DRAND48

Section: POSIX Programmer's Manual (3P)
Updated: 2017
Index Return to Main Contents
 

PROLOG

This manual page is part of the POSIX Programmer's Manual. The Linux implementation of this interface may differ (consult the corresponding Linux manual page for details of Linux behavior), or the interface may not be implemented on Linux. delim $$  

NAME

drand48, erand48, jrand48, lcong48, lrand48, mrand48, nrand48, seed48, srand48 --- generate uniformly distributed pseudo-random numbers  

SYNOPSIS

#include <stdlib.h>

double drand48(void);
double erand48(unsigned short xsubi[3]);
long jrand48(unsigned short xsubi[3]);
void lcong48(unsigned short param[7]);
long lrand48(void);
long mrand48(void);
long nrand48(unsigned short xsubi[3]);
unsigned short *seed48(unsigned short seed16v[3]);
void srand48(long seedval);
 

DESCRIPTION

This family of functions shall generate pseudo-random numbers using a linear congruential algorithm and 48-bit integer arithmetic.

The drand48() and erand48() functions shall return non-negative, double-precision, floating-point values, uniformly distributed over the interval [0.0,1.0).

The lrand48() and nrand48() functions shall return non-negative, long integers, uniformly distributed over the interval [0,231).

The mrand48() and jrand48() functions shall return signed long integers uniformly distributed over the interval [-231,231).

The srand48(), seed48(), and lcong48() functions are initialization entry points, one of which should be invoked before either drand48(), lrand48(), or mrand48() is called. (Although it is not recommended practice, constant default initializer values shall be supplied automatically if drand48(), lrand48(), or mrand48() is called without a prior call to an initialization entry point.) The erand48(), nrand48(), and jrand48() functions do not require an initialization entry point to be called first.

All the routines work by generating a sequence of 48-bit integer values, $X_ i" " ,$ according to the linear congruential formula:

$X sub{n+1} " " = " " (aX_ n" "^+^c) sub{roman mod " " m} " " " " " " " " " " " " " " " " n>= " " 0$

The parameter $m^=^2"^" 48$; hence 48-bit integer arithmetic is performed. Unless lcong48() is invoked, the multiplier value $a$ and the addend value $c$ are given by:

$a " " mark = " " roman "5DEECE66D"^sub 16 " " = " " roman 273673163155^sub 8$

$c " " lineup = " " roman B^sub 16 " " = " " roman 13^sub 8$

The value returned by any of the drand48(), erand48(), jrand48(), lrand48(), mrand48(), or nrand48() functions is computed by first generating the next 48-bit $X_ i$ in the sequence. Then the appropriate number of bits, according to the type of data item to be returned, are copied from the high-order (leftmost) bits of $X_ i$ and transformed into the returned value.

The drand48(), lrand48(), and mrand48() functions store the last 48-bit $X_ i$ generated in an internal buffer; that is why the application shall ensure that these are initialized prior to being invoked. The erand48(), nrand48(), and jrand48() functions require the calling program to provide storage for the successive $X_ i$ values in the array specified as an argument when the functions are invoked. That is why these routines do not have to be initialized; the calling program merely has to place the desired initial value of $X_ i$ into the array and pass it as an argument. By using different arguments, erand48(), nrand48(), and jrand48() allow separate modules of a large program to generate several independent streams of pseudo-random numbers; that is, the sequence of numbers in each stream shall not depend upon how many times the routines are called to generate numbers for the other streams.

The initializer function srand48() sets the high-order 32 bits of $X_ i$ to the low-order 32 bits contained in its argument. The low-order 16 bits of $X_ i$ are set to the arbitrary value $roman 330E_ 16" " .$

The initializer function seed48() sets the value of $X_ i$ to the 48-bit value specified in the argument array. The low-order 16 bits of $X_ i$ are set to the low-order 16 bits of seed16v[0]. The mid-order 16 bits of $X_ i$ are set to the low-order 16 bits of seed16v[1]. The high-order 16 bits of $X_ i$ are set to the low-order 16 bits of seed16v[2]. In addition, the previous value of $X_ i$ is copied into a 48-bit internal buffer, used only by seed48(), and a pointer to this buffer is the value returned by seed48(). This returned pointer, which can just be ignored if not needed, is useful if a program is to be restarted from a given point at some future time---use the pointer to get at and store the last $X_ i$ value, and then use this value to reinitialize via seed48() when the program is restarted.

The initializer function lcong48() allows the user to specify the initial $X_ i" " ,$ the multiplier value $a,$ and the addend value $c.$ Argument array elements param[0-2] specify $X_ i" " ,$ param[3-5] specify the multiplier $a,$ and param[6] specifies the 16-bit addend $c.$ After lcong48() is called, a subsequent call to either srand48() or seed48() shall restore the standard multiplier and addend values, a and c, specified above.

The drand48(), lrand48(), and mrand48() functions need not be thread-safe.  

RETURN VALUE

As described in the DESCRIPTION above.  

ERRORS

No errors are defined.

The following sections are informative.  

EXAMPLES

None.  

APPLICATION USAGE

These functions should be avoided whenever non-trivial requirements (including safety) have to be fulfilled.  

RATIONALE

None.  

FUTURE DIRECTIONS

None.  

SEE ALSO

initstate(), rand()

The Base Definitions volume of POSIX.1-2017, <stdlib.h>  

COPYRIGHT

Portions of this text are reprinted and reproduced in electronic form from IEEE Std 1003.1-2017, Standard for Information Technology -- Portable Operating System Interface (POSIX), The Open Group Base Specifications Issue 7, 2018 Edition, Copyright (C) 2018 by the Institute of Electrical and Electronics Engineers, Inc and The Open Group. In the event of any discrepancy between this version and the original IEEE and The Open Group Standard, the original IEEE and The Open Group Standard is the referee document. The original Standard can be obtained online at http://www.opengroup.org/unix/online.html .

Any typographical or formatting errors that appear in this page are most likely to have been introduced during the conversion of the source files to man page format. To report such errors, see https://www.kernel.org/doc/man-pages/reporting_bugs.html .


 

Index

PROLOG
NAME
SYNOPSIS
DESCRIPTION
RETURN VALUE
ERRORS
EXAMPLES
APPLICATION USAGE
RATIONALE
FUTURE DIRECTIONS
SEE ALSO
COPYRIGHT

This document was created by man2html, using the manual pages.
Time: 06:23:08 GMT, May 09, 2021