ken Williams
mod_perl2 User's Guide

mod_perl2 User's Guide

By Stas Bekman, Jim Brandt
Practical mod_perl

Practical mod_perl

By Stas Bekman, Eric Cholet
The mod_perl Developer's Cookbook

The mod_perl Developer's Cookbook

By Geoffrey Young, Paul Lindner, Randy Kobes
mod_perl Pocket Reference

mod_perl Pocket Reference

By Andrew Ford
Writing Apache Modules with Perl and C

Writing Apache Modules with Perl and C

By Lincoln Stein, Doug MacEachern


Table of Contents

Synopsis

  use Apache2::ServerUtil ();
  $s = Apache2::ServerUtil->server;
  
  # push config
  $s->add_config(['ServerTokens off']);
  
  # add components to the Server signature
  $s->add_version_component("MyModule/1.234");
  
  # access PerlSetVar/PerlAddVar values
  my $srv_cfg = $s->dir_config;
  
  # check command line defines
  print "this is mp2"
      if Apache2::ServerUtil::exists_config_define('MODPERL2');
  
  # get PerlChildExitHandler configured handlers
  @handlers = @{ $s->get_handlers('PerlChildExitHandler') || []};
  
  # server build and version info:
  $when_built = Apache2::ServerUtil::get_server_built(); 
  $description = Apache2::ServerUtil::get_server_description(); 
  $version = Apache2::ServerUtil::get_server_version();
  $banner = Apache2::ServerUtil::get_server_banner(); 
  
  # ServerRoot value
  $server_root = Apache2::ServerUtil::server_root();
  
  # get 'conf/' dir path (avoid using this function!)
  my $dir = Apache2::ServerUtil::server_root_relative($r->pool, 'conf');
  
  # set child_exit handlers
  $r->set_handlers(PerlChildExitHandler => \&handler);
  
  # server level PerlOptions flags lookup
  $s->push_handlers(ChildExit => \&child_exit)
      if $s->is_perl_option_enabled('ChildExit');
  
  # extend HTTP to support a new method
  $s->method_register('NEWGET');
  
  # register server shutdown callback
  Apache2::ServerUtil::server_shutdown_register_cleanup(sub { Apache2::Const::OK });
  
  # do something only when the server restarts
  my $cnt = Apache2::ServerUtil::restart_count();
  do_something_once() if $cnt > 1;
  
  # get the resolved ids from Group and User entries
  my $user_id  = Apache2::ServerUtil->user_id;
  my $group_id = Apache2::ServerUtil->group_id;


TOP

Description

Apache2::ServerUtil provides the Apache server object utilities API.



TOP

Methods API

Apache2::ServerUtil provides the following functions and/or methods:



TOP

add_config

Dynamically add Apache configuration:

  $s->add_config($lines);

See also: $r->add_config

For example:

Add a configuration section at the server startup (e.g. from startup.pl):

  use Apache2::ServerUtil ();
  my $conf = <<'EOC';
  PerlModule Apache2::MyExample
  <Location /perl>
    SetHandler perl-script
    PerlResponseHandler Apache2::MyExample
  </Location>
  EOC
  Apache2::ServerUtil->server->add_config([split /\n/, $conf]);


TOP

add_version_component

Add a component to the version string

  $s->add_version_component($component);

This function is usually used by modules to advertise themselves to the world. It's picked up by such statistics collectors, like netcraft.com, which accomplish that by connecting to various servers and grabbing the server version response header (Server). Some servers choose to fully or partially conceal that header.

This method should be invoked in the PerlPostConfigHandler phase, which will ensure that the Apache core version number will appear first.

For example let's add a component "Hikers, Inc/0.99999" to the server string at the server startup:

  use Apache2::ServerUtil ();
  use Apache2::Const -compile => 'OK';
  
  Apache2::ServerUtil->server->push_handlers(
      PerlPostConfigHandler => \&add_my_version);
  
  sub add_my_version {
      my ($conf_pool, $log_pool, $temp_pool, $s) = @_;
      $s->add_version_component("Hikers, Inc/0.99999");
      return Apache2::Const::OK;
  }

or of course you could register the PerlPostConfigHandler handler directly in httpd.conf

Now when the server starts, you will something like:

  [Thu Jul 15 12:15:28 2004] [notice] Apache/2.0.51-dev (Unix)
  mod_perl/1.99_15-dev Perl/v5.8.5 Hikers, Inc/0.99999
  configured -- resuming normal operations

Also remember that the ServerTokens directive value controls whether the component information is displayed or not.



TOP

dir_config

$s->dir_config() provides an interface for the per-server variables specified by the PerlSetVar and PerlAddVar directives, and also can be manipulated via the APR::Table methods.

  $table  = $s->dir_config();
  $value  = $s->dir_config($key);
  @values = $s->dir_config->get($key);
  $s->dir_config($key, $val);

The keys are case-insensitive.

