User namespaces isolate security-related identifiers and attributes, in particular, user IDs and group IDs (see credentials(7)), the root directory, keys (see keyrings(7)), and capabilities (see capabilities(7)). A process's user and group IDs can be different inside and outside a user namespace. In particular, a process can have a normal unprivileged user ID outside a user namespace while at the same time having a user ID of 0 inside the namespace; in other words, the process has full privileges for operations inside the user namespace, but is unprivileged for operations outside the namespace.
The kernel imposes (since version 3.11) a limit of 32 nested levels of user namespaces. Calls to unshare(2) or clone(2) that would cause this limit to be exceeded fail with the error EUSERS.
Each process is a member of exactly one user namespace. A process created via fork(2) or clone(2) without the CLONE_NEWUSER flag is a member of the same user namespace as its parent. A single-threaded process can join another user namespace with setns(2) if it has the CAP_SYS_ADMIN in that namespace; upon doing so, it gains a full set of capabilities in that namespace.
A call to clone(2) or unshare(2) with the CLONE_NEWUSER flag makes the new child process (for clone(2)) or the caller (for unshare(2)) a member of the new user namespace created by the call.
The NS_GET_PARENT ioctl(2) operation can be used to discover the parental relationship between user namespaces; see ioctl_ns(2).
Note that a call to execve(2) will cause a process's capabilities to be recalculated in the usual way (see capabilities(7)). Consequently, unless the process has a user ID of 0 within the namespace, or the executable file has a nonempty inheritable capabilities mask, the process will lose all capabilities. See the discussion of user and group ID mappings, below.
A call to clone(2) or unshare(2) using the CLONE_NEWUSER flag or a call to setns(2) that moves the caller into another user namespace sets the "securebits" flags (see capabilities(7)) to their default values (all flags disabled) in the child (for clone(2)) or caller (for unshare(2) or setns(2)). Note that because the caller no longer has capabilities in its original user namespace after a call to setns(2), it is not possible for a process to reset its "securebits" flags while retaining its user namespace membership by using a pair of setns(2) calls to move to another user namespace and then return to its original user namespace.
The rules for determining whether or not a process has a capability in a particular user namespace are as follows:
On the other hand, there are many privileged operations that affect resources that are not associated with any namespace type, for example, changing the system (i.e., calendar) time (governed by CAP_SYS_TIME), loading a kernel module (governed by CAP_SYS_MODULE), and creating a device (governed by CAP_MKNOD). Only a process with privileges in the initial user namespace can perform such operations.
Holding CAP_SYS_ADMIN within the user namespace that owns a process's mount namespace allows that process to create bind mounts and mount the following types of filesystems:
Holding CAP_SYS_ADMIN within the user namespace that owns a process's cgroup namespace allows (since Linux 4.6) that process to the mount the cgroup version 2 filesystem and cgroup version 1 named hierarchies (i.e., cgroup filesystems mounted with the "none,name=" option).
Holding CAP_SYS_ADMIN within the user namespace that owns a process's PID namespace allows (since Linux 3.8) that process to mount /proc filesystems.
Note however, that mounting block-based filesystems can be done only by a process that holds CAP_SYS_ADMIN in the initial user namespace.
When a nonuser namespace is created, it is owned by the user namespace in which the creating process was a member at the time of the creation of the namespace. Privileged operations on resources governed by the nonuser namespace require that the process has the necessary capabilities in the user namespace that owns the nonuser namespace.
If CLONE_NEWUSER is specified along with other CLONE_NEW* flags in a single clone(2) or unshare(2) call, the user namespace is guaranteed to be created first, giving the child (clone(2)) or caller (unshare(2)) privileges over the remaining namespaces created by the call. Thus, it is possible for an unprivileged caller to specify this combination of flags.
When a new namespace (other than a user namespace) is created via clone(2) or unshare(2), the kernel records the user namespace of the creating process as the owner of the new namespace. (This association can't be changed.) When a process in the new namespace subsequently performs privileged operations that operate on global resources isolated by the namespace, the permission checks are performed according to the process's capabilities in the user namespace that the kernel associated with the new namespace. For example, suppose that a process attempts to change the hostname (sethostname(2)), a resource governed by the UTS namespace. In this case, the kernel will determine which user namespace owns the process's UTS namespace, and check whether the process has the required capability (CAP_SYS_ADMIN) in that user namespace.
