Skip Headers
Oracle® Database Utilities
11g Release 2 (11.2)

Part Number E22490-04
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Index
Index
Go to Master Index
Master Index
Go to Feedback page
Contact Us

Go to previous page
Previous
Go to next page
Next
PDF · Mobi · ePub

4 Data Pump Legacy Mode

If you use original Export (exp) and Import (imp), then you may have scripts you have been using for many years. To ease the transition to the newer Data Pump Export and Import utilities, Data Pump provides a legacy mode which allows you to continue to use your existing scripts with Data Pump.

Data Pump enters legacy mode once it determines a parameter unique to original Export or Import is present, either on the command line or in a script. As Data Pump processes the parameter, the analogous Data Pump Export or Data Pump Import parameter is displayed. Oracle strongly recommends that you view the new syntax and make script changes as time permits.

Note:

Data Pump Export and Import only handle dump files and log files in the Data Pump format. They never create or read dump files compatible with original Export or Import. If you have a dump file created with original Export, then you must use original Import to import the data into the database.

This chapter contains the following sections:

Parameter Mappings

This section describes how original Export and Import parameters map to the Data Pump Export and Import parameters that supply similar functionality.

Using Original Export Parameters with Data Pump

Data Pump Export accepts original Export parameters when they map to a corresponding Data Pump parameter. Table 4-1 describes how Data Pump Export interprets original Export parameters. Parameters that have the same name and functionality in both original Export and Data Pump Export are not included in this table.

Table 4-1 How Data Pump Export Handles Original Export Parameters

Original Export Parameter Action Taken by Data Pump Export Parameter
BUFFER

This parameter is ignored.

COMPRESS

This parameter is ignored. In original Export, the COMPRESS parameter affected how the initial extent was managed. Setting COMPRESS=n caused original Export to use current storage parameters for the initial and next extent.

The Data Pump Export COMPRESSION parameter is used to specify how data is compressed in the dump file, and is not related to the original Export COMPRESS parameter.

CONSISTENT

Data Pump Export determines the current time and uses FLASHBACK_TIME.

CONSTRAINTS

If original Export used CONSTRAINTS=n, then Data Pump Export uses EXCLUDE=CONSTRAINTS.

The default behavior is to include constraints as part of the export.

DIRECT 

This parameter is ignored. Data Pump Export automatically chooses the best export method.

FEEDBACK

The Data Pump Export STATUS=30 command is used. Note that this is not a direct mapping because the STATUS command returns the status of the export job, as well as the rows being processed.

In original Export, feedback was given after a certain number of rows, as specified with the FEEDBACK command. In Data Pump Export, the status is given every so many seconds, as specified by STATUS.

FILE

Data Pump Export attempts to determine the path that was specified or defaulted to for the FILE parameter, and also to determine whether a directory object exists to which the schema has read and write access.

See "Management of File Locations in Data Pump Legacy Mode" for more information about how Data Pump handles the original Export FILE parameter.

GRANTS

If original Export used GRANTS=n, then Data Pump Export uses EXCLUDE=GRANT.

If original Export used GRANTS=y, then the parameter is ignored and does not need to be remapped because that is the Data Pump Export default behavior.

INDEXES

If original Export used INDEXES=n, then Data Pump Export uses the EXCLUDE=INDEX parameter.

If original Export used INDEXES=y, then the parameter is ignored and does not need to be remapped because that is the Data Pump Export default behavior.

LOG

Data Pump Export attempts to determine the path that was specified or defaulted to for the LOG parameter, and also to determine whether a directory object exists to which the schema has read and write access.

See "Management of File Locations in Data Pump Legacy Mode" for more information about how Data Pump handles the original Export LOG parameter.

The contents of the log file will be those of a Data Pump Export operation. See "Log Files" for information about log file location and content.

OBJECT_CONSISTENT

This parameter is ignored because Data Pump Export processing ensures that each object is in a consistent state when being exported.

OWNER

The Data Pump SCHEMAS parameter is used.

RECORDLENGTH

This parameter is ignored because Data Pump Export automatically takes care of buffer sizing.

RESUMABLE

This parameter is ignored because Data Pump Export automatically provides this functionality to users who have been granted the EXP_FULL_DATABASE role.

RESUMABLE_NAME

This parameter is ignored because Data Pump Export automatically provides this functionality to users who have been granted the EXP_FULL_DATABASE role.

RESUMABLE_TIMEOUT

This parameter is ignored because Data Pump Export automatically provides this functionality to users who have been granted the EXP_FULL_DATABASE role.

ROWS

If original Export used ROWS=y, then Data Pump Export uses the CONTENT=ALL parameter.

If original Export used ROWS=n, then Data Pump Export uses the CONTENT=METADATA_ONLY parameter.