  $t = $s->dir_config();

dir_config() called in a scalar context without the $key argument returns a HASH reference blessed into the APR::Table class. This object can be manipulated via the APR::Table methods. For available methods see APR::Table.

  @values = $s->dir_config->get($key);

To receive a list of values you must use get() method from the APR::Table class.

  $value = $s->dir_config($key);

If the $key argument is passed in the scalar context only a single value will be returned. Since the table preserves the insertion order, if there is more than one value for the same key, the oldest value assosiated with the desired key is returned. Calling in the scalar context is also much faster, as it'll stop searching the table as soon as the first match happens.

  $s->dir_config($key => $val);

If the $key and the $val arguments are used, the set() operation will happen: all existing values associated with the key $key (and the key itself) will be deleted and $value will be placed instead.

  $s->dir_config($key => undef);

If $val is undef the unset() operation will happen: all existing values associated with the key $key (and the key itself) will be deleted.



TOP

exists_config_define

Check for a definition from the server startup command line (e.g. -DMODPERL2)

  $result = Apache2::ServerUtil::exists_config_define($name);

For example:

  print "this is mp2"
      if Apache2::ServerUtil::exists_config_define('MODPERL2');


TOP

get_handlers

Returns a reference to a list of handlers enabled for a given phase.

  $handlers_list = $s->get_handlers($hook_name);

See also: $r->add_config

For example:

A list of handlers configured to run at the child_exit phase:

  @handlers = @{ $s->get_handlers('PerlChildExitHandler') || []};


TOP

get_server_built

Get the date and time that the server was built

  $when_built = Apache2::ServerUtil::get_server_built();


TOP

get_server_version

Get the server version string

  $version = Apache2::ServerUtil::get_server_version();


TOP

get_server_banner

Get the server banner

 $banner = Apache2::ServerUtil::get_server_banner();


TOP

get_server_description

Get the server description

 $description = Apache2::ServerUtil::get_server_description();


TOP

group_id

Get the group id corresponding to the Group directive in httpd.conf:

  $gid = Apache2::ServerUtil->group_id;


TOP

is_perl_option_enabled

check whether a server level PerlOptions flag is enabled or not.

  $result = $s->is_perl_option_enabled($flag);

For example to check whether the ChildExit hook is enabled (which can be disabled with PerlOptions -ChildExit) and configure some handlers to run if enabled:

  $s->push_handlers(ChildExit => \&child_exit)
      if $s->is_perl_option_enabled('ChildExit');

See also: PerlOptions and the equivalent function for directory level PerlOptions flags.



TOP

method_register

Register a new request method, and return the offset that will be associated with that method.

  $offset = $s->method_register($methname);

This method allows you to extend the HTTP protocol to support new methods, which fit the HTTP paradigm. Of course you will need to write a client that understands that protocol extension. For a good example, refer to the MyApache2::SendEmail example presented in the PerlHeaderParserHandler section, which demonstrates how a new method EMAIL is registered and used.



TOP

push_handlers

Add one or more handlers to a list of handlers to be called for a given phase.

  $ok = $s->push_handlers($hook_name => \&handler);
  $ok = $s->push_handlers($hook_name => [\&handler, \&handler2]);

See also: $r->add_config

Examples:

A single handler:

  $s->push_handlers(PerlChildExitHandler => \&handler);

Multiple handlers:

  $s->push_handlers(PerlChildExitHandler => ['Foo::Bar::handler', \&handler2]);

Anonymous functions:

  $s->push_handlers(PerlLogHandler => sub { return Apache2::Const::OK });


TOP

restart_count

How many times the server was restarted.

  $restart_count = Apache2::ServerUtil::restart_count();

The following demonstration should make it clear what values to expect from this function. Let's add the following code to startup.pl, so it's run every time httpd.conf is parsed:

  use Apache2::ServerUtil ();
  my $cnt = Apache2::ServerUtil::restart_count();
  open my $fh, ">>/tmp/out" or die "$!";
  print $fh "cnt: $cnt\n";
  close $fh;

Now let's run a series of server starts and restarts and look at what is logged into /tmp/out:

  % httpd -k start
  cnt: 1
  cnt: 2
  
  % httpd -k graceful
  cnt: 1
  cnt: 3
  
  % httpd -k graceful
  cnt: 1
  cnt: 4
  
  % httpd -k stop
  cnt: 1

Remembering that Apache restarts itself immediately after starting, we can see that the restart_count goes from 1 to 2 during the server start. Moreover we can see that every operation forces the parsing of httpd.conf and therefore reinitialization of mod_perl (and running all the code found in httpd.conf). This happens even when the server is shutdown via httpd -k stop.

What conclusions can be drawn from this demonstration:

For example if you want to run something every time httpd -k is run you just need to check whether restart_count() returns 1:

  my $cnt = Apache2::ServerUtil::restart_count();
  do_something() if $cnt == 1;

To do something only when server restarts (httpd -k start or httpd -k graceful), check whether restart_count() is bigger than 1:

  my $cnt = Apache2::ServerUtil::restart_count();
  do_something() if $cnt > 1;


TOP

server

Get the main server's object

  $main_s = Apache2::ServerUtil->server();


TOP

server_root

returns the value set by the top-level ServerRoot directive.

