Skip Headers
Oracle® Database Installation Guide
11g Release 2 (11.2) for Oracle Solaris

Part Number E24346-03
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Index
Index
Go to Master Index
Master Index
Go to Feedback page
Contact Us

Go to previous page
Previous
Go to next page
Next
PDF · Mobi · ePub

A Installing and Configuring Oracle Database Using Response Files

This appendix describes how to install and configure Oracle products using response files. It includes information about the following topics:

A.1 How Response Files Work

You can automate the installation and configuration of Oracle software, either fully or partially, by specifying a response file when you start Oracle Universal Installer. Oracle Universal Installer uses the values contained in the response file to provide answers to some or all of Oracle Universal Installer prompts. It includes information about the following topics:

Typically, Oracle Universal Installer runs in interactive mode, which means that it prompts you to provide information in graphical user interface (GUI) screens. When you use response files to provide this information, you run Oracle Universal Installer at a command prompt using either of the following modes:

You define the settings for a silent or response file installation by entering values for the variables listed in the response file. For instance, to specify the Oracle home location, you would supply the appropriate value for the ORACLE_HOME variable, as follows:

ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1

Another way of specifying the response file's variable settings is to pass them as command line arguments when you run Oracle Universal Installer. For example:

-silent directory_path

In this command, directory_path is the path to the database directory on the installation media or on the hard drive.

This method is particularly useful if you do not want to embed sensitive information, such as passwords, in the response file. For example:

-silent "s_dlgRBOPassword=password" ...

Ensure that you enclose the variable and its setting in quotation marks.

See Also:

A.1.1 Reasons for Using Silent Mode or Response File Mode

The following table describes several reasons why you might want to run Oracle Universal Installer in silent mode or response file mode.

Mode Uses
Silent Use silent mode to:
  • Complete an unattended installation, which you might schedule using operating system utilities such as cron

  • Complete several similar installations on multiple systems without user interaction

  • Install the software on a system that does not have X Window System software installed on it

Oracle Universal Installer displays progress information in the terminal that you used to start it, but it does not display any of Oracle Universal Installer screens.

Response File Use response file mode to complete similar Oracle software installations on multiple systems, providing default answers to some, but not all of Oracle Universal Installer prompts.

In response file mode, all the installer screens are displayed, but defaults for the fields in these screens are provided by the response file. You must provide information for the fields in screens where you have not provided values in the response file.


A.1.2 Creating a Database Using Oracle Automatic Storage Management as the Storage Option for Database Files

Before you create a database that uses Oracle Automatic Storage Management (Oracle ASM), you must run the root.sh script. For this reason, you cannot create a database using Oracle ASM as the storage option for database files during a silent-mode installation. Instead, you can complete a software-only installation using silent mode, and then run Oracle Net Configuration Assistant and Database Configuration Assistant in silent mode after you complete the software-only installation and run the root.sh script.

Note:

This limitation applies only to databases that use Oracle ASM as the storage option for database files. You can create a database that uses the file system option during a silent mode installation.

A.1.3 General Procedure for Using Response Files

The following are the general steps to install and configure Oracle products using Oracle Universal Installer in silent or response file mode:

Note:

You must complete all required preinstallation tasks on a system before running Oracle Universal Installer in silent or response file mode.
  1. Create the oraInst.loc file.

  2. Prepare a response file.

  3. Run Oracle Universal Installer in silent or response file mode.

  4. If you completed a software-only installation, then run Net Configuration Assistant and Database Configuration Assistant in silent or response file mode, if required.

These steps are described in the following sections.

A.2 Creating the oraInst.loc File

If you plan to install Oracle products using Oracle Universal Installer in silent or response file mode, then you must manually create the oraInst.loc file if it does not exist. This file specifies the location of the Oracle Inventory directory where Oracle Universal Installer creates the inventory of Oracle products installed on the system.

Note:

If Oracle software was installed previously on the system, the oraInst.loc file might exist. If the file does exist, you do not have to create a file.

To create the oraInst.loc file, follow these steps:

  1. Switch the user to root:

    $ su - root
    
  2. Create the /var/opt/oracle directory if it does not exist:

    # mkdir -p /etc
    
  3. Change the directory:

    # cd /var/opt/oracle
    
  4. Use a text editor to create the oraInst.loc file, containing the following lines:

    inventory_loc=u01/app/oraInventory
    inst_group=oinstall
    

    In this example, inventory_loc is the location of the Oracle inventory; and the inst_group parameter shows the name of the Oracle Inventory group (in this example, oinstall).