STATISTICS

This parameter is ignored because statistics are always saved for tables as part of a Data Pump export operation.

TABLESPACES

If original Export also specified TRANSPORT_TABLESPACE=n, then Data Pump Export ignores the TABLESPACES parameter.

If original Export also specified TRANSPORT_TABLESPACE=y, then Data Pump Export takes the names listed for the TABLESPACES parameter and uses them on the Data Pump Export TRANSPORT_TABLESPACES parameter.

TRANSPORT_TABLESPACE

If original Export used TRANSPORT_TABLESPACE=n (the default), then Data Pump Export uses the TABLESPACES parameter.

If original Export used TRANSPORT_TABLESPACE=y, then Data Pump Export uses the TRANSPORT_TABLESPACES parameter and only the metadata is exported.

TRIGGERS

If original Export used TRIGGERS=n, then Data Pump Export uses the EXCLUDE=TRIGGER parameter.

If original Export used TRIGGERS=y, then the parameter is ignored and does not need to be remapped because that is the Data Pump Export default behavior.

TTS_FULL_CHECK

If original Export used TTS_FULL_CHECK=y, then Data Pump Export uses the TRANSPORT_FULL_CHECK parameter.

If original Export used TTS_FULL_CHECK=y, then the parameter is ignored and does not need to be remapped because that is the Data Pump Export default behavior.

VOLSIZE

When the original Export VOLSIZE parameter is used, it means the location specified for the dump file is a tape device. The Data Pump Export dump file format does not support tape devices. Therefore, this operation terminates with an error.


Using Original Import Parameters with Data Pump

Data Pump Import accepts original Import parameters when they map to a corresponding Data Pump parameter. Table 4-2 describes how Data Pump Import interprets original Import parameters. Parameters that have the same name and functionality in both original Import and Data Pump Import are not included in this table.

Table 4-2 How Data Pump Import Handles Original Import Parameters

Original Import Parameter Action Taken by Data Pump Import Parameter
BUFFER

This parameter is ignored.

CHARSET

This parameter was desupported several releases ago and should no longer be used. It will cause the Data Pump Import operation to abort.

COMMIT

This parameter is ignored. Data Pump Import automatically performs a commit after each table is processed.

COMPILE

This parameter is ignored. Data Pump Import compiles procedures after they are created. A recompile can be executed if necessary for dependency reasons.

CONSTRAINTS

If original Import used CONSTRAINTS=n, then Data Pump Import uses the EXCLUDE=CONSTRAINT parameter.

If original Import used CONSTRAINTS=y, then the parameter is ignored and does not need to be remapped because that is the Data Pump Import default behavior.

DATAFILES

The Data Pump Import TRANSPORT_DATAFILES parameter is used.

DESTROY

If original Import used DESTROY=y, then Data Pump Import uses the REUSE_DATAFILES=y parameter.

If original Import used DESTROY=n, then the parameter is ignored and does not need to be remapped because that is the Data Pump Import default behavior.

FEEDBACK

The Data Pump Import STATUS=30 command is used. Note that this is not a direct mapping because the STATUS command returns the status of the import job, as well as the rows being processed.

In original Import, feedback was given after a certain number of rows, as specified with the FEEDBACK command. In Data Pump Import, the status is given every so many seconds, as specified by STATUS.

FILE

Data Pump Import attempts to determine the path that was specified or defaulted to for the FILE parameter, and also to determine whether a directory object exists to which the schema has read and write access.

See "Management of File Locations in Data Pump Legacy Mode" for more information about how Data Pump handles the original Import FILE parameter.

FILESIZE

This parameter is ignored because the information is already contained in the Data Pump dump file set.

FROMUSER

The Data Pump Import SCHEMAS parameter is used. If FROMUSER was used without TOUSER also being used, then import schemas that have the IMP_FULL_DATABASE role cause Data Pump Import to attempt to create the schema and then import that schema's objects. Import schemas that do not have the IMP_FULL_DATABASE role can only import their own schema from the dump file set.

GRANTS

If original Import used GRANTS=n, then Data Pump Import uses the EXCLUDE=OBJECT_GRANT parameter.

If original Import used GRANTS=y, then the parameter is ignored and does not need to be remapped because that is the Data Pump Import default behavior.

IGNORE

If original Import used IGNORE=y, then Data Pump Import uses the TABLE_EXISTS_ACTION=APPEND parameter. This causes the processing of table data to continue.

If original Import used IGNORE=n, then the parameter is ignored and does not need to be remapped because that is the Data Pump Import default behavior.

INDEXES

If original Import used INDEXES=n, then Data Pump Import uses the EXCLUDE=INDEX parameter.

If original Import used INDEXES=y, then the parameter is ignored and does not need to be remapped because that is the Data Pump Import default behavior.

INDEXFILE

The Data Pump Import SQLFILE={directory-object:}filename and INCLUDE=INDEX parameters are used.

