mod_perl logo perl icon
no previous pagepage up: mod_perl 2.0 APInext page: Apache2::CmdParms - Perl API for Apache command parameters object

Apache2::Access - A Perl API for Apache request object: Access, Authentication and Authorization.






mod_perl Pocket Reference

mod_perl Pocket Reference

By Andrew Ford
Writing Apache Modules with Perl and C

Writing Apache Modules with Perl and C

By Lincoln Stein, Doug MacEachern
Embedding Perl in HTML with Mason

Embedding Perl in HTML with Mason

By Dave Rolsky, Ken Williams
mod_perl2 User's Guide

mod_perl2 User's Guide

By Stas Bekman, Jim Brandt
Practical mod_perl

Practical mod_perl

By Stas Bekman, Eric Cholet
The mod_perl Developer's Cookbook

The mod_perl Developer's Cookbook

By Geoffrey Young, Paul Lindner, Randy Kobes


Table of Contents

Synopsis

  use Apache2::Access ();
  
  # allow only GET method
  $r->allow_methods(1, qw(GET));
  
  # Apache Options value
  $options = $r->allow_options();
  
  # Apache AllowOverride value
  $allow_override = $r->allow_overrides();
  
  # which Options are allowed by AllowOverride (since Apache 2.2)
  $allow_override_opts = $r->allow_override_opts();
  
  # auth name ("foo bar")
  $auth_name = $r->auth_name();
  
  # auth type
  $auth_type = $r->auth_type();
  $r->auth_type("Digest");
  
  # Basic authentication process
  my ($rc, $passwd) = $r->get_basic_auth_pw();
  
  # the login name of the remote user (RFC1413)
  $remote_logname = $r->get_remote_logname();
  
  # dynamically figure out which auth has failed
  $r->note_auth_failure();
  
  # note Basic auth failure
  $r->note_basic_auth_failure();
  
  # note Digest auth failure
  $r->note_digest_auth_failure();
  
  # Apache Request value(s)
  $requires = $r->requires();
  
  # Apache Satisfy value (as a number)
  $satisfy = $r->satisfies();
  
  # check whether some auth is configured
  $need_auth = $r->some_auth_required();


TOP

Description

The API provided by this module deals with access, authentication and authorization phases.

Apache2::Access extends Apache2::RequestRec.



TOP

API

Apache2::Access provides the following functions and/or methods:



TOP

allow_methods

Specify which HTTP methods are allowed

  $r->allow_methods($reset);
  $r->allow_methods($reset, @methods);

For example: here is how to allow only GET and POST methods, regardless to what was the previous setting:

  $r->allow_methods(1, qw(GET POST));


TOP

allow_options

Retrieve the value of Options for this request

  $options = $r->allow_options();

For example if the configuration for the current request was:

  Options None
  Options Indexes FollowSymLinks

The following applies:

  use Apache2::Const -compile => qw(:options);
  $r->allow_options & Apache2::Const::OPT_INDEXES;   # TRUE
  $r->allow_options & Apache2::Const::OPT_SYM_LINKS; # TRUE
  $r->allow_options & Apache2::Const::OPT_EXECCGI;   # FALSE


TOP

allow_overrides

Retrieve the value of AllowOverride for this request

  $allow_override = $r->allow_overrides();

For example if the configuration for the current request was:

  AllowOverride AuthConfig

The following applies:

  use Apache2::Const -compile => qw(:override);
  $r->allow_overrides & Apache2::Const::OR_AUTHCFG; # TRUE
  $r->allow_overrides & Apache2::Const::OR_LIMIT; # FALSE


TOP

allow_override_opts

Retrieve the bitmask of allowed Options set by AllowOverride Options=... for this request

  $override_opts = $r->allow_override_opts();

Enabling single options was introduced in Apache 2.2. For Apache 2.0 this function returns Apache2::Const::OPT_UNSET | Apache2::Const::OPT_ALL | Apache2::Const::OPT_INCNOEXEC | Apache2::Const::OPT_SYM_OWNER | Apache2::Const::OPT_MULTI, which corresponds to the default value (if not set) for Apache 2.2.

