Skip Headers
Oracle® Database SecureFiles and Large Objects Developer's Guide
11g Release 2 (11.2)

Part Number E18294-01
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Index
Index
Go to Master Index
Master Index
Go to Feedback page
Contact Us

Go to previous page
Previous
Go to next page
Next
PDF · Mobi · ePub

18 Migrating Columns from LONGs to LOBs

This chapter describes techniques for migrating tables that use LONG data types to LOB data types. This chapter contains these topics:

Benefits of Migrating LONG Columns to LOB Columns

There are many benefits to migrating table columns from LONG data types to LOB data types.

Note:

You can use the techniques described in this chapter to do either of the following:
  • Convert columns of type LONG to either CLOB or NCLOB columns

  • Convert columns of type LONG RAW to BLOB type columns

Unless otherwise noted, discussions in this chapter regarding "LONG to LOB" conversions apply to both of these data type conversions.

The following list compares the semantics of LONG and LOB data types in various application development scenarios:

Preconditions for Migrating LONG Columns to LOB Columns

This section describes preconditions that must be met before converting a LONG column to a LOB column.

See Also:

"Migrating Applications from LONGs to LOBs" before converting your table to determine whether any limitations on LOB columns prevent you from converting to LOBs.

Dropping a Domain Index on a LONG Column Before Converting to a LOB

Any domain index on a LONG column must be dropped before converting the LONG column to LOB column. See "Indexes on Columns Converted from LONG to LOB Data Types" for more information.

Preventing Generation of Redo Space on Tables Converted to LOB Data Types

Generation of redo space can cause performance problems during the process of converting LONG columns. Redo changes for the table are logged during the conversion process only if the table has LOGGING on.

Redo changes for the column being converted from LONG to LOB are logged only if the storage characteristics of the LOB column indicate LOGGING. The logging setting (LOGGING or NOLOGGING) for the LOB column is inherited from the tablespace in which the LOB is created.

To prevent generation of redo space during migration, do the following before migrating your table (syntax is in BNF):

  1. ALTER TABLE Long_tab NOLOGGING;

  2. ALTER TABLE Long_tab MODIFY (long_col CLOB [DEFAULT <default_val>]) LOB (long_col) STORE AS (NOCACHE NOLOGGING);

    Note that you must also specify NOCACHE when you specify NOLOGGING in the STORE AS clause.

  3. ALTER TABLE Long_tab MODIFY LOB (long_col) (CACHE);

  4. ALTER TABLE Long_tab LOGGING;

  5. Make a backup of the tablespaces containing the table and the LOB column.

Using utldtree.sql to Determine Where Your Application Needs Change

You can use the utility, rdbms/admin/utldtree.sql, to determine which parts of your application require rewriting when you migrate your table from LONG to LOB column types. This utility enables you to recursively see all objects that are dependent on a given object. For example, you can see all objects which depend on a table with a LONG column. You can only see objects for which you have permission.

Instructions on how to use utldtree.sql are documented in the file itself. Also, utldtree.sql is only needed for PL/SQL. For SQL and OCI, you have no requirement to change your applications.

Converting Tables from LONG to LOB Data Types

This section describes the following techniques for migrating existing tables from LONG to LOB data types:

Using ALTER TABLE to Convert LONG Columns to LOB Columns

You can use the ALTER TABLE statement in SQL to convert a LONG column to a LOB column. To do so, use the following syntax:

ALTER TABLE [<schema>.]<table_name>
   MODIFY ( <long_column_name> { CLOB | BLOB | NCLOB } 
  [DEFAULT <default_value>]) [LOB_storage_clause];

For example, if you had a table that was created as follows:

CREATE TABLE Long_tab (id NUMBER, long_col LONG);

then you can change the column long_col in table Long_tab to data type CLOB using following ALTER TABLE statement:

ALTER TABLE Long_tab MODIFY ( long_col CLOB );

Note:

The ALTER TABLE statement copies the contents of the table into a new space, and frees the old space at the end of the operation. This temporarily doubles the space requirements.

Note that when using the ALTER TABLE statement to convert a LONG column to a LOB column, only the following options are allowed:

  • DEFAULT which enables you to specify a default value for the LOB column.

  • The LOB_storage_clause, which enables you to specify the LOB storage characteristics for the converted column, can be specified in the MODIFY clause.

Other ALTER TABLE options are not allowed when converting a LONG column to a LOB type column.