The same method and attempts made when looking for a directory object described for the FILE parameter also take place for the INDEXFILE parameter.

If no directory object was specified on the original Import, then Data Pump Import uses the directory object specified with the DIRECTORY parameter.

LOG

Data Pump Import attempts to determine the path that was specified or defaulted to for the LOG parameter, and also to determine whether a directory object exists to which the schema has read and write access.

See "Management of File Locations in Data Pump Legacy Mode" for more information about how Data Pump handles the original Import LOG parameter.

The contents of the log file will be those of a Data Pump Import operation. See "Log Files" for information about log file location and content.

RECORDLENGTH

This parameter is ignored because Data Pump handles issues about record length internally.

RESUMABLE

This parameter is ignored because this functionality is automatically provided for users who have been granted the IMP_FULL_DATABASE role.

RESUMABLE_NAME

This parameter is ignored because this functionality is automatically provided for users who have been granted the IMP_FULL_DATABASE role.

RESUMABLE_TIMEOUT

This parameter is ignored because this functionality is automatically provided for users who have been granted the IMP_FULL_DATABASE role.

ROWS=N

If original Import used ROWS=n, then Data Pump Import uses the CONTENT=METADATA_ONLY parameter.

If original Import used ROWS=y, then Data Pump Import uses the CONTENT=ALL parameter.

SHOW

If SHOW=y is specified, then the Data Pump Import SQLFILE=[directory_object:]file_name parameter is used to write the DDL for the import operation to a file. Only the DDL (not the entire contents of the dump file) is written to the specified file. (Note that the output is not shown on the screen as it was in original Import.)

The name of the file will be the file name specified on the DUMPFILE parameter (or on the original Import FILE parameter, which is remapped to DUMPFILE). If multiple dump file names are listed, then the first file name in the list is used. The file will be located in the directory object location specified on the DIRECTORY parameter or the directory object included on the DUMPFILE parameter. (Directory objects specified on the DUMPFILE parameter take precedence.)

STATISTICS

This parameter is ignored because statistics are always saved for tables as part of a Data Pump Import operation.

STREAMS_CONFIGURATION

This parameter is ignored because Data Pump Import automatically determines it; it does not need to be specified.

STREAMS_INSTANTIATION

This parameter is ignored because Data Pump Import automatically determines it; it does not need to be specified

TABLESPACES

If original Import also specified TRANSPORT_TABLESPACE=n (the default), then Data Pump Import ignores the TABLESPACES parameter.

If original Import also specified TRANSPORT_TABLESPACE=y, then Data Pump Import takes the names supplied for this TABLESPACES parameter and applies them to the Data Pump Import TRANSPORT_TABLESPACES parameter.

TOID_NOVALIDATE

This parameter is ignored. OIDs are no longer used for type validation.

TOUSER

The Data Pump Import REMAP_SCHEMA parameter is used. There may be more objects imported than with original Import. Also, Data Pump Import may create the target schema if it does not already exist.

The FROMUSER parameter must also have been specified in original Import or the operation will fail.

TRANSPORT_TABLESPACE

The TRANSPORT_TABLESPACE parameter is ignored, but if you also specified the DATAFILES parameter, then the import job continues to load the metadata. If the DATAFILES parameter is not specified, then an ORA-39002:invalid operation error message is returned.

TTS_OWNERS 

This parameter is ignored because this information is automatically stored in the Data Pump dump file set.

VOLSIZE

When the original Import VOLSIZE parameter is used, it means the location specified for the dump file is a tape device. The Data Pump Import dump file format does not support tape devices. Therefore, this operation terminates with an error.


Management of File Locations in Data Pump Legacy Mode

Original Export and Import and Data Pump Export and Import differ on where dump files and log files can be written to and read from because the original version is client-based and Data Pump is server-based.

Original Export and Import use the FILE and LOG parameters to specify dump file and log file names, respectively. These file names always refer to files local to the client system and they may also contain a path specification.

Data Pump Export and Import use the DUMPFILE and LOGFILE parameters to specify dump file and log file names, respectively. These file names always refer to files local to the server system and cannot contain any path information. Instead, a directory object is used to indirectly specify path information. The path value defined by the directory object must be accessible to the server. The directory object is specified for a Data Pump job through the DIRECTORY parameter. It is also possible to prepend a directory object to the file names passed to the DUMPFILE and LOGFILE parameters. For privileged users, Data Pump supports the use of a default directory object if one is not specified on the command line. This default directory object, DATA_PUMP_DIR, is set up at installation time.

If Data Pump legacy mode is enabled and the original Export FILE=filespec parameter and/or LOG=filespec parameter are present on the command line, then the following rules of precedence are used to determine a file's location:

Note:

If the FILE parameter and LOG parameter are both present on the command line, then the rules of precedence are applied separately to each parameter.

