command: docker run
short: Run a command in a new container
long: |-
  The `docker run` command first `creates` a writeable container layer over the
  specified image, and then `starts` it using the specified command. That is,
  `docker run` is equivalent to the API `/containers/create` then
  `/containers/(id)/start`. A stopped container can be restarted with all its
  previous changes intact using `docker start`. See `docker ps -a` to view a list
  of all containers.

  The `docker run` command can be used in combination with `docker commit` to
  [*change the command that a container runs*](commit.md). There is additional detailed information about `docker run` in the [Docker run reference](../run.md).

  For information on connecting a container to a network, see the ["*Docker network overview*"](https://docs.docker.com/engine/userguide/networking/).
usage: docker run [OPTIONS] IMAGE [COMMAND] [ARG...]
pname: docker
plink: docker.yaml
options:
- option: add-host
  value_type: list
  description: Add a custom host-to-IP mapping (host:ip)
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: attach
  shorthand: a
  value_type: list
  description: Attach to STDIN, STDOUT or STDERR
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: blkio-weight
  value_type: uint16
  default_value: "0"
  description: |
    Block IO (relative weight), between 10 and 1000, or 0 to disable (default 0)
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: blkio-weight-device
  value_type: list
  default_value: '[]'
  description: Block IO weight (relative device weight)
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: cap-add
  value_type: list
  description: Add Linux capabilities
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: cap-drop
  value_type: list
  description: Drop Linux capabilities
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: cgroup-parent
  value_type: string
  description: Optional parent cgroup for the container
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: cidfile
  value_type: string
  description: Write the container ID to the file
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: cpu-count
  value_type: int64
  default_value: "0"
  description: CPU count (Windows only)
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: cpu-percent
  value_type: int64
  default_value: "0"
  description: CPU percent (Windows only)
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: cpu-period
  value_type: int64
  default_value: "0"
  description: Limit CPU CFS (Completely Fair Scheduler) period
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: cpu-quota
  value_type: int64
  default_value: "0"
  description: Limit CPU CFS (Completely Fair Scheduler) quota
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: cpu-rt-period
  value_type: int64
  default_value: "0"
  description: Limit CPU real-time period in microseconds
  deprecated: false
  min_api_version: "1.25"
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: cpu-rt-runtime
  value_type: int64
  default_value: "0"
  description: Limit CPU real-time runtime in microseconds
  deprecated: false
  min_api_version: "1.25"
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: cpu-shares
  shorthand: c
  value_type: int64
  default_value: "0"
  description: CPU shares (relative weight)
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: cpus
  value_type: decimal
  description: Number of CPUs
  deprecated: false
  min_api_version: "1.25"
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: cpuset-cpus
  value_type: string
  description: CPUs in which to allow execution (0-3, 0,1)
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: cpuset-mems
  value_type: string
  description: MEMs in which to allow execution (0-3, 0,1)
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: detach
  shorthand: d
  value_type: bool
  default_value: "false"
  description: Run container in background and print container ID
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: detach-keys
  value_type: string
  description: Override the key sequence for detaching a container
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: device
  value_type: list
  description: Add a host device to the container
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: device-cgroup-rule
  value_type: list
  description: Add a rule to the cgroup allowed devices list
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: device-read-bps
  value_type: list
  default_value: '[]'
  description: Limit read rate (bytes per second) from a device
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: device-read-iops
  value_type: list
  default_value: '[]'
  description: Limit read rate (IO per second) from a device
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: device-write-bps
  value_type: list
  default_value: '[]'
  description: Limit write rate (bytes per second) to a device
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: device-write-iops
  value_type: list
  default_value: '[]'
  description: Limit write rate (IO per second) to a device
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: disable-content-trust
  value_type: bool
  default_value: "true"
  description: Skip image verification
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: dns
  value_type: list
  description: Set custom DNS servers
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: dns-opt
  value_type: list
  description: Set DNS options
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: dns-option
  value_type: list
  description: Set DNS options
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: dns-search
  value_type: list
  description: Set custom DNS search domains
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: entrypoint
  value_type: string
  description: Overwrite the default ENTRYPOINT of the image
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: env
  shorthand: e
  value_type: list
  description: Set environment variables
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: env-file
  value_type: list
  description: Read in a file of environment variables
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: expose
  value_type: list
  description: Expose a port or a range of ports
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: group-add
  value_type: list
  description: Add additional groups to join
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: health-cmd
  value_type: string
  description: Command to run to check health
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: health-interval
  value_type: duration
  default_value: 0s
  description: Time between running the check (ms|s|m|h) (default 0s)
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: health-retries
  value_type: int
  default_value: "0"
  description: Consecutive failures needed to report unhealthy
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: health-start-period
  value_type: duration
  default_value: 0s
  description: |
    Start period for the container to initialize before starting health-retries countdown (ms|s|m|h) (default 0s)
  deprecated: false
  min_api_version: "1.29"
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: health-timeout
  value_type: duration
  default_value: 0s
  description: |
    Maximum time to allow one check to run (ms|s|m|h) (default 0s)
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: help
  value_type: bool
  default_value: "false"
  description: Print usage
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: hostname
  shorthand: h
  value_type: string
  description: Container host name
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: init
  value_type: bool
  default_value: "false"
  description: |
    Run an init inside the container that forwards signals and reaps processes
  deprecated: false
  min_api_version: "1.25"
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: interactive
  shorthand: i
  value_type: bool
  default_value: "false"
  description: Keep STDIN open even if not attached
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: io-maxbandwidth
  value_type: bytes
  default_value: "0"
  description: |
    Maximum IO bandwidth limit for the system drive (Windows only)