The NS_GET_USERNS ioctl(2) operation can be used to discover the user namespace that owns a nonuser namespace; see ioctl_ns(2).
The description in the following paragraphs explains the details for uid_map; gid_map is exactly the same, but each instance of "user ID" is replaced by "group ID".
The uid_map file exposes the mapping of user IDs from the user namespace of the process pid to the user namespace of the process that opened uid_map (but see a qualification to this point below). In other words, processes that are in different user namespaces will potentially see different values when reading from a particular uid_map file, depending on the user ID mappings for the user namespaces of the reading processes.
Each line in the uid_map file specifies a 1-to-1 mapping of a range of contiguous user IDs between two user namespaces. (When a user namespace is first created, this file is empty.) The specification in each line takes the form of three numbers delimited by white space. The first two numbers specify the starting user ID in each of the two user namespaces. The third number specifies the length of the mapped range. In detail, the fields are interpreted as follows:
System calls that return user IDs (group IDs)---for example, getuid(2), getgid(2), and the credential fields in the structure returned by stat(2)---return the user ID (group ID) mapped into the caller's user namespace.
When a process accesses a file, its user and group IDs are mapped into the initial user namespace for the purpose of permission checking and assigning IDs when creating a file. When a process retrieves file user and group IDs via stat(2), the IDs are mapped in the opposite direction, to produce values relative to the process user and group ID mappings.
The initial user namespace has no parent namespace, but, for consistency, the kernel provides dummy user and group ID mapping files for this namespace. Looking at the uid_map file (gid_map is the same) from a shell in the initial namespace shows:
$ cat /proc/$$/uid_map
0 0 4294967295
This mapping tells us that the range starting at user ID 0 in this namespace maps to a range starting at 0 in the (nonexistent) parent namespace, and the length of the range is the largest 32-bit unsigned integer. This leaves 4294967295 (the 32-bit signed -1 value) unmapped. This is deliberate: (uid_t) -1 is used in several interfaces (e.g., setreuid(2)) as a way to specify "no user ID". Leaving (uid_t) -1 unmapped and unusable guarantees that there will be no confusion when using these interfaces.
The lines written to uid_map (gid_map) must conform to the following rules:
Writes that violate the above rules fail with the error EINVAL.
In order for a process to write to the /proc/[pid]/uid_map (/proc/[pid]/gid_map) file, all of the following requirements must be met:
Writes that violate the above rules fail with the error EPERM.
For user IDs, the relevant system calls include setuid(2), setfsuid(2), setreuid(2), and setresuid(2). For group IDs, the relevant system calls include setgid(2), setfsgid(2), setregid(2), setresgid(2), and setgroups(2).
Writing "deny" to the /proc/[pid]/setgroups file before writing to /proc/[pid]/gid_map will permanently disable setgroups(2) in a user namespace and allow writing to /proc/[pid]/gid_map without having the CAP_SETGID capability in the parent user namespace.
A privileged process (one with the CAP_SYS_ADMIN capability in the namespace) may write either of the strings "allow" or "deny" to this file before writing a group ID mapping for this user namespace to the file /proc/[pid]/gid_map. Writing the string "deny" prevents any process in the user namespace from employing setgroups(2).
The essence of the restrictions described in the preceding paragraph is that it is permitted to write to /proc/[pid]/setgroups only so long as calling setgroups(2) is disallowed because /proc/[pid]/gid_map has not been set. This ensures that a process cannot transition from a state where setgroups(2) is allowed to a state where setgroups(2) is denied; a process can transition only from setgroups(2) being disallowed to setgroups(2) being allowed.
The default value of this file in the initial user namespace is "allow".
Once /proc/[pid]/gid_map has been written to (which has the effect of enabling setgroups(2) in the user namespace), it is no longer possible to disallow setgroups(2) by writing "deny" to /proc/[pid]/setgroups (the write fails with the error EPERM).
A child user namespace inherits the /proc/[pid]/setgroups setting from its parent.
If the setgroups file has the value "deny", then the setgroups(2) system call can't subsequently be reenabled (by writing "allow" to the file) in this user namespace. (Attempts to do so fail with the error EPERM.) This restriction also propagates down to all child user namespaces of this user namespace.