Migration Issues

General issues concerning migration include the following:

  • All constraints of your previous LONG columns are maintained for the new LOB columns. The only constraint allowed on LONG columns are NULL and NOT NULL. To alter the constraints for these columns, or alter any other columns or properties of this table, you have to do so in a subsequent ALTER TABLE statement.

  • If you do not specify a default value, then the default value for the LONG column becomes the default value of the LOB column.

  • Most of the existing triggers on your table are still usable, however UPDATE OF triggers can cause issues. See "Migrating Applications from LONGs to LOBs" for more details.

Copying a LONG to a LOB Column Using the TO_LOB Operator

If you do not want to use ALTER TABLE, as described earlier in this section, then you can use the TO_LOB operator on a LONG column to copy it to a LOB column. You can use the CREATE TABLE AS SELECT statement or the INSERT AS SELECT statement with the TO_LOB operator to copy data from a LONG column to a CLOB or NCLOB column, or from a LONG RAW column to a BLOB column. For example, if you have a table with a LONG column that was created as follows:

CREATE TABLE Long_tab (id NUMBER, long_col LONG);  

then you can do the following to copy the column to a LOB column:

CREATE TABLE Lob_tab (id NUMBER, clob_col CLOB);  
INSERT INTO Lob_tab SELECT id, TO_LOB(long_col) FROM long_tab;  
COMMIT;

If the INSERT returns an error (because of lack of undo space), then you can incrementally migrate LONG data to the LOB column using the WHERE clause. After you ensure that the data is accurately copied, you can drop the original table and create a view or synonym for the new table using one of the following sequences:

DROP TABLE Long_tab;  
CREATE VIEW Long_tab (id, long_col) AS SELECT * from Lob_tab; 

or

DROP TABLE Long_tab;  
CREATE SYNONYM Long_tab FOR Lob_tab;

This series of operations is equivalent to changing the data type of the column Long_col of table Long_tab from LONG to CLOB. With this technique, you have to re-create any constraints, triggers, grants and indexes on the new table.

Use of the TO_LOB operator is subject to the following limitations:

  • You can use TO_LOB to copy data to a LOB column, but not to a LOB attribute of an object type.

  • You cannot use TO_LOB with a remote table. For example, the following statements do not work:

    INSERT INTO tb1@dblink (lob_col) SELECT TO_LOB(long_col) FROM tb2; 
    INSERT INTO tb1 (lob_col) SELECT TO_LOB(long_col) FROM tb2@dblink; 
    CREATE TABLE tb1 AS SELECT TO_LOB(long_col) FROM tb2@dblink; 
    
  • The TO_LOB operator cannot be used in the CREATE TABLE AS SELECT statement to convert a LONG or LONG RAW column to a LOB column when creating an index organized table.

    To work around this limitation, create the index organized table, and then do an INSERT AS SELECT of the LONG or LONG RAW column using the TO_LOB operator.

  • You cannot use TO_LOB inside any PL/SQL block.

Online Redefinition of Tables with LONG Columns

Tables with LONG and LONG RAW columns can be migrated using online table redefinition. This technique is suitable for migrating LONG columns in database tables where high availability is critical.

To use this technique, you must convert LONG columns to LOB types during the redefinition process as follows:

  • Any LONG column must be converted to a CLOB or NCLOB column.

  • Any LONG RAW column must be converted to a BLOB column.

This conversion is performed using the TO_LOB() operator in the column mapping of the DBMS_REDEFINITION.START_REDEF_TABLE() procedure.

Note:

You cannot perform online redefinition of tables with LONG or LONG RAW columns unless you convert the columns to LOB types as described in this section.

General tasks involved in the online redefinition process are given in the following list. Issues specific to converting LONG and LONG RAW columns are called out. See the related documentation referenced at the end of this section for additional details on the online redefinition process that are not described here.

  • Create an empty interim table. This table holds the migrated data when the redefinition process is done. In the interim table:

    • Define a CLOB or NCLOB column for each LONG column in the original table that you are migrating.

    • Define a BLOB column for each LONG RAW column in the original table that you are migrating.

  • Start the redefinition process. To do so, call DBMS_REDEFINITION.START_REDEF_TABLE and pass the column mapping using the TO_LOB operator as follows:

    DBMS_REDEFINITION.START_REDEF_TABLE(
        'schema_name', 
        'original_table',
        'interim_table', 
        'TO_LOB(long_col_name) lob_col_name',
        'options_flag',
        'orderby_cols'); 
    

    where long_col_name is the name of the LONG or LONG RAW column that you are converting in the original table and lob_col_name is the name of the LOB column in the interim table. This LOB column holds the converted data.