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: io-maxiops
  value_type: uint64
  default_value: "0"
  description: Maximum IOps limit for the system drive (Windows only)
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: ip
  value_type: string
  description: IPv4 address (e.g., 172.30.100.104)
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: ip6
  value_type: string
  description: IPv6 address (e.g., 2001:db8::33)
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: ipc
  value_type: string
  description: IPC mode to use
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: isolation
  value_type: string
  description: Container isolation technology
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: kernel-memory
  value_type: bytes
  default_value: "0"
  description: Kernel memory limit
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: label
  shorthand: l
  value_type: list
  description: Set meta data on a container
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: label-file
  value_type: list
  description: Read in a line delimited file of labels
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: link
  value_type: list
  description: Add link to another container
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: link-local-ip
  value_type: list
  description: Container IPv4/IPv6 link-local addresses
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: log-driver
  value_type: string
  description: Logging driver for the container
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: log-opt
  value_type: list
  description: Log driver options
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: mac-address
  value_type: string
  description: Container MAC address (e.g., 92:d0:c6:0a:29:33)
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: memory
  shorthand: m
  value_type: bytes
  default_value: "0"
  description: Memory limit
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: memory-reservation
  value_type: bytes
  default_value: "0"
  description: Memory soft limit
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: memory-swap
  value_type: bytes
  default_value: "0"
  description: |
    Swap limit equal to memory plus swap: '-1' to enable unlimited swap
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: memory-swappiness
  value_type: int64
  default_value: "-1"
  description: Tune container memory swappiness (0 to 100)
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: mount
  value_type: mount
  description: Attach a filesystem mount to the container
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: name
  value_type: string
  description: Assign a name to the container
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: net
  value_type: string
  default_value: default
  description: Connect a container to a network
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: net-alias
  value_type: list
  description: Add network-scoped alias for the container
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: network
  value_type: string
  default_value: default
  description: Connect a container to a network
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: network-alias
  value_type: list
  description: Add network-scoped alias for the container
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: no-healthcheck
  value_type: bool
  default_value: "false"
  description: Disable any container-specified HEALTHCHECK
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: oom-kill-disable
  value_type: bool
  default_value: "false"
  description: Disable OOM Killer
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: oom-score-adj
  value_type: int
  default_value: "0"
  description: Tune host's OOM preferences (-1000 to 1000)
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: pid
  value_type: string
  description: PID namespace to use
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: pids-limit
  value_type: int64
  default_value: "0"
  description: Tune container pids limit (set -1 for unlimited)
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: platform
  value_type: string
  description: Set platform if server is multi-platform capable
  deprecated: false
  min_api_version: "1.32"
  experimental: true
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: privileged
  value_type: bool
  default_value: "false"
  description: Give extended privileges to this container
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: publish
  shorthand: p
  value_type: list
  description: Publish a container's port(s) to the host
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: publish-all
  shorthand: P
  value_type: bool
  default_value: "false"
  description: Publish all exposed ports to random ports
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: read-only
  value_type: bool
  default_value: "false"
  description: Mount the container's root filesystem as read only
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: restart
  value_type: string
  default_value: "no"
  description: Restart policy to apply when a container exits
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: rm
  value_type: bool
  default_value: "false"
  description: Automatically remove the container when it exits
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: runtime
  value_type: string
  description: Runtime to use for this container
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: security-opt
  value_type: list
  description: Security Options
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: shm-size
  value_type: bytes
  default_value: "0"
  description: Size of /dev/shm
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: sig-proxy
  value_type: bool
  default_value: "true"
  description: Proxy received signals to the process
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: stop-signal
  value_type: string
  default_value: SIGTERM
  description: Signal to stop a container
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: stop-timeout
  value_type: int
  default_value: "0"
  description: Timeout (in seconds) to stop a container
  deprecated: false
  min_api_version: "1.25"
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: storage-opt
  value_type: list
  description: Storage driver options for the container
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: sysctl
  value_type: map
  default_value: map[]
  description: Sysctl options
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: tmpfs
  value_type: list
  description: Mount a tmpfs directory
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: tty
  shorthand: t
  value_type: bool
  default_value: "false"
  description: Allocate a pseudo-TTY
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: ulimit
  value_type: ulimit
  default_value: '[]'
  description: Ulimit options
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: user
  shorthand: u
  value_type: string
  description: 'Username or UID (format: <name|uid>[:<group|gid>])'
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: userns
  value_type: string
  description: User namespace to use
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: uts
  value_type: string
  description: UTS namespace to use
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: volume
  shorthand: v
  value_type: list
  description: Bind mount a volume
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: volume-driver
  value_type: string
  description: Optional volume driver for the container
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: volumes-from
  value_type: list
  description: Mount volumes from the specified container(s)
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
- option: workdir
  shorthand: w
  value_type: string
  description: Working directory inside the container
  deprecated: false
  experimental: false
  experimentalcli: false
  kubernetes: false
  swarm: false
examples: |-
  ### Assign name and allocate pseudo-TTY (--name, -it)

  ```bash
  $ docker run --name test -it debian

  root@d6c0fe130dba:/# exit 13
  $ echo $?
  13
  $ docker ps -a | grep test
  d6c0fe130dba        debian:7            "/bin/bash"         26 seconds ago      Exited (13) 17 seconds ago                         test
  ```