The /proc/[pid]/setgroups file was added in Linux 3.19, but was backported to many earlier stable kernel series, because it addresses a security issue. The issue concerned files with permissions such as "rwx---rwx". Such files give fewer permissions to "group" than they do to "other". This means that dropping groups using setgroups(2) might allow a process file access that it did not formerly have. Before the existence of user namespaces this was not a concern, since only a privileged process (one with the CAP_SETGID capability) could call setgroups(2). However, with the introduction of user namespaces, it became possible for an unprivileged process to create a new namespace in which the user had all privileges. This then allowed formerly unprivileged users to drop groups and thus gain file access that they did not previously have. The /proc/[pid]/setgroups file was added to address this security issue, by denying any pathway for an unprivileged process to drop groups with setgroups(2).
The cases where unmapped IDs are mapped in this fashion include system calls that return user IDs (getuid(2), getgid(2), and similar), credentials passed over a UNIX domain socket, credentials returned by stat(2), waitid(2), and the System V IPC "ctl" IPC_STAT operations, credentials exposed by /proc/[pid]/status and the files in /proc/sysvipc/*, credentials returned via the si_uid field in the siginfo_t received with a signal (see sigaction(2)), credentials written to the process accounting file (see acct(5)), and credentials returned with POSIX message queue notifications (see mq_notify(3)).
There is one notable case where unmapped user and group IDs are not converted to the corresponding overflow ID value. When viewing a uid_map or gid_map file in which there is no mapping for the second field, that field is displayed as 4294967295 (-1 as an unsigned integer).
Within a user namespace, these capabilities allow a process to bypass the rules if the process has the relevant capability over the file, meaning that:
The CAP_FOWNER capability is treated somewhat exceptionally: it allows a process to bypass the corresponding rules so long as at least the file's user ID has a mapping in the user namespace (i.e., the file's group ID does not need to have a valid mapping).
As at Linux 3.8, most relevant subsystems supported user namespaces, but a number of filesystems did not have the infrastructure needed to map user and group IDs between user namespaces. Linux 3.9 added the required infrastructure support for many of the remaining unsupported filesystems (Plan 9 (9P), Andrew File System (AFS), Ceph, CIFS, CODA, NFS, and OCFS2). Linux 3.12 added support for the last of the unsupported major filesystems, XFS.
First, we look at the run-time environment:
$ uname -rs # Need Linux 3.8 or later Linux 3.8.0 $ id -u # Running as unprivileged user 1000 $ id -g 1000
Now start a new shell in new user (-U), mount (-m), and PID (-p) namespaces, with user ID (-M) and group ID (-G) 1000 mapped to 0 inside the user namespace:
$ ./userns_child_exec -p -m -U -M '0 1000 1' -G '0 1000 1' bash
The shell has PID 1, because it is the first process in the new PID namespace:
bash$ echo $$ 1
Mounting a new /proc filesystem and listing all of the processes visible in the new PID namespace shows that the shell can't see any processes outside the PID namespace:
bash$ mount -t proc proc /proc
bash$ ps ax
PID TTY STAT TIME COMMAND
1 pts/3 S 0:00 bash
22 pts/3 R+ 0:00 ps ax
Inside the user namespace, the shell has user and group ID 0, and a full set of permitted and effective capabilities:
bash$ cat /proc/$$/status | egrep 'ha[UG]id'
Uid: 0 0 0 0
Gid: 0 0 0 0
bash$ cat /proc/$$/status | egrep 'haCap(Prm|Inh|Eff)'
CapInh: 0000000000000000
CapPrm: 0000001fffffffff
CapEff: 0000001fffffffff
Licensed under GNU General Public License v2 or later
Create a child process that executes a shell command in new
namespace(s); allow UID and GID mappings to be specified when
creating a user namespace.