Also, when a mix of original Export/Import and Data Pump Export/Import parameters are used, separate rules apply to them. For example, suppose you have the following command:

expdp system FILE=/user/disk/foo.dmp LOGFILE=foo.log DIRECTORY=dpump_dir

The Data Pump legacy mode file management rules, as explained in this section, would apply to the FILE parameter. The normal (that is, non-legacy mode) Data Pump file management rules, as described in "Default Locations for Dump, Log, and SQL Files", would apply to the LOGFILE parameter.

  1. If a path location is specified as part of the file specification, then Data Pump attempts to look for a directory object accessible to the schema executing the export job whose path location matches the path location of the file specification. If such a directory object cannot be found, then an error is returned. For example, assume that a server-based directory object named USER_DUMP_FILES has been defined with a path value of '/disk1/user1/dumpfiles/' and that read and write access to this directory object has been granted to the hr schema. The following command causes Data Pump to look for a server-based directory object whose path value contains '/disk1/user1/dumpfiles/' and to which the hr schema has been granted read and write access:

    expdp hr FILE=/disk1/user1/dumpfiles/hrdata.dmp
    

    In this case, Data Pump uses the directory object USER_DUMP_FILES. The path value, in this example '/disk1/user1/dumpfiles/', must refer to a path on the server system that is accessible to the Oracle Database.

    If a path location is specified as part of the file specification, then any directory object provided using the DIRECTORY parameter is ignored. For example, if the following command is issued, then Data Pump does not use the DPUMP_DIR directory object for the file parameter, but instead looks for a server-based directory object whose path value contains '/disk1/user1/dumpfiles/' and to which the hr schema has been granted read and write access:

    expdp hr FILE=/disk1/user1/dumpfiles/hrdata.dmp DIRECTORY=dpump_dir
    
  2. If no path location is specified as part of the file specification, then the directory object named by the DIRECTORY parameter is used. For example, if the following command is issued, then Data Pump applies the path location defined for the DPUMP_DIR directory object to the hrdata.dmp file:

    expdp hr FILE=hrdata.dmp DIRECTORY=dpump_dir
    
  3. If no path location is specified as part of the file specification and no directory object is named by the DIRECTORY parameter, then Data Pump does the following, in the order shown:

    1. Data Pump looks for the existence of a directory object of the form DATA_PUMP_DIR_schema_name, where schema_name is the schema that is executing the Data Pump job. For example, the following command would cause Data Pump to look for the existence of a server-based directory object named DATA_PUMP_DIR_HR:

      expdp hr FILE=hrdata.dmp
      

      The hr schema also must have been granted read and write access to this directory object. If such a directory object does not exist, then the process moves to step b.

    2. Data Pump looks for the existence of the client-based environment variable DATA_PUMP_DIR. For instance, assume that a server-based directory object named DUMP_FILES1 has been defined and the hr schema has been granted read and write access to it. Then on the client system, the environment variable DATA_PUMP_DIR can be set to point to DUMP_FILES1 as follows:

      setenv DATA_PUMP_DIR DUMP_FILES1
      expdp hr FILE=hrdata.dmp
      

      Data Pump then uses the served-based directory object DUMP_FILES1 for the hrdata.dmp file.

      If a client-based environment variable DATA_PUMP_DIR does not exist, then the process moves to step c.

    3. If the schema that is executing the Data Pump job has DBA privileges, then the default Data Pump directory object, DATA_PUMP_DIR, is used. This default directory object is established at installation time. For example, the following command causes Data Pump to attempt to use the default DATA_PUMP_DIR directory object, assuming that system has DBA privileges:

      expdp system FILE=hrdata.dmp
      

See Also:

"Default Locations for Dump, Log, and SQL Files" for information about Data Pump file management rules of precedence under normal Data Pump conditions (that is, non-legacy mode)

Adjusting Existing Scripts for Data Pump Log Files and Errors

Data Pump legacy mode requires that you review and update your existing scripts written for original Export and Import because of differences in file format and error reporting.

Log Files

Data Pump Export and Import do not generate log files in the same format as those created by original Export and Import. Any scripts you have that parse the output of original Export and Import must be updated to handle the log file format used by Data Pump Export and Import. For example, the message Successfully Terminated does not appear in Data Pump log files.

Error Cases

Data Pump Export and Import may not produce the same errors as those generated by original Export and Import. For example, if a parameter that is ignored by Data Pump Export would have had an out-of-range value in original Export, then an informational message is written to the log file stating that the parameter is being ignored. No value checking is performed, therefore no error message is generated.

Exit Status

Data Pump Export and Import have enhanced exit status values to allow scripts to better determine the success of failure of export and import jobs. Any scripts that look at the exit status should be reviewed and updated, if necessary.