  This example runs a container named `test` using the `debian:latest`
  image. The `-it` instructs Docker to allocate a pseudo-TTY connected to
  the container's stdin; creating an interactive `bash` shell in the container.
  In the example, the `bash` shell is quit by entering
  `exit 13`. This exit code is passed on to the caller of
  `docker run`, and is recorded in the `test` container's metadata.

  ### Capture container ID (--cidfile)

  ```bash
  $ docker run --cidfile /tmp/docker_test.cid ubuntu echo "test"
  ```

  This will create a container and print `test` to the console. The `cidfile`
  flag makes Docker attempt to create a new file and write the container ID to it.
  If the file exists already, Docker will return an error. Docker will close this
  file when `docker run` exits.

  ### Full container capabilities (--privileged)

  ```bash
  $ docker run -t -i --rm ubuntu bash
  root@bc338942ef20:/# mount -t tmpfs none /mnt
  mount: permission denied
  ```

  This will *not* work, because by default, most potentially dangerous kernel
  capabilities are dropped; including `cap_sys_admin` (which is required to mount
  filesystems). However, the `--privileged` flag will allow it to run:

  ```bash
  $ docker run -t -i --privileged ubuntu bash
  root@50e3f57e16e6:/# mount -t tmpfs none /mnt
  root@50e3f57e16e6:/# df -h
  Filesystem      Size  Used Avail Use% Mounted on
  none            1.9G     0  1.9G   0% /mnt
  ```

  The `--privileged` flag gives *all* capabilities to the container, and it also
  lifts all the limitations enforced by the `device` cgroup controller. In other
  words, the container can then do almost everything that the host can do. This
  flag exists to allow special use-cases, like running Docker within Docker.

  ### Set working directory (-w)

  ```bash
  $ docker  run -w /path/to/dir/ -i -t  ubuntu pwd
  ```

  The `-w` lets the command being executed inside directory given, here
  `/path/to/dir/`. If the path does not exist it is created inside the container.

  ### Set storage driver options per container

  ```bash
  $ docker run -it --storage-opt size=120G fedora /bin/bash
  ```

  This (size) will allow to set the container rootfs size to 120G at creation time.
  This option is only available for the `devicemapper`, `btrfs`, `overlay2`,
  `windowsfilter` and `zfs` graph drivers.
  For the `devicemapper`, `btrfs`, `windowsfilter` and `zfs` graph drivers,
  user cannot pass a size less than the Default BaseFS Size.
  For the `overlay2` storage driver, the size option is only available if the
  backing fs is `xfs` and mounted with the `pquota` mount option.
  Under these conditions, user can pass any size less than the backing fs size.