  • Call the DBMS_REDEFINITION.COPY_TABLE_DEPENDENTS procedure as described in the related documentation.

  • Call the DBMS_REDEFINITION.FINISH_REDEF_TABLE procedure as described in the related documentation.

Parallel Online Redefinition

On a system with sufficient resources for parallel execution, redefinition of a LONG column to a LOB column can be executed in parallel under the following conditions:

In the case where the destination table is non-partitioned:

  • The segment used to store the LOB column in the destination table belongs to a locally managed tablespace with Automatic Segment Space Management (ASSM) enabled, which is now the default.

  • There is a simple mapping from one LONG column to one LOB column, and the destination table has only one LOB column.

In the case where the destination table is partitioned, the normal methods for parallel execution for partitioning apply. When the destination table is partitioned, then online redefinition is executed in parallel.

Example of Online Redefinition

The following example demonstrates online redefinition with LOB columns.

REM Grant privileges required for online redefinition.
GRANT execute ON DBMS_REDEFINITION TO pm;
GRANT ALTER ANY TABLE TO pm;
GRANT DROP ANY TABLE TO pm;
GRANT LOCK ANY TABLE TO pm;
GRANT CREATE ANY TABLE TO pm;
GRANT SELECT ANY TABLE TO pm;

REM Privileges required to perform cloning of dependent objects.
GRANT CREATE ANY TRIGGER TO pm;
GRANT CREATE ANY INDEX TO pm;

connect pm/passwd

drop table cust;
create table cust(c_id   number primary key,
                  c_zip  number,
                  c_name varchar(30) default null,
                  c_long long
                  );
insert into cust values(1, 94065, 'hhh', 'ttt');

-- Creating Interim Table 
-- There is no requirement to specify constraints because they are 
-- copied over from the original table.
create table cust_int(c_id   number not null,
                  c_zip  number,
                  c_name varchar(30) default null,
                  c_long clob
                  );

declare
 col_mapping varchar2(1000);
BEGIN
--  map all the columns in the interim table to the original table
 col_mapping :=
               'c_id             c_id  , '||
               'c_zip            c_zip , '||
               'c_name           c_name, '||
               'to_lob(c_long)   c_long';

dbms_redefinition.start_redef_table('pm', 'cust', 'cust_int', col_mapping);
END;
/

declare
 error_count pls_integer := 0;
BEGIN
  dbms_redefinition.copy_table_dependents('pm', 'cust', 'cust_int',
                                          1, true, true, true, false,
                                          error_count);

  dbms_output.put_line('errors := ' || to_char(error_count));
END;
/

exec  dbms_redefinition.finish_redef_table('pm', 'cust', 'cust_int');

-- Drop the interim table
drop table cust_int;

desc cust;

-- The following insert statement fails. This illustrates 
-- that the primary key constraint on the c_id column is 
-- preserved after migration. 

insert into cust values(1, 94065, 'hhh', 'ttt');

select * from cust;

See Also:

The following related documentation provides additional details on the redefinition process described earlier in this section:

Using Oracle Data Pump to Migrate a Database

If you are exporting data as part of a migration to a new database, create a table on the destination database with LOB columns and Data Pump calls the LONG-to-LOB function implicitly.

For details on using Oracle Data Pump, refer to Oracle Database Utilities.

Migrating Applications from LONGs to LOBs

This section discusses differences between LONG and LOB data types that may impact your application migration plans or require you to modify your application.

Most APIs that work with LONG data types in the PL/SQL and OCI environments are enhanced to also work with LOB data types. These APIs are collectively referred to as the data interface for persistent LOBs, or simply the data interface. Among other things, the data interface provides the following benefits:

LOB Columns Are Not Allowed in Clustered Tables

LOB columns are not allowed in clustered tables, whereas LONGs are allowed. If a table is a part of a cluster, then any LONG or LONG RAW column cannot be changed to a LOB column.

LOB Columns Are Not Allowed in AFTER UPDATE OF Triggers

You cannot have LOB columns in the UPDATE OF list of an AFTER UPDATE OF trigger. LONG columns are allowed in such triggers. For example, the following create trigger statement is not valid:

CREATE TABLE t(lobcol CLOB);
CREATE TRIGGER trig AFTER UPDATE OF lobcol ON t ...;

All other triggers work on LOB columns.

Indexes on Columns Converted from LONG to LOB Data Types

Indexes on any column of the table being migrated must be manually rebuilt after converting any LONG column to a LOB column. This includes function-based indexes.