*/
#define _GNU_SOURCE
#include <sched.h>
#include <unistd.h>
#include <stdint.h>
#include <stdlib.h>
#include <sys/wait.h>
#include <signal.h>
#include <fcntl.h>
#include <stdio.h>
#include <string.h>
#include <limits.h>
#include <errno.h>
/* A simple error-handling function: print an error message based
on the value in 'errno' and terminate the calling process. */
#define errExit(msg) do { perror(msg); exit(EXIT_FAILURE); \
} while (0)
struct child_args {
char **argv; /* Command to be executed by child, with args */
int pipe_fd[2]; /* Pipe used to synchronize parent and child */
};
static int verbose;
static void
usage(char *pname)
{
fprintf(stderr, "Usage: %s [options] cmd [arg...]\n\n", pname);
fprintf(stderr, "Create a child process that executes a shell "
"command in a new user namespace,\n"
"and possibly also other new namespace(s).\n\n");
fprintf(stderr, "Options can be:\n\n");
#define fpe(str) fprintf(stderr, " %s", str);
fpe("-i New IPC namespace\n");
fpe("-m New mount namespace\n");
fpe("-n New network namespace\n");
fpe("-p New PID namespace\n");
fpe("-u New UTS namespace\n");
fpe("-U New user namespace\n");
fpe("-M uid_map Specify UID map for user namespace\n");
fpe("-G gid_map Specify GID map for user namespace\n");
fpe("-z Map user's UID and GID to 0 in user namespace\n");
fpe(" (equivalent to: -M '0 <uid> 1' -G '0 <gid> 1')\n");
fpe("-v Display verbose messages\n");
fpe("\n");
fpe("If -z, -M, or -G is specified, -U is required.\n");
fpe("It is not permitted to specify both -z and either -M or -G.\n");
fpe("\n");
fpe("Map strings for -M and -G consist of records of the form:\n");
fpe("\n");
fpe(" ID-inside-ns ID-outside-ns len\n");
fpe("\n");
fpe("A map string can contain multiple records, separated"
" by commas;\n");
fpe("the commas are replaced by newlines before writing"
" to map files.\n");
exit(EXIT_FAILURE);
}
/* Update the mapping file 'map_file', with the value provided in
'mapping', a string that defines a UID or GID mapping. A UID or
GID mapping consists of one or more newline-delimited records
of the form:
ID_inside-ns ID-outside-ns length
Requiring the user to supply a string that contains newlines is
of course inconvenient for command-line use. Thus, we permit the
use of commas to delimit records in this string, and replace them
with newlines before writing the string to the file. */
static void
update_map(char *mapping, char *map_file)
{
int fd;
size_t map_len; /* Length of 'mapping' */
/* Replace commas in mapping string with newlines. */
map_len = strlen(mapping);
for (int j = 0; j < map_len; j++)
if (mapping[j] == ',')
mapping[j] = '\n';
fd = open(map_file, O_RDWR);
if (fd == -1) {
fprintf(stderr, "ERROR: open %s: %s\n", map_file,
strerror(errno));
exit(EXIT_FAILURE);
}
if (write(fd, mapping, map_len) != map_len) {
fprintf(stderr, "ERROR: write %s: %s\n", map_file,
strerror(errno));
exit(EXIT_FAILURE);
}
close(fd);
}
/* Linux 3.19 made a change in the handling of setgroups(2) and the
'gid_map' file to address a security issue. The issue allowed
*unprivileged* users to employ user namespaces in order to drop
The upshot of the 3.19 changes is that in order to update the
'gid_maps' file, use of the setgroups() system call in this
user namespace must first be disabled by writing "deny" to one of
the /proc/PID/setgroups files for this namespace. That is the
purpose of the following function. */
static void
proc_setgroups_write(pid_t child_pid, char *str)
{
char setgroups_path[PATH_MAX];
int fd;
snprintf(setgroups_path, PATH_MAX, "/proc/%jd/setgroups",
(intmax_t) child_pid);
fd = open(setgroups_path, O_RDWR);
if (fd == -1) {
/* We may be on a system that doesn't support
/proc/PID/setgroups. In that case, the file won't exist,
and the system won't impose the restrictions that Linux 3.19
added. That's fine: we don't need to do anything in order
to permit 'gid_map' to be updated.
However, if the error from open() was something other than
the ENOENT error that is expected for that case, let the
user know. */
if (errno != ENOENT)
fprintf(stderr, "ERROR: open %s: %s\n", setgroups_path,
strerror(errno));
return;
}
if (write(fd, str, strlen(str)) == -1)
fprintf(stderr, "ERROR: write %s: %s\n", setgroups_path,
strerror(errno));
close(fd);
}
static int /* Start function for cloned child */
childFunc(void *arg)
{
struct child_args *args = arg;
char ch;
/* Wait until the parent has updated the UID and GID mappings.