For example if the configuration for the current request was:

  AllowOverride Options=Indexes,ExecCGI

The following applies:

  use Apache2::Const -compile => qw(:options);
  $r->allow_override_opts & Apache2::Const::OPT_EXECCGI; # TRUE
  $r->allow_override_opts & Apache2::Const::OPT_SYM_LINKS; # FALSE


TOP

auth_name

Get/set the current Authorization realm (the per directory configuration directive AuthName):

  $auth_name = $r->auth_name();
  $auth_name = $r->auth_name($new_auth_name);

The AuthName directive creates protection realm within the server document space. To quote RFC 1945 "These realms allow the protected resources on a server to be partitioned into a set of protection spaces, each with its own authentication scheme and/or authorization database." The client uses the root URL of the server to determine which authentication credentials to send with each HTTP request. These credentials are tagged with the name of the authentication realm that created them. Then during the authentication stage the server uses the current authentication realm, from $r->auth_name, to determine which set of credentials to authenticate.



TOP

auth_type

Get/set the type of authorization required for this request (the per directory configuration directive AuthType):

  $auth_type = $r->auth_type();
  $auth_type = $r->auth_type($new_auth_type);

Normally AuthType would be set to Basic to use the basic authentication scheme defined in RFC 1945, Hypertext Transfer Protocol -- HTTP/1.0. However, you could set to something else and implement your own authentication scheme.



TOP

get_basic_auth_pw

Get the password from the request headers

  my ($rc, $passwd) = $r->get_basic_auth_pw();

If AuthType is not set, this handler first sets it to Basic.



TOP

get_remote_logname

Retrieve the login name of the remote user (RFC1413)

  $remote_logname = $r->get_remote_logname();

Do not confuse this method with $r->user, which provides the username provided by the user during the server authentication.



TOP

note_auth_failure

Setup the output headers so that the client knows how to authenticate itself the next time, if an authentication request failed. This function works for both basic and digest authentication

  $r->note_auth_failure();

This method requires AuthType to be set to Basic or Digest. Depending on the setting it'll call either $r->note_basic_auth_failure or $r->note_digest_auth_failure.



TOP

note_basic_auth_failure

Setup the output headers so that the client knows how to authenticate itself the next time, if an authentication request failed. This function works only for basic authentication

  $r->note_basic_auth_failure();


TOP

note_digest_auth_failure

Setup the output headers so that the client knows how to authenticate itself the next time, if an authentication request failed. This function works only for digest authentication.

  $r->note_digest_auth_failure();


TOP

requires

Retrieve information about all of the requires directives for this request

  $requires = $r->requires

This is normally used for access control.

For example if the configuration had the following require directives:

    Require user  goo bar
    Require group bar tar

this method will return the following datastructure:

  [
    {
      'method_mask' => -1,
      'requirement' => 'user goo bar'
    },
    {
      'method_mask' => -1,
      'requirement' => 'group bar tar'
    }
  ];

The requirement field is what was passed to the Require directive. The method_mask field is a bitmask which can be modified by the Limit directive, but normally it can be safely ignored as it's mostly used internally. For example if the configuration was:

    Require user goo bar
    Require group bar tar
    <Limit POST>
       Require valid-user
    </Limit>

and the request method was POST, $r->requires will return:

  [
    {
      'method_mask' => -1,
      'requirement' => 'user goo bar'
    },
    {
      'method_mask' => -1,
      'requirement' => 'group bar tar'
    }
    {
      'method_mask' => 4,
      'requirement' => 'valid-user'
    }
  ];

But if the request method was GET, it will return only:

  [
    {
      'method_mask' => -1,
      'requirement' => 'user goo bar'
    },
    {
      'method_mask' => -1,
      'requirement' => 'group bar tar'
    }
  ];

As you can see Apache gives you the requirements relevant for the current request, so the method_mask is irrelevant.

It is also a good time to remind that in the general case, access control directives should not be placed within a <Limit> section. Refer to the Apache documentation for more information.

Using the same configuration and assuming that the request was of type POST, the following code inside an Auth handler:

  my %require =
      map { my ($k, $v) = split /\s+/, $_->{requirement}, 2; ($k, $v||'') }
      @{ $r->requires };

will populate %require with the following pairs:

  'group' => 'bar tar',
  'user' => 'goo bar',
  'valid-user' => '',


TOP

satisfies

How the requires lines must be met. What's the applicable value of the Satisfy directive:

  $satisfy = $r->satisfies();

See the documentation for the Satisfy directive in the Apache documentation.



TOP

some_auth_required

Can be used within any handler to determine if any authentication is required for the current request:

  $need_auth = $r->some_auth_required();


TOP

See Also

mod_perl 2.0 documentation.



TOP

Copyright

mod_perl 2.0 and its core modules are copyrighted under The Apache Software License, Version 2.0.



TOP

Authors

The mod_perl development team and numerous contributors.






TOP
no previous pagepage up: mod_perl 2.0 APInext page: Apache2::CmdParms - Perl API for Apache command parameters object