16 SQL Statements Relevant to Data Guard

This chapter summarizes the SQL and SQL*Plus statements that are useful for performing operations on standby databases in a Data Guard environment. This chapter includes the following topics:

ALTER DATABASE Statements
ALTER SESSION Statements
ALTER SYSTEM Statements

This chapter contains only the syntax and a brief summary of particular SQL statements. You must refer to the Oracle Database SQL Language Reference for complete syntax and descriptions about these and other SQL statements.

See Chapter 14 for a list of initialization parameters that you can set and dynamically update using the ALTER SYSTEM SET statement.

16.1 ALTER DATABASE Statements

Table 16-1 describes ALTER DATABASE statements that are relevant to Data Guard.

Table 16-1 ALTER DATABASE Statements Used in Data Guard Environments

ALTER DATABASE Statement	Description
`ADD` `[STANDBY`] `LOGFILE [THREAD` integer`] [GROUP` integer`]` `filespec`	Adds one or more online redo log file groups or standby redo log file groups to the specified thread, making the log files available to the instance to which the thread is assigned. See Section 9.3.5 for an example of this statement.
`ADD [STANDBY`] `LOGFILE` `MEMBER` 'filename' `[REUSE]` `TO` logfile-descriptor	Adds new members to existing online redo log file groups or standby redo log file groups.
`[ADD`\|`DROP`] `SUPPLEMENTAL` `LOG` `DATA {PRIMARY KEY\|UNIQUE INDEX}` `COLUMNS`	This statement is for logical standby databases only. Use it to enable full supplemental logging before you create a logical standby database. This is necessary because supplemental logging is the source of change to a logical standby database. To implement full supplemental logging, you must specify either the `PRIMARY KEY COLUMNS` or the `UNIQUE INDEX COLUMNS` keyword on this statement. See Oracle Database SQL Language Reference for more information.
`COMMIT TO SWITCHOVER`	Performs a switchover to: Change the current primary database to the standby database role Change one standby database to the primary database role. Note: On logical standby databases, you issue the `ALTER DATABASE PREPARE TO SWITCHOVER` statement to prepare the database for the switchover before you issue the `ALTER DATABASE COMMIT TO SWITCHOVER` statement. See Section 8.2.1 and Section 8.3.1 for examples of this statement. Also see Oracle Database SQL Language Reference for information about the complete syntax for this statement.
`CONVERT TO [[PHYSICAL\|SNAPSHOT] STANDBY] DATABASE`	Converts a physical standby database into a snapshot standby database and vice versa.
`CREATE [PHYSICAL\|LOGICAL] STANDBY CONTROLFILE AS '`filename`' [REUSE]`	Creates a control file to be used to maintain a physical or a logical standby database. Issue this statement on the primary database. See Section 3.2.2 for an example of this statement.
`DROP [STANDBY] LOGFILE` logfile_descriptor	Drops all members of an online redo log file group or standby redo log file group. See Section 9.3.5 for an example of this statement.
`DROP [STANDBY] LOGFILE MEMBER` 'filename'	Drops one or more online redo log file members or standby redo log file members.
`[NO]FORCE LOGGING`	Controls whether or not the Oracle database logs all changes in the database except for changes to temporary tablespaces and temporary segments. The `[NO]FORCE LOGGING` clause is required to prevent inconsistent standby databases.: The primary database must be mounted but not open when you issue this statement. See Section 3.1.1 for an example of this statement.
`GUARD`	Controls user access to tables in a logical standby database. Possible values are `ALL`, `STANDBY`, and `NONE`. See Section 10.2 for more information.
`MOUNT` [`STANDBY DATABASE`]	Mounts a standby database, allowing the standby instance to receive redo data from the primary instance.
`OPEN`	Opens a previously started and mounted database: Physical standby databases are opened in read-only mode, restricting users to read-only transactions and preventing the generating of redo data. Logical standby database are opened in read/write mode.
`PREPARE` `TO` `SWITCHOVER`	This statement is for logical standby databases only. It prepares the primary database and the logical standby database for a switchover by building the LogMiner dictionary before the switchover takes place. After the dictionary build has completed, issue the `ALTER DATABASE COMMIT TO SWITCHOVER` statement to switch the roles of the primary and logical standby databases. See Section 8.3.1 for examples of this statement. Also see Oracle Database SQL Language Reference for information about the complete syntax for this statement.
`RECOVER MANAGED STANDBY DATABASE [ { DISCONNECT [FROM SESSION] \| USING CURRENT LOGFILE \| NODELAY \| UNTIL CHANGE integer }...]`	This statement starts and controls Redo Apply on physical standby databases . You can use the `RECOVER MANAGED STANDBY DATABASE` clause on a physical standby database that is mounted, open, or closed. See Step 4 in Section 3.2.6 and Section 7.3 for examples. Note: Several clauses and keywords were deprecated and are supported for backward compatibility only. See Oracle Database SQL Language Reference for more information about these clauses.
`RECOVER` `MANAGED` `STANDBY` `DATABASE` `CANCEL`	The `CANCEL` clause cancels Redo Apply on a physical standby database after applying the current archived redo log file. Note: Several clauses and keywords were deprecated and are supported for backward compatibility only. See Oracle Database SQL Language Reference for more information about these clauses.
`RECOVER` `MANAGED` `STANDBY` `DATABASE` `FINISH`	The `FINISH` clause initiates failover on the target physical standby database and recovers the current standby redo log files. Use the `FINISH` clause only in the event of the failure of the primary database. This clause overrides any delay intervals specified. See Step 4 in Section 8.2.2 for examples. Note: Several clauses and keywords were deprecated and are supported for backward compatibility only. See Oracle Database SQL Language Reference for more information about these clauses.
`REGISTER [OR REPLACE] [PHYSICAL\|LOGICAL] LOGFILE` `filespec`	Allows the registration of manually copied archived redo log files. Note: This command should be issued only after manually copying the corresponding archived redo log file to the standby database. Issuing this command while the log file is in the process of being copied or when the log file does not exist may result in errors on the standby database at a later time.
`RECOVER TO LOGICAL STANDBY` new_database_name	Instructs apply services to continue applying changes to the physical standby database until you issue the command to convert the database to a logical standby database. See Section 4.2.4.1 for more information.
`RESET DATABASE TO INCARNATION` integer	Resets the target recovery incarnation for the database from the current incarnation to a different incarnation.
`SET` `STANDBY` `DATABASE` `TO` `MAXIMIZE` {`PROTECTION`\|`AVAILABILITY`\|`PERFORMANCE`}	Use this clause to specify the level of protection for the data in your Data Guard configuration. You specify this clause from the primary database, which must be mounted but not open.
`START LOGICAL STANDBY APPLY INITIAL` [scn-value] ] [`NEW PRIMARY` dblink]	This statement is for logical standby databases only.It starts SQL Apply on a logical standby database. See Section 7.4.1 for examples of this statement.
`{STOP\|ABORT} LOGICAL STANDBY APPLY`	This statement is for logical standby databases only.Use the `STOP` clause to stop SQL Apply on a logical standby database in an orderly fashion. Use the `ABORT` clause to stop SQL Apply abruptly. See Section 8.3.2 for an example of this statement.
`ACTIVATE [PHYSICAL\|LOGICAL] STANDBY DATABASE FINISH APPLY]`	Performs a failover. The standby database must be mounted before it can be activated with this statement. Note: Do not use the `ALTER DATABASE ACTIVATE STANDBY DATABASE` statement to failover because it causes data loss. Instead, use the following best practices: For physical standby databases, use the `ALTER DATABASE RECOVER MANAGED STANDBY DATABASE` statement with the `FINISH` keyword to perform the role transition as quickly as possible with little or no data loss and without rendering other standby databases unusable. For logical standby databases, use the `ALTER DATABASE PREPARE TO SWITCHOVER` and `ALTER DATABASE COMMIT TO SWITCHOVER` statements.