  5. Enter the following commands to set the appropriate owner, group, and permissions on the oraInst.loc file:

    # chown oracle:oinstall oraInst.loc
    # chmod 664 oraInst.loc
    

A.3 Preparing a Response File

This section describes the following methods to prepare a response file for use during silent mode or response file mode installations:

A.3.1 Editing a Response File Template

This method is most useful for the Enterprise Edition or Standard Edition installation types.

Oracle provides response file templates for each product and installation type, and for each configuration tool. These files are located in the database/response directory on the installation media.

Note:

If you copied the software to a hard disk, the response files are located in the database/response directory.

Table A-1 lists the response files provided with Oracle Database.

Table A-1 Response Files

Response File Description

db_install.rsp

Silent installation of Oracle Database 11g

grid_install.rsp

Silent installation of Oracle Grid Infrastructure

dbca.rsp

Silent installation of Database Configuration Assistant

netca.rsp

Silent installation of Oracle Net Configuration Assistant


To copy and modify a response file:

  1. Copy the response file from the response file directory to a directory on your system:

    $ cp /directory_path/response/response_file.rsp local_directory
    

    In this example, directory_path is the path to the database directory on the installation media. If you copy the software to a hard drive, then edit the file in the response directory.

  2. Open the response file in a text editor:

    $ vi /local_dir/response_file.rsp
    

    Remember that you can specify sensitive information, such as passwords, at the command line rather than within the response file. "How Response Files Work" explains this method.

    See Also:

    Oracle Universal Installer and OPatch User's Guide for Windows and UNIX for detailed information about creating response files
  3. Follow the instructions in the file to edit it.

    Note:

    The installer or configuration assistants fail if you do not correctly configure the response file. See the "Silent-Mode Response File Error Handling" section for more information about troubleshooting a failed response file mode installation.
  4. Change the permissions on the file to 700:

    $ chmod 700 /local_dir/response_file.rsp
    

    Note:

    A fully specified response file for an Oracle Database installation contains the passwords for database administrative accounts and for a user who is a member of the OSDBA group (required for automated backups). Ensure that only the Oracle software owner user can view or modify response files or consider deleting them after the installation succeeds.

A.3.2 Saving a Response File

You can use Oracle Universal Installer in interactive mode to save a response file, which you can edit and then use to complete silent mode or response file mode installations. This method is useful for custom or software-only installations.

Starting with Oracle Database 11g Release 2 (11.2), you can save all the installation steps into a response file during installation. You can click the Save Response File button on the Summary page to do this. Later, this file can be used for a silent installation.

When you save the response file, you can either complete the installation, or you can exit from Oracle Universal Installer on the Summary page, before it starts to copy the software to the system.

If you save a response file during a silent installation, then Oracle Universal Installer saves the variable values that were specified in the original source response file into the new response file.

Note:

Oracle Universal Installer does not save passwords in the response file.

To save a response file:

  1. Complete the preinstallation tasks listed in Chapter 2.

    When you run Oracle Universal Installer to save a response file, it checks the system to verify that it meets the requirements to install the software. For this reason, Oracle recommends that you complete all of the required preinstallation tasks and save the response file while completing an installation.

  2. If you have not installed Oracle software on this system previously, create the oraInst.loc file as described in "Creating the oraInst.loc File".

  3. Ensure that the Oracle software owner user has permissions to create or write to the Oracle home path that you specify when you run Oracle Universal Installer.

  4. On each Oracle Universal Installer screen, provide the required information.

    See Also:

    "Running Oracle Universal Installer" for information about the installation process
  5. When Oracle Universal Installer displays the Summary screen, perform the following:

    1. Click Save Response File and provide a file name and location for the response file. Then, click Save to save the values to the file.

    2. Click Finish to continue with the installation.

      Click Cancel if you do not want to continue with the installation. The installation stops, but the saved response file is retained.

  6. Before you use the saved response file on another system, edit the file and make any required changes.

    Use the instructions in the file as a guide when editing it.

A.4 Running Oracle Universal Installer Using a Response File

Now, you are ready to run Oracle Universal Installer at the command line, specifying the response file you created, to perform the installation. The Oracle Universal Installer executable, runInstaller, provides several options. For help information about the full set of these options, run the runInstaller command with the -help option, for example:

$ directory_path/runInstaller -help

The help information appears in a window after some time.