  ### Mount tmpfs (--tmpfs)

  ```bash
  $ docker run -d --tmpfs /run:rw,noexec,nosuid,size=65536k my_image
  ```

  The `--tmpfs` flag mounts an empty tmpfs into the container with the `rw`,
  `noexec`, `nosuid`, `size=65536k` options.

  ### Mount volume (-v, --read-only)

  ```bash
  $ docker  run  -v `pwd`:`pwd` -w `pwd` -i -t  ubuntu pwd
  ```

  The `-v` flag mounts the current working directory into the container. The `-w`
  lets the command being executed inside the current working directory, by
  changing into the directory to the value returned by `pwd`. So this
  combination executes the command using the container, but inside the
  current working directory.

  ```bash
  $ docker run -v /doesnt/exist:/foo -w /foo -i -t ubuntu bash
  ```

  When the host directory of a bind-mounted volume doesn't exist, Docker
  will automatically create this directory on the host for you. In the
  example above, Docker will create the `/doesnt/exist`
  folder before starting your container.

  ```bash
  $ docker run --read-only -v /icanwrite busybox touch /icanwrite/here
  ```

  Volumes can be used in combination with `--read-only` to control where
  a container writes files. The `--read-only` flag mounts the container's root
  filesystem as read only prohibiting writes to locations other than the
  specified volumes for the container.

  ```bash
  $ docker run -t -i -v /var/run/docker.sock:/var/run/docker.sock -v /path/to/static-docker-binary:/usr/bin/docker busybox sh
  ```

  By bind-mounting the docker unix socket and statically linked docker
  binary (refer to [get the linux binary](
  https://docs.docker.com/engine/installation/binaries/#/get-the-linux-binary)),
  you give the container the full access to create and manipulate the host's
  Docker daemon.

  On Windows, the paths must be specified using Windows-style semantics.

  ```powershell
  PS C:\> docker run -v c:\foo:c:\dest microsoft/nanoserver cmd /s /c type c:\dest\somefile.txt
  Contents of file

  PS C:\> docker run -v c:\foo:d: microsoft/nanoserver cmd /s /c type d:\somefile.txt
  Contents of file
  ```

  The following examples will fail when using Windows-based containers, as the
  destination of a volume or bind mount inside the container must be one of:
  a non-existing or empty directory; or a drive other than C:. Further, the source
  of a bind mount must be a local directory, not a file.

  ```powershell
  net use z: \\remotemachine\share
  docker run -v z:\foo:c:\dest ...
  docker run -v \\uncpath\to\directory:c:\dest ...
  docker run -v c:\foo\somefile.txt:c:\dest ...
  docker run -v c:\foo:c: ...
  docker run -v c:\foo:c:\existing-directory-with-contents ...
  ```

  For in-depth information about volumes, refer to [manage data in containers](https://docs.docker.com/engine/tutorials/dockervolumes/)


  ### Add bind mounts or volumes using the --mount flag

  The `--mount` flag allows you to mount volumes, host-directories and `tmpfs`
  mounts in a container.

  The `--mount` flag supports most options that are supported by the `-v` or the
  `--volume` flag, but uses a different syntax. For in-depth information on the
  `--mount` flag, and a comparison between `--volume` and `--mount`, refer to
  the [service create command reference](service_create.md#add-bind-mounts-or-volumes).

  Even though there is no plan to deprecate `--volume`, usage of `--mount` is recommended.

  Examples:

  ```bash
  $ docker run --read-only --mount type=volume,target=/icanwrite busybox touch /icanwrite/here
  ```

  ```bash
  $ docker run -t -i --mount type=bind,src=/data,dst=/data busybox sh
  ```

  ### Publish or expose port (-p, --expose)

  ```bash
  $ docker run -p 127.0.0.1:80:8080/tcp ubuntu bash
  ```

  This binds port `8080` of the container to TCP port `80` on `127.0.0.1` of the host
  machine. You can also specify `udp` and `sctp` ports.
  The [Docker User Guide](https://docs.docker.com/engine/userguide/networking/default_network/dockerlinks/)
  explains in detail how to manipulate ports in Docker.

  ```bash
  $ docker run --expose 80 ubuntu bash
  ```

  This exposes port `80` of the container without publishing the port to the host
  system's interfaces.