  $server_root = Apache2::ServerUtil::server_root();


TOP

server_root_relative

Returns the canonical form of the filename made absolute to ServerRoot:

  $path = Apache2::ServerUtil::server_root_relative($pool, $fname);

$fname is appended to the value of ServerRoot and returned. For example:

  my $dir = Apache2::ServerUtil::server_root_relative($r->pool, 'logs');

You must be extra-careful when using this function. If you aren't sure what you are doing don't use it.

It's much safer to build the path by yourself using use Apache2::ServerUtil::server_root(), For example:

  use File::Spec::Functions qw(catfile);
  my $path = catfile Apache2::ServerUtil::server_root, qw(t logs);

In this example, no memory allocation happens on the Apache-side and you aren't risking to get a memory leak.

The problem with server_root_relative is that Apache allocates memory to concatenate the path string. The memory is allocated from the pool object. If you call this method on the server pool object it'll allocate the memory from it. If you do that at the server startup, it's perfectly right, since you will do that only once. However if you do that from within a request or a connection handler, you create a memory leak every time it is called -- as the memory gets allocated from the server pool, it will be freed only when the server is shutdown. Therefore if you need to build a relative to the root server path for the duration of the request, use the request pool:

  use Apache2::RequestRec ();
  Apache2::ServerUtil::server_root_relative($r->pool, $fname);

If you need to have the path for the duration of a connection (e.g. inside a protocol handler), you should use:

  use Apache2::Connection ();
  Apache2::ServerUtil::server_root_relative($c->pool, $fname);

And if you want it for the scope of the server file:

  use Apache2::Process ();
  use Apache2::ServerUtil ();
  Apache2::ServerUtil::server_root_relative($s->process->pool, $fname);

Moreover, you could have encountered the opposite problem, where you have used a short-lived pool object to construct the path, but tried to use the resulting path variable, when that pool has been destructed already. In order to avoid mysterious segmentation faults, mod_perl does a wasteful copy of the path string when returning it to you -- another reason to avoid using this function.



TOP

server_shutdown_cleanup_register

Register server shutdown cleanup callback:

  Apache2::ServerUtil::server_shutdown_cleanup_register($sub);

This function can be used to register a callback to be run once at the server shutdown (compared to PerlChildExitHandler which will execute the callback for each exiting child process).

For example in order to arrange the function do_my_cleanups() to be run every time the server shuts down (or restarts), run the following code at the server startup:

  Apache2::ServerUtil::server_shutdown_cleanup_register(\&do_my_cleanups);

It's necessary to run this code at the server startup (normally startup.pl). The function will croak if run after the PerlPostConfigHandler phase.

Values returned from cleanup functions are ignored. If a cleanup dies the exception is stringified and passed to warn(). Usually, this results in printing it to the error_log.



TOP

set_handlers

Set a list of handlers to be called for a given phase. Any previously set handlers are forgotten.

  $ok = $s->set_handlers($hook_name => \&handler);
  $ok = $s->set_handlers($hook_name => [\&handler, \&handler2]);
  $ok = $s->set_handlers($hook_name => []);
  $ok = $s->set_handlers($hook_name => undef);

See also: $r->add_config

Examples:

A single handler:

  $r->set_handlers(PerlChildExitHandler => \&handler);

Multiple handlers:

  $r->set_handlers(PerlFixupHandler => ['Foo::Bar::handler', \&handler2]);

Anonymous functions:

  $r->set_handlers(PerlLogHandler => sub { return Apache2::Const::OK });

Reset any previously set handlers:

  $r->set_handlers(PerlCleanupHandler => []);

or

  $r->set_handlers(PerlCleanupHandler => undef);


TOP

user_id

Get the user id corresponding to the User directive in httpd.conf:

  $uid = Apache2::ServerUtil->user_id;


TOP

Unsupported API

Apache2::ServerUtil also provides auto-generated Perl interface for a few other methods which aren't tested at the moment and therefore their API is a subject to change. These methods will be finalized later as a need arises. If you want to rely on any of the following methods please contact the the mod_perl development mailing list so we can help each other take the steps necessary to shift the method to an officially supported API.



TOP

error_log2stderr

Start sending STDERR to the error_log file

  $s->error_log2stderr();

This method may prove useful if you want to start redirecting STDERR to the error_log file before Apache does that on the startup.



TOP

See Also

mod_perl 2.0 documentation.



TOP

Copyright

mod_perl 2.0 and its core modules are copyrighted under The Apache Software License, Version 2.0.



TOP

Authors

The mod_perl development team and numerous contributors.






TOP
previous page: Apache2::ServerRec - Perl API for Apache server record accessorspage up: mod_perl 2.0 APInext page: Apache2::SubProcess -- Executing SubProcesses under mod_perl