To run Oracle Universal Installer using a response file:

  1. Complete the preinstallation tasks listed in Chapter 2.

  2. Log in as the Oracle software owner user (typically, oracle).

  3. If you are completing a response file mode installation, set the DISPLAY environment variable.

    Note:

    You do not have to set the DISPLAY environment variable if you are completing a silent mode installation.
  4. To start Oracle Universal Installer in silent or response file mode, enter a command similar to the following:

    $ /directory_path/runInstaller [-silent] [-noconfig] \
     -responseFile responsefilename
    

    Note:

    Do not specify a relative path to the response file. If you specify a relative path, then Oracle Universal Installer fails.

    In this example:

    • directory_path is the path of the database directory on the DVD or on the hard drive.

    • -silent runs Oracle Universal Installer in silent mode.

      See "Silent-Mode Response File Error Handling"

    • -noconfig suppresses running the configuration assistants during installation, and a software-only installation is performed instead.

    • responsefilename is the full path and file name of the installation response file that you configured.

  5. When the installation completes, log in as the root user and run the root.sh script:

    $ su - root
    password:
    # /oracle_home_path/root.sh
    

A.5 Running Net Configuration Assistant Using a Response File

You can run Net Configuration Assistant in silent mode to configure and start an Oracle Net listener on the system, configure naming methods, and configure Oracle Net service names. To run Net Configuration Assistant in silent mode, you must copy and edit a response file template. Oracle provides a response file template named netca.resp in the response directory in the database/response directory on the DVD.

Note:

If you copied the software to a hard disk, then the response file template is located in the database/response directory.

To run Net Configuration Assistant using a response file:

  1. Copy the netca.rsp response file template from the response file directory to a directory on your system:

    $ cp /directory_path/response/netca.rsp local_directory
    

    In this example, directory_path is the path of the database directory on the DVD. If you cope the software to a hard drive, you can edit the file in the response directory if you prefer.

  2. Open the response file in a text editor:

    $ vi /local_dir/netca.rsp
    
  3. Follow the instructions in the file to edit it.

    Note:

    Net Configuration Assistant fails if you do not correctly configure the response file.
  4. Log in as the Oracle software owner user, and set the ORACLE_HOME environment variable to specify the correct Oracle home directory.

  5. Enter a command similar to the following to run Net Configuration Assistant in silent mode:

    $ $ORACLE_HOME/bin/netca /silent /responsefile /local_dir/netca.rsp
    

    In this command:

    • The /silent option runs Net Configuration Assistant in silent mode.

    • local_dir is the full path of the directory where you copied the netca.rsp response file template.

A.6 Running Database Configuration Assistant Using a Response File

You can run Database Configuration Assistant in response file or silent mode to configure and start an Oracle database on the system. To run Database Configuration Assistant in response file or silent mode, you must copy and edit a response file template. Oracle provides a response file template named dbca.rsp in the database/response directory on the DVD.

Note:

If you copied the software to a hard disk, then the response file template is located in the database/response directory.

See Also:

"Oracle ASM Configuration Assistant Command-Line Interface" section in Oracle Automatic Storage Management Administrator's Guide for information about running Oracle ASMCA in noninteractive mode

This section contains the following topics:

A.6.1 Using Database Configuration Assistant in Response File Mode

Use the -progressOnly flag to set the mode to response file. In the response file mode, Database Configuration Assistant uses values that you specify, in the response file or as command line options, to create a database. As it configures and starts the database, it displays a window that contains status messages and a progress bar. The window that it displays is the same window that is displayed when you choose to create a preconfigured database during an Enterprise Edition or Standard Edition installation.

To run Database Configuration Assistant in response file mode, you must use a graphical display and set the DISPLAY environment variable.

A.6.2 Using Database Configuration Assistant in Silent Mode

Use -silent flag to set the mode to silent. In the silent mode, Database Configuration Assistant uses values that you specify, in the response file or as command-line options, to create a database.

A.6.3 Running Database Configuration Assistant in Response File or Silent Mode

To run Database Configuration Assistant in response file or silent mode:

Note:

Instead of editing the response file template, you can create a database by specifying all required information as command-line options when you run Database Configuration Assistant. For information about the list of options supported, enter the following command:
$ $ORACLE_HOME/bin/dbca -help
  1. Copy the dbca.rsp response file template from the response file directory to a directory on your system:

    $ cp /directory_path/response/dbca.rsp local_directory
    

    In this example, directory_path is the path of the database directory on the DVD. If you copy the software to a hard drive, you can edit the file in the response directory if you prefer.