  ### Set environment variables (-e, --env, --env-file)

  ```bash
  $ docker run -e MYVAR1 --env MYVAR2=foo --env-file ./env.list ubuntu bash
  ```

  Use the `-e`, `--env`, and `--env-file` flags to set simple (non-array)
  environment variables in the container you're running, or overwrite variables
  that are defined in the Dockerfile of the image you're running.

  You can define the variable and its value when running the container:

  ```bash
  $ docker run --env VAR1=value1 --env VAR2=value2 ubuntu env | grep VAR
  VAR1=value1
  VAR2=value2
  ```

  You can also use variables that you've exported to your local environment:

  ```bash
  export VAR1=value1
  export VAR2=value2

  $ docker run --env VAR1 --env VAR2 ubuntu env | grep VAR
  VAR1=value1
  VAR2=value2
  ```

  When running the command, the Docker CLI client checks the value the variable
  has in your local environment and passes it to the container.
  If no `=` is provided and that variable is not exported in your local
  environment, the variable won't be set in the container.

  You can also load the environment variables from a file. This file should use
  the syntax `<variable>=value` (which sets the variable to the given value) or
  `<variable>` (which takes the value from the local environment), and `#` for comments.

  ```bash
  $ cat env.list
  # This is a comment
  VAR1=value1
  VAR2=value2
  USER

  $ docker run --env-file env.list ubuntu env | grep VAR
  VAR1=value1
  VAR2=value2
  USER=denis
  ```

  ### Set metadata on container (-l, --label, --label-file)

  A label is a `key=value` pair that applies metadata to a container. To label a container with two labels:

  ```bash
  $ docker run -l my-label --label com.example.foo=bar ubuntu bash
  ```

  The `my-label` key doesn't specify a value so the label defaults to an empty
  string(`""`). To add multiple labels, repeat the label flag (`-l` or `--label`).

  The `key=value` must be unique to avoid overwriting the label value. If you
  specify labels with identical keys but different values, each subsequent value
  overwrites the previous. Docker uses the last `key=value` you supply.

  Use the `--label-file` flag to load multiple labels from a file. Delimit each
  label in the file with an EOL mark. The example below loads labels from a
  labels file in the current directory:

  ```bash
  $ docker run --label-file ./labels ubuntu bash
  ```

  The label-file format is similar to the format for loading environment
  variables. (Unlike environment variables, labels are not visible to processes
  running inside a container.) The following example illustrates a label-file
  format:

  ```none
  com.example.label1="a label"

  # this is a comment
  com.example.label2=another\ label
  com.example.label3
  ```

  You can load multiple label-files by supplying multiple  `--label-file` flags.

  For additional information on working with labels, see [*Labels - custom
  metadata in Docker*](https://docs.docker.com/engine/userguide/labels-custom-metadata/) in the Docker User
  Guide.

  ### Connect a container to a network (--network)

  When you start a container use the `--network` flag to connect it to a network.
  This adds the `busybox` container to the `my-net` network.

  ```bash
  $ docker run -itd --network=my-net busybox
  ```

  You can also choose the IP addresses for the container with `--ip` and `--ip6`
  flags when you start the container on a user-defined network.

  ```bash
  $ docker run -itd --network=my-net --ip=10.10.9.75 busybox
  ```

  If you want to add a running container to a network use the `docker network connect` subcommand.

  You can connect multiple containers to the same network. Once connected, the
  containers can communicate easily need only another container's IP address
  or name. For `overlay` networks or custom plugins that support multi-host
  connectivity, containers connected to the same multi-host network but launched
  from different Engines can also communicate in this way.

  > **Note**: Service discovery is unavailable on the default bridge network.
  > Containers can communicate via their IP addresses by default. To communicate
  > by name, they must be linked.

  You can disconnect a container from a network using the `docker network
  disconnect` command.

  ### Mount volumes from container (--volumes-from)

  ```bash
  $ docker run --volumes-from 777f7dc92da7 --volumes-from ba8c0c54f0f2:ro -i -t ubuntu pwd
  ```

  The `--volumes-from` flag mounts all the defined volumes from the referenced
  containers. Containers can be specified by repetitions of the `--volumes-from`
  argument. The container ID may be optionally suffixed with `:ro` or `:rw` to
  mount the volumes in read-only or read-write mode, respectively. By default,
  the volumes are mounted in the same mode (read write or read only) as
  the reference container.