Any function-based index on a LONG column is unusable during the conversion process and must be rebuilt after converting. Application code that uses function-based indexing should work without modification after converting.

Note that, any domain indexes on a LONG column must be dropped before converting the LONG column to LOB column. You can rebuild the domain index after converting.

To rebuild an index after converting, use the following steps:

  1. Select the index from your original table as follows:

    SELECT index_name FROM user_indexes WHERE table_name='LONG_TAB'; 
    

    Note:

    The table name must be capitalized in this query.
  2. For the selected index, use the command:

    ALTER INDEX <index> REBUILD
    

Empty LOBs Compared to NULL and Zero Length LONGs

A LOB column can hold an empty LOB. An empty LOB is a LOB locator that is fully initialized, but not populated with data. Because LONG data types do not use locators, the "empty" concept does not apply to LONG data types.

Both LOB column values and LONG column values, inserted with an initial value of NULL or an empty string literal, have a NULL value. Therefore, application code that uses NULL or zero-length values in a LONG column functions exactly the same after you convert the column to a LOB type column.

In contrast, a LOB initialized to empty has a non-NULL value as illustrated in the following example:

CREATE TABLE long_tab(id NUMBER, long_col LONG);
CREATE TABLE lob_tab(id NUMBER, lob_col CLOB);

INSERT INTO long_tab values(1, NULL);

REM     A zero length string inserts a NULL into the LONG column:
INSERT INTO long_tab values(1, ''); 

INSERT INTO lob_tab values(1, NULL);

REM     A zero length string inserts a NULL into the LOB column:
INSERT INTO lob_tab values(1, '');  

REM     Inserting an empty LOB inserts a non-NULL value: 
INSERT INTO lob_tab values(1, empty_clob());  

DROP TABLE long_tab;
DROP TABLE lob_tab;

Overloading with Anchored Types

For applications using anchored types, some overloaded variables resolve to different targets during the conversion to LOBs. For example, given the procedure p overloaded with specifications 1 and 2:

procedure p(l long) is ...;       -- (specification 1)  
procedure p(c clob) is ...;       -- (specification 2)  

and the procedure call:

declare  
     var  longtab.longcol%type;  
   BEGIN  
     ...  
   p(var);  
     ...  
END;  

Prior to migrating from LONG to LOB columns, this call would resolve to specification 1. Once longtab is migrated to LOB columns this call resolves to specification 2. Note that this would also be true if the parameter type in specification 1 were a CHAR, VARCHAR2, RAW, LONG RAW.

If you have migrated you tables from LONG columns to LOB columns, then you must manually examine your applications and determine whether overloaded procedures must be changed.

Some applications that included overloaded procedures with LOB arguments before migrating may still break. This includes applications that do not use LONG anchored types. For example, given the following specifications (1 and 2) and procedure call for procedure p:

procedure p(n number) is ...;       -- (1)  
procedure p(c clob) is ...;         -- (2)  
  
p('123');                 -- procedure call 

Before migrating, the only conversion allowed was CHAR to NUMBER, so specification 1 would be chosen. After migrating, both conversions are allowed, so the call is ambiguous and raises an overloading error.

Some Implicit Conversions Are Not Supported for LOB Data Types

PL/SQL permits implicit conversion from NUMBER, DATE, ROW_ID, BINARY_INTEGER, and PLS_INTEGER data types to a LONG; however, implicit conversion from these data types to a LOB is not allowed.

If your application uses these implicit conversions, then you have to explicitly convert these types using the TO_CHAR operator for character data or the TO_RAW operator for binary data. For example, if your application has an assignment operation such as:

number_var := long_var;  -- The RHS is a LOB variable after converting. 

then you must modify your code as follows:

number_var := TO_CHAR(long_var); 
-- Assuming that long_var is of type CLOB after conversion

The following conversions are not supported for LOB types:

  • BLOB to VARCHAR2, CHAR, or LONG

  • CLOB to RAW or LONG RAW

This applies to all operations where implicit conversion takes place. For example if you have a SELECT statement in your application as follows:

SELECT long_raw_column INTO my_varchar2 VARIABLE FROM my_table

and long_raw_column is a BLOB after converting your table, then the SELECT statement produces an error. To make this conversion work, you must use the TO_RAW operator to explicitly convert the BLOB to a RAW as follows:

SELECT TO_RAW(long_raw_column) INTO my_varchar2 VARIABLE FROM my_table  

The same holds for selecting a CLOB into a RAW variable, or for assignments of CLOB to RAW and BLOB to VARCHAR2.