  2. Open the response file in a text editor:

    $ vi /local_dir/dbca.rsp
    
  3. Edit the file, following the instructions in the file.

    Note:

    Database Configuration Assistant fails if you do not correctly configure the response file.
  4. Log in as the Oracle software owner user, and set the ORACLE_HOME environment variable to specify the correct Oracle home directory.

  5. If you intend running Database Configuration Assistant in response file mode, set the DISPLAY environment variable.

  6. Enter a command similar to the following to run Database Configuration Assistant in response file or silent mode with a response file:

    $ORACLE_HOME/bin/dbca {-progressOnly | -silent} -responseFile \
    /local_dir/dbca.rsp 
    

    In this example:

    • The -silent option runs Database Configuration Assistant in silent mode.

    • The -progressOnly option runs Database Configuration Assistant in response file mode.

    • local_dir is the full path of the directory where you copied the dbca.rsp response file template.

A.7 Postinstallation Configuration Using a Response File

Use the following sections to create and run a response file configuration after installing the Oracle software.

A.7.1 About the Postinstallation Configuration File

When you run a silent or response file installation, you provide information about your servers in a response file that you would otherwise provide manually during a graphical user interface installation. However, the response file does not contain passwords for user accounts that configuration assistants require after the software installation is complete. The configuration assistants are started with a script called configToolAllCommands. You can run this script in response file mode by using a password response file. The script uses the passwords to run the configuration tools in succession to complete the configuration.

If you keep the password file to use for clone installations, then Oracle recommends that you store it in a secure location. In addition, if you must stop an installation to fix an error, you can run the configuration assistants using configToolAllCommands and a password response file.

The configToolAllCommands password response file consists of the following syntax options:

  • internal_component_name is the name of the component that the configuration assistant configures

  • variable_name is the name of the configuration file variable

  • value is the desired value to use for the configuration

The command syntax is as follows:

internal_component_name|variable_name=value

For example:

oracle.assistants.asm|S_ASMPASSWORD=welcome

Oracle recommends that you maintain security with a password response file:

  • Set the permissions on the response file to 600.

  • The response file owner must be the installation owner user, with the group set to the central inventory (oraInventory) group.

A.7.2 Running Postinstallation Configuration Using a Response File

To run configuration assistants with the configToolAllCommands script:

  1. Create a response file using the syntax filename.properties. For example:

    $ touch cfgrsp.properties
    
  2. Open the file with a text editor, and cut and paste the password template, modifying it as needed.

    Example A-1 Password response file for Oracle Grid Infrastructure for a standalone server

    Oracle Grid Infrastructure requires passwords for Automatic Storage Management Configuration Assistant (Oracle ASMCA) and for Intelligent Platform Management Interface Configuration Assistant (IPMICA) if you have a BMC card and you want to enable this feature. Provide the following response file:

    oracle.assistants.asm|S_ASMPASSWORD=password
    oracle.assistants.asm|S_ASMMONITORPASSWORD=password
    

    Example A-2 Password response file for Oracle Database

    Oracle Database configuration requires the SYS, SYSTEM, SYSMAN, and DBSNMP passwords for use with Database Configuration Assistant (DBCA). The S_ASMSNMPPASSWORD response file is necessary only if the database is using Oracle ASM for storage. Also, if you selected to configure Oracle Enterprise Manager, then you must provide the password for the Oracle software installation owner for the S_HOSTUSERPASSWORD response, similar to the following example:

    oracle.assistants.server|S_SYSPASSWORD=password
    oracle.assistants.server|S_SYSTEMPASSWORD=password
    oracle.assistants.server|S_SYSMANPASSWORD=password
    oracle.assistants.server|S_DBSNMPPASSWORD=password
    oracle.assistants.server|S_HOSTUSERPASSWORD=password
    oracle.assistants.server|S_ASMSNMPPASSWORD=password
    

    If you do not want to enable Oracle Enterprise Manager or Oracle ASM, then leave those password fields blank

  3. Change permissions to secure the file. For example:

    $ ls -al cfgrsp
    -rw------- 1 oracle oinstall 0 Apr 30 17:30 cfgrsp
    
  4. Change the directory to $ORACLE_HOME/cfgtoollogs

    Run the configuration script using the following syntax:

    configToolAllCommands RESPONSE_FILE=/path/name.properties

    for example:

    $ ./configToolAllCommands RESPONSE_FILE=/home/oracle/cfgrsp.properties