16.2 ALTER SESSION Statements

Table 16-2 describes the ALTER SESSION statements that are relevant to Data Guard.

Table 16-2 ALTER SESSION Statements Used in Data Guard Environments

ALTER SESSION Statement Description

ALTER SESSION Statement	Description
`ALTER` `SESSION` [`ENABLE`\|`DISABLE`] `GUARD`	This statement is for logical standby databases only. This statement allows privileged users to turn the database guard on and off for the current session. See Section 10.5.4 for more information.
`ALTER SESSION SYNC WITH PRIMARY`	This statement is for physical standby databases only. This statement synchronizes a physical standby database with the primary database, by blocking until all redo data received by the physical standby at the time of statement invocation has been applied. See Section 9.2.1.3 for more information.

ALTER SESSION [ENABLE|DISABLE] GUARD

This statement is for logical standby databases only.

This statement allows privileged users to turn the database guard on and off for the current session.

See Section 10.5.4 for more information.

ALTER SESSION SYNC WITH PRIMARY

This statement is for physical standby databases only.

This statement synchronizes a physical standby database with the primary database, by blocking until all redo data received by the physical standby at the time of statement invocation has been applied.

See Section 9.2.1.3 for more information.

16.3 ALTER SYSTEM Statements

Table 16-3 describes the ALTER SYSTEM statements that are relevant to Data Guard.

Table 16-3 ALTER SYSTEM Statements Used in Data Guard Environments

ALTER SYSTEM Statement Description

ALTER SYSTEM Statement	Description
`ALTER SYSTEM FLUSH REDO TO target_db_name [[NO] CONFIRM APPLY]`	This statement flushes redo data from a primary database to a standby database and optionally waits for the flushed redo data to be applied to a physical or logical standby database. This statement must be issued on a mounted, but not open, primary database.

ALTER SYSTEM FLUSH REDO TO target_db_name [[NO] CONFIRM APPLY]

This statement flushes redo data from a primary database to a standby database and optionally waits for the flushed redo data to be applied to a physical or logical standby database.

This statement must be issued on a mounted, but not open, primary database.