  Labeling systems like SELinux require that proper labels are placed on volume
  content mounted into a container. Without a label, the security system might
  prevent the processes running inside the container from using the content. By
  default, Docker does not change the labels set by the OS.

  To change the label in the container context, you can add either of two suffixes
  `:z` or `:Z` to the volume mount. These suffixes tell Docker to relabel file
  objects on the shared volumes. The `z` option tells Docker that two containers
  share the volume content. As a result, Docker labels the content with a shared
  content label. Shared volume labels allow all containers to read/write content.
  The `Z` option tells Docker to label the content with a private unshared label.
  Only the current container can use a private volume.

  ### Attach to STDIN/STDOUT/STDERR (-a)

  The `-a` flag tells `docker run` to bind to the container's `STDIN`, `STDOUT`
  or `STDERR`. This makes it possible to manipulate the output and input as
  needed.

  ```bash
  $ echo "test" | docker run -i -a stdin ubuntu cat -
  ```

  This pipes data into a container and prints the container's ID by attaching
  only to the container's `STDIN`.

  ```bash
  $ docker run -a stderr ubuntu echo test
  ```

  This isn't going to print anything unless there's an error because we've
  only attached to the `STDERR` of the container. The container's logs
  still store what's been written to `STDERR` and `STDOUT`.

  ```bash
  $ cat somefile | docker run -i -a stdin mybuilder dobuild
  ```

  This is how piping a file into a container could be done for a build.
  The container's ID will be printed after the build is done and the build
  logs could be retrieved using `docker logs`. This is
  useful if you need to pipe a file or something else into a container and
  retrieve the container's ID once the container has finished running.

  ### Add host device to container (--device)

  ```bash
  $ docker run --device=/dev/sdc:/dev/xvdc \
               --device=/dev/sdd --device=/dev/zero:/dev/nulo \
               -i -t \
               ubuntu ls -l /dev/{xvdc,sdd,nulo}

  brw-rw---- 1 root disk 8, 2 Feb  9 16:05 /dev/xvdc
  brw-rw---- 1 root disk 8, 3 Feb  9 16:05 /dev/sdd
  crw-rw-rw- 1 root root 1, 5 Feb  9 16:05 /dev/nulo
  ```

  It is often necessary to directly expose devices to a container. The `--device`
  option enables that. For example, a specific block storage device or loop
  device or audio device can be added to an otherwise unprivileged container
  (without the `--privileged` flag) and have the application directly access it.

  By default, the container will be able to `read`, `write` and `mknod` these devices.
  This can be overridden using a third `:rwm` set of options to each `--device`
  flag:

  ```bash
  $ docker run --device=/dev/sda:/dev/xvdc --rm -it ubuntu fdisk  /dev/xvdc

  Command (m for help): q
  $ docker run --device=/dev/sda:/dev/xvdc:r --rm -it ubuntu fdisk  /dev/xvdc
  You will not be able to write the partition table.

  Command (m for help): q

  $ docker run --device=/dev/sda:/dev/xvdc:rw --rm -it ubuntu fdisk  /dev/xvdc

  Command (m for help): q

  $ docker run --device=/dev/sda:/dev/xvdc:m --rm -it ubuntu fdisk  /dev/xvdc
  fdisk: unable to open /dev/xvdc: Operation not permitted
  ```

  > **Note**: `--device` cannot be safely used with ephemeral devices. Block devices
  > that may be removed should not be added to untrusted containers with
  > `--device`.

  ### Restart policies (--restart)

  Use Docker's `--restart` to specify a container's *restart policy*. A restart
  policy controls whether the Docker daemon restarts a container after exit.
  Docker supports the following restart policies:

  | Policy                     | Result                                                                                                                                                                                                                                                           |
  |:---------------------------|:-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
  | `no`                       | Do not automatically restart the container when it exits. This is the default.                                                                                                                                                                                   |
  | `on-failure[:max-retries]` | Restart only if the container exits with a non-zero exit status. Optionally, limit the number of restart retries the Docker daemon attempts.                                                                                                                     |
  | `unless-stopped`           | Restart the container unless it is explicitly stopped or Docker itself is stopped or restarted. |
  | `always`                   | Always restart the container regardless of the exit status. When you specify always, the Docker daemon will try to restart the container indefinitely. The container will also always start on daemon startup, regardless of the current state of the container. |

  ```bash
  $ docker run --restart=always redis
  ```

  This will run the `redis` container with a restart policy of **always**
  so that if the container exits, Docker will restart it.