See the comment in main(). We wait for end of file on a
pipe that will be closed by the parent process once it has
updated the mappings. */
close(args->pipe_fd[1]); /* Close our descriptor for the write
end of the pipe so that we see EOF
when parent closes its descriptor. */
if (read(args->pipe_fd[0], &ch, 1) != 0) {
fprintf(stderr,
"Failure in child: read from pipe returned != 0\n");
exit(EXIT_FAILURE);
}
close(args->pipe_fd[0]);
/* Execute a shell command. */
printf("About to exec %s\n", args->argv[0]);
execvp(args->argv[0], args->argv);
errExit("execvp");
}
#define STACK_SIZE (1024 * 1024)
static char child_stack[STACK_SIZE]; /* Space for child's stack */
int
main(int argc, char *argv[])
{
int flags, opt, map_zero;
pid_t child_pid;
struct child_args args;
char *uid_map, *gid_map;
const int MAP_BUF_SIZE = 100;
char map_buf[MAP_BUF_SIZE];
char map_path[PATH_MAX];
/* Parse command-line options. The initial '+' character in
the final getopt() argument prevents GNU-style permutation
of command-line options. That's useful, since sometimes
the 'command' to be executed by this program itself
has command-line options. We don't want getopt() to treat
those as options to this program. */
flags = 0;
verbose = 0;
gid_map = NULL;
uid_map = NULL;
map_zero = 0;
while ((opt = getopt(argc, argv, "+imnpuUM:G:zv")) != -1) {
switch (opt) {
case 'i': flags |= CLONE_NEWIPC; break;
case 'm': flags |= CLONE_NEWNS; break;
case 'n': flags |= CLONE_NEWNET; break;
case 'p': flags |= CLONE_NEWPID; break;
case 'u': flags |= CLONE_NEWUTS; break;
case 'v': verbose = 1; break;
case 'z': map_zero = 1; break;
case 'M': uid_map = optarg; break;
case 'G': gid_map = optarg; break;
case 'U': flags |= CLONE_NEWUSER; break;
default: usage(argv[0]);
}
}
/* -M or -G without -U is nonsensical */
if (((uid_map != NULL || gid_map != NULL || map_zero) &&
!(flags & CLONE_NEWUSER)) ||
(map_zero && (uid_map != NULL || gid_map != NULL)))
usage(argv[0]);
args.argv = &argv[optind];
/* We use a pipe to synchronize the parent and child, in order to
ensure that the parent sets the UID and GID maps before the child
calls execve(). This ensures that the child maintains its
capabilities during the execve() in the common case where we
want to map the child's effective user ID to 0 in the new user
namespace. Without this synchronization, the child would lose
its capabilities if it performed an execve() with nonzero
user IDs (see the capabilities(7) man page for details of the
transformation of a process's capabilities during execve()). */
if (pipe(args.pipe_fd) == -1)
errExit("pipe");
/* Create the child in new namespace(s). */
child_pid = clone(childFunc, child_stack + STACK_SIZE,
flags | SIGCHLD, &args);
if (child_pid == -1)
errExit("clone");
/* Parent falls through to here. */
if (verbose)
printf("%s: PID of child created by clone() is %jd\n",
argv[0], (intmax_t) child_pid);
/* Update the UID and GID maps in the child. */
if (uid_map != NULL || map_zero) {
snprintf(map_path, PATH_MAX, "/proc/%jd/uid_map",
(intmax_t) child_pid);
if (map_zero) {
snprintf(map_buf, MAP_BUF_SIZE, "0 %jd 1",
(intmax_t) getuid());
uid_map = map_buf;
}
update_map(uid_map, map_path);
}
if (gid_map != NULL || map_zero) {
proc_setgroups_write(child_pid, "deny");
snprintf(map_path, PATH_MAX, "/proc/%jd/gid_map",
(intmax_t) child_pid);
if (map_zero) {
snprintf(map_buf, MAP_BUF_SIZE, "0 %ld 1",
(intmax_t) getgid());
gid_map = map_buf;
}
update_map(gid_map, map_path);
}
/* Close the write end of the pipe, to signal to the child that we
have updated the UID and GID maps. */
close(args.pipe_fd[1]);
if (waitpid(child_pid, NULL, 0) == -1) /* Wait for child */
errExit("waitpid");
if (verbose)
printf("%s: terminating\n", argv[0]);
The kernel source file Documentation/namespaces/resource-control.txt.