  More detailed information on restart policies can be found in the
  [Restart Policies (--restart)](../run.md#restart-policies-restart)
  section of the Docker run reference page.

  ### Add entries to container hosts file (--add-host)

  You can add other hosts into a container's `/etc/hosts` file by using one or
  more `--add-host` flags. This example adds a static address for a host named
  `docker`:

  ```bash
  $ docker run --add-host=docker:10.180.0.1 --rm -it debian

  root@f38c87f2a42d:/# ping docker
  PING docker (10.180.0.1): 48 data bytes
  56 bytes from 10.180.0.1: icmp_seq=0 ttl=254 time=7.600 ms
  56 bytes from 10.180.0.1: icmp_seq=1 ttl=254 time=30.705 ms
  ^C--- docker ping statistics ---
  2 packets transmitted, 2 packets received, 0% packet loss
  round-trip min/avg/max/stddev = 7.600/19.152/30.705/11.553 ms
  ```

  Sometimes you need to connect to the Docker host from within your
  container. To enable this, pass the Docker host's IP address to
  the container using the `--add-host` flag. To find the host's address,
  use the `ip addr show` command.

  The flags you pass to `ip addr show` depend on whether you are
  using IPv4 or IPv6 networking in your containers. Use the following
  flags for IPv4 address retrieval for a network device named `eth0`:

  ```bash
  $ HOSTIP=`ip -4 addr show scope global dev eth0 | grep inet | awk '{print \$2}' | cut -d / -f 1`
  $ docker run  --add-host=docker:${HOSTIP} --rm -it debian
  ```

  For IPv6 use the `-6` flag instead of the `-4` flag. For other network
  devices, replace `eth0` with the correct device name (for example `docker0`
  for the bridge device).

  ### Set ulimits in container (--ulimit)

  Since setting `ulimit` settings in a container requires extra privileges not
  available in the default container, you can set these using the `--ulimit` flag.
  `--ulimit` is specified with a soft and hard limit as such:
  `<type>=<soft limit>[:<hard limit>]`, for example:

  ```bash
  $ docker run --ulimit nofile=1024:1024 --rm debian sh -c "ulimit -n"
  1024
  ```

  > **Note**: If you do not provide a `hard limit`, the `soft limit` will be used
  > for both values. If no `ulimits` are set, they will be inherited from
  > the default `ulimits` set on the daemon.  `as` option is disabled now.
  > In other words, the following script is not supported:
  >
  > ```bash
  > $ docker run -it --ulimit as=1024 fedora /bin/bash`
  > ```

  The values are sent to the appropriate `syscall` as they are set.
  Docker doesn't perform any byte conversion. Take this into account when setting the values.

  #### For `nproc` usage

  Be careful setting `nproc` with the `ulimit` flag as `nproc` is designed by Linux to set the
  maximum number of processes available to a user, not to a container.  For example, start four
  containers with `daemon` user:

  ```bash
  $ docker run -d -u daemon --ulimit nproc=3 busybox top

  $ docker run -d -u daemon --ulimit nproc=3 busybox top

  $ docker run -d -u daemon --ulimit nproc=3 busybox top

  $ docker run -d -u daemon --ulimit nproc=3 busybox top
  ```

  The 4th container fails and reports "[8] System error: resource temporarily unavailable" error.
  This fails because the caller set `nproc=3` resulting in the first three containers using up
  the three processes quota set for the `daemon` user.

  ### Stop container with signal (--stop-signal)

  The `--stop-signal` flag sets the system call signal that will be sent to the container to exit.
  This signal can be a valid unsigned number that matches a position in the kernel's syscall table, for instance 9,
  or a signal name in the format SIGNAME, for instance SIGKILL.

  ### Optional security options (--security-opt)

  On Windows, this flag can be used to specify the `credentialspec` option.
  The `credentialspec` must be in the format `file://spec.txt` or `registry://keyname`.

  ### Stop container with timeout (--stop-timeout)

  The `--stop-timeout` flag sets the timeout (in seconds) that a pre-defined (see `--stop-signal`) system call
  signal that will be sent to the container to exit. After timeout elapses the container will be killed with SIGKILL.

  ### Specify isolation technology for container (--isolation)

  This option is useful in situations where you are running Docker containers on
  Windows. The `--isolation <value>` option sets a container's isolation technology.
  On Linux, the only supported is the `default` option which uses
  Linux namespaces. These two commands are equivalent on Linux:

  ```bash
  $ docker run -d busybox top
  $ docker run -d --isolation default busybox top
  ```

  On Windows, `--isolation` can take one of these values:


  | Value     | Description                                                                                |
  |:----------|:-------------------------------------------------------------------------------------------|
  | `default` | Use the value specified by the Docker daemon's `--exec-opt` or system default (see below). |
  | `process` | Shared-kernel namespace isolation (not supported on Windows client operating systems).     |
  | `hyperv`  | Hyper-V hypervisor partition-based isolation.                                              |

  The default isolation on Windows server operating systems is `process`. The default (and only supported)
  isolation on Windows client operating systems is `hyperv`. An attempt to start a container on a client
  operating system with `--isolation process` will fail.

  On Windows server, assuming the default configuration, these commands are equivalent
  and result in `process` isolation:

  ```PowerShell
  PS C:\> docker run -d microsoft/nanoserver powershell echo process
  PS C:\> docker run -d --isolation default microsoft/nanoserver powershell echo process
  PS C:\> docker run -d --isolation process microsoft/nanoserver powershell echo process
  ```

  If you have set the `--exec-opt isolation=hyperv` option on the Docker `daemon`, or
  are running against a Windows client-based daemon, these commands are equivalent and
  result in `hyperv` isolation:

  ```PowerShell
  PS C:\> docker run -d microsoft/nanoserver powershell echo hyperv
  PS C:\> docker run -d --isolation default microsoft/nanoserver powershell echo hyperv
  PS C:\> docker run -d --isolation hyperv microsoft/nanoserver powershell echo hyperv
  ```

  ### Specify hard limits on memory available to containers (-m, --memory)

  These parameters always set an upper limit on the memory available to the container. On Linux, this
  is set on the cgroup and applications in a container can query it at `/sys/fs/cgroup/memory/memory.limit_in_bytes`.

  On Windows, this will affect containers differently depending on what type of isolation is used.

  - With `process` isolation, Windows will report the full memory of the host system, not the limit to applications running inside the container

      ```powershell
      PS C:\> docker run -it -m 2GB --isolation=process microsoft/nanoserver powershell Get-ComputerInfo *memory*

      CsTotalPhysicalMemory      : 17064509440
      CsPhyicallyInstalledMemory : 16777216
      OsTotalVisibleMemorySize   : 16664560
      OsFreePhysicalMemory       : 14646720
      OsTotalVirtualMemorySize   : 19154928
      OsFreeVirtualMemory        : 17197440
      OsInUseVirtualMemory       : 1957488
      OsMaxProcessMemorySize     : 137438953344
      ```

  - With `hyperv` isolation, Windows will create a utility VM that is big enough to hold the memory limit, plus the minimal OS needed to host the container. That size is reported as "Total Physical Memory."

      ```powershell
      PS C:\> docker run -it -m 2GB --isolation=hyperv microsoft/nanoserver powershell Get-ComputerInfo *memory*

      CsTotalPhysicalMemory      : 2683355136
      CsPhyicallyInstalledMemory :
      OsTotalVisibleMemorySize   : 2620464
      OsFreePhysicalMemory       : 2306552
      OsTotalVirtualMemorySize   : 2620464
      OsFreeVirtualMemory        : 2356692
      OsInUseVirtualMemory       : 263772
      OsMaxProcessMemorySize     : 137438953344
      ```


  ### Configure namespaced kernel parameters (sysctls) at runtime

  The `--sysctl` sets namespaced kernel parameters (sysctls) in the
  container. For example, to turn on IP forwarding in the containers
  network namespace, run this command:

  ```bash
  $ docker run --sysctl net.ipv4.ip_forward=1 someimage
  ```

  > **Note**: Not all sysctls are namespaced. Docker does not support changing sysctls
  > inside of a container that also modify the host system. As the kernel
  > evolves we expect to see more sysctls become namespaced.

  #### Currently supported sysctls

  - `IPC Namespace`:

    ```none
    kernel.msgmax, kernel.msgmnb, kernel.msgmni, kernel.sem, kernel.shmall, kernel.shmmax, kernel.shmmni, kernel.shm_rmid_forced
    Sysctls beginning with fs.mqueue.*
    ```

    If you use the `--ipc=host` option these sysctls will not be allowed.

  - `Network Namespace`:

    Sysctls beginning with net.*

    If you use the `--network=host` option using these sysctls will not be allowed.
deprecated: false
experimental: false
experimentalcli: false
kubernetes: false
